Military Engineer Services-MES has published Tender For Repair/ Maintenance And Overhauling Of Dg Sets, Amf Panels At Various Locations, Servicing Of Solar Water Heaters And Repair/Renewal Of Sewage Treatment Plant, Testing, Cleaning And Maintenance Under Age E/M No 1 Of Ge (Utility) Secundera. Submission Date for this Tender is 22-01-2024. Diesel Generators Tenders in secunderabad Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-01-2024 |
| Sl. No. | Item Description |
| 1 | M&L for Maintenance of DG set and carrying out ‘B’ check and replacement of ‘B’ check kit filters such as Oil filter, by pass filter, fuel filter, CR element and CR plates complete with ‘O’ rings and draining of Engine oil and topping up with the new engine oil complete testing all as specified and directed by the Engr-in-Charge for the following capacity DG sets:- Note :-(i) Engine oil shall be measured and paid separately. (ii) Labour & transportation shall be arranged by contractor, quoted rate deemed to be inclusive in the unit rate. Make: KIRLOSKER/ CUMMINS /GREAVES/ GREAVES COTTON/ASIATIC/ RUSTON (a)Up to 18 KVA DG Set |
| 2 | All as per item No 1 above but above 18 KVA and up to 30kVA DG Set |
| 3 | All as per item No 1 above but above 40 KVA and up to 63 KVADG Set |
| 4 | All as per item No 1 here-in-before but 200 KVA to 250 KVA DG Set |
| 5 | M&L for Renewal/Replacement of unserviceable batteries with maintenance free batteries of 150 AH, 12V including connecting to DG set complete all as directed by Engr-in-charge. Make:-EXIDE/ AMARON |
| 6 | M&L for Renewal/Replacement of unserviceable batteries with maintenance free batteries of 180 AH, 12V including connecting to DG set complete all as directed by Engr-in-charge. Make:-EXIDE/ AMARON |
| 7 | Attending thebreakdown of any capacity/make DG Sets, AMF Panels, by Technician & helper for checking all components and rectifythe fault and give report to concern JE complete all as directed by Engr-in-charge. Note :- Spare Parts for rectify the fault is measured and paid separately. |
| 8 | M&L for Renewal/ repairs of unserviceable automatic voltage regulator (AVR) up to 50 KVA DG set including all spares, testing all as specified and directed by Engr-in-Charge. Make:- As per OEM approved make. |
| 9 | M&L for Renewal/ repairs of unserviceable automatic voltage regulator (AVR) above 200KVA and up to 250 KVA DG set including all spares, testing all as specified and directed by Engr-in-Charge. Make:- As per OEM approved make. |
| 10 | M&L for Dismantling of exhaust pipe of the DG set by unscrewing nuts and bolts and taking down the pipe with muffler removing the burnt out asbestos rope and well wrapping with new aluminium metal cladding with glass wool including cleaning the silencer, and fixing the same in its original position complete all as directed by Engr- in- Charge for the following capacity DG Sets. up to50KVA |
| 11 | All as per item No 7 above but 200 KVA to 250 KVA DG set. |
| 12 | M&L for Disconnecting all electrical connections from the unserviceable self starter of any make/ capacity model 24 volts and taking down the self starter and transporting to civil workshop for carrying out repairs, complete overhauling the system including replacing the unserviceable parts like bearings, carbon brushes, clutch plates etc & assemblingincluding after repair refixing the self starter in its original position, making all connection as per DG Set OEM recommendation, testing and commissioning complete all as directed by Engr-in-charge. Note:- Supply only Armature coil, field coil shall be measured and paid separately under relevant items of this Schedule. |
| 13 | Supply only Armature coil for self starter of any make, any capacity and any model 24 Volts including testing complete all as directed by Engr-in-charge |
| 14 | rewinding of field coil for self starter of 24 volts with fine enameled copper conductor of same gauge with "F" class insulation, size twins and weight with necessary insulating materials, gauge of conductor suitable of any make, any capacity and any modelcomplete all as directed by Engr-in-charge. |
| 15 | M&L for Disconnecting all electrical connections from the unserviceable self starter of any make/ capacity model 12 volts and taking down the self starter and transporting to civil workshop for carrying out repairs, complete overhauling the system including replacing the unserviceable parts like bearings, carbon brushes, clutch plates etc & assemblingincluding after repair refixing the self starter in its original position, making all connection as per DG Set OEM recommendation, testing and commissioning complete all as directed by Engr-in-charge. Note:- Supply only Armature coil, field coil shall be measured and paid separately under relevant items of this Schedule. |
| 16 | Supply only Armature coil for self starter of any make, any capacity and any model 12 Volts, 180/200 AH complete all as directed by Engr-in-charge |
| 17 | Rewinding of field coil for self starter of 12 volts with fine enameled copper conductor of same gauge with "F" class insulation, size twins and weight with necessary insulating materials, gauge of conductor suitable of any make, any capacity and any modelcomplete all as directed by Engr-in-charge. |
| 18 | M&L for Disconnecting the oil cooler of capacity up to 50 KVA DG set of any make/ model from the existing locations duly removing of all mechanical connections and taking down the same for complete servicing opening the parts and cleaning thoroughly by using suitable cleaning material and acid and reassembling and refixing in its original position, testing and commissioning complete all as directed by Engr-in-charge |
| 19 | M&L for Disconnecting the oil cooler of capacity above 200kVA to 250KVA DG set of any make/ model from the existing locations duly removing of all mechanical connections and taking down the same for complete servicing opening the parts and cleaning thoroughly by using suitable cleaning material and acid and reassembling and refixing in its original position, testing and commissioning complete all as directed by Engr-in-charge |
| 20 | M&L for Renewal/ replacement of existing unserviceable air cleaning element inner and outer with necessary ‘O’ rings for the DG sets of following capacities as that of existing make and model complete all as directed by Engr-in-charge: - Make for item No.10 to 10.02:OEM recommended Up to 50 KVA DG Set |
| 21 | All as per item No 12 above but above 200 KVA and up to 250 KVADG Set |
| 22 | M&L for Disconnecting all the incoming and outgoing rubber hoses and draining out the water from the choked radiator assembly of the existing make and model and various capacities of DG sets and taking down the radiator assembly by unscrewing all mechanical/electrical connections from the existing mounting, transporting the same to civil workshop for carrying out servicing, opening the top and bottom covers ofradiator assembly cleaning thoroughly the chocked pipe of the radiator by using chemical detergent, lime caustic soda, cotton etc., cleaning of all the deposited sediments in the pipes/tubes including arresting of leakage by means of soldering, brazing and transporting back to site and refixing the same in its original position with suitable size nuts, bolts and washers and Anti vibrating mounting(AVM) pads as required as per OEM recommendation etc., for the following DG sets all as specified and directed by Engr-in-Charge: Up to 50 KVA DG Set |
| 23 | All as per item No 13 above but above 200 KVA and up to 250 KVA DG Set |
| 24 | M&L for Renewal of battery cable leads of copper conductor and with brass lugs terminal, for the 12V, 150/180 /200 AHbatteries to self starter as that of existing size and length complete all as directed by Engr-in-charge |
| 25 | S&F Automatic cut off type Battery Charger suitable for 12 V, up to 10 Amp Battery complete all as directed by Engr-in-charge. Make SMPS/ Phonix |
| 26 | S&F Automatic cut off type Battery Charger suitable for 24 V, up to 10 Amp Battery complete all as directed by Engr-in-charge. Make SMPS/ Phonix |
| 27 | M&L for Renewal/replacement of "V" belts for the following capacity DG sets as perexisting size and model complete all as directed by Engr-in-charge. Make:- FENNER/ DUNLOP Up to 50 KVA DG Set |
| 28 | All as per item No 17 above but above 200 KVA and up to 250 KVA DG Set |
| 29 | M&L for Renewal/replacement of fan belts for the following capacity DG sets as perexisting size and model complete all as directed by Engr-in-charge. Make:- As per OEM Recommendation Up to 50 KVA DG Set |
| 30 | All as per item No 18 above but above 200 KVA and up to 250 KVADG Set |
| 31 | M&L for Renewal/replacement of Dynamo belts for the following capacity DG sets as perexisting size and model complete all as directed by Engr-in-charge. Make:- As per OEM Recommendation Up to 50 KVA DG Set |
| 32 | All as per item No 19 above but above 200 KVA and up to 250 KVADG Set |
| 33 | M&L disconnecting & removing the unserviceable DC wiring from DG set of any type/any make/any model/any capacity and rewiring with the same with suitable new copper wire to existing gauge wire by providing flexible pipe including making all electrical connections as per OEM recommendation for satisfactory completion of job & checking of electrical/electronic spares working condition and testing etc complete all as specified and directed. Note: (i) The rate quoted deemed to be inclusive of new copper wire cost in the unit rate. |
| 34 | M&L for replacement of existing unserviceable water temperature gauge with new water temperature gauge for the DG set of any description including making necessary electrical /mechanical connections and taking down old unserviceable one complete all as directed by Engr-in-charge. Make: OEM recommended make |
| 35 | M&L for replacement of existing unserviceable lubricant oil temperature gauge with new lubricant oil temperature gauge for the DG set of any capacity including making necessary electrical /mechanical connections and taking down old unserviceable one complete all as directed by Engr-in-charge. Make: OEM recommended make |
| 36 | M&L for replacement of existing unserviceable oil pressure gauge with new oil pressure gauge for the DG SET of any capacityincluding making necessary electrical /mechanical connections and taking down old unserviceable one complete all as directed by Engr-in-charge. Make: OEM recommended make |
| 37 | M&L for replacement of unserviceable solenoid switch with new solenoid switch 12voltsfor DG set of any make and any capacityincluding making necessary electrical /mechanical connections and taking down old unserviceable one complete all as directed by Engr-in-charge. Make :-OEM recommended |
| 38 | M&L for replacement of unserviceable solenoid switch with new solenoid switch 24voltsfor DG set of any make and any capacity including making necessary electrical /mechanical connections and taking down old unserviceable one complete all as directed by Engr-in-charge. Make :- OEM recommended |
| 39 | S&F in repairs the following spare parts for any type/make of DG sets, as and when required by the department complete all as specified and directed. Make for item no 23 to 23.10:- OEM recommended |
| 40 | Starting/Ignition - key/button |
| 41 | Volt Meter 0-500V |
| 42 | Amps Meter |
| 43 | Frequency Meter |
| 44 | S.D Valve assembly |
| 45 | Oil safety control |
| 46 | Water safety control |
| 47 | Water separator bowl 3247715 |
| 48 | Hour Meter |
| 49 | Radiator Metal Pipes |
| 50 | Supply and filling the new engine oil 20W/40 for toping up up to the required level complete all as directed by Engr-in-charge |
| 51 | Supply and filling the new engine oil 15W/40 for toping up up to the required level complete all as directed by Engr-in-charge |
| 52 | S&F in replacement of Line Voltage Monitors (LVMS) of existing make to DG set up to 50 KVA capacity listed parameters including testing complete all as specified and as directed. Make :- OEM recommended |
| 53 | S&F in replacement of Line Voltage Monitors (LVMS) of existing make to DG set capacity up 200 to 250 KVA capacity listed parameters including testing complete all as specified and as directed. Make :- OEM recommended |
| 54 | Drain out the fuel from the fuel tank of DG set of capacity 500 Ltrs and above and keeping it in separate container safely, disconnecting all the fuel lines and other mechanical connections and taking out the fuel tank for cleaning, internally and externally by removing all the accumulated dirt/ sediment, leak testing the tank and welding/ brazing including one coat ofsynthetic enamel paint, refixing the tank in its original position, replacing the drain plug and PVC pipe, calibrating the fuel tank, refilling the drained out fuel back into the tank and marking of liters in gauge and provision of locking arrangements complete all as directed by Engr-in-charge. |
| 55 | S&F in replacement of Rectifiers of existing Make to DG Set of Up to 50 KVA capacity with all listed parameters including testing complete all as specified and directed. |
| 56 | S&F in replacement of Rectifiers of existing Make to DG Set capacity up to 100 to 250 KVA capacity with all listed parameters including testing complete all as specified and directed. |
| 57 | M &L for Removing of defective engine oil control pressure switch supply & fix new engine oil control pressure switch suitable for up to 100KVA DG setcomplete all as directed by Engr-in-charge. Make as per OEM Recommendation. |
| 58 | M&L for Removing of defective engine oil control pressure switch supply & fix new engine oil control pressure switch suitable for above 100 KVA to 250 KVA DG set complete all as directed by Engr-in-charge. Make as per OEM Recommendation. |
| 59 | M&L disconnecting & removing the unserviceable AC wiring from AMF panel of DG set of any type/any make/any model/any capacity and rewiring with the same with suitable new copper wire to existing gauge wire by providing flexible pipe including making all electrical connections as per OEM recommendation for satisfactory completion of job & replacement of electrical/electronic spares and testing etc complete all as specified and directed. Note: (i) The rate quoted deemed to be inclusive of new copper wire cost in the unit rate. (ii) Electrical/Electronic spares shall be measured & paid separately under relevant items. |
| 60 | Supply only following spare parts :- Push buttons. |
| 61 | AMF Panel Hooter |
| 62 | Earth fault relay. Make: OEM recommended |
| 63 | Over load relay. Make: OEM recommended |
| 64 | Over/Under voltage relay. Make: OEM recommended |
| 65 | Auxilary relays 12v/6Amps Make: OEM recommended |
| 66 | Power Contactor4 pole,02 NO +NC,400Amps |
| 67 | Power Contactor4 pole,02 NO +NC,250AmpsAmps, |
| 68 | Power Contactor4 pole,02 NO +NC,200Amps |
| 69 | Single phase preventer, make:minilec/GIC |
| 70 | Auxiliary Relays 24Volts / 6A Make: OEM recommended |
| 71 | PLC based AMF relay unit Make: OEM recommended |
| 72 | Low lube oil safety switch Make: OEM recommended |
| 73 | Booster Relay 24Volts / 10A Make: OEM recommended |
| 74 | Battery charger 24 V /10A panel mounting type Make: OEM recommended |
| 75 | Battery charger 12 V /10A panel mounting type Make: OEM recommended |
| 76 | Coolant temperature sensor Make: OEM recommended |
| 77 | Power contactor 4 pole, 02NO+02NC,63 Amps , |
| 78 | contactor operating coil ofPower Contactor4 pole,02 NO +NC,250AmpsAmps, |
| 79 | contactor operating coil of Power Contactor4 pole,02 NO +NC,200Amps, |
| 80 | contactor operating coil ofPower Contactor4 pole,02 NO +NC,100Amps, |
| 81 | contactor operating coilofPower contactor 4 pole, 02NO+02NC,63Amps, |
| 82 | M&L for Removing the defective charging dynamo of capacity 24 Volt DC any make, model, any capacity and opening it, by removing all nuts and bolts, cleaning with necessary cleaning agent and overhauling lubricating of therewinding the damaged winding of field coilswith super enameled copper wire suitable tosame existing size/gauge & reconnecting the same, refixing back, in original position including making all necessary electrical/mechanical connectionstesting and commissioning complete all as directed by Engr-in-charge. |
| 83 | M&L for Removing the defective charging dynamo of capacity 12 Volt DC any make, model, any capacity and opening it, by removing all nuts and bolts, cleaning with necessary cleaning agent and overhauling lubricating of therewinding the damaged winding of field coilswith super enameled copper wire suitable tosame existing size/gauge & reconnecting the same, refixing back, in original position including making all necessary electrical/mechanical connectionstesting and commissioning complete all as directed by Engr-in-charge. |
| 84 | M&L for replacementof unserviceable spares for water manifold and Radiator spares up to 63 KVA DG set for the following spares:- Radiator rubber hoses. |
| 85 | Clamp for hump hose. |
| 86 | Hose clamps. |
| 87 | hump hose. |
| 88 | M&L for replacementof unserviceable spares for water manifold and Radiator spares above 63 and up to 182.5 KVA DG set for the following spares:- Radiator rubber hoses. |
| 89 | Clamp for hump hose. |
| 90 | Hose clamps. |
| 91 | hump hose. |
| 92 | M&L for replacementof unserviceable spares for water manifold and Radiator spares above 182.5 KVA and up to 250 KVA DG set for the following spares:- Radiator rubber hoses. |
| 93 | Clamp for hump hose. |
| 94 | Hose clamps. |
| 95 | hump hose. |
| 96 | M&L for Inhibitor corrosion (coolant additive concentrate) required for top up (TVS Make) complete all as directed by Engr-in-charge. |
| 97 | Supply and topping up of acid mixture suitable for lead acid batteries of 12 volts complete all as directed by Engr-in-charge. |
| 98 | Supply and topping up of distilled water suitable for lead acid batteries of 12 volts complete all as directed by Engr-in-charge. |
| 99 | S&F battery brass terminal and jelly complete all as specified and directed. |
| 100 | M&L for Disconnecting all connection & remove the PT pump from engine and transport to OEM authorized service center and Calibration of PT pump for maximum efficiency by OEM Authorized Service center & replacement of PT Pump kit, gear gasket, etc in its original position by making all necessary connections complete whichever required under AGE E/M-I(U) AOR for smooth functioning of flowingDG Set capacities complete all as directed by Engr-in-charge DG Set capacity up to 30 KVA |
| 101 | DG Set capacity above 50to 250KVA |
| 102 | M&L for remove the fuel injection pump from the engine transport to an authorized service centre for service, calibration and to adjust by replacing the followingun serviceable worn-out spares with new appropriate make minor spares and bringing and fixing to the engine and tune up for maximum efficiency all as specified and as directed for DG set capacityup to 63 KVA :- Note: Major spares required will be measured and paid separately. |
| 103 | Supply only orifice for up to 63KVA capacity DG set |
| 104 | Supply only Barrel and Plunger for up to 63KVA capacity DG set |
| 105 | Supply only FIP Bearingfor up to 63KVA capacity DG set |
| 106 | M&L for remove the fuel injection pump from the engine transport to an authorized service centre for service, calibration and to adjust by replacing the following un serviceable worn-out spares with new appropriate make minor spares and bringing and fixing to the engine and tune up for maximum efficiency all as specified and as directed for DG set capacity above 63 KVA and up to 250KVA :- Note: Major spares required will be measured and paid seperately. |
| 107 | Supply only FIP Bearingfor above 63 KVA and up to 182.5KVA capacity DG set |
| 108 | M&L for remove the fuel injection pump from the engine transport to an authorized service centre for service, calibration and to adjust by replacing the following unserviceable worn-out spares with new appropriate make minor spares and bringing and fixing to the engine and tune up for maximum efficiency all as specified and as directed for DG set capacity above 50 KVA and up to 250KVA :- Note: Major spares required will be measured and paid seperately. |
| 109 | Supply only orifice for above 50 KVA and upto 250KVA capacity DG set |
| 110 | Supply only Barrel and Plunger for 50 KVA and up to 250KVA capacity DG set |
| 111 | Supply only FIP Bearingfor above 50 KVA and up to 250KVA capacity DG set |
| 112 | Supply and fix self starter Motor, 24 volts, Make LUCAS or its equivalent make approved by OEM of DG Set suitable for existing DG set above 50 KVA to 250 KVA including making all necessary electrical/mechanical connection as per recommendation of OEM of DG Set & dismantling/taking out old unserviceable self starter Motor from existing positioncomplete all as directed by Engr-in-charge |
| 113 | Supply and fix self starter Motor, 12 volts, Make LUCAS or its equivalent make approved OEM of DG Set suitable for existing DG set capacity up to250 KVAincluding making all necessary electrical/mechanical connection as per recommendation of OEM of DG Set & dismantling/taking out old unserviceable self starter Motor from existing positioncomplete all as directed by Engr-in-charge |
| 114 | M&L for Servicing of DG Set panel"s MCCB Breaker indoor/outdoor type of any make/model/capacity, checking of switching ON/OFF& tripping system, checking of all electrical mechanical components of AMF panel and Setting the same for proper working of Breaker, testing of operation manually and auto mode complete all as directed by Engr-in-charge. Note:-All the mechanical parts are thoroughly cleaned by suitable cleaning agent & moving parts are properly lubricated |
| 115 | Supply, install, test, commissioning & run the DG set"sFly-wheel Ring of Fly-wheel Assembly of existing model, sizesuitable to DG Set of capacity up to 250 KVA including taking down old Unserviceable complete all asdirected by Engr-in-Charge. |
| 116 | Disconnect the Radiator and kept aside safely and taking down the old unserviceable water pump from the existing engine of DG set any make/model, capacity up to 250KVAsupply and fixing of new water pump &kit, reassembling the same and refixing the pump to the engine of DG set, refixing Radiator and testing,including making all Electrical/mechanical connections, commissioning as per OEM recommendation complete all as directed by Engr-in-charge. |
| 117 | Supply, Fix & test run the DG set after replacing Diesel feeder Pumpof existing model, sizesuitable to DG Set of capacityup to 250 KVA including taking down old unserviceable complete all asdirected by Engr-in-Charge. |
| 118 | Supply, Fix Diesel benjo Hose pipes of 1.0 Meter length with both edges brass clampsof existing modelsuitable to DG Set of capacity up to 250 KVA including taking down old unserviceable complete all asdirected by Engr-in-Charge. |
| 119 | M&L for disconnecting all electrical & mechanical connections, Dismantle the Engine (make KIRLOSKER/ CUMMINS /GREAVES/ GREAVES COTTON/ASIATIC/ RUSTON)from 50 KVA to 250 KVA DG set capacities located at various location under AGE E/M-I(U)and transported to OEM Authorized service center for complete overhauling, replacing the followingunserviceable worn-out spares with new appropriate make minor spares & major spares (minor spares- up to Rs2500/Each), after assembling the spares the Engine again shifted to original existing place and reassembled to alternator& radiator, AMF panel/Electrical panel board of DG set complete testing,commissioningall as per OEM recommendation and as directed by Engr-in-charge. The quoted rate inclusive of Manpower, Crane charges for transporting engine to workshop and back after repairs Note: -(i)Major Spare parts shall be measured and paid separately. |
| 120 | Gear fuel Pump |
| 121 | Total Gakets Set |
| 122 | Core & cooler set |
| 123 | Shaft rocker arm |
| 124 | Oil seal |
| 125 | Ball Bearings set |
| 126 | Main Bearings set(STD) |
| 127 | Material and labour for repairs to Alternator of following DG Set, transporting the same to theOEM authorized service center/work shop and carrying out the repairs such as taking out the burnt out winding and rewinding the alternator with copper wire of same gauge turns and weight, checking of commentator, brushescomplete and refixing the same in its existing position after transporting back to the site and connecting up electric connections with suitable lugs complete and testing all as specified and directed. Note: Copper winding material will be measured and paid seperately under relevant Item |
| 128 | Upto 50 KVA capacity |
| 129 | Above 50 KVA and up to 250 KVA Capacity |
| 130 | Supply only High conductivity copper conductor winding material including necessary insulation material as required for complete all as specified and directed by Engr-in-Charge |
| 131 | M&L taking down defective Turbo Charger Assembly duly disconnecting the mechanical and electrical connections from DG Set, opening and thoroughly checking to carry out repairs complete to the Turbo Charger Kit and spares as required at site including any mechanical and reassembling and refixing the turbo charger assembly to its original position and reconnecting the same for the following capacities including testing complete all as specified and directed. |
| 132 | DG Set of capacity above up to250KVA |
| 133 | M&L for calibration of water pump complete, overhauling, replacing of gaskets, nuts, washers etc and reassembling the same and refixing the pump to the engine and testing including taking down the old unserviceable water pump of any capacity of DG set from the engine and taking it out side work to workshop, complete all as specified and directed:- |
| 134 | DG Set of capacity 10 KVA To 50 KVA |
| 135 | DG Set of capacity above 182.5KVA and up to250KVA |
| 136 | M & L for dismantling & disconnecting all connection of the cylinder heads from diesel engine and sent to OEM authorized Service center for calibration and repairs by replacing the spares such as Valves, Value Guides, Valves seats and repairs kit and re-assembling to its original position with necessary Engine cylinder head gasket and O rings for the following capacities including testing complete all as specified and directed:- |
| 137 | DG Set of capacity 7.5 KVA To 30 KVA |
| 138 | DG Set of capacity above 50 KVA and up to 250KVA |
| 139 | M&L preparation of old painted surfaces of the DG Sets of the 7.5 KVA to 25 KVA capacity including degreasing and spray painting the DG sets with one coat of synthetic enamel paint of approved colour and writing SM/MES No including painting on concrete surfaces of foundations with black paint complete all as specified and directed. |
| 140 | M&L preparation of old painted surfaces of the DG Sets of the above 25 KVA and up to 50 KVA capacity including degreasing and spray painting the DG sets with one coat of synthetic enamel paint of approved colour and writing SM/MES No including painting on concrete surfaces of foundations with black paint complete all as specified and directed. |
| 141 | M&L preparation of old painted surfaces of the DG Sets of the above 200 KVA and up to 250 KVA capacity including degreasing and spray painting the DG sets with one coat of synthetic enamel paint of approved colour and writing SM/MES No including painting on concrete surfaces of foundations with black paint complete all as specified and directed. |
| 142 | M & L earthing complete with galvanized steel earth plate electrode 60cmx 60cmx 6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanized iron earth strip 32 x 6mm dia, by means of nuts, bolts,check nuts and washer etc of galvanized iron and earth lead protected by provision of GI pipe medium grade 40mm bore from earth electrode to test pointincl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part I and connection to earth test point including testing on completion all as directed. Note:- Item of earthing includes cost of 7.5m long galvanized iron earth strip of 32 x 6mm size and protection pipe of 40mm bore GI medium grade. |
| 143 | S&F in replacement of microprocessor based control unit suitable to DG set of 200 KVA to 250 KVA capacity with all listed parameters as per recommendation including testing complete all as specified and directed. |
| 144 | M&L on load change over switch 400 Amps capacity suitable for 3 phase, 4 pole, 415 Volts, font handle operated suitable in open execution type for fixing in existing panels including necessary lugs, glands., nuts, bolts including taking down old unserviceable one complete all as specified and directed |
| 145 | M&L on load change over switch 200 Amps capacity suitable for 3 phase, 4 pole, 415 Volts, font handle operated suitable in open execution type for fixing in existing panels including necessary lugs, glands., nuts, bolts including taking down old unserviceable one complete all as specified and directed |
| 146 | Supply and connect LT 1100 V outdoor type cable straight through heat shrinkable epoxy joint kit suitable for the following sizes with necessary jointing materials complete all as directed by Engr-in-charge. 3.5 core x 25/35 sqmm. |
| 147 | All as per item No 78 above but 3.5 core x 70/95 sqmm. |
| 148 | All as per item No 78 above but 3.5 core x 120/150 sqmm. |
| 149 | Supply, test, install & commissioning ofBus bar chambers(including 4 bus bars i.e R,Y,B and neutral),3-Ph with netral,1100volts,50Hzincluding suitable sheet metal enclosure along with necessary screws, nuts, bolts and other Misc accessories and making connections(input &out put) with cable terminal ends complete for the following current carrying capacities (a)4-Way, 100 Amps |
| 150 | All as per item No 79 above but 4-Way, 250Amps |
| 151 | Disconnecting & taking out unserviceable MCCB and Supply, test, install & commissioning of newMCCB 4 pole, 400Amps, 50kA, 415volts, 50 Hz with adjustable settings & thermal, magnetic realse, suitable for existing panel(frame size shall be matched with existing one) of the following capacities for fixing in panel board/sheet metal enclosures/distribution boards with necessary cable connections, suitabel lugs, glands ,nuts, bolts and screws complete all as specified and directed. |
| 152 | Supply & Fixing of3 pole MCB,32-63amps,C-curve,10kA,50Hz,440v in existing panel including necessary wiring & misc accessories for satisfactory completion of job and taking down old unserviceable one complete all as directed by Engineer-in-Charge. |
| 153 | Supply, test, laying & commissioning of XLPE insulated, armored (heavy duty) electric cable with aluminium stranded conductor, 1100 volts grade, laid in trenches / duct/ fixed to wall with suitable size clamps / passing through pipe/Tunnel/under ground/surface up tothe termination point(as directed by Engr-in-Charge) with necessary end terminations with suitable size cable lugs, cable glands, fixing of lugs with crimping with tool, nuts, bolts etcof the following sizes and including taking out unserviceable burnt out cable from its existing location complete all as specified and directed by Engr-in-Charge :- |
| 154 | 3.5 Core X 35 Sqmm |
| 155 | 3.5 Core X 50 Sqmm |
| 156 | 3.5 Core X 70 Sqmm |
| 157 | 3.5 Core X 95 Sqmm |
| 158 | 3.5 Core X 120 Sqmm |
| 159 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depthfor foundation, laying of poles in trenches and getting out in Hard soil complete all as specified and as directed Engineer-in-Charge. |
| 160 | Returning, filling including spreading, leveling, watering and well ramming in layers not exceeding 25 cms thick complete all as directed by Engineer-in-Charge. |
| 161 | Removal of surplus soil to a distance no exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtrs above from the starting point complete all as directed by Engineer-in-charge. |
| 162 | Supply and spread approved dry river sand for foundations/Cable duct including watering and consolidation, cushioning of cable laid in trenches complete all as directed by Engr-in-Charge Note:- Punned thickness will be measured for payment purpose |
| 163 | Supply and Lay bricks common burnt clay building bricks sub class B of size 230 x 115 x 75 mm complete all as specified and directed. |
| 164 | M & L Galvanized iron tubing 80 mm dia light grade laid in trenches/floors/walls for earth lead protection and cables at road crossing etc complete all as specified and directed. |
| 165 | M & L cutting of road, hard standing made of concrete or premix carpet, WBM, soiling and morrum filling including excavation for laying of cable pipe all as directed and making good the road/hard standing by using all old/new materials and with PCC (1:2:4) etc, required to match with the existing surface complete all as specified and directed. |
| 166 | Supply & Fixing of 200/5 Amps Current transformers -03Nos(in three phases) including necessary wiring & misc accessories for satisfactory completion of job taking down old unserviceable one complete all as directed by Engineer-in-Charge. |
| 167 | S&F twin core 2.5 Sqmm service wire 1100V grade heavy duty with PVC insulated aluminium stranded conductor served with inner sheatning of PVC tape andPVC sheathed including taking down old unserviceablecomplete all as directed. |
| 168 | S&F twin core 4 Sqmm service wire 1100V grade heavy duty with PVC insulated aluminium stranded conductor served with inner sheatning of PVC tape andPVC sheathed including taking down old unserviceablecomplete all as directed. |
| 169 | S&F twin core 6 Sqmm service wire 1100V grade heavy duty with PVC insulated aluminium stranded conductor served with inner sheatning of PVC tape andPVC sheathed including taking down old unserviceable complete all as directed . . |
| 170 | S&F twin core 10 Sqmm service wire 1100V grade heavy duty with PVC insulated aluminium stranded conductor served with inner sheatning of PVC tape and PVC sheathed including taking down old unserviceable complete all as directed. |
| 171 | Material and labour for Batery charger, maintenance free, used to charge batteries rating 30 Ah to 360 Ah, comprises 4 MCB foronline chargingof Batteries and necessary fixing arrangement as per the site requirement complete all as specified and as directed |
| 172 | Supply and Replacement of Solar Glassof 100 to 125LPD suitable for existing panel complete all as specified and directed. |
| 173 | Supply and Replacement of Solar Glass of 200to 300 LPD suitable for existing panel complete all as specified and directed. |
| 174 | Supply and Replacement of Solar main heating Tank of capacity 200to 300 LPD suitable for existing Tank complete all as specified and directed. |
| 175 | M&L for Servicing of Solar water Heater 200 to 300 LPDHHC System including changing of gasket,minorspares part as per requirement on site complete all as specified and directed |
| 176 | M&L for Servicing of Solar water Heater 100 to 125 LPDHHC System including changing of gasket, minorspares part as per requirement on site complete all as specified and directed |
| 177 | Supply and fix GI Pipe medium grade of 20mm dia with all fittings such as union, elbows tee , bendetc laid on wall/ ceiling complete all as specified and directed |
| 178 | Supply and fix GI Pipe medium grade of 25 mm dia with all fittings such as union, elbows tee , bendetc laid on wall/ ceiling complete all as specified and directed |
| 179 | Supply and fix GI Pipe medium grade of 15 mm dia with all fittings such as union, elbows tee , bendetc laid on wall/ ceiling complete all as specified and directed |
| 180 | Supply and fix gun metal , globe or gate valve of 15 mm dia with iron wheel headscrewed both ends for iron pipe and fix on wall/ground |
| 181 | Supply and fix gun metal , globe or gate valve of 25 mm dia with iron wheel headscrewed both ends for iron pipe and fix on wall/ground |
| 182 | Supply and fix gun metal , globe or gate valve of 20 mm dia with iron wheel headscrewed both ends for iron pipe and fix on wall/ground |
| 183 | M&L forChemical washing of collector and storage tank by using Hydro chlorine chemical oil (with in three to four month) all as per site requirement and directed byEngineer in Charge. |
| 184 | M & L for Cleaning of panel glass with soap oil (within three to four months) as per site requirement |
| 185 | Removing unserviceableand refixing the new one sacrificial anode as per site requirement complete all as specified and directed |
| 186 | Removing unserviceableand thermostate fixing the newas per site requirement complete all as specified and directed |
| 187 | Removing unserviceable and refixing the new one heating elements suitable for existing make and size single phase 2kw, 230 V complete all as specified and directed |
| 188 | Removing unserviceable and refixing the new one Air Wind values for presser suitable for existing system complete all as specified and directed |
| 189 | M&L for checking the inlet and outlet piping, fixing GI pipes , value , flange joints up to bib cocks and arresting the leakage if any , recording the temperate of the hot water and servicing overall system complete all as specified and directed |
| 190 | Supply & fix 90 watts LEDlight fittings new generation energy saving , environmental friendly ,long life, versatile pressure die cast aluminium IP65 with 10KV nominal voltage surge protection ,luminaire with high power LED as light source and suitable drivers etc for Pump house/Power house/Sub Station/ Over head Tank /AOR incl taking down old unserviceable one complete all as specified and directed |
| 191 | Supply & fix 45 watts LEDlight fittings new generation energy saving , environmental friendly ,long life, versatile pressure die cast aluminium IP65 with 10KV nominal voltage surge protection, luminaire with high power LED as light source and suitable drivers etc for Pump house/Power house/Sub Station/ Over head Tank /AOR incl taking down old unserviceable one complete all as specified and directed |
| 192 | Supply & fix 70watts LEDlight fittings new generation energy saving , environmental friendly ,long life, versatile pressure die cast aluminium IP65 with 10KV nominal voltage surge protection ,luminaire with high power LED as light source and suitable drivers etc for Pump house/Power house/Sub Station/ Over head Tank /AOR incl taking down old unserviceable one complete all as specified and directed |
| 193 | Supply & fix 50watts LED Floodlight fittings new generation energy saving , environmental friendly ,long life, versatile pressure die cast aluminium IP65 with 10KV nominal voltage surge protection ,luminaire with high power LED as light source and suitable drivers etc for Pump house/Power house/Sub Station/ Over head Tank /AOR incl replacement of bracket and taking down old unserviceable one complete all as specified and directed |
| 194 | Supply & fix 120 watts LEDlight fittings new generation energy saving , environmental friendly ,long life, versatile pressure die cast aluminium IP65 with 10KV nominal voltage surge protection ,luminaire with high power LED as light source and suitable drivers etc for Pump house/Power house/Sub Station/ Over head Tank /AOR incl taking down old unserviceable one complete all as specified and directed |
| 195 | S&F in repairs Electronic drivers suitable for 60/72 W LED fittings suitable to operate on input voltage of AC 100-265 V, 50 Hz including taking down and refixing after repairs complete all as specified and directed. |
| 196 | S&F in repairs Electronic drivers suitable for 90 W LED fittings suitable to operate on input voltage of AC 100-265 V, 50 Hzincluding taking down and refixing after repairs complete all as specified and directed. |
| 197 | S & F hot press moulded SMC junction / terminal box of size with internal dimensions of 200 x 140 x 95 mm with hinged door, incl provision of 2 way connector415 Volts made out of polycarbonate or bakelite and 1 No MCB of 6 Amps with DIN bar, drilling holes for cable connections, connecting incoming and or out going cables by providing suitable of size of cable lugs/glands, fixed on pole by means of clamps made out of MS flat iron of size 25 mm x 3 mm including dismantling of old unserviceable all as specified and as directed. |
| 198 | Supply and lay PVC Insulated , PVCsheathed industrial HV round multicore flexible cablewithcopper conductor 3 core 2.5 sqmm including PVC conduit 20mm dia medium grade and necessary bends, fittings and fixturesas required for connection of light fittings . Note : Used for garden light connection, excavation, retuning filling etc will be measured and paid separately. |
| 199 | Supply and fixing in repair Rotational moulded polyethylene water storage tanks 500ltrs(cylindrical vertical with closed top) hoisted and fixed in position and fixed in position all as specified in SSR part I Notes for all items :- (a) Daily Collecting of complaintsfromJE/AGEisresponsibility of Contractor. After collecting Complaints from Complaint Register or Instruction by JE by Phone/SMS, complaint should be completed within 48 Hours of complaint receiving, Major complaints/AMF panel wiring/Rewinding etc items should becompleted within 05 days, (b)Minimum 01 Technician with all tools, ladder and testing Equipment, as per the site requirement shall be provided by contractor. (c) Every month complete testing for serviceability of DG Set for all Generator shall be done and reports submitted to Engr- in -Charge at the end of every month (if items required shall bepaid under relevant items given above). (d)Documents required for complaints like Stationery, Complaint Register, Slips & Site Order Book shall be provided by the contactor.(e) safety precautions shall be responsible by the contractor. (f) Contractor to comply all the respective notes of Particular Specifications attached. |
| 200 | STP Supply, Install, Testing and Commissioning of Advance Maintenance Free G.I. SAFE EARTHINGElectrodewith PIPEof not less than 50 mm outer dia) and two meterlength, The electrode should be ofgalvanized (80 -100 micron) along with earth lead as Galvanized steel strip of size 32 X6 mm7.5 m. The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM). The GI electrode shall be surrounded with 25 kg BackFill compoundto provide maximum contact between the electrode and Back Fill Compound. The earting pitcover should be factory built (sizeTOP- 10 Inch, Bottom -13 Inch, Height 10.25 Inch ) made of heavy duty Polypropylenecomplete all as specified and directed. Make:ASHLOK/INDELEC/JMV/TERCEL/TRUE POWER |
| 201 | M&L for removal sludge and complete cleaning of all sludge tank pertaining to 100 KLD STP functioning at 68 Med regt and sending sludge to Faecal Sludge Treatment Plant (FSTP) complete all as specified and directed. Note: Contractor should visit the site to understand site condition as well as the condition of 68 Med Regt before coating the rates. No claim in this regard will be entertained during execution stage. |
| 202 | Supply of New Micron Catridges along with Housing suitable for STP of capacity 100 Cum/day incl taking down old unsv all as specified and directed by the Engr-in-charge |
| 203 | M&L for servicing and over hauling of 3/5HP induction motor including varnishing the stator and replacing the worn out drive end/driven end bearings, greasing, reassembling and testing complete all as directed AT STP |
| 204 | M&L for servicing and over hauling of 1/2 HP induction motor including varnishing the stator and replacing the worn out drive end/driven end bearings, greasing, reassembling and testing complete all as directed |
| 205 | M&L for emptying cleaning of sand media filter including welding work etc. Replacing ofActivated Carbon Filter media (ACF) -400 KG, Grade IV-900- Sand of 400 KG, size of layer resing - 250 Kg as complete all as specified and directed. Makes: Granular/Norit/Equel, Including Bacteria of 1200 Ltrs Make : - DRDO Anaerobic Bacteria/Inoculum. Note: Cert of DRDO authorized dealer to be enclosed. ACF Media combination quality & quantity shall be as directed & recommended by OEM only. (1) The manufacturer shall comply and guarantee the authenticity of the product by providing Test Certificate with Hologram which will be provided by the Authorized Distributor at the distribution point for each Batch of Product delivered on their letter head. (2) The manufacturer will affix its hologram on each and every drum/container/bag. If the said product is delivered without the said hologram and/or it is seen to be tampered, then the product can be discarded as spurious. (3) Replacing of existing Dosing pump with latest Dosing pumps of UC-11 model, Max 4.0 LPH @ 5.5 bar Antisyphon valve, foot valve, 3m LDPE tubing. Make: - Focus /E Dose/UKL/Milton Roy Note : Contractor should visit the site to understand site condition as well as the condition of dhruva STP before coating the rates. No claim in this regard will be entertained during execution stage. |
| 206 | After execution of the above said maint work :- (1) Tech team will visit every month for one year to inspect and will do the service if any required. (2) Every month collecting of water sample from the location andtesting of inlet and out let sewage sample from a NABL approved lab. (3) Service visit as and when required if there is an issues, (with in 24 Hours). (4). Replacement of Oil and Grease (5). Backwash and rinse for filters (6). Minor Spares upto 15000 is included. Excluding winding of motors. (7). Training for Sewage Treatment Plant operators of 8 Hours for 10 days on the site to make the operators fully skilled to operate or control the entire process or system machines, control boards, to transfer or treated water complete all as specified and directed by Engr-in-Charge. |
| 207 | Supply and replace Bar Screen of100 KLD STPmade out of SS 304 stainless steel solid bar bucket type complete all as specified and directed. |
| 208 | Supply and laying water proof HV ROUND CABLEcablePVCmulti stranded copper conductor 3 core 2.5sqmm 1100 volts grade L complete all as directed |
| 209 | M&L for removal of sewage and garbage from MBBR tank and painting inside and outside with one coat of red oxide and two coat of synthetic enamel paint and cleaning of fiver setting plated of MBBR tankcomplete all as specified and directed by Engr-in-Charge |
| 210 | Material and labour for MBBR fluidized bio-media of vergin PPUV stabilized material, cylindrical with external fins structure, black colour,22mm dia x 16mm height ,specific gravity 0.9 to 0.95 gms/sqcm all as specified and as directed . Make: TP Aqua/Cool tech/Hydrotech as approved |
| 211 | Material and labour Bactria culture for STP for developing MLSS and control odor complete all as directed by Engr-in-Charge. Make: Organic plus or its techno commercial equivalent make approved by GE. |
| 212 | M&L for rewinding of the electric motor of above 5Hpupto 7.5 HP capacity duly disconnecting (electric/water connection) and taking down electric motor (mono block/centrifugal) from the existing position and inspecting the same, transporting to workshop for repairs and bringing it back. Cutting and removing the burnt out winding conductors, rewinding the same with same gauge and weight of insulated super enameled copper conductor and providing cotton insulated sleeves, varnishing, drying, refixing in position checking the alignment along with pump set connecting up with the electricaland water line connection system, testing and commissioning complete all as directed. |
| 213 | M&L for rewinding of the electric motor ofupto 5 HP capacity duly disconnecting (electric/water connection) and taking down electric motor (mono block/centrifugal) from the existing position and inspecting the same, transporting to workshop for repairs and bringing it back. Cutting and removing the burnt out winding conductors, rewinding the same with same gauge and weight of insulated super enameled copper conductor and providing cotton insulated sleeves, varnishing, drying, refixing in position checking the alignment along with pump set connecting up with the electricaland water line connection system, testing and commissioning complete all as directed. |
| 214 | Opening of the unserviceable bearing from the centrifugal pump set replacing the same with the new bearing set suitable for motor/ pump set 7.5HP capacity including re-aligning the pump and motor complete all as directed. |
| 215 | Opening of the unserviceable bearing from the centrifugal pump set renewing the same with the new bearing set suitable for motor/ pump set 1/2/3/5hp capacity including re-aligning the pump and motor complete all as directed. |
| 216 | Supplying of "Aquafit" Brand calcium hypochloride 65-70% chlorine content in granular form to mix with drinking water which is received at Pump house for purifying the water & maintaining its PPM, complete all as specified and directed. Make: Sree rayalama Hi-Strength Hypo ltd or Equivalent. |
| 217 | Repairs to sewage pump including replacing the impeller upto 5 HP mud pump Kirloskar and unserviceable parts viz bushes, gland cover with nut bolts gland ropeetc complete all as directed by Engr-in-Charge. |
| 218 | Repairs to sewage pump including replacing the impeller above 5 upto 7.5 HP mud pump Kirloskar and unserviceable parts viz bushes, gland cover with nut bolts gland ropeetc complete all as directed by Engr-in-Charge. |
| 219 | Reconditioningof shaft by metal filling and machining as required andreplacement of shaft sleeves with new one of capacity rating up to 5 hp pump set Note :- Withoutcausing any interruption of regularwater supply and complete all as directed by Engineer-in-Charge. |
| 220 | Reconditioningof shaft by metal filling and machining as required andreplacement of shaft sleeves with new one of capacity above 5hp up to 7.5hp pump set Note :- Withoutcausing any interruption of regularwater supply and complete all as directed by Engineer-in-Charge. |
| 221 | Repairs/replacent of wornout spares ofAir blower 3-ph,415volts,50hz of capacity 130cum/hr @0.4KSC,twin loop type including suction filter ,motor pully & replacement of unserviceable spares such as"V" belt, bearings, shaft, suction filter, motor pulley & blower motor oilwith new oneincluding all necessary misc items for satisfactory completion of job complete all as Specified & directed by Engr-in-Charge |
| 222 | M&L cleaningthe all/any type of tanks pertains to sewage treatment plant 100KLD of receiving sump(collection tank)with suitable chemicals, drying the tanks and disposal of Dry sludge minimum distance of 1km radius from STP location & maintain high level hygiene in STP premises complete all as specified and as directed by Engr-in-Charge. Note: (i) For disposal of dry sludge contactor shall make arrange transport sysytem quoted rate shall be inclusive in unit rate. |
| 223 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for laying ofmains / Poles, stay, cables and the like not exc 10 sq m on plan and not exc 1.5 m in depth and getting out in Hard / Densesoil complete all as specified and directed. |
| 224 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed. |
| 225 | Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 226 | S&F in repairs CI foot valve leather sheet type / flange type suitable for 80 mm dia GI suction heavy duty including replacement of nuts, bolts washers, gaskets and flanges etc. complete all as directed and specified by Engr-in-charge. |
| 227 | S&F in repairs CI foot valve leather sheet type / flange type suitable for 50 mm dia GI suction heavy duty including replacement of nuts, bolts washers, gaskets and flanges etc. complete all as directed and specified by Engr-in-charge. |
| 228 | S&F in repairs PVC foot valve leather sheet type / flange type suitable for 50 mm dia GI suction heavy duty including replacement of nuts, bolts washers, gaskets and flanges etc. complete all as directed and specified by Engr-in-charge. |
| 229 | Supply, lay and fixing steel water tubes,medium grade, galvanized with all fitting laid in trenches as in repairs complete all as specified and directed forfollowing bore of pipes :- |
| 230 | 25 mm bore. |
| 231 | 40 mm bore. |
| 232 | 50 mm bore. |
| 233 | Supply and fix gun metal gate valve, ISI marked connected with iron wheel head, screwedat both ends for iron pipes and fixed including taking down of unserviceable gate valve complete all as specified and directed for the following sizes:- |
| 234 | 25 mm bore. |
| 235 | 40 mm bore. |
| 236 | 50 mm bore. |
| 237 | Supply and laying of 3-layer PP-R Polypropylene random copolymer pipes SDR 7.4 & SDR 11 UV Stabilized and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches etc all as specified and directed of following bores. |
| 238 | 25 mm bore. |
| 239 | 50 mm bore. |
| 240 | Supply and fix 25 mm PP-R Gate valves ( brass insert) as per requirement of the site complete all as specified and directed |
| 241 | Supply and fix 50 mm PP-R Gate valves ( brass insert) as per requirement of the site complete all as specified and directed |
| 242 | M&L for servicing and over hauling of 3 HP Open well submersible pump set including varnishing the stator and replacing the worn out drive end/driven end bearings, greasing, reassembling and testing complete all as directed |
| 243 | M&L for rewinding of the electric motor of above 5Hpupto 7.5 HP capacity duly disconnecting (electric/water connection) and taking down electric motor (open well submersible) from the existing position and inspecting the same, transporting to workshop for repairs and bringing it back. Cutting and removing the burnt out winding conductors, rewinding the same with same gauge and weight of insulated super enameled copper conductor and providing cotton insulated sleeves, varnishing, drying, refixing in position checking the alignment along with pump set connecting up with the electricaland water line connection system, testing and commissioning complete all as directed. |
| 244 | M&L for servicing and over hauling of 5/7.5 HP Open well submersible pump set including varnishing the stator and replacing the worn out drive end/driven end bearings, greasing, reassembling and testing complete all as directed |
| 245 | M&L for rewinding of the electric motor of above 5Hpupto 7.5 HP capacity duly disconnecting (electric/water connection) and taking down electric motor (open well submersible) from the existing position and inspecting the same, transporting to workshop for repairs and bringing it back. Cutting and removing the burnt out winding conductors, rewinding the same with same gauge and weight of insulated super enameled copper conductor and providing cotton insulated sleeves, varnishing, drying, refixing in position checking the alignment along with pump set connecting up with the electricaland water line connection system, testing and commissioning complete all as directed. |
| 246 | M&L for servicing and over hauling of 3/5 HP Induction motor pump set including varnishing the stator and replacing the worn out drive end/driven end bearings, greasing, reassembling and testing complete all as directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
