Tender For Revised Estimate For P.S. To 27 No. Dlf Electrification At Village Siralidad Mohalla Under Ladkui D/C Of (Oandm) Dn. Bhairunda
Tender Value
4.96 Lakhs
Estimated cost
Bid Submission
04 Jan 2024
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mohalla → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Revised Estimate For P.S. To 27 No. Dlf Electrification At Village Siralidad Mohalla Under Ladkui D/C Of (Oandm) Dn. Bhairunda
BOQ
| Sl. No. | Item Description |
| 1 | DTR 11/0.4 KV BIS Level-III Conventional 63 KVA |
| 2 | 140 Kg.,8.0 Mtrs. long PCC pole |
| 3 | 200 Kg., 9 Mtrs. long PCC pole |
| 4 | AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 5 | AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) |
| 6 | LT XLPE Cable Arial Bunch 3X50 + 1X16 + 1X35 Sq mm. 1100 Volts with aluminium alloy Bare messenger wire |
| 7 | XLPE Cable 1 core unarmoured 50 sqmm Aluminium conductor 1100 Volts |
| 8 | XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts |
| 9 | Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box |
| 10 | M S Channel 100X50x6 mm |
| 11 | M S Channel 75X40x6 mm |
| 12 | M S Angle 65X65X6 mm |
| 13 | M.S.Angle 50x50x6 mm |
| 14 | M.S.Flat 50x6 mm |
| 15 | 9 KV Gapless type ( 5KA) Polymer for DTR |
| 16 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 17 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 18 | 11 KV Strain hardware (T&C type) fittings |
| 19 | 11 KV D.O. Fuse Unit Polymer type |
| 20 | Bi-metallic clamps Distribution Transformers Bushing |
| 21 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 22 | MS strain plate 65x8mm 250mm long |
| 23 | Danger Boards Enamelled 11 KV |
| 24 | Red oxide paint |
| 25 | Aluminium paint |
| 26 | Aluminium Binding wire and tape |
| 27 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 28 | M.S.Nuts with Bolts |
| 29 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 30 | Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole |
| 31 | Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor |
| 32 | Stay Wire 7/3.15 mm.(7/10 SWG) |
| 33 | Stay set complete without Stay wire 16 mm. (Painted) |
| 34 | Back filling of poles with boulders. |
| 35 | Stone Block/Pre cast block for base pedding (450X450X75MM) |
| 36 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 37 | G.I. Wire 4.0 mm. (8 SWG) |
| 38 | Stay Insulators 90X65mm |
| 39 | L.T. Distribution box with Isolator on Incoming with HRC fuse for 63 KVA DTR (200 Amp. Isolator & 6 SP of 60 Amp.) |
| 40 | LT A.B Cable tension clamps (Galvanized) |
| 41 | LT A B cable Suspension clamps (Galvanized) |
| 42 | Clamps for neutral for AB Cable |
| 43 | Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 44 | Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm) |
| 45 | Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector- |
| 46 | Three Phase Service connection box(Deep Drwan Metal Service Connection Boxes ) with one incoming up to 35 mm2 and 4 no outgoing up to 16 mm2 with insulated multiple outgoing connector- |
| 47 | G.I. STRIP 25X3 MM1 |
| 48 | G.I.Pipe 40 mm Dia C grade type |
| 49 | Bentonite compound powder |
| 50 | Galvanized nut & bolt with washer |
| 51 | DTR S/s fencing (31 feet) of 5\" barbet fencing on PCC support of 7No, 6\" Height |
| 52 | Double Gate (2No-2.5\"x5x) set of MS angle (25x25x4mm) with mesh & locking |
| 53 | Labour Charges |
| 54 | Transportation Charges for All Equipments & Materials |
| 55 | GST on Transportation@5% |
| 56 | GST on (Contractor side Material + Labour) @18% |
AI Tender Summary
Tender Timeline
Dec 27, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 04, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 05, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender