Tender For Civil Repair Works In T.E. Compound Sector 71, Noida., noida-Uttar Pradesh

Tender For Civil Repair Works In T.E. Compound Sector 71, Noida. ; 1 Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge. ( A ) Nominal Concrete 1:3:6 Or Richer Mix ( I / C Equivalent Design Mix ) 2 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.. ( A ) In Cement Mortar 3 Removing Mortar From Bricks And Cleaning Bricks Including Stacking Within A Lead Of 50 M ( Stacks Of Cleaned Bricks Shall Be Measured ) : ( A ) From Brick Work In Cement Mortar 4 Dismantling Cement Asbestos Or Other Hard Board Ceiling Or Partition Walls Including Stacking Of Serviceable Materials And Disposal Of Unserviceable Materials Within 50 Metres Lead. 5 Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. 6 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. ( A ) All Kinds Of Soil. 7 Filling Available Excavated Earth ( Excluding Rock ) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Up To 1.5 M. 8 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : ( A ) 1:2:4 ( 1 Cement : 2 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) 9 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : ( B ) 1:5:10 ( 1 Cement : 5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 10 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources ) 10 Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls ( Any Thickness ) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Sunken Floor, Etc., Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering And Finishing : ( A ) 1:1½:3 ( 1 Cement : 1½ Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) . 11 Providing And Laying Damp-Proof Course 40Mm Thick With Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand ( Zone Iii ) Derived From Natural Sources : 4 Graded Stone Aggregate 12.5Mm Nominal Size Derived From Natural Sources ) . 12 Providing And Applying A Coat Of Residual Petroleum Bitumen Of Grade Of Vg-10 Of Approved Quality Using 1.7Kg Per Square Metre On Damp Proof Course After Cleaning The Surface With Brushes And Finally With Apiece Of Cloth Lightly Soaked In Kerosene Oil. 13 Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 ( 1 Cement : 3 Coarse Sand Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) Over 75Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation Leveling And Dressing And Finishing The Top Smooth. 14 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Sizederived From Natural Sources ) . 15 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : ( A ) Suspended Floors, Roofs, Landings, Balconies And Access Platform 16 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : ( B ) Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 17 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. ( A ) Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 18 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth In: ( A ) Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 19 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : ( A ) Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 20 Half Brick Masonry With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. ( A ) Cement Mortar 1:3 ( 1 Cement :3 Coarse Sand ) 21 Brick Edging 7Cm Wide 11.4 Cm Deep To Plinth Protection With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 Including Grouting With Cement Mortar 1:4 ( 1 Cement : 4 Fine Sand ) . 22 Providing And Fixing Red Sand Stone Slab 40 Mm Thick In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) As Partition Wall In Septic Tank All Complete As Per The Direction Of Engineer-In-Charge. 23 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. ( A ) Fixed To Steel Windows By Welding. 24 Providing And Fixing Oxidised M.S. Casement Stays ( Straight Peg Type ) With Necessary Screws Etc. Complete. ( A ) 300 Mm Weighing Not Less Than 200 Gms. 25 Providing And Fixing 100 Mm Size M.S. Handles For Side Hung Steel Windows Including Nuts And Screws All Complete As Per The Direction Of Engineer-In-Charge 26 Structural Steel Work In Single Section, Fixed With Or Without Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete 27 Providing And Fixing 1Mm Thick M.S. Sheet Door With Frame Of 40X40x6 Mm Angle Iron And 3 Mm M.S. Gusset Plates At The Junctions And Corners, All Necessary Fittings Complete, Including Applying A Priming Coat Of Approved Steel Primer. ( A ) Using M.S. Angels 40X40x6 Mm For Diagonal Braces 28 Providing And Fixing Factory Made Isi Marked Steel Glazed Doors, Windows And Ventilators, Side / Top / Centre Hung, With Beading And All Members Such As F7d, F4b, K11 B And K12 B Etc. Complete Of Standard Rolled Steel Sections, Joints Mitred And Flash Butt Welded And Sash Bars Tenoned And Riveted, Including Providing And Fixing Of Hinges, Pivots, Including Priming Coat Of Approved Steel Primer, But Excluding The Cost Of Other Fittings, Complete All As Per Approved Design, ( Sectional Weight Of Only Steel Members Shall Be Measured For Payment ) . ( A ) Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10x10 Cm Of C.C. 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) 29 Providing And Fixing T-Iron Frames For Doors, Windows And Ventilators Of Mild Steel Tee-Sections, Joints Mitred And Welded, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. ( A ) Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10x10 Cm Of C.C. 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) . 30 Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. ( A ) In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works. 31 Providing & Fixing Glass Panes With Putty And Glazing Clips In Steel Doors, Windows, Clerestory Windows All Complete With : ( A ) 4.0 Mm Thick Glass Panes. 32 Cement Concrete Flooring 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. ( A ) 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate 33 Cement Plaster Skirting Up To 30 Cm Height, With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) , Finished With A Floating Coat Of Neat Cement. ( A ) 18 Mm Thick. 34 Providing And Fixing Glass Strips In Joints Of Terrazzo / Cement Concrete Floors. ( A ) 40 Mm Wide And 4 Mm Thick. 35 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm ( Thickness To Be Specified By The Manufacturer ) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement :4 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3Kg / Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., ., Complete. 36 Providing And Fixing 1St Quality Ceramic Glazed Floor Tiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacturer ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1Cement: 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kgper Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 37 Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings / Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A Including Jointing With Seal Ring Conforming To Is :5382 Leaving 10 Mm Gap For Thermal Expansion. ( A ) Single Tee Without Door ( I ) 110X110x110 Mm 38 Providing Corrugated Asbestos Cement Sheet 6 Mm Thick Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead ( Up To Any Pitch In Horizontal / Vertical Or Curved Surfaces ) , Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required As Per The Direction Of Engineer-In-Charge. 39 12 Mm Cement Plaster Of Mix : ( A ) 1:6 ( 1 Cement: 6 Coarse Sand ) 40 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix : ( A ) 1:6 ( 1 Cement: 6 Coarse Sand ) 41 Neat Cement Punning 42 Finishing Walls With Water Proofing Cement Paint Of Required Shade : ( A ) New Work ( Two Or More Coats Applied @ 3.84 Kg / 10 Sqm ) . 43 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : ( A ) Two Or More Coats On New Work. 44 Repairs To Plaster Of Thickness 12 Mm To 20 Mm In Patches Of Area 2.5 Sq. Meters And Under, Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete, Including Disposal Of Rubbish To The Dumping Ground , All Complete As Per Directions Of Engineer-In-Charge. ( A ) With Cement Mortar 1:4 ( 1Cement: 4 Coarse Sand ) . 45 Renewing Glass Panes, With Putty And Nails Wherever Necessary Including Racking Out The Old Putty: ( A ) Float Glass Panes Of Nominal Thickness 4 Mm ( Weight Not Less Than 10Kg / Sqm ) . 46 Providing And Fixing Water Closet Squatting Pan ( Indian Type W.C.Pan ) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: ( A ) White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests 47 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: ( A ) White Vitreous China Flat Back Wash Basin Size 550X 400 Mm With Single 15 Mm C.P. Brass Pillar Tap 48 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. ( A ) Flexible Pipe ( I ) 32 Mm Dia 49 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass ( Of Approved Quality ) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 50 Providing And Fixing Pvc Trap Of Self Cleansing Design With Top Tile And Strainer Complete, Including Cost Of Cutting And Making Good The Walls And Floors : ( A ) 100 Mm Inlet And 100 Mm Outlet 51 Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings / Accessories For Unplasticised Rigid Pvc Swr Grade Soil, Waste, Vent Conforming Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion.To Is : 13592 ( A ) Bend 87.5° With Door ( I ) 110 Mm 52 Credit For Recovery Of Old Serviceable Bricks Recovered After Dismantling: ( A ) F.P.S Bricks. 53 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. : Internal Work - Exposed On Wall ( A ) 25 Mm Nominal Outer Dia .Pipes. 54 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. : Internal Work - Exposed On Wall ( B ) 40 Mm Nominal Outer Dia. Pipes. 55 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I / C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. :Concealed Work, Including Cutting Chases And Making Good The Walls Etc. ( A ) 20 Mm Nominal Outer Dia .Pipes. 56 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge : External Work ( A ) 40 Mm Nominal Outer Dia. Pipes. 57 Providing And Fixing Cpvc Ball Valve Of Approved Make For Cpvc Pipe Lines. ( A ) 25Mm Size 58 Providing And Fixing Cpvc Ball Valve Of Approved Make For Cpvc Pipe Lines. ( B ) 40 Mm Dia 59 Providing And Fixing Cpvc Unions For Cpvc Pipe Line Including Cutting And Fixing. ( A ) For 25Mm Dia Pipe Line 60 Providing And Fixing Cpvc Unions For Cpvc Pipe Line Including Cutting And Fixing. ( B ) 40 Mm Dia 61 Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank, Is : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. 62 Providing And Fixing Ptmt Bib Cock Of Approved Quality And Colour. ( A ) 15Mm Nominal Bore, 86 Mm Long. Weighing Not Less Than 88 Gms. 63 Providing And Fixing Ptmt Grating Of Approved Quality And Colour. ( A ) Circular Type. ( I ) 100 Mm Nominal Dia. 64 Providing And Fixing Ptmt Ball Cock Of Approved Quality, Colour And Make Complete With Epoxy Coated Aluminium Rod With L.P. / H.P.H.D. Plastic Ball. ( A ) 25 Mm Nominal Bore, 152 Mm Long. Weighing Not Less Than 440 Gms. 65 Providing And Fixing Unplasticised P.V.C. Connection Pipe With Ptmt Nuts, Collar And Bush Of Approved Quality And Colour. ( A ) 15 Mm Nominal Bore With 45 Cm Length. 66 Providing And Fixing Ptmt Extension Nipple For Water Tank Pipe, Fittings Of Approved Quality And Colour. ( A ) 25Mm Nominal Bore. 67 Providing And Fixing Ptmt Extension Nipple For Water Tank Pipe, Fittings Of Approved Quality And Colour. ( B ) 40 Mm Nominal Bore. 68 Making Hole Up To 20X20 Cm And Embedding Pipes Up To 150 Mm Diameter In Masonry And Filling With Cement Concrete 1:3:6 ( 1 Cement: 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) Including Disposal Of Malba. 69 Constructing Brick Masonry Manhole In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) With R.C.C. Top Slab With 1:1.5:3 Mix ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) : 3 Graded Stone Aggregate 20 Mm Nominal Size ) , Foundation Concrete 1:4:8 Mix ( 1 Cement : 4 Coarse Sand ( Zone-Iii ) : 8 Graded Stone Aggregate 40 Mm Nominal Size ) , Inside Plastering 12 Mm Thick With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) Finished With Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : ( I ) With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 70 Providing And Fixing In Position Pre-Cast R.C.C. Manhole Cover And Frame Of Required Shape And Approved Quality ( A ) L D - 2.5 ( I ) Rectangular Shape 600X450 Mm Internal Dimensions 71 Providing, Laying & Jointing Rigid Pvc Pipe Of Approved Quality Of Pressure 2.50 Kg / Sqcm With One End Plain And Other End Socketed Including Jointing With Couplings Wherever Necessary Pvc Cement Solvent Testing Of Joints Etc Complete. ( A ) 110 Mm Dia 72 Providing And Fixing M.S. Clamp Of Required Dia To The Top Of Casing / Housing Pipe Of Tubewell As Per Is: 2800 ( Part I ) , Including Necessary Bolts & Nuts Of Required Size Complete. ( A ) 100 Mm Clamp 73 Construction Of Cc Plateform Of Size 0.60 M X 0.60 M X 0.15 M For Bore Well Including Centring, Shuttering, Plastering And Neat Cement Punning, Curing Etc. All Complete As Per Direction Of Engineer In Charge. 74 To And Fro Transportation Charges Of Equipments And T & P To Be Required For Boring, Lowering The Pipe And Development Etc. Upto Site Including Cost Of Installing, Dismantling, Loading Unloading Of Equipments Etc. All Completein Single Of Multiple Attempts As Per Requirment Of Works And As Per The Direction Of Engineer-In-Charge. 75 Boring With 160 Mm Outer Diameter Casing Pipe For Hand Pump / Tubewell In All Soils Except Hard Rock Requiring Blasting, Including Removing The Casing Pipe After The Hand Pump / Tube Well Is Lowered And Tested ( Upto The Depth Of 90 Metres ) As Per Direction Of Engineer-In-Charge. 76 Supplying And Lowering Pvc Pipe ( Heavy Duty With Working Pressure 6 Kgf / Sqm ) For Hand Pump / Tume Well Including The Cost Of Pvc Pipe Socket Includung Cutting And Jointing With Pvc Solvent, Pvc End Cap Etc. All Complete As Per The Direction Of Engineer-In-Charge. ( A ) 110 Mm Pvc Pipes 77 Supplying And Lowering Pvc Pipe ( Heavy Duty With Working Pressure 6 Kgf / Sqm ) For Hand Pump / Tume Well Including The Cost Of Pvc Pipe Socket Includung Cutting And Jointing With Pvc Solvent, Pvc End Cap Etc. All Complete As Per The Direction Of Engineer-In-Charge. ( B ) 110 Mm Slotted Pvc Pipes Wrapped With Pvc Strainer Cloth And Thread Of Approved Quality

INR 590 /-

INR 10798.0 /-

INR 5.39 Lakhs /-

Name of Work: Civil Repair works in T.E. Compound Sector 71, Noida.

Sl. No.	Item Description
1	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.(a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
2	Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge..(a) In cement mortar
3	Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured):(a) From brick work in cement mortar
4	Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.
5	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
6	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.(a) All kinds of soil.
7	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
8	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(a) 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
9	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(b) 1:5:10 (1 cement : 5 coarse sand(zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
10	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :(a) 1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
11	Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (Zone III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources).
12	Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
13	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling and dressing and finishing the top smooth.
14	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources).
15	Centering and shuttering including strutting, propping etc. and removal of form for :(a) Suspended floors, roofs, landings, balconies and access platform
16	Centering and shuttering including strutting, propping etc. and removal of form for :(b) Lintels, beams, plinth beams, girders, bressumers and cantilevers
17	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.(a) Thermo-Mechanically Treated bars of grade Fe-500D or more.
18	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:(a) Cement mortar 1:6 (1 cement : 6 coarse sand)
19	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :(a) Cement mortar 1:6 (1 cement : 6 coarse sand)
20	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.(a) Cement mortar 1:3 (1 cement :3 coarse sand)
21	Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
22	Providing and fixing red sand stone slab 40 mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) as partition wall in septic tank all complete as per the direction of Engineer-in-Charge.
23	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.(a) Fixed to steel windows by welding.
24	Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.(a) 300 mm weighing not less than 200 gms.
25	Providing and fixing 100 mm size M.S. handles for side hung steel windows including nuts and screws all complete as per the direction of Engineer-in-Charge
26	Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
27	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.(a) Using M.S. angels 40x40x6 mm for diagonal braces
28	Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).(a) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
29	Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.(a) Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
30	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.(a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
31	Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with :(a) 4.0 mm thick glass panes.
32	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.(a) 40 mm thick with 20 mm nominal size stone aggregate
33	Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.(a) 18 mm thick.
34	Providing and fixing glass strips in joints of terrazzo/ cement concrete floors.(a) 40 mm wide and 4 mm thick.
35	Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete.
36	Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing in white cement mixed with pigment of matching shade complete.
37	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.(a) Single tee without door(i) 110x110x110 mm
38	Providing corrugated Asbestos Cement Sheet 6 mm thick roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer-in-Charge.
39	12 mm cement plaster of mix :(a) 1:6 (1 cement: 6 coarse sand)
40	15 mm cement plaster on rough side of single or half brick wall of mix :(a) 1:6 (1 cement: 6 coarse sand)
41	Neat cement punning
42	Finishing walls with water proofing cement paint of required shade :(a) New work (Two or more coats applied @ 3.84 kg/10 sqm).
43	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :(a) Two or more coats on new work.
44	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.(a) With cement mortar 1:4 (1cement: 4 coarse sand).
45	Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:(a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).
46	Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:(a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
47	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:(a) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
48	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(a) Flexible pipe(i) 32 mm dia
49	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
50	Providing and fixing PVC trap of self cleansing design with top tile and strainer complete, including cost of cutting and making good the walls and floors :(a) 100 mm inlet and 100 mm outlet
51	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC SWR grade Soil, waste, vent conforming Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.to IS : 13592(a) Bend 87.5° with door(i) 110 mm
52	Credit for recovery of old serviceable bricks recovered after dismantling:(a) F.P.S Bricks.
53	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall(a) 25 mm nominal outer dia .Pipes.
54	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall(b) 40 mm nominal outer dia. Pipes.
55	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc.(a) 20 mm nominal outer dia .Pipes.
56	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work(a) 40 mm nominal outer dia. Pipes.
57	Providing and fixing CPVC ball valve of approved make for CPVC pipe lines.(a) 25mm size
58	Providing and fixing CPVC ball valve of approved make for CPVC pipe lines.(b) 40 mm dia
59	Providing and fixing CPVC unions for CPVC pipe line including cutting and fixing.(a) for 25mm dia pipe line
60	Providing and fixing CPVC unions for CPVC pipe line including cutting and fixing.(b) 40 mm dia
61	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
62	Providing and fixing PTMT bib cock of approved quality and colour.(a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms.
63	Providing and fixing PTMT grating of approved quality and colour.(a) Circular type.(i) 100 mm nominal dia.
64	Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.(a) 25 mm nominal bore, 152 mm long. Weighing not less than 440 gms.
65	Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.(a) 15 mm nominal bore with 45 cm length.
66	Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.(a) 25mm nominal bore.
67	Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.(b) 40 mm nominal bore.
68	Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)including disposal of malba.
69	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :(i) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
70	Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality(a) L D - 2.5(i) Rectangular shape 600x450 mm internal dimensions
71	Providing, laying & jointing rigid PVC pipe of approved quality of pressure 2.50 Kg/Sqcm with one end plain and other end socketed including jointing with couplings wherever necessary PVC cement solvent testing of joints etc complete.(a) 110 mm dia
72	Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.(a) 100 mm clamp
73	Construction of CC plateform of size 0.60 m x 0.60 m x 0.15 m for bore well including centring, shuttering, plastering and neat cement punning, curing etc. all complete as per direction of Engineer in charge.
74	To and fro transportation charges of equipments and T & P to be required for boring, lowering the pipe and development etc. upto site including cost of installing, dismantling, loading unloading of equipments etc. all completein single of multiple attempts as per requirment of works and as per the direction of Engineer-in-Charge.
75	Boring with 160 mm outer diameter casing pipe for hand pump/tubewell in all soils except hard rock requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested (upto the depth of 90 Metres) as per direction of Engineer-in-Charge.
76	Supplying and lowering PVC Pipe (heavy duty with working pressure 6 kgf/sqm) for hand pump / tume well including the cost of PVC pipe socket includung cutting and jointing with PVC solvent, PVC end cap etc. all complete as per the direction of Engineer-in-Charge.(a) 110 mm PVC pipes
77	Supplying and lowering PVC Pipe (heavy duty with working pressure 6 kgf/sqm) for hand pump / tume well including the cost of PVC pipe socket includung cutting and jointing with PVC solvent, PVC end cap etc. all complete as per the direction of Engineer-in-Charge.(b) 110 mm slotted PVC pipes wrapped with PVC strainer cloth and thread of approved quality