|
| 1 | M & L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine andapplying one coat of 2MM thick wall care putty then scrubbing by sand paper to prepare a even surface andapplying priming paint followed by applying one coats of OBD of any colour washing down with watercomplete all as directed. |
| 2 | M & L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine andapplying one coat of 2mm thick wall care putty then scrubbing by sand paper to prepare a even surface andapplying priming paint followed by applying two coats of OBD of any colour washing down with water complete all as directed. |
| 3 | M & L for preparing the old surface of ceilingby washing down and rubbingand removing all loose layers of old treatment,efflorescence , soot and mossby wire brush and filling all nail holes and patches with cement wall putty and applying one or more coat of oil bound distemper on patches to bring the whole surfaceat par and applying one coat of oil bound distemper on ceiling complete all as specified and directed. |
| 4 | M & L for preparing the old surface of wall by washing down and rubbingand removing all loose layers of old treatment,efflorescence , soot and mossby wire brush and filling all nail holes and patches with cement wall putty and applying with roller one coat of plastic emulsion anti fungal, anti vecterial paint (Asian Paints Royal Health Sheild)on walls complete all as specified and directed. |
| 5 | M&L for preparation of old wall surface and applying one coats of cement based paint on old plastered surfaces complete all as specified and as directed |
| 6 | M & L for complete removal of existing treatment from old decorated wall surface by scrapping using electrically operated grinder machine/electric sand paper machine,washing down with water andapplying one coat of 2mm thick wall care putty as levelling course, then scrubbing by sand paper to prepare a even surface andapplying two coats of weather proof Exterior emulsion paint of colour & shade as approved over and including a coat of exterior priming paint complete all as specified and as directed.Make - Asian Apex Ultima or equivalent of make specified in PS. Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work as required. |
| 7 | M&L for preparation of old decorated, wall, chequered floor, roof(corrugal) surface, by brooming and removing all loose layersof old treatment, efflorescence soot and moss by wire brush and filling all nail holes and patches with cement based wall care putty and applying one coat of weather proof Exterior emulsion paint of colour & shade as approved(to match with the Existing surface) complete all as specified and as directed.Make- Asian Apex Ultima or equivalent of make specified in PS. Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work as required. |
| 8 | M&L forpreparing theold painted wooden surfaces of any description exc 10cm width or girth by removing all dirt, dust, rust and grease, stopping and filling the holes and patches and priming the requisite surface with pink primerincl. applying one coat of synthetic enamel paint on patches and then applying one coat of synthetic enamel paint complete all as specified and directed. |
| 9 | M&L forpreparing theold painted steel surfaces of any description exc 10cm width or girth by removing all dirt, dust, rust and grease, stopping and filling the holes and patches and priming the requisite surface with red oxide/Zinc chrome primerincl. applying one coat of synthetic enamel paint on patches and then applying one coat of synthetic enamel paint complete all as specified and directed. |
| 10 | M&L forpreparing theold painted steel/Aluminium surfaces of any description exc 10cm width or girth and applying one coat of spray painting of synthetic enamel paint any colour complete all as specified and directed. |
| 11 | M & L for preparing the old painted wall surface/Kerbstone by brooming and removing all loose layes of old treatment,efflorescence , soot and mossby wire brush and filling all nail holes and patches with cement wall putty and applying one coat of synthetic enamel paint on patches to bring the whole surface at par and applying one coat of synthetic enamel painton walls complete all as specified and directed. |
| 12 | Taking down cement plaster/grit on brick or stone wall etc including raking out joint, hacking for key, scrubbing down with water etc.complete all as specified and directed |
| 13 | M&L 10mm thick polymer modified ready-mix cement based plaster Make : Ultratech (Brand name Readiplast) Complying to IS-1661-1972, IS-2250-1965, IS2402-1963) or equivalent as approved by GE, applied in ratio 1:4 as per manufacturer’s instruction, on fair faces of brick masonry or concrete surface finished even and smooth Complete all as specified and directed |
| 14 | M&L for 10 mm thick cement plaster in cement mortar 1:3 on fair face of brick or concrete surface/ceiling finished even and fair complete all as specified and directed. |
| 15 | M&L for preparation of new wall surface and applying two coats of cement based paint plastered over a coat of cement primer surfaces complete all as specified and as directed |
| 16 | M & L for preparing the newly plastered wall surface and applying one coat of 2mm thick wall care putty as levelling course, then scrubbing by sand paper to prepare a even surface andapplying two coats of weather proof Exterior emulsion paint of colour & shade as approved over and including a coat of priming paint complete all as specified and as directed.Make - Asian Apex Ultima or equivalent of make specified in PS. Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work as required. |
| 17 | M & L for preparing the newly plastered wall surface, applying a coat of 2mm thick wall care putty as levelling course and two coats of OBD over a coat of interior wall primer complete all as specified and directed. |
| 18 | All as per item No 17 above but on ceiling surfaces |
| 19 | M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required, in panels with groove all around as per approved pattern includingscrubbing and washing the top layer with wire brushes and water to expose the stone chippings complete all as specified and as directed.(Note:Payment for providing grooves shall be made separately under respective item of this Schedule) |
| 20 | M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and as directed. |
| 21 | Note - Site shall be handed over to as per availibilty and requirement / piecemeal, Contractor shall have no claim on this acount, payment shall be made as per actual measurement of work done by the contractor |
