Tender For Construction Of Bsl-Iii Lab At Zakura Srinagar
Tender Value
3.51 Crore
Estimated cost
Bid Submission
22 Jan 2024
0 days left
EMD
7.02 Lakhs
Bank guarantee accepted
Document Fee
5500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
zakura → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Bsl-Iii Lab At Zakura Srinagar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Jan-2024 | time extension | Date | 15-Jan-2024 |
| 2 | 13-Jan-2024 | corrigendum | Date | 22-Jan-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Clearance of site by way of Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth,lead upto 50 meter and lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil : |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil |
| 3 | Providing and laying of stone soling hand packed and compacted with hand roller including carriage complete. |
| 4 | Providing and laying in position cement concrete of 1:4:8 grade excluding the cost of centering and shuttering. All work upto plinth level (Crushed aggregate 40mm). |
| 5 | Carriage of Materials by Mechanical Transport for an average lead of15 Kms QTY Vide Item No 6 |
| 6 | Providing and laying in position reinforced cement concrete with nominal mix of 1:1.5:3, using 20mm thick crushed stone agg. Excluding the cost of centring, shuttering, finishing and reinforcement. All work upto plinth level |
| 7 | Carriage of Materials by Mechanical Transport for an average lead of15 Kms QTY Vide Item No 7 |
| 8 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness)including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 9 | Carriage of Materials by Mechanical Transport for an average lead of15 Kms QTY Vide Item No 8 |
| 10 | Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering 1:3:6 mix (1 Cement: 3 coarse sand: 6 graded Crushed Stone aggregate 20mm nominal size).All work upto plinth level |
| 11 | Carriage of Materials by Mechanical Transport for an average lead of15 Kms QTY Vide Item No 9 |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircasesand spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Carriage of Materials by Mechanical Transport for an average lead of15 Kms QTY Vide Item No 10 |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form work for foundation footings, bases of columns. |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form work for Walls (any thickness) including attached pilasters, buttresses, plinth andstring courses etc. |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilever |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form work for Columns, pillars piers |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form work for suspended floors, roofs, landings balconies and access platforms. |
| 19 | Edges of slabs and breaks in floors and walls under 20cms wide |
| 20 | Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. HYSD reinforcement of grade Fe-500D steel bars at all levels. |
| 21 | Providing / laying of Nallah stone boulders (RBM) with maximum size of stone agg, not exceeding 90 mm including carriages of all materials with loading , unloading and staking complete |
| 22 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming & watering lead upto 50mtrs and lift upto 1.5m. |
| 23 | Providing and fixing of 20mm dia 450mm long bolt full thread with nuts and washers for anchoring the steel structure incl welding the bolts at bottom with 20 mm flat iron strip of at least 200mm long complete job. |
| 24 | Structural steel work riveted or bolted in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer with all carriages etc. all complete. |
| 25 | P/F high rib colour coated sheets of 0.5 mm thickess for roofing including hooks, bolts and nuts 8mm diameter or with PVC. limpet washers complete up to any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 26 | Providing ridges or hips of 60 cm over all width of plain pre-coated sheets fixed with SMP coated complete: |
| 27 | Providing valleys of 90cm wide overall in plain G.S. sheets fixed withpolymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet andbitumen washers complete.1.00 mm thick with zinc coating not less than 275 gram/m2 |
| 28 | Providing and fixing of 300 x 35mm thick Ist class budloo wood eaves boarding incl cost of nails etc complete job |
| 29 | P/F of 12mm thick T&G planks made of imported wood (New zealand pine or equivalent) for roof soffits &Ceilingon wood work in false ceiling, partitions sawn and put-up in position in budloo wood (Frame work).including cost of necessary adhesive &cost of nails etc.complete job.incl cost of nails / screws incl cost of Polish/ Finishing to be approved by Engineer-in-charge. |
| 30 | Brickworkwithcommonburntclay(non-modular)bricksofclassdesignation7.5in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 31 | Carriage of Materials by Mechanical Transport for an average lead of15 Kms QTY Vide Item No 25 |
| 32 | Providingwoodworkinframesofdoors,windows,clerestorywindowsand other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) in 2nd class kail wood |
| 33 | Providingandfixing 35 mm panelledorpanelledandglazedshuttersfordoors,windows and clerestory windows fixing with butt hinges of required size with necessary screws excludingpanellingwhichwillbepaidforseparately,all completeasperdirectionofEngineer-in-charge in 2nd class kail wood |
| 34 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered framewith in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made9.149D.3 Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm upto 2.50 sqm) |
| 35 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.)22.3.1 With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
| 36 | Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides Conforming to IS : 3097 grade 1 |
| 37 | Painting with wood primer of approved make one or more coats on new work all charges, complete job |
| 38 | Painting with synthetic enamel paint ( one or more coats on New work) of approved brand and manufacturer to give an even shade New work. |
| 39 | Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering 1:2:4 mix (1 Cement: 2 coarse sand: 4 graded Crushed Stone aggregate 20mm nominal size) All Work upto floor v level (Levelling Course), incl c/o of glass strips where ever required. |
| 40 | 15mm thick cement plaster on the rough side of single or half brick wall for internal/external walls of mix 1:6 (1 cement :6 fine sand),incl. cost of scaffolding complete job. |
| 41 | Preparing plastered surfaces with Cement based wall puttywith 2mm thickness of approved brand and manufacture, on new surfaces |
| 42 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New Work (two or more coats over) and including priming coat with cement primer |
| 43 | Finishingwallswithacrylicsmoothexteriorpaintofrequiredshadeon Newwork([email protected]/10sqmoverand including priming coat of exterior primer applied @ 2.20kg/10sqm) complete including allnecessary scaffolding etc. |
| 44 | ProvidingandfixingIstqualityceramicglazedwalltilesconformingtoIS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, incl. pointing in white cement mixed with pigment of matching shade complete. |
| 45 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 46 | Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thickbase of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: Black zebra |
| 47 | Supply and installation of satin finish stainless steel AISI 304 stainless steel handrail and balustrade system having 50mm dia tube handrail (1.5mm gauge)weight 3.70 kg,erected with chemical grout to be fixed on the top of slab/skirting (Spigot Fixed) at max c/c distance of 600mm complete with all necessary bends and terminations complete, with cover plate, fixings, end terminations, custom bends, as manufactured by Dline or approved equivalent. Height shall be 1050 mm above the finished skirting level complete as per architectural drawings, pattern & design to be approved by Engineer-in-charge. LENGTH of Stairs & Opening=47 Rm |
| 48 | Supply and installation of satin finish stainless steel AISI 304 stainless steel Posts having 100mm dia tube,erected with chemical grout to be fixed on the top of slab/skirting (Spigot Fixed) at corners complete, as manufactured by Dline or approved equivalent & shall be fixed above the finished level complete as per architectural drawings. |
| 49 | Providing and fixing of following size of PVC (Prince make) Fitting ISI Marked |
| 50 | 100mm dia Door Tee |
| 51 | 100mm dia Plain Bend |
| 52 | 100mm dia Collar. |
| 53 | 100mm dia P-Trap |
| 54 | 100mm Door Bend |
| 55 | 100mm dia Plain Tee |
| 56 | 100mm PVC Prince Cliff |
| 57 | 75mm dia Door Bend |
| 58 | 75mm dia Door Tee |
| 59 | 75mm dia Plain Bend |
| 60 | 75mm dia Collar. |
| 61 | 75mm dia Floor Trap. |
| 62 | 75mm dia Plain Tee |
| 63 | 75mm PVC Prince Cliff |
| 64 | 75mm dia PVC Cowel Caps |
| 65 | 50mm dia PVC Elbow |
| 66 | 50mm dia PVC Tee |
| 67 | Providing and fixing of following size of PVC (Prince make) Pipe including C/O (B-Type, specified adhesive. |
| 68 | a) 100mm dia Pipes PVC Prince. |
| 69 | b) 75mm dia Pipes PVC Prince. |
| 70 | c) 50mm dia Pipes PVC Prince. |
| 71 | Providing, laying and fixing heavy duty Glass Fibre reinforced PPR (Polypropylene Random- Copolymer) pipes & Fittings of approved quality with solvent weld socket joints and necessary (female Elbow fittings brass thread) such as sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps, Transition Bushing, unions etc. including necessary excavation, backfilling, fixing with clamps, drilling holes in walls, slabs & making the surface good with hydraulic testingcomplete job. |
| 72 | 20mm dia |
| 73 | 25mm dia |
| 74 | Supply, installation, testing and commissioning of gunmetal, male or female threaded isolation control valve (Ball Valve),of approved quality confirming to IS 778, PN 10, with necessary specials, unions, nipple etc., to complete the job. |
| 75 | 20mm dia |
| 76 | 25mm dia |
| 77 | Providing & Fixing first quality white vitreous china pedestal type water closet (European type)of approved qualitywith seat and lid, CPhings and rubber buffers C.I./M.S brackets, including connection 1.20 mtr ,40 mm dia flush bend with fittings and clamps, overflow arrangements with special and mosquito proof coupling of approved muncipal design including painted of fittings and brackets ,cutting and making good the wall and floors wherever required. |
| 78 | Providing and fixing of 32mm dia C.P long bend for WCs. |
| 79 | Providing and fixing CP 2 in 1 Bib Cockheavy (Standard make) |
| 80 | Providing and fixing low level PVC flushing cistern (8 to 10) liters capacity. |
| 81 | Providing and fixing of vitreouswash basin withMS brackets complete of standard make. |
| 82 | Providing and fixing of vitreousPedastalcomplete of standard make. |
| 83 | Providing and fixing CP short body Bib Cock heavy (Standard make) |
| 84 | Providing and fixing CP long body Bib Cock heavy (Standard make) |
| 85 | Providing and fixing CP Angle valve (Standard make) |
| 86 | Providing & Fixing C.P. Single hole Mixer of approved qualityforwash basin of approved make including cutting and making good the walls wherever required. |
| 87 | Providing and fixing CP waste Coupling |
| 88 | Providing and fixing PVC Waste pipe |
| 89 | Providing and fixing CP Soap case. |
| 90 | Providing and fixing of CP Grating with Anti Cockroach trap below the grating hinge type. |
| 91 | Providing and fixing 15mm dia 2\"- 3\" long CP nipples. |
| 92 | Providing and fixing PVC connection pipe upto 24\" long. |
| 93 | Providing and fixing CP Towel Rod |
| 94 | Providing and fixing CP Towel Ring |
| 95 | Providing and fixing looking Mirror (Belgium Type) |
| 96 | Providing and fixing in position PVC water tanks with lockable cover incl. cost of carriage upto site of work. |
| 97 | Providing , installation, commissioning and testing Hot water Geyser of approved make (Venus, Racold, Jaguar or equivalent)including fixing with bolts and making necessary connections. |
| 98 | 35 Ltrs Capacity |
| 99 | Construction of Brick masonry manholes using 2nd class bricks in 1:6 mix including plastering /CI frame with cover, Complete Job of following sizes. |
| 100 | a) 12\" x 12\" |
| 101 | b)18\" x 18\" |
| 102 | PVC Conduits |
AI Tender Summary
Tender Timeline
Jan 13, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 15, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jan 22, 2024
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 22, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 23, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender