Institute Of Medical Sciences-IOMS has published Tender For Construction Of Brick Drain, Footpath, Cgi And Fencing Wall ( Inside ) Painting Of The Directors Quarter, Rims, Imphal.. Submission Date for this Tender is 15-01-2024. Footpath Work Tenders in Imphal West Manipur. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.5m, as directed by the Engineer-in- Charge. |
| 2 | All kinds of soil |
| 3 | Providingandlayinginpositioncementconcreteofspecified grade excluding the cost of centering and shuttering - |
| 4 | All work upto plinth level: |
| 5 | 1:4:8 (1 cem :4 c/sand :8 graded stone aggregate 40 mm nom size) |
| 6 | 1:2:4 (1 cem :2 c/sand :4 graded stone aggregate 20 mm nom size) |
| 7 | Brick work with Ist class common burnt clay F.P.S. (non modular) bricksin foundation and plinth in: |
| 8 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 9 | HalfbrickmasonrywithIstclasscommonburntclayF.P.S.(non modular) bricksin superstructure above plinth level upto floor V level in |
| 10 | Cement mortar 1 : 3 (1 cement : 3 coarse sand) |
| 11 | Supplying and filling in plinth with sandy soil under floors including, watering,ramming consolidating and dressing complete. |
| 12 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : |
| 13 | 1:4(1 cement: 4 fine sand) |
| 14 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. |
| 15 | Using M.S. angels 40x40x6 mm for diagonal braces. |
| 16 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 17 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 18 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 19 | External work |
| 20 | 20 mm nominal outer dia Pipes |
| 21 | Supplying and installing a portable plastic septic tankmake or like of approved quality by Engineer in charge including the cost of carriage charge,with all laying,fitting and fixtures complete. |
| 22 | 1000 lts |
| 23 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 24 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes |
| 25 | 75 mm diameter |
| 26 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. |
| 27 | Coupler |
| 28 | 75 mm |
| 29 | Single push fit Coupler: |
| 30 | 75 mm |
| 31 | Single tee with door |
| 32 | 75x75x75 mm |
| 33 | Bend 87.5° |
| 34 | 75 mm bend |
| 35 | Shoe (Plain) |
| 36 | 75 mm Shoe |
| 37 | Removing white or colour wash by scraping and sand papering the surface including necessary repairs to the scratches etc. |
| 38 | PaintingonG.S.sheetwithsyntheticenamelpaintofapproved brand and manufacture of required colour to give an even shade : |
| 39 | Old work (one or more coats) |
| 40 | Finishing walls with textured exterior paint of required shade : |
| 41 | Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10sqm. |
| 42 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give aneven shade : |
| 43 | One or more coats on old work |
| 44 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
