Public Administrative Department Local Bodies Closing in 0 days TDR #41355971

Tender For Tarring Of Road From Oxygen Park To 18 Mtr D P Road At Ward No 20 Kasarwadi Road In Barshi.

Issued by Local Bodies · barshi, Maharashtra
Tender Value
9.62 Crore
Estimated cost
Bid Submission
12 Jan 2024
0 days left
EMD
4.81 Lakhs
Bank guarantee accepted
Document Fee
3360
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
barshi → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tarring Of Road From Oxygen Park To 18 Mtr D P Road At Ward No 20 Kasarwadi Road In Barshi.

BOQ

Name of Work:?????? ???. ?? ?????? ??????? ????????? ???, ??????? ????? ?? ?? ??. D P Road ???????? ????? (D P Road) ????????? ???? .
Sl. No. Item Description
1Excavation for roadway in earth soil of all sorts, sand, gravel or soft murum including dressing section to the required grade camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 mand spreading for embankment or stacking as directed.S.S.R.2022-23Item No.2.11R.A.No.1
2Providing earth work in embankment with approved materials obtained from other sources upto lead of 50 metre including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97% of standard proctor density etc. complete (Material obtained from Other sources).S.S.R.2022-23Item No.2.28R.A.No.2
3Conveying and disposing the materials obtained from road cutting including aii lifts, from the site of excavation to the site of deposition as directed by engineer-in-charge.S.S.R.2022-23Item No.21.02R.A.No.3
4Construction of granular sub-base byPlant Mix Method by providing close graded Material,mixing in a mechanical mix plant at OMC,carriage of mixed Material to work site,spreading in uniform layers with Motor Grader/ Paver on prepared surface and compacting with vibratory power roller to achieve the desired density complete as per clause 401.For Grading I Material.S.S.R.2022-23Item No.3.01R.A.No.4
5Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base /base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver.S.S.R.2022-23Item No.3.23R.A.No.5
6Providing and applying primer coat with bitumen emulsion on prepared surface of Granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/Square Metre using mechanical means.S.S.R.2022-23Item No.3.29R.A.No.6
7Providing and applying tack coat on the prepared surface heating by flames in boiler and spraying bitumenset footed in bitumen boiler on B.T. surface at 2.50 Kg per 10 Square Metre using VG-30 grade bulk bitumen.S.S.R.2022-23Item No.3.30R.A.No.7
8Proving and laying bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder, transported to site with Vehicle Tracking System, laid over a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired compaction for 80/100 mm compacted thickness with 3.3% VG-30 Bitumen usingBatch mix type hot mix plant with SCADA, Sensor Paver, vibratory roller.S.S.R.2022-23Item No.R.A.No.8
9Providing and laying Bituminious Concrete using crushed aggregate of grading 1,premixed with bituminious binder of dose 5.40 percent by weight of total mix and filler, transported at site with VTS, laidover a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired density for 50 mm compacted thickness withDrum Mixtype hot mix plant with SCADA, Sensor Paver and Vibratory Roller excluding prime/Tack coat etc. complete with Bitumen VG-30 gradewith stone dust filler.S.S.R.2022-23Item No.3.50R.A.No.9
10Supplying hard murum at the road site including conveying and stacking complete.S.S.R.2022-23Item No.2.29aR.A.No.10
11Spreading hardmurum/ soft murum/ gravel or kankar for side width complete.S.S.R.2022-23Item No.2.30R.A.No.11
12Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering complete.S.S.R.2022-23Item No.2.31R.A.No.12
13Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade).S.S.R.2022-23Item No.24.01R.A.No.13
14Providing and laying in situ/ Ready Mixcement concrete M-20of trap/ granite/quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/ pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided, (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). S.S.R.2022-23Item No.25.11R.A.No.14
15Providing and laying Cast in situ/ Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade).S.S.R.2022-23Item No.26.17R.A.No.15
16Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Slabs and Landingsas per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mixplant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). S.S.R.2022-23Item No.25.70R.A.No.16
17Providing and fixing in position TMT FE -500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.S.S.R.2022-23Item No.26.33R.A.No.17
18Providing and applying two coats (exterior quality)of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surface and preparing surface etc. complete. (excluding primer coat). S.S.R.2022-23Item No.35.11R.A.No.18
19Providing and laying cement concrete pipe of I.S. 458:2003 non pressure-2 classof 450 milimetrediameterin proper line, level and slope including providingandfixing collars in cement mortar 1:2 complete. S.S.R.2022-23Item No.11.08R.A.No.19
20Providing and laying Cast in situ/ Ready Mix cement concrete in M-15 of trap/ granite/ quartzite/ gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/ steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade).S.S.R.2022-23Item No.24.08R.A.No.20
21Providing and fixing heavy duty inter locking concrete Gray paving blocks of 60 mm. thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm. thick including skirting joints and cleaningetc. complete.S.S.R.2022-23Item No.33.49R.A.No.21
22Providing and laying of hot applied thermoplastic compound 2.50 milimetre thick including reflectorizing glass beads at 250 grams per square metre area, thickness of 2.50 milimetre is exclusive of surface applied glass beads as per Indian Road Congress:35. The finished surface to be level, uniform and free from streaks and holes complete.S.S.R.2022-23Item No.6.12aR.A.No.22
23Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter (as per IRC:86-1983) embedded 125 mm below ground level over M-10 P.C.C. finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff anywhere in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant.S.S.R.2022-23Item No.7.01R.A.No.23
24Providing and fixing Mandatory/Regulatory sign boards in circular shape of 600 mm diamade out of 1.5mm aluminum sheet bonded with white retro reflective sheeting ofClass B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. ofM. S. angle iron post of size65 mm X 65 mm X 6 mm, 3.45 m long,duly paintedwithwith flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warrantyfrom the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificatein original should be submitted to the Engineer in charge by the contractor/supplier.S.S.R.2022-23Item No.6.27aR.A.No.24
25Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 600 mmmade out of 1.5mm aluminum sheet bonded with white retro reflective sheeting ofClass B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. ofM. S. angle iron post of size65 mm X 65 mm X 6 mm, 3.45 m long,duly paintedwithwith flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warrantyfrom the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificatein original should be submitted to the Engineer in charge by the contractor/supplier.S.S.R.2022-23Item No.6.29aR.A.No.25
26Providing and fixing Cautionary/Warning sign boards in Octagone size of 750 mmmade out of 2mm aluminum sheet bonded with white retro reflective sheeting ofClass B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint andsupported on one no. ofM. S. angle iron post of size65 mm X 65 mm X 6 mm, 3.45 m long,duly paintedwithwith flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warrantyfrom the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificatein original should be submitted to the Engineer in charge by the contractor/supplier.S.S.R.2022-23Item No.6.31aR.A.No.26
27Providing and fixing of retro-reflectorised informatory sign board Rectangular/ Squarein shape having area less than 0.9 square metremade out of 2 mm. aluminum sheet bonded with white retro reflective sheeting bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/ heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012, Table No 8.3, supportedwith back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one number of M.S. angle iron post of size75 mm. X 75 mm. X 6 mm., 3.5 m. long, firmly fixed to the ground by means of properly designed foundation with M-25 grade cement concrete 45 cm. x 45 cm. x 60 cm., 60 cm. below ground level as per approved drawing The angle iron postshall be duly painted with one coat of epoxy primer and two coats of epoxy finish paint having alternate black and white bands of 25 cm. width including G.I. fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warrantyfrom the manufacturer and authorised distributor/ convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificatein original should be submitted to the Engineer in charge by the contractor/ supplier.S.S.R.2022-23Item No.6.33aR.A.No.27

AI Tender Summary

OUR REF NO 41355971
AUTHORITY Local Bodies
TENDER VALUE 9.62 Crore
LAST DATE 12-01-2024
Authority
Authority Name Directorate Of Municipal Administration
Work Description Tarring Of Road From Oxygen Park To 18 Mtr D P Road At Ward No 20 Kasarwadi Road In Barshi.
Basic Detail
Tender No 202324_BNP_CED_Notice_23_1
Bidding Type Tender
Location
City barshi
State Maharashtra
Key Dates
Publish Date 28 Dec 2023
Submission Date 12 Jan 2024
Open Date 15 Jan 2024
Finance
Tender Value 9.62 Crore
Tender Fee 3360
EMD 4.81 Lakhs
Exemption Not Available
Document List
988df94e-579b-4883-9c9e-c2344930e352.html
AffidavitAndParishishtaA.pdf
AllTC.pdf
B1_1.pdf
BOQ_1704738.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Dec 28, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 12, 2024
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 15, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

988df94e-579b-4883-9c9e-c2344930e352.html

pdf

AffidavitAndParishishtaA.pdf

pdf

AllTC.pdf

pdf

B1_1.pdf

xls

BOQ_1704738.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender