|
| 1 | Dismantling the existing electrical installation as per requirement by Co\"s own tools, tackles & manpower maintaining normalcy as far as possible and depositing the dismantalled damaged materials to the Sectional Store of PWD and mending good the damages upto the satisfaction of Authority / PWD. |
| 2 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection [D-6/7],Make: Legrand, Schneider, Siemens, Crabtree |
| 3 | SP(10A) |
| 4 | SP(16A) |
| 5 | SP(32A) |
| 6 | DP(6-32A) |
| 7 | TP(63A) |
| 8 | FP(63A) |
| 9 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. (D-5/6), Make:Legrand, Schneider, Siemens, Crabtree |
| 10 | DP(40A) For Incoming |
| 11 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Make: Gloster/KEI//Ploycab/RR kable) in 20mm size PVC rigid conduit \"FR\" (Precision mms), with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. [E-24/1] |
| 12 | Average run 8 mtr |
| 13 | Average run 10 mtr |
| 14 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Make: Gloster/KEI//Ploycab/RR kable) in 20mm size PVC rigid conduit \"FR\" (Precision mms), with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [E-14/2] |
| 15 | Average run 8 mtr |
| 16 | Average run 10 mtr |
| 17 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Make: Finlox/Havells//Ploycab/RR kable) partly in 20mm size PVC rigid conduit \"FR\" (Precision make) [for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed] (E25/5) |
| 18 | Average run 8 mtr |
| 19 | Average run 10 mtr |
| 20 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Make: Finlox/Havells//Ploycab/RR kable) partly in 20mm size PVC rigid conduit \"FR\" (Precision mms) [for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed] -- 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC [E-16/6] |
| 21 | Average run 8 mtr |
| 22 | Average run 10 mtr |
| 23 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire (Make: Finlox/Havells//Ploycab/RR kable) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish-2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC-[E-20/3] |
| 24 | On Board |
| 25 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Make: Gloster/KEI//Ploycab/RR kable)in 20mm size PVC rigid conduit \"FR\" (Precision mms), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish -- 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC [E-15/4] |
| 26 | On Board |
| 27 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Make: Gloster/KEI//Ploycab/RR kable) in 20mm size PVC rigid conduit \"FR\" (Precision mms), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works |
| 28 | On Board |
| 29 | Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Anchor) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board (Box should be CRC punch type and RO Primer Coated Painted) and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.[E-6/22] |
| 30 | Supply & Fixing 240 V, 2 nos. 6A Socket with separate 2 nos. 6 A Piano key type switch (Mk. Anchor) on sheet metal switch board embedded in wall incl. S & F 175 x 100 x 65mm MS (16SWG) switch board with Ph, N, E Bar and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [E3/10, E4/12, E5/14 & 15] |
| 31 | Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 40x200x65mm MS (16SWG) switch board and bakelite/ perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (E7/26) |
| 32 | Supply & Fixing 240 V, 20 A Piano key type Socket (Anchor) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (E6/17b) |
| 33 | Supply & Fixing 240 V,25 A, 3 pin plug top with indicator (Brand approved by EIC) & necy. Connections[E-17/5b] |
| 34 | Supply & Fixing Socket type fan regulator (Step type) (Mk.Anchor) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. (E6/18) |
| 35 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Legrand Myrious/Crabtree/ Anchor Roma) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (E18/9b) |
| 36 | Supply & Fixing 2 Nos. 240 V, 6 A, 3 pin Modular type plug socket (Legrand Myrious/Crabtree/ Anchor Roma) with 2 Nos. 6A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 37 | Supply & Fixing 3 Nos. 240 V, 6 A, 3/5 pin & 1 No. 240V, 16A, 3/6 Pin Modular type plug socket (Legrand Myrious/Crabtree/ Anchor Roma) with 3 Nos. 6A & 1 No. 16A Modular type switch, 16A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 Row 18 Module GI Modular type switch board with 2 Row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 38 | Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Legrand Myrious/Crabtree/ Anchor Roma) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. (E18/10) |
| 39 | Supply & Fixing 240 V, 25 A, Modular type starter (Anchor Roma / Legrand Myrus / North West) with 25A Modular switch type DP MCB (C Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (E19/17) |
| 40 | Supply and delivery of Single LED Fitting (1 X 20Watt, 230VAC, 50hZ,4000K NW, THD<10%, bult in 2.5KV SPD) with all accessories and 1 nos LED Tube [Make: PHILIPS(TMC501P1XT-LED22WP3241)/ BAJAJ / WIPRO/ Crompton with 3 Years warrenty |
| 41 | Supply and delivery of Twin LED Fitting (2 X 20Watt, 230VAC, 50hZ,4000K NW, THD<10%, bult in 2.5KV SPD) with all accessories and 2 nos LED Tube [Make: PHILIPS(TMC501P2XT-LED22WP3241)/ BAJAJ / WIPRO/ Crompton with 3 Years warrenty |
| 42 | Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling with supplied clamps with LED tube lights on HW block or plates, nipples etc. as required as per direction of the EIC. (C2/14c) |
| 43 | Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.[C-2/17] |
| 44 | Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. (C2/16) |
| 45 | Supply and delivery of 230Vrated 48\" (1200mm) sweep ceiling fan complete with accessories [Make : Usha Stricker/Crompton HS Plus/Orient Summer King) |
| 46 | S &D of 900mm AC Ceiling Fan with safty wire S3 capacitor (Make : Usha Stricker/Crompton HS Plus/Orient Summer King) with 2 years warrenty |
| 47 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.[C-3/21a] |
| 48 | Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) (D14/29) |
| 49 | Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe 19 mm dia 3 mm thick polythene pipe without earth continuity wire, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works. (E2/3a) |
| 50 | Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge polythene pipe 25 mm dia 3 mm thick polythene pipe without earth continuity wire, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works. |
| 51 | Supplying and fixing PVC Rigid Conduit \"FR\" [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works (E16/7) |
| 52 | 20 mm Size |
| 53 | 25 mm Size |
| 54 | Supplying and Drawing 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene pipe / casing and by the prelaid GI fish wire and making necy. connection as required (Mk. RR Kable, KEI, Polycab/Gloster). |
| 55 | 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC |
| 56 | 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC |
| 57 | 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC |
| 58 | 2x22/0.3 (1.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC |
| 59 | Finishing of the PVC insulatedCopper wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. (F-5/9) |
| 60 | 6 sqmm |
| 61 | 4 sqmm |
| 62 | 2.5sqmm |
| 63 | 1.5 sqmm |
| 64 | Engraving the deptt. number with 10 mm lettering on the body of fan / T/L / Ex Fan / BH upto 10 letters incl. hifen, stroke or stop. (C3/24a) |
| 65 | Extra for additional one letter incl. hifen, stroke and stop (C3/24b) |
| 66 | Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. (For Bracket Arm of Pole) |
| 67 | a. 1st coat of aluminium paint over one coat of RO priming |
| 68 | b. 2nd coat of aluminium paint over 1st coat |
| 69 | Painting Block Letters or Digits within a circle/square as required, with ”Black Japan” paint of approved make & brand, the size of letters and digits as given below |
| 70 | a. Size 40 mm and upto 50 mm |
| 71 | b. Size 50 mm and upto 75 mm |
| 72 | S&F AC / Street light Timer DB (Water Proof) concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment and febricated with following items as per instructions ofEIC i) 240 V, 6-32 A SPMCB of breaking capacity 10KA & \"\"C\"\" Charecteristic-- 01 noii) 240V 6-32 A DP MCB Isolator on din rail--- 01 No.iii) 240V , 2P, Power Contractor (rating above 20 Amp) with accessories ----- 01 noiv) Astronomical / Digital timer switch --- 01nov) Toggle switch for manual/auto operation--- 01no. vi)Double door 2+4 Way SPNDB ---- 1Novii)Necessary connection by copper wire.[Make : Siemens, Legrand, L&T] |
| 73 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:ByISI-Medium GI pipe [G-1/2a] |
| 74 | Excavation of soil for installation of Earth Electrode and filling & ramming.For Soft Soil [G-1/1a] |
| 75 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe (G2/3a) |
| 76 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [G-2/4a] |
| 77 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages Solid GI Wire: No.8 SWG[G-2/5] |
| 78 | Supply & Delivery 1.1 KV grade LT Aluminium PVC/XLPE Armoured cable ( Make-KEI/Gloster / Polycab / RR Kabel) as per direction of EIC. The cable shall conform to IS 7098/ Part I with anti termite and anti rodent features. |
| 79 | 4 / 3.5 Core 10 sq.mm. |
| 80 | 4 / 3.5 Core 16 sq.mm. |
| 81 | 4 / 3.5 core 35 sq.mm |
| 82 | 4 / 3.5 core 70 sq.mm |
| 83 | 4 / 3.5 core 95 sq.mm |
| 84 | 4 / 3.5 core 120 sq.mm |
| 85 | Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [F-1/2b] |
| 86 | Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting [F-1/2c] |
| 87 | Laying of cable above 3½ core 50 sqmm and upto 3½ core 90sqmm on wall/surface including S & F MS clams with earthingattachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. asnecy., mending good damages and painting [F-1/2d] |
| 88 | Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting [F-1/2e] |
| 89 | Laying only Cable above 50 sqmm but not exceeding 400sqmm through existing RCC/ Hume/GI Pipe/open masonary trench for single, 2, 3, 3½ and 4 core [F-1/3b] |
| 90 | Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed [F-2/1b] |
| 91 | Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish [F-3/5] |
| 92 | From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc. |
| 93 | Above 35 sqmm to 95 sqmm at an average depth of 100 mm in floor/pavement/ wall etc. |
| 94 | Above 95 sqmm at an average depth of 100 mm in floor/pavement/wall etc. |
| 95 | S&F PVCl waterproof IP66 loop box with coonector bar |
| 96 | 155x210x92 mm |
| 97 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry (Mk. Dowels) of XLPE/PVC armoured cables as below : [ F-4/7] |
| 98 | 4 core 10 sqmm |
| 99 | 4 Core 16 sq.mm. |
| 100 | 4 core 35 sq.mm |
| 101 | 4 core 70 sq.mm |
| 102 | 4 core 95 sq.mm |
| 103 | 4 core 120 sq.mm |
| 104 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. [F-5/8b] |
| 105 | 4 core 10 sqmm |
| 106 | 4 Core 16 sq.mm. |
| 107 | 4 core 35 sq.mm |
| 108 | 4 core 70 sq.mm |
| 109 | 4 core 95 sq.mm |
| 110 | 4 core 120 sq.mm |
| 111 | Dismentling of cables (both HT & LT both) from existing position from underground trench (after necessary dismantling from termination & gland socket) and keeping the same at sectional store / at safe place at good condition at cable drum of following sizes as mentioned below: |
| 112 | 3.5 core above 35 sqmm and upto to 185 sqmm |
| 113 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. (F6/11) (For fixing over wall on building, pipe must be provided with necessary MS Clamp) |
| 114 | 50 mm dia |
| 115 | Fixing only outdoor / street light type fluorescent light fitting or MV/LED light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. [ C-3/18] |
| 116 | Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint. [H-5/5] |
| 117 | S & D of following Led Light Fiiting: |
| 118 | 2\"x2\" Recessed mounted LED Fittings (Make: Philips-Full Glow-36W) |
| 119 | 18\" Round type recessed mounted Led fittings(18W) [Make: Philisps-Ultraslim, Magik, Wipro] |
| 120 | Recessed Mounted Spot light fitting (7W-WW)(Make:Phillips-7W Sky COB Tilt LED Spotlight-WW/Crompton/Wipro) |
| 121 | 1\"x1\" Surface Mounted Led Fitting (16W) (Make:Philips- SM200C LED16S 6500PSU OD WH) |
| 122 | Surface Mounted LED Fitting( Round Type)(Make: Crompton:PEARL NIO-S-LCDSPLN-R-12-CDL Philips/ Wipro) |
| 123 | LED bulk head light fitting (Philips make, cat no-- WT202W P LED 6S CW PSU S1 PC P3495 or eqv. Surya /Benlo/Wipro /with 3 years warrenty . 10 wattscomplete set. |
| 124 | LED Street Light (230vac, 39w 6500K, IP 66, THD<10%,bult in 2.5 KV SPD) with all necessary connection. [Make: Phillips-BRP046 LED39 CW MR S1 PSU GR /Wipro/Magik with 5 years warrenty . |
| 125 | LED Street Light Light (230vac, 84w to 150Watt, 6500K, IP 66, THD<10%,bult in 2.5KV SPD) with all necessary connection. Make: PHILIPS-BRP062 LED 84 CW SLC S1 PSU/Wipro/ Crompton with 5 years warrenty . |
| 126 | LED Flood Light Light (230vac, 100w , 6500K, IP 66, THD<10%,bult in 2.5KV SPD) with all necessary connection. Make: PHILIPS-BVP192 LED100 CW NB FG A1 GR PSU/Wipro/ Crompton with 5 years warrenty . |
| 127 | LED Flood Light Light (230vac, 30w , 6500K, IP 66, THD<10%,bult in 2.5KV SPD) with all necessary connection. Make: PHILIPS-BVP120 LED35 CWFG S1 PSU GR/Wipro/ Cromptonwith 5 years warrenty . |
| 128 | Fixing of LED compound light in existing arm bracket pole / mini pole inluding necessary connection. |
| 129 | Fixing of LED Bulk Head light fiting on wall inluding necessary connection. |
| 130 | Supply & delivery of 240V,3 blade, 1420 rpm, 400mm (16\")dia full metal body & blade Wall Bracket fan. (Make - EPC TempestCrompton / Orient Wall II Tornedo - as per direction of EIC). |
| 131 | Fixing of WB Fan with necessary rug bolt incl S&F of Wooden Board inluding necessary connection. |
| 132 | S & D of 230V 30cm(12\") Heavy Duty 1420 RPM Exhaust fan with all necessary accessories [Make: EPC , CG, Orient](With 2 Yeras Warrenty) |
| 133 | S & D of 230V 23cm(9\") Heavy Duty 1370 RPM Exhaust fan with all necessary accessories [Make: EPC , CG, Orient](With 2 Yeras Warrenty) |
| 134 | Fixing of Ex Fanon wall by necessary fixing arrangement inluding necessary connection as per GS[C-4/28] |
| 135 | Supply and delivery of LED T/L (20Watt, 230VAC, 50hZ,4000K-6500K NW, THD<10%) with PC body [Make: PHILIPS/BAJAJ/ WIPRO / Crompton Prisom pro with 3 yeras warrenty |
| 136 | Fixing of LED T/L on existing fittings. |
| 137 | Supply & Delivery40/36watt Electrnic Ballast for florescent fittings [ Philips/ Bajaj] |
| 138 | S & D of 9W Led lamp-BC Type(Make: Philips/Crompton/Wipro) |
| 139 | S & D of 12W Led lamp-BC Type(Make: Philips/Crompton/Wipro) |
| 140 | Supply & Delivery2.5 MFD oil type fan capacitor [Make- Tripcon with metal body/Havells). |
| 141 | S & D of Following Switches/ Socket/ Plug/Call Bell/Ac Starter |
| 142 | 5A , 230V SP Switch (Piano Type) (anchor) |
| 143 | 15A , 230V SP Switch (Piano Type) (anchor) |
| 144 | 5A , 230V SP Switch (Moduler Type) (Make: Cabtree-Murano) |
| 145 | 15A , 230V SP Switch (Moduler Type) (Make: Cabtree-Murano) |
| 146 | 5A , 230V SP Switch (Moduler Type) (Make: CabtreeThamesWhite) |
| 147 | 15A , 230V SP Switch (Moduler Type) (Make: Cabtree-ThamesWhite) |
| 148 | 5A , 230V SP Switch (Moduler Type) [Make: Scheider-Livia] |
| 149 | 15A , 230V SP Switch (Moduler Type) [Make: Scheider-Livia] |
| 150 | 5A , 230V SP Switch (Moduler Type) : [Make: Legrand-Myrius] |
| 151 | 15A , 230V SP Switch (Moduler Type) [Make: Legrand-Myrius] |
| 152 | Call Bell switch(Box Type) (anchor) |
| 153 | Call Bell switch (Moduler Type) (Make: Cabtree-Murano) |
| 154 | Call Bell switch (Moduler Type) (Make: Cabtree-ThamesWhite) |
| 155 | Call Bell switch (Moduler Type) [Make: Legrand-Myrius] |
| 156 | 5A Socket (Piano Type) (anchor) |
| 157 | 5A Socket(Moduler Type) (Make: Cabtree-Murano) |
| 158 | 5A Socket (Moduler Type) (Make: CabtreeThamesWhite) |
| 159 | 5A Socket(Moduler Type) [Make: Scheider-Livia]) |
| 160 | 5A Socket (Moduler Type) [Make: Legrand-Myrius] |
| 161 | 15A Socket (Piano Type) (anchor) |
| 162 | 15A Socket(Moduler Type) (Make: Cabtree-Murano) |
| 163 | 15A Socket (Moduler Type) (Make: CabtreeThamesWhite) |
| 164 | 15A Socket(Moduler Type) [Make: Scheider-Livia] |
| 165 | 15A Socket (Moduler Type) [Make: Legrand-Myrius] |
| 166 | Fan Regulator (Piano Type) (anchor) |
| 167 | Fan Regulator(Moduler Type) (Make: Cabtree-Murano) |
| 168 | Fan Regulator (Moduler Type) (Make: CabtreeThamesWhite) |
| 169 | Fan Regulator(Moduler Type) [Make: Scheider-Livia] |
| 170 | Fan Regulator (Moduler Type) [Make: Legrand-Myrius] |
| 171 | AC Starter-25A-[Make: North-West] |
| 172 | AC Starter-25A-(Make: Cabtree-Murano) |
| 173 | AC Starter-25A-[Make: CabtreeThamesWhite) |
| 174 | AC Starter-25A-[Make:Scheider-Livia] |
| 175 | AC Starter-25A-[Make: Legrand-Myrius] |
| 176 | 25A , 3 Pin Plug top . {Make: Anchor/ Cabtree/ Northwest} |
| 177 | S & D of Astronomical Time switch (Make: Hagger-EH110) |
| 178 | Supply & Deliveryoffollowing cu wire(1.1KV Gr, PVC Insulated) |
| 179 | 1.5 sq . Mm.copper wire(polycab / KEI/ Gloster) |
| 180 | 2.5 sq . Mm.copper wire(polycab / Mascab/ Gloster) |
| 181 | 4 sq . Mm.copper wire(polycab / KEI/ Gloster) |
| 182 | Supply & Deliveryof Steel Grip Tape |
| 183 | S& D of PVC insulated Hook Wire(Cu)for Tube light fittings |
