Food Corporation Of India-FCI has published Tender For Annual Repairs And Maintenance Of Electrical Installations At Bsc Hanuman Junction For The Year 2023-24. Submission Date for this Tender is 09-01-2024. Electrical Maintenance Tenders in Krishna Andhra Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Supplying of PVC/XLPE armoured cable with aluminium conductor 1.1 KV Gradeconfirming to IS 7098 (part I)1988 with upto date amendments of the following size at the site of work. |
2 | 3 X 10 Sq.mm |
3 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
4 | upto 35 Sq.mm |
5 | Laying and fixing of one number PVC insulated and PVC sheathed/XLPE Power cable of following size on wall surface as required |
6 | Upto 35 sq.mm (Clamped with 1mm thick saddle) |
7 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
8 | Upto 35 sq. mm |
9 | Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. |
10 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required |
11 | 100 mm dia |
12 | Supplying and fixing of following size of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
13 | 20 mm |
14 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. |
15 | 3 X 1.5 Sq mm |
16 | 6 X 1.5 Sq mm |
17 | 9 X 1.5 Sq mm |
18 | Supplying and fixing 20 A, 240V, SPN Industrial type socket outlet with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc, as required. |
19 | Supply, installation, Testing and commissioning of 20W LED T8 tube with extruded Al body, PC diffuser and inbuilt driver with efficacy min of 100 lumens/W along with Surface/Suspended waterproof industrial luminaire(IP 66) with polycarbonate housing and diffuser suitable for single 4 ft T8 tube etc.at the site of work.(ISI certified) |
20 | Supplying, installation, testing andcommissioningof 20W LED T8 tubelight with PC body in the existing LED box type luminaire etc. at site of work as required.(NABL certified as per ISO/IEC specification) |
21 | Supplying, installation, Testing and commissioning of 70 watt LED type Well Glass Light in pressure die-cast aluminium housing and fixing on truss /wall/pole with suitable clamps and nut bolts(ISI certified ) .. (RatingIP66,Luminare efficacy>120Lm/W,CRI>75, ). |
22 | Supplying, installation, Testing and commissioning of 40 watt LED type Well Glass Light in pressure die-cast aluminium housing and fixing on truss /wall/ pole with suitable clamps and nut bolts(NABL certified as per ISO/IEC specification) .. (RatingIP66,Luminare efficacy>120Lm/W,CRI>75, ). |
23 | Supplying, installation, Testing and commissioning of70W LED Street light fitting made up of pressure die cast alluminium housing and fixing on wall/truss/pole with suitable clamps and nut bolts including giving connection etc., at site of work as required.(ISI certified) |
24 | Removing, Checking, installation and refixing of Phillips make 36W,0.16 A,240 V Xitanium Driver in the existing 40 W LED Well glass light fitting including giving connection etc. at site of work as required. . |
25 | Supplying, installation, testing andcommissioningof 1200mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC) motor, class of insulation: B, 3 no.s blades, 30 cm long down rod, 2 no.s canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, Service value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit forspeed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230v, 50Hz, single phase AC supply, earthing etc. complete as required. |
26 | Supplying and fixing of Hot pressed moulded SMC Junction box of size 230mm x 170mm x 105mm with 6A SP MCB, 2/4 way strip connector etc. as required at the site of work. |
27 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
28 | 3 X 10 sq. mm (22mm) |
29 | Supplying and drawing of 1.5 Sq.mm,three core PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volts, conforming to IS: 694 in the existing surface/ recessed steel/ PVC conduit as required. |
30 | Providing and Making steel pole colar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required.(volume of pole/pipe not to be deducted) |
31 | Supplying of 7m high hot dip galvanized octagonal street light pole with 70 mm top dia, 130 mm bottom dia, 3mm thick and with a base plate of 200 mm x200 mm x 12 mm complete with 1 mtr hot dip galvanized single Arm bracket for fixing the street light and suitable foundation bolts etc. as required at the site of work. |
32 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. |
33 | Above 6.5 metre and upto 8.0 metre |
34 | Supplying and fixing of 32 mm dia X 2.00 metres long G.I pipe (medium class ) bracket for mounting of flurescent/ HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40mm X 3mm flat iron clamps with nuts, bolts and washer, Painter the flat iron with primer and finish paint etc. as required. |
35 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
36 | One or more coats on old work |
37 | Painting the MS/GI/Rail pole and all accesories including cleaning by rubbing with sand paper , removing dust with cotton, painting with one coat of primer and one or more coats of aluminium enamel paint and providing zebra lining (y/b) up to 1.5 mtr from ground level with proper numbering, etc. as required. |
38 | Dismantling of existing damaged Polesand shifting to depot stores etc., as required. |
39 | CREDIT ITEMS |
40 | Dismantled MS Conduit Pipes of different sizes, DB"s, GI Wire etc |
41 | Dismantled 40w box type tube light fitting |
42 | Dismantled aluminium inulated wire |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail