Tender For The Miscellaneous Civil Works - Extension And Renovation Worksat Qc Lab Ernakulam Dairy , Thripunithura., ernakulam-Kerala

Tender For The Miscellaneous Civil Works - Extension And Renovation Worksat Qc Lab Ernakulam Dairy , Thripunithura.- 1 Concrete Work:-Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level:1:1.5:3 ( 1 Cement 1.5 Coarse Sand :3 Graded Stone Aggregate 20 Mm Nominal Size 2 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For: Columns, Piers, Abutments, Pillars, Posts And Struts 3 Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level Thermo - Mechanically Treated Bars Of Grade Fe-500D Or More 4 Aluminium Works :- Providing And Fixing False Ceiling With 7.5 Mm Thick Pvc Wooden Grains Panel Board Ceiling Of Approved Quality In Aluminium Frame Work With Necessary Screws Etc Complete 5 Providing And Fixing Aluminium Powder Coated Partitions Partially Glazed With 6Mm Thick Glass ( Saint Gobain ) And Partially Paneled ( 10Mm Thick Multiwood Panel ) With Aluminium Powder Coatedarchitectural Sections Of Size 63.5X38.1X1.5Mmthick As Perarchitectural Drawings And Material Specifications. 6 Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer ( Having Brand Logo With Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm ) With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. ( Basic Rate Rs.1500 / - ) 7 Providing And Fixing Panelled Side Hung Doors Made Of Powder Coated Aluminium Extruded Architectural Sections Of 45Mm Wide Frames For Shutter Having Wall Thickness Of 1.8 ± 0.1 Mm And Appropriate Outer Frames With 8Mm Thick Thomoson Multiwood Panel At Bottom And 6Mm Thick Approved Glass At Top Including Handle, Epdm Gasket, Screws, Fastners, Pivots, Hinges, Lock & Key, Door Stopper Etc. As Per The Drawing And Specifications. 8 Masonry Work :- Solid Masonry Using Pre Cast Solid Blocks ( Factory Made ) Of Size 30X20x15cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level With Thickness 15Cm In : Cm 1:6 ( 1 Cement : 6 Coarse Sand ) Etc Complete 9 Finishing Work :- 12 Mm Cement Plaster Of Mix:1:4 ( 1 Cement : 4 Fine Sand ) 10 Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade: Two Or More Coats On Old Work After Proper Cleaning Of Existing Wall Surface. 11 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 12 Flooring Work :Providing And Laying Vitrified Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) , With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Brand & Manufacturer, In All Colours And Shade, In Skirting, Riser Of Steps, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive ( Water Based ) Conforming To Is : 15477, In Average 6 Mm Thickness, Including Grouting Of Joints ( Payment For Grouting Of Joints To Be Made Separately ) .Size Of Tile 600X600 Mm 13 Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix 0.70 Kg Of Organic Coated Filler Of Desired Shade ( 0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg ) . Including Filling / Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge.Size Of Tile 600X600 Mm 14 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is:15622 Of Approved Make Of Size Approved By Engineer In Charge, In Skirting, Risers Of Steps And Dados , Over 12 Mm Thick Bed Of Cement Mortar 1:3 And Jointing With Grey Cement Slurry@3.3 Kg / Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 15 Roofing Work: Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 16 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing Position And Applying A Priming Coat Of Approved Steel Primer And Two Coat Of Epoxy Paint, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes 17 Providing And Fixing .5 Mm Meta Colour Sheets ( Glavalume Sheet ) ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm ( +0.05% ) , Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Screws Of Size ( 5.5X55mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 18 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm ( + 0.05% ) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is:Mm ( +0.05% ) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling / Self Tapping Screws Complete:Ridges Plain ( 500-600 Mm ) 19 Miscellaneous Work :- Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In-Charge.Nominal Concrete 1:3:6 Or Richer Mix ( I / C Equivalent Design Mix ) 20 Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material With In 50 Metres Lead As Per Direction Of Engineer -In-Charge. 21 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.In Cement Mortar 22 Dismantling Tile Work In Walls Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead.For Thickness Of Tiles 10 Mm To 25 Mm 23 Dismantling Carefully The Existing The Wooden Partitions And Stacking The Materials With In Site As Directed By Engineer In Charge 24 Servicing, Providing And Applying Two Or More Coat Of Synthetic Enamel Paint Of Approved Make And Colour For Fully Or Partially Glazed Windows, Ventilator Etc. After Proper Cleaning The Surface Etc. Complete 25 Dismantling Carefully The Existing Galvanised Iron Sheeted Roof And Stacking The Same With In The Premises Including Cost Of All Labours , Hire Of Tools, Conveying, Cutting The Sheet Into Suitable Size If Necessary, Charges For Scaffolding Etc. Complete As Per The Direction Of Officer In Charge. 26 Dismantling Carefully The Existing Pvc Ceiling With Structural Members And Stacking The Same With In The Premises As Directed. 27 Dismantling Carefully The Old Grills And Grill Doors Including Necessary Enamel Painting As Per The Direction Of Engineer In Charge.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	18-Jan-2024	DATE EXTENSION AND SPECIFICATION	Date	22-01-2024

INR 1100 /-

INR 11000.0 /-

INR 11 Lakhs /-

Name of Work:TENDER FOR THE MISCELLANEOUSCIVIL WORKS - EXTENSION AND RENOVATION WORKSAT QC LAB ERNAKULAM DAIRY , THRIPUNITHURA.

Sl. No.	Item Description
1	CONCRETE WORK:-Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:1.5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size
2	Centering and shuttering including strutting, propping etc. and removal of form work for: Columns, piers, abutments, pillars, posts and struts
3	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more
4	ALUMINIUM WORKS :- Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete
5	Providing and fixing aluminium powder coated partitions partially glazed with 6mm thick glass (saint gobain) and partially paneled ( 10mm thick Multiwood panel)with aluminium powder coated architectural sections of size 63.5X38.1X1.5mmthick as per architectural drawings and material specifications.
6	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. (basic rate Rs.1500/-)
7	Providing and fixing panelled side hung doors made of powder coated aluminium extruded architectural sections of 45mm wide frames for shutter having wall thickness of 1.8 ± 0.1 mm and appropriate outer frames with 8mm thick Thomoson multiwood panel at bottom and 6mm thick approved glass at top including handle, EPDM gasket, screws, fastners, pivots, hinges, lock & key, door stopper etc. as per the drawing and specifications.
8	MASONRY WORK :- Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
9	FINISHING WORK :- 12 mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand)
10	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on old work after proper cleaning of existing wall surface.
11	Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
12	FLOORING WORK :Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm
13	Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm
14	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 OF approved make of size approved by engineer in charge, in skirting,risers of steps and dados ,over 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry@3.3 kg/sqm,including pointing in white cement mixed with pigment of matching shade complete.
15	ROOFING WORK: Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
16	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer and two coat of epoxy paint, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
17	Providing and fixing .5 mm meta colour sheets(Glavalume sheet) (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
18	Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete: Ridges plain (500-600 mm)
19	MISCELLANEOUS WORK :- Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
20	Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
21	Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. In cement mortar
22	Dismantling tile work in walls laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
23	Dismantling carefully the existing the wooden partitions and stacking the materials with in site as directed by engineer in charge
24	Servicing, providing and applying two or more coat of synthetic enamel paint of approved make and colour for fully or partially glazed windows, ventilator etc. after proper cleaning the surface etc. complete
25	Dismantling carefully the existing galvanised iron sheeted roof and stacking the same with in the premises including cost of all labours ,hire of tools, conveying, cutting the sheet into suitable size if necessary, charges for scaffolding etc. Complete as per the direction of officer in charge.
26	Dismantling carefully the Existing PVC Ceiling with structural members and stacking the same with in the premises as directed.
27	Dismantling carefully the old grills and grill doors including necessary enamel painting as per the direction of engineer in charge.