Tender For Construction Of 400/220Kv, 2X500 Mva Gis At Sonapur(New) With Associated Transmission Lines
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Jan 2024
0 days left
EMD
5 Crore
Bank guarantee accepted
Document Fee
50000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sonapur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 400/220Kv, 2X500 Mva Gis At Sonapur(New) With Associated Transmission Lines
BOQ
| Sl. No. | Item Description |
| 1 | Isolators and Accessories |
| 2 | 420KV, 4000A, 63kA for 3 sec, Horizontal Double Break type Isolator with double earth switch complete with manual and motor driven operating mechanisms (separate for Earth switches and Isolator) along withSupport Insulators(Polymeric type), Clamps & Connector, mounting structures, foundation nut bolts etc as required |
| 3 | 245KV, 3150A, 50kA for 3 sec, Horizontal Double Break type Isolator with double earth switch complete with manual and motor driven operating mechanisms along withSupport Insulators(Polymeric type), Clamps & Connector, mounting structures, foundation nut bolts etc as required |
| 4 | 72.5kV,2000A, 31.5kA for 3sec Horizontal Double Break type Isolator without earth switch complete with manual and motor driven operating mechanisms along withSupport Insulators(Polymeric type), Clamps & Connector, mounting structures, foundation nut bolts etc as required |
| 5 | 72.5kV,2000A, 31.5kA for 3sec Horizontal Double Break type Isolator with earth switch complete with manual and motor driven operating mechanisms along with Support Insulators(Polymeric type), Clamps & Connector, mounting structures, foundation nut bolts etc as required |
| 6 | Supply of insulator string assembly with antifog insulators and hardware fittings complete set with nuts bolts, clamps and other accessories as required, Conductors, Clamps and Connectors, BPI with Support Structures, foundation bolts, nuts and bolts as required |
| 7 | 400kV, 2x160kN double tension string Polymer/Composite insulatorsand hardwares suitable for Twin MOOSE conductors |
| 8 | 400kV, 2x120kN double Suspension string Polymer/Composite insulators and hardwares suitable for Twin MOOSE conductors |
| 9 | 220kV, 2x120kN double tension string Polymer/Composite insulatorsand hardwares suitable for Zebra conductors |
| 10 | 220kV, 2x120kN double Suspension string Polymer/Composite insulators and hardwares suitable for Twin MOOSE conductors |
| 11 | 220kV, 2x120kN double tension string Polymer/Composite insulatorsand hardwares suitable for Single HTLS Drake conductors |
| 12 | 220kV, 2x90kN double Suspension string Polymer/Composite insulators and hardwares suitable for Single HTLS Drake conductors |
| 13 | 220kV, 2x160kN double Tension string Polymer/Composite insulators and hardwares suitable for Twin MOOSE conductors |
| 14 | 4\"\" IPS Aluminium Tubular Conductors (Schedule 40) with flexi connectors, expansion joints, T- joints, end caps etc. |
| 15 | ACSR Moose Conductor as per site requirement |
| 16 | HTLS Drake Conductor as per site requirement |
| 17 | Clamps & Connectors as per requirement |
| 18 | 420KV, 1 phase Solid core bus post insulator (polymeric type) with creepage distance 31mm/kV including clamps and connectors, support structures with foundation bolts, nuts & bolts etc as required |
| 19 | 245KV, 1 phase Solid core bus post insulator (polymeric type) with creepage distance 31mm/kV including clamps and connectors, support structures with foundation bolts, nuts & bolts etc as required |
| 20 | 145KV, 1 phase Solid core bus post insulator (polymeric type) with creepage distance 31mm/kV including clamps and connectors, support structures with foundation bolts, nuts & bolts etc as required |
| 21 | 72.5KV, 1 phase Solid core bus post insulator (polymeric type) with creepage distance 31mm/kV including clamps and connectors, support structures with foundation bolts, nuts & bolts etc as required |
| 22 | Supply of Station Service Transformer (Energy efficiency level-3) and accessories as per specification. |
| 23 | 1000 KVA, 33/0.4kV StationTransformer, including Clamps & Connectors |
| 24 | 440V MCCB with Power receiving Panel as per scheme requirement (with structure, if applicable) for 1000KVA Station Service Transformer |
| 25 | Surge Arrester |
| 26 | 398kV, 20kA, LA (Polymeric type) complete with Surge Counter, leakage current meter, hardware fittings, clamps & connectors, support structures, foundation nuts and bolts as per requirements andas per specification |
| 27 | 216KV, 10kA, LA (Polymeric type)complete with Surge Counter, leakage current meter, hardware fittings, clamps & connectors,support structures, foundation nuts and bolts as per requirements andas per specification |
| 28 | 120kV, 10kA, LA (Polymeric type) complete with Surge Counter, leakage current meter, hardware fittings, clamps & connectors,support structures, foundation nuts and bolts as per requirements andas per specification(for NGR) |
| 29 | 60kV, 10kA, LA (Polymeric type) with surge Counter, leakage current meter, hardware fittings, clamps & connectors,support structures, foundation nuts and bolts as per requirements andas per specification |
| 30 | CVT and Wave Trap |
| 31 | 400kV, 8800pF, 3 Wdg CVT, complete with hardware fittings, clamps & connectors and Junction Box withpipe/Lattice support structure, foundation nuts and bolts etc as required |
| 32 | 220kV, 4400pF, 3 Wdg CVT, complete with hardware fittings, clamps & connectors and Junction Box withpipe/Latticesupport structure, foundation nuts and bolts etc as required |
| 33 | 400KV, 3150A Pedestal mounted Wave Trap with pipe/Lattice support structure, foundation nuts and bolts etc as required |
| 34 | 220KV, 1250A Pedestal Mounted Wave Trap with pipe/Lattice support structure, foundation nuts and bolts etc as required |
| 35 | Circuit Breaker |
| 36 | 145kV, 3150A, 40kA for 3 sec, Outdoor AIS Single Pole Circuit Breaker along with support structure, foundation nuts and bolts, clamp and connector and all other Accessories (for NGR of Line Reactor) |
| 37 | 72.5kV, 2000A, 40kA for 3 sec, Outdoor AIS Circuit Breaker along with support structure, foundation nuts and bolts, clamp and connector and all other Accessories |
| 38 | Bay Marshalling Kiosk alongwith support structures, foundation nuts and bolts and all other accessories |
| 39 | 400kV Bay Marshalling Kiosk |
| 40 | 220kV Bay Marshalling Kiosk |
| 41 | Instrument Transformer (CT & PT) alongwith Junction Box, Clamps and Connectors, Support Structures, foundation nuts and bolts and other accessories |
| 42 | 72.5kV, 50-25/1-1-1-1-1 (0.2S-5P20-PX-PX-PX); 1 phase current transformer for transformer tertiary bay |
| 43 | 72.5kV, Potential Transformer (3 wdg, 0.2-3P-3P) |
| 44 | Control, Relay & Protection Panel(Simplex Type) as per specification along with all accessories as required. |
| 45 | 400kV GIS |
| 46 | 400kV Bus Bar Protection Panel |
| 47 | 400kV Line CRP (Line Differential with LIU and other accessories) |
| 48 | 400kV Line CRP |
| 49 | 400/220kV ICT CRP (500MVA) |
| 50 | 400kV Bus Reactor CRP |
| 51 | 400kV Line Reactor CRP |
| 52 | 400kV Tie Breaker CRP |
| 53 | 245kV GIS |
| 54 | 245kV Bus Bar CRP |
| 55 | 245kV CRP for line feeder (Line Differential) with LIU and other Accessories for OFC |
| 56 | 400/220kV ICT CRP (500MVA) |
| 57 | 245kV Line CRP |
| 58 | 245kV Bus Coupler CRP |
| 59 | 145kV AIS |
| 60 | 145kV Single Pole CB for NGR CRP |
| 61 | 72.5kV AIS |
| 62 | Station Service Transformer CRP |
| 63 | Relevant software for relay configuration & setting, maintenance etc. |
| 64 | Relay MaintenanceTool Kit as per BID Clause of Volume II |
| 65 | Complete Substation System Automation System (As per specification ) |
| 66 | Station HMI (Main, Redundant and Metering) with Industrial PC |
| 67 | Maintenance HMI (DR Workstation) with Industrial PC |
| 68 | Gate way with PLCC and Fibre Optic Modem and Panel |
| 69 | SAS Inverter (5kVA) |
| 70 | Colour Laser Printer |
| 71 | Dot Matrix Printer |
| 72 | Line Printer |
| 73 | GPS Clock System |
| 74 | 16 port Ethernet Switch |
| 75 | All interphase equipmentfor Gateway to SLDC |
| 76 | VDU 75 inch |
| 77 | LIU |
| 78 | Aux BCU as per scheme requirement |
| 79 | All other accessories like FO armoured cables, HDPE Conduit/GI conduit Patch cords,furnitures for HMIs and printers, cables etc as per requirement |
| 80 | Station Ethernet Switch |
| 81 | SAMAST compliant ABT meters including DCU, modems,FO cables and other related accessories etc.as per specification. |
| 82 | Red Box |
| 83 | Annual Maintenance Contract (AMC) as per bid |
| 84 | 400 kV GIS Equipment |
| 85 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Line bay Module with PIR as per technical specification |
| 86 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Line bay Module without CSD/PIR as per technical specification |
| 87 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Switchable Line Reactor bay Module with CSDas per technical specification |
| 88 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Transformer bay Module with CSD as per technical specifcation |
| 89 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Tie bay Module with CSD as per technical specification. |
| 90 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Tie bay Module with PIR + CSD as per technical specification. |
| 91 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus Reactor bay Module with CSD as per technical specification |
| 92 | 3- Ø 400 kV, 4000 A, 63 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus bar Module each enclosed in bus bar enclosures running along the length of the switchgear to interconnect each of the circuit breaker bay modules in One and Half breaker configuration as per technical specification alongwith Extension module with all necessary arrangements for future extension of the GIS in One & Half Breaker Arrangement. |
| 93 | 400kV, 63kA for 3 sec, SF6 to Air Bushing along with termination module & support structure for outdoor connections to connect GIS with 400kV side of Power transformer, bus reactors, line reactors and overhead lines. |
| 94 | 400kV, 63kA for 3 sec, SF6 Gas Insulated Bus Duct (GIB) single phase from respective GIS bay module up to SF6 to Air bushings including required support structures, jointing elements and other accessories for Transformer bays, line bays, line reactor bay and bus reactor bays as per site requirement.(for both indoor and outdoor of GIS) |
| 95 | 10 Ton EOT Crane for 400kV GIS Building |
| 96 | 220 kV GIS Equipment |
| 97 | 3- Ø 220 kV, 3150 A, 50 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Line bay Module as per technical specification |
| 98 | 3- Ø 220 kV, 3150 A, 50 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - 500MVA Transformer bay Module as per technical specification |
| 99 | 3- Ø 220 kV, 3150 A, 50 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus coupler Module as per as per technical specification |
| 100 | 3- Ø 220 kV, 3150 A, 50 kA-3 sec, metal enclosed SF6 Gas Insulated Switchgear - Bus bar Moduleeach enclosed in bus bar enclosures running along the length of the switchgear to interconnect each of the circuit breaker bay modules in Double Bus Bar configuration as per technical specification alongwith Extension module with all necessary arrangements for future extension of the GIS in Double Main configuration. |
| 101 | 245kV, 50kA for 3 sec, SF6 to Air Bushing along with termination module & support structure for outdoor connections to connect GIS with 245kV side of Power transformer and overhead lines. |
| 102 | 245kV, 50kA for 3 sec, SF6 Gas Insulated Bus Duct (GIB) single phase from respective GIS bay module up to SF6 to Air bushings including required support structures, jointing elements and other accessories for Transformer bays & line bays as per site requirement. (for both indoor and outdoor of GIS) |
| 103 | 7.5 Ton EOT Crane for 220kV GIS Building |
| 104 | Supply, Testing And Maintenance Equipment of GIS as specified (each for 220kV & 400kV GIS) |
| 105 | SF6 Gas Processing, Drying, Storage & Filling Unit |
| 106 | Online Partial Discharge Monitoring Unit |
| 107 | SF6 gas quality testing unit |
| 108 | SF6 Gas Leak Detector |
| 109 | Precision Pressure Gauge |
| 110 | SF6 Gas Evacuation Plant (One mobile cart and one static cart) |
| 111 | Video Borescope |
| 112 | SF6 gas Mask |
| 113 | 500MVA, 400/220/33kV, ONAN/ ONAF/ODAF, ICT along with all accessories as below: (including terminal connectors and other acessories as per technical specification) |
| 114 | 500 MVA, 400/220/33 kV, Three phase Transformerwith OLTC |
| 115 | Oil & winding temperature monitoring system (FO based) |
| 116 | Online DGA (Multi gas) |
| 117 | Online insulating drying system |
| 118 | Maintenance free breather |
| 119 | RTCC Panel with AVR (TMS) |
| 120 | 10% Extra OIL for each transformer |
| 121 | Rail track for transformer |
| 122 | Pulling block for transformer |
| 123 | 80 MVAR Bus Reactor |
| 124 | 80 MVAR, 420KV, 3 Phase, Star with Neutral brought out, ONAN coreless Bus Reactor along with Marshalling Kiosk with accessories etc as per technical specification with 10% spare oil |
| 125 | Pulling block for Reactor |
| 126 | 63 MVAR Line Reactor |
| 127 | 63 MVAR, 420KV, 3 Phase, Star with Neutral brought out, ONAN coreless Line Reactor with NGR (with 145kV Bushing and Grounding Bushing) along with Marshalling Kiosk with accessories etc as per technical specification with 10% spare oil |
| 128 | Pulling block for Reactor |
| 129 | Battery & Battery Chargers, DCDB & ACDB as per specification |
| 130 | 220V VRLA Battery (Rating as per battery sizing calculations) |
| 131 | 220V, Dual Float Cum Boost Chargers for 220V Battery (Rating as per battery sizing calculations) |
| 132 | 220V, DCDB |
| 133 | 48V VRLA type Battery Bank (Rating as per battery sizing calculations) |
| 134 | 48V, Dual Float cum Boost Chargers for 48V Battery (Rating as per battery sizing calculations) |
| 135 | 48V, DCDB |
| 136 | Main ACDB |
| 137 | Sub ACDB |
| 138 | MLDB with 415V/415V, 250kVA isolation transformer |
| 139 | ELDB with 415V/415V, 100kVA isolation transformer |
| 140 | HVAC DB |
| 141 | MCBDB |
| 142 | Aux ACDBs, Sub DCDBs etc, as per requirement |
| 143 | Power Line Carrier Communication Equipments |
| 144 | HF armoured co-axial cable (ALONGWITH HDPE /GI CONDUIT) |
| 145 | Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 240 km) for 400kV |
| 146 | Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 150 km ) for 220kV |
| 147 | IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 240 km(400kV) |
| 148 | IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 150 km(220kV) |
| 149 | LMU and LMDU |
| 150 | EPAX system and telephone system with redundant power supply card and CPU along with E1 interface card. |
| 151 | CAT 6 armoured cable. |
| 152 | 2 wire telephone set |
| 153 | Walkie talkie handset to operate seamlessly within a radius of 1km using license free band. |
| 154 | Armoured Audio Cable |
| 155 | OPGW equipments as per specification |
| 156 | Transmission Equipment & SDH Equipment -STM 16(ADM- up to five Direction) |
| 157 | Base Equipment (Common Cards,Cross Connect/Control Cards,Optical base cards,Power supply cards,power cabling,other hardware & accessories including sub-racks,patch cords,DDF etc fully equippped with redundant Control Cards, Optical Base cards, Power Supply Cards (excluding 20.02 & 20.03 below.) |
| 158 | Optical Interface/SFP for: |
| 159 | S1.1 |
| 160 | S4.1 |
| 161 | SFP to support STM-16 upto 40km. |
| 162 | Optical Line Interface Card to support upto 250 Kms |
| 163 | Tributary Cards |
| 164 | E1 interface card (Minimum 63 interfaces per card) |
| 165 | Ethernet interfaces with minimum of 10/100/1000Mbps configurable with Layer-2switching(Minimum 8 interfaces per card) |
| 166 | 8 Port VOIP for remote locations |
| 167 | Analog Telephone( 2-wire telephone for VOIP Gateway location) |
| 168 | Termination Equipment |
| 169 | Drop and Insert Multiplexer Base Equipment (Common Cards,Cross Connect/Control Cards,Optical base cards,Power supply cards,power cabling,other hardware & accessories including sub-racks,patch cords,DDF etc fully equippped with redundant Control Cards, Optical Base cards, Power Supply Cards |
| 170 | Subscriber Line Interface |
| 171 | 2 wire (sub/sub) voice channel cards (min 8 channels per card) |
| 172 | 4wire (E&M) voice channel cards (min 8 channels per card) |
| 173 | 2 wire (Sub/Exch) voice channel cards(min 8 channel per card) |
| 174 | Asynchronous Sub-Channel Data Cards(V.24/V.28) minimum 4 channel per card with opto-coupler interface |
| 175 | Synchronous data card(N*64Kbps) |
| 176 | Tele-protection signalling equipment complying IEC 60834(16commands) and having E1/optical interface equipment |
| 177 | IEEE C37.94 for direct connection of line differential protection relays |
| 178 | Equipment Cabinets with power distribution Circuit breakers,Fan Cable Tray Cable glands entry from Top and bottom |
| 179 | For primary multiplexer,Drop/ Insert |
| 180 | For SDH equipment(including DDF patching facilities and other accessories |
| 181 | Main Distribution Frame(100 pairs) |
| 182 | Craft Terminal |
| 183 | Hardware (LAPTOP) |
| 184 | Software(Licence for 3 laptops) |
| 185 | Pre connectorized optical patch cords(Minium 8 patch cords per station) |
| 186 | 33kV, 66kV and 220kV Copper XLPE Cable and Termination Kit as per specification |
| 187 | 95 sqmm, 66kV, 1-Core, XLPE Cu cable alongwith related accessories (for Station Transformer) |
| 188 | 66kV Cable Termination Kit along with its structure, clamps and connectors and other accessories |
| 189 | 300 sqmm, 33kV, 1-Core, XLPE Cu cable alongwith related accessories (for 33kV Outgoing) |
| 190 | 33kV Cable Termination Kit along with its structure, clamps and connectors and other accessories |
| 191 | 1600 sqmm, 220kV, 1-Core, XLPE cable alongwith related accessories |
| 192 | 220kV Cable Termination Kit along with its structure, clamps and connectors and other accessories |
| 193 | Design, Manufacture and supply of Single Core Straight Through Jointing Kit including Cross Bonding with all consumables for 1600 sq mm 220KV XLPE Armoured Cu underground cable |
| 194 | Supply of three phase link boxes with SVL and 6.6 KV grade XLPE sheath bonding Copper cable suitable for 220 KV XLPE Armoured Cu under ground single core 1600 sq mm cable for earthing at cable sealing end Terminations and straight through joint with all related accessories as required. |
| 195 | Supply of Single phaselink boxes without SVL and 6.6 KV grade XLPE sheath bonding copper cable suitable for 220 KV XLPE Armoured Cu under ground single core 1600 sq mm cable for earthing at cable sealing end Terminations and straight through joint with all related accessories as required. |
| 196 | Supply of cable route marker, cable tags, cable phase identification band, jointing marker, clamp connector, trefoil clamp of nylon with neoprene gasket, warning tape, lugs, danger plate, phase plate, circuit marker ,GI Flats, Electrodes ,Earthing Materials, Trefoil Clamps for 132kV Cable etc. |
| 197 | Supply of DTS (Distributed Temperature Sensor) including DTS system for real time thermal monitoring of 220kV single core 1600 sqmm underground XLPE Cu cable |
| 198 | Supply of Galvanized steel structures for cable pot-head termination. |
| 199 | Other Cable accessories (cable trays, insert plates, MS curb angles etc) as per requirement. |
| 200 | LT Power Cable (1.1kV grade XLPE copper) |
| 201 | Armored Power Cable of various sizes as per requirement |
| 202 | Cable supports and other cable acessories |
| 203 | Others (Cable for fire fighting, illumination, CCTV, PA system etc.) |
| 204 | LT Control Cable (1.1kV grade XLPE copper) |
| 205 | Armored Control Cable of various sizes as per requirement |
| 206 | Cable supports and other cable accessories |
| 207 | Others (Cable for fire fighting, illumination, CCTV, PA system etc.) |
| 208 | Multi Modular Cable sealing system for all cable entries at 400kV & 220kV GIS building, FFPH building etc. as per requirement. |
| 209 | Earthing |
| 210 | Main earth mat conductor, GI risers, treated /Untreatedearth pit, equipment earth connections etc. |
| 211 | 40 mm DiaMS Rod for Main Earthmat |
| 212 | Earthing Conductor: 40 Mm Dia MS Rod ForRiser From The Burial Earth Mat To Equipment,Structure, Fence Etc) |
| 213 | Earthing Conductor: 75X 12 Mm GS (HDG)Flat Forequipment and structure earthing |
| 214 | Earthing Conductor: 50X10Mm GS(HDG)Flat ForRiser For Console Box,Lt Panels,Dc Panels,Marshalling Boxes, Cable Trenches Etc) |
| 215 | Earthing Device & Associated Accessories (50 Mm dia Heavy Duty GI Perforated Pipe 3 Mtrs Long ForTreated Earth Pit with CI Cover. |
| 216 | Earthing Device & Associated Accessories40Mm diaMS Rod 3 Mtrs Long For Non Treated Earth Pit with CI Cover. |
| 217 | 75X10mm, 65x12mm,65x10mm,50x8 mm, 50x6 mm and 25x6mm GI Flat as per site requirement |
| 218 | Soil Resistivity Test And Soil Treatment As And When Required |
| 219 | Separate Earthing For 400 kV GIS modules with multipoint earthing (with Cu flat of adequate size for GIS earth mat) |
| 220 | Separate Earthing For 220kV GIS Modules with multipoint earthing (with Cu flat of adequate size for GIS earth mat) |
| 221 | Separate Earthing For 400kV GIS Building with earth electrodes, Copper & GI earthing conductors etc. complete with all respects |
| 222 | Separate Earthing For 220kV GIS Building with earth electrodes, Copper & GI earthing conductors etc. complete with all respects |
| 223 | Separate Earthing For Control room building with earth electrodes, Copper & GI earthing conductors etc. complete with all respects |
| 224 | Separate Earthing For all other switchyard buildings, fencing etc. with earth electrodes, Copper & GI earthing conductors etc. complete with all respects |
| 225 | Satelite/ Auxiliary earthmat as per site requirement |
| 226 | Other Earthing Accessories( required for complete earthing of the entire switchyard and the buildings) |
| 227 | Mild Steel (Galvanised) Lattice structures for incoming and outgoing gantries etc |
| 228 | 400kV Column type \"4T1\" |
| 229 | 400kV Column type \"4T2\" |
| 230 | 400kV Beam type \"4B1\" |
| 231 | 220kV Column type \"2T1\" |
| 232 | 220kV Column type \"2T2\" |
| 233 | 220kV Column type \"2T3\" |
| 234 | 220kV Beam type \"2B1\" |
| 235 | Foundation Bolts (Including nuts,checknut & washers for lattice and pipe structures) |
| 236 | Fastners(nuts, bolts and washers) including step bolts for lattice and pipe structures |
| 237 | HVAC & VENTILATION |
| 238 | Industrial Air conditioning system for 400kV GIS building, 220kV GIS Building,Control room building,having N+1 or N+2 Standby Requirements |
| 239 | 2 TON split AC as per requirement |
| 240 | Ventilation system for 400kV GIS Building (Ventilation System with Centrifugal Fan and related Accessories should comprise of Pre and Fine air filter,Air Purifier, centrifugal fan, ducting network, air supply grilles, gravity dampers, electrical and instrumentation etc.) |
| 241 | Ventilation system for 245kV GIS Building (Ventilation System with Centrifugal Fan and related Accessories should comprise of Pre and Fine air filter,Air Purifier, centrifugal fan, ducting network, air supply grilles, gravity dampers, electrical and instrumentation etc.) |
| 242 | Fire Alarm & Detection |
| 243 | Fire Alarm & Detection system for 400kV & 245kV GIS Buildings, Control Room building including Fire Alarm panel, Multi Sensor detector, Smoke detector, manual Call point, Hooter, Response Indicators, Beam Detector, Cabling, ISOLATING MODULE etc. |
| 244 | Trolley mounted portable fire exinguishers (Dry powder chemical type) for transformers & reactors( 25 Kg , DCP Type) |
| 245 | Portable and wheel/trolley mounted Fire Extinguishers for Control Room Building and Switchyard as per specification and Portable Fire Extinguisherfor 400kV & 220kV GIS Hall each (5kg X 6 Nos and 2kg X5 Nos),Control room building (2kg X 6 Nos), Kiosk room (5kg X 3 nos. and 2kg X 3 nos.) Officer Quarter (2kg X 6Nos), Staff Quarter (2kg X 6Nos), Security Barrack (2kg X 6Nos),Guard room (Security Booth) (2kg X 3Nos), REResidence (2kg X 2Nos). Transit camp/Guest House (2kg X 6Nos), Store building (2kg X 5 nos), Open store shed (2kg X 4Nos) ( as per specification. |
| 246 | Dry powder chemical type 10 kg. For 1 MVA transformer |
| 247 | Fire fire fighting system (sprinkler system) for control room building, panel rooms etc. as per requirement |
| 248 | Hydrant & HVWS (High Velocity Water Spray) system/NIFPES including all Accessories |
| 249 | Hydrant system along with pumping arrangement & associated Civil works for fire protection system |
| 250 | HVWS system (automatic emulsifier and manual hydrant point both)for 500 MVA ICT-2 No’s, 63MVAr Line Reactor- 1 Nos. and 80MVAr Bus Reactor -2 nos. |
| 251 | NItrogen injection Fire protection and emergency service with complete accessories and related Civil and Electrical works for 500 MVA ICT-2 No’s, 63MVAr Line Reactor- 1 Nos. and 80MVAr Bus Reactor -2 nos. |
| 252 | 250 KVA, silent type DG Set with AMF including Panel & all accessories and including earthing arrangement alongwith outdoor distibution board as per scheme requirement. |
| 253 | Lighting System |
| 254 | Indoor Lighting |
| 255 | Lighting System including Lighting panel, Distribution Boards, Cabling, Conduiting, Switches, Socket, Junction boxes, auxiliary receptacle, High bay fixtures for GIS rooms |
| 256 | 420 kV GIS Building |
| 257 | 245 kV GIS Building |
| 258 | Control Room Building |
| 259 | FFPH building including reservoir, Security booth, store building, open store shed and all other Buildings etc as applicable |
| 260 | Outoor Lighting |
| 261 | Outdoor LED lighting for Switchyard, Road area, Car parking, Security outpost, open store shed, Cabling,Bore and OHT area, etc, including Lighting panel, street lighting, Switches, Distribution boards, Socket, auxiliary receptacle, complete with GI Poles etc. |
| 262 | Public Addressing System, CCTV |
| 263 | Lightning protection system (lightning masts 50 metres high, Lightning Spike, shield wire(7/4mm GI Shield wire), down conductors etc.) for complete substation including buildings. |
| 264 | Miscellaneous item(like MS Channel,Angle, Rail, Chequered plate,MS Grill plate,Switchyard and BayIdentification Name board, Anchor fastner and Display for Overall single line diagram photo with frame.etc…as per site requirement) |
| 265 | Training |
| 266 | Trainiing as per different Clauses of Volume II of BID Document |
| 267 | Additional spares required for completion of the project |
| 268 | Tenderer(s) to specify |
AI Tender Summary
Tender Timeline
Dec 27, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 24, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 25, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender