Repair Of Jateswar Ashram Hostel St Within Falakata Block Under Alipurduar District
Tender Value
11.70 Lakhs
Estimated cost
Bid Submission
16 Jan 2024
0 days left
EMD
23413
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
falakata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Of Jateswar Ashram Hostel St Within Falakata Block Under Alipurduar District
BOQ
| Sl. No. | Item Description |
| 1 | Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specificermission of Engineer-in-Charge prior to execution will be necessary). (Payment to be made on area cleared) |
| 2 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. |
| 3 | Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed. |
| 4 | Dismantling worn out wall or ceiling of Tarja or Durmamat and removing the dismantled materials as directed |
| 5 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 6 | Cement concrete with 30 mm down graded shingles excluding shuttering.N.B. Variety |
| 7 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary With 1:6 cement mortar20 mm thick plaster |
| 8 | Colour washing with any shade with Stainers, as required including cleaning and smoothening surface thoroughlyInternal surface (All floors)Two coats |
| 9 | Ceiling with 12mm thick wooden planks fitted and fixed complete (excluding the supporting framework) as per direction of the Engineer-in-charge |
| 10 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. Sal : Local |
| 11 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction Tor steel/Mild Steel SAIL/ TATA/RINL |
| 12 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works ( |
| 13 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. |
| 14 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 600 mm long |
| 15 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 300 mm long |
| 16 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992, Single Socketed 3 Meter Length, 160 mm |
| 17 | Fittingsof UPVC pipes (B Type) & fittings conforming to IS-13592-1992 , Bend 87.5º, 160 mm |
| 18 | Supply ofRubber Lubricant 500 ml |
| 19 | Supply ofSolvent Cement 250 ML |
| 20 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. Under ground 160 mm |
| 21 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. |
| 22 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as perdirection of the EIC. |
| 23 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. |
| 24 | M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction ofEngineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates areConsidered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.For trusses spanning up to 12.00 m |
| 25 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).With 0.50 mm thick sheet |
| 26 | Aluminium sheet ridging fitted with self tapping screws, EPDM washers etc complete.(Minimum 225mm end lapping). A) 300 mm lapping each way ,With 0.71 mm sheet |
| 27 | Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) , 20 mm |
| 28 | Supplying, fitting and fixing bib cock or stop cock.Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO / ATLAS or equivalent)15 mm |
| 29 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 30 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 31 | Supplying, fitting & fixing of high speed with wide blade (1200 mm) with 2 years warrenty, double ball bearing facilities (Bajaj/ Crompton/ Usha) with approved brand. |
| 32 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On steel or other metal surface : With other than hi-gloss of approved quality- |
| 33 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :On timber or plastered surface : Two coats (with any shade except white) |
| 34 | Supply and Delivery of ceiling fanscomplete with all accessories having the following Model / Cat No.( Make - Orient /Khaitan/ Crompton / similar equivalent type) |
| 35 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS |
| 36 | Supply & Fixing Socket type electronic fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board as per GS |
| 37 | Supply and Delivery of single/twin fluorescent light fitting inthe ceilingfixed with “L” type MS clamp as per GS Philips make Cat No. TMC 55 or 501 P1xT-LED 22W P3241 or equivalent make CG / Philips/ bajaj / syska / equivalent similar type |
| 38 | Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc |
| 39 | Supplying, Fitting & fixing of Badminton court post&all other necessary equipments complete Set (both Side) Badminton Court Dimensions: The full length of the current widely-used rectangular court is 13.4 metres or 44 feet. The full width of the court is 6.1 metres or 20 feet. With the sidelines restricting the singles court, the width of the court for singles players comes down to 5.18 metres or 17 ft.Badminton Net: The net divides the court into two halves. It is 5 feet or 1.524 metres tall in the middle whereas its height increases to 5 ft 1 inch or 1.55 metres at the edges.Centre Line: The Centre Line runs through the width of the court from the short service line to the back boundary line and divides the service court into the left and right service courts.Short Service Line: It is situated at a distance of 6 ft 6 inch or 1.98 metres from the net and that area between the net and the short service line has been termed the non-volley zone.Long Service Line for Doubles: This is drawn about 2 ft 6 inch or 0.76 metres from the back boundary line.Side-Line for Singles: It is drawn 1.5 feet or 0.457 metres from the doubles sideline.Side-Line for Doubles: It is the outermost sideline of the court and is used for doubles.Back Boundary Line and Long Service Line for Singles: It is the outermost back line of the court and it stays the same for singles as well as doubles play |
| 40 | Supply of Iron CotSingle Bed size: 4 ft X 6 ft as per direction by EIC |
| 41 | Supply of Aquaguard Aura 7 L RO + UV + UF + MTDS Water Purifier Active Copper technology(Black) |
| 42 | Add GST @ 18% |
| 43 | Add Labour welfare Cess @ 1% |
AI Tender Summary
Tender Timeline
Dec 29, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 16, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 19, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender