Road And Building Department-RBD has published Tender For Infrastructure Development At Khiching In Mayurbhanj District Redevelopment Of Maa Khichakeswari Temple, Khiching In Mayurbhanj District For The Year 2023-24.. Submission Date for this Tender is 10-01-2024. Infrastructure Work Tenders in rairangpur Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in all kind of soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge. |
| 2 | Extra lift of 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general. 1st Extra lift of 1.5m |
| 3 | Filling in foundation, trenches and plinth withriver sand, well watered and compacted in layers of 0.3 mtr, with top surface dressed and leveled to proper gradientincluding cost of all materials, conveyance, all taxes and royalties, loading and unloading, including cost of all labour,sundries ,T & P etc. All complete as per directions of the Engineer -in-charge. |
| 4 | Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate 40 mm nominal size ) of approved quality from quarrymixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. & including the cost of centering and shuttering all complete as per the directions of Engineer-in-charge. |
| 5 | Cast in Situ Cement Concrete M20 Kerb (Comstruction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 350 mm high in PCC M20 grade on PCC M10 grade foundation 100 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine or manually as per direction ofsite in charge with labour T & P etc all complete as per clause no 409 (Reffer MORT&H"s & NH PWD Roads 2019) |
| 6 | Filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20 cm in depth , consolidating each deposited layers by ramming and watering, lead up to 50m and lift up to 1.5 mt etc. including cost of all labour, sundries T & P etc complete in all respect as per the direction of Engineer-In-Charge. |
| 7 | Backflling with selected earth brought from borrow pits, transporting to site, spreading in layers, wateringand compacting to meet requirement as per direction of the Engineer in charge. |
| 8 | Providing Fly ash bricks masonry work using(250mmx120mmx80mm size) having crushing strengthnot less than 75Kg/Sqcm in cement mortar (1:6). Foundation & Plinth Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes& royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge . |
| 9 | Providing Fly ash bricks masonry work using(250mmx120mmx80mm size) having crushing strengthnot less than 75Kg/Sqcm in cement mortar (1:6). Super structure Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes& royalties, loading and unloading of all materials & cost of all labour, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge . Ground Floor |
| 10 | First Floor |
| 11 | Terrace Floor |
| 12 | First class Fly ash Brick masonry usingbricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:4) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super structure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
| 13 | First Floor |
| 14 | Providing and laying of Cement Concrete (1:2:4) with 12mm size B,H,C,B,Gr chips of approved quality from quarrymixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material,conveyance,royalties and taxes ,sundries ,T & P etc. but excluding the cost of centering and shuttering all complete as per the directions of Engineer-in-charge. |
| 15 | RCC work M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 % ) to be mixed in concrete mixture with approved grade cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days and finishing the exposed surface smooth providing grooves or beads wherever necessary including centering & shuttering cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect as per direction of the Engineer in charge. |
| 16 | Footing / Raft / Slab |
| 17 | Column |
| 18 | Plinth Beam |
| 19 | Column Ground Floor |
| 20 | Column First Floor |
| 21 | Column Terrace Floor |
| 22 | Roof BeamGround Floor |
| 23 | Roof BeamFirst Floor |
| 24 | Roof BeamTerrace Floor |
| 25 | Roof Slab Ground Floor |
| 26 | Roof Slab First Floor |
| 27 | Roof SlabTerrace Floor |
| 28 | Stair Case First Floor |
| 29 | Lintel Ground Floor |
| 30 | Lintel First Floor |
| 31 | Lintel Terrace Floor |
| 32 | Fin RCC Wall Ground Floor |
| 33 | Fin RCC Wall First Floor |
| 34 | Chajja Ground Floor |
| 35 | Providing, fixing in position TMT Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providinghoisting, lowering and laying including cost, conveyance and taxes oftor steel and binding wires of 18 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction ofEngineer -in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.) Foundation and plinth |
| 36 | Ground Floor |
| 37 | First Floor |
| 38 | Terrace Floor |
| 39 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Frame size 65 x 150 mm |
| 40 | First Floor |
| 41 | Providing 16mm thick cement plaster to thesurface ofbrick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge |
| 42 | First Floor |
| 43 | Terrace Floor |
| 44 | Providing 12mm thick cement plaster to thesurface ofbrick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge |
| 45 | First Floor |
| 46 | Terrace Floor |
| 47 | Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing ,sundries and T&P etc all complete as per direction of the Engineer -in-charge |
| 48 | First Floor |
| 49 | Terrace Floor |
| 50 | Providing and laying 25mm thick grading Concrete of proportion (1:2:2 ) using 6mm size crusher broken black hard granite chips from approved quarry, scrapingand cleaning the surface, fininishing smooth to proper slope and gradient including cost of all materials, cost of labour, conveyance, taxes, loading, unloading, curing,T&P, etc. all complete. |
| 51 | Wall painting two or more coats of cement paint of approved shade on new work over a coat ofto give an even shade including cost of paint. |
| 52 | Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern laid over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete in all respect conforming to IRC SP-63:2018 including cost, conveyance, taxes of all materials, T&P, labour, etc. as per direction of Engineer-in-Charge. |
| 53 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead |
| 54 | Providing, fiting and fixing of 16mm thick kota stone flooring using kota stone tile of approved quality, colour and size above 0.10 sqm in floors over an under layer of 20 mm thickcement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443/1972 including cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade,machine grinding, cleaning with oxalic acid, mirror polishing the surface including cost of all labour, materials, taxes, royalties, loading and unloading, conveyance, sundries, watering and curing,etc. complete as per the direction of the Engineer-in-Charge. |
| 55 | First Floor |
| 56 | Providing, fitting and fixing of 16mm thick finished kota stone indado/skirting using Kota stone of approved quality,colur and size over 12mm thickcement mortar (1:3) (1 cement: 3 coarse sand) confirming to IS-1443/1972 including cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade,machine grinding, cleaningwith oxalic acid, mirror polishing the surfaceincluding cost of all labour, materials, taxes, royalties, loading and unloading, conveyance, sundries, watering and curing,etc. complete as per the direction of the Engineer-in-Charge. |
| 57 | Providing & fixing of 12 mm thick muguni stone for roof cladding including supply, cutting, grinding, fixing complete as per the direction of the Engineer-in-Charge. |
| 58 | Providing & fixing of 1” thick muguni stone for flooring including supply, cutting, grinding, fixing complete as per the direction of the Engineer-in-Charge. |
| 59 | Providing & fixing of 1” thick muguni stone for ornamental pillar cladding including supply, cutting, grinding, fixing complete as per the direction of the Engineer-in-Charge. |
| 60 | Providing and fixing 32mm thick flush door shutters made out of 32mm thick BWR Block Board finished with 1mm thick laminates on bothside (Make: Merino/Equivalent, Finish-SF) including the cost of hardware fittings of make Suzu/Equvalent such as 125mm SS Ball Bearing Hinges, SS screws, Mortice lock, door closure, double round door stopper, etc. including cost of materials, labour, coveyance, taxes, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge. |
| 61 | Supplying, fitting and fixing of Unplasticised Poly Vinyl Chloride (UPVC) (Fenesta/NCL VEKA Ltd) Sliding windows -60 Series duly manufactured using UPVC reinforced profiles of 108mmx45mmx2.5mm for outer outer frames and window sash of 39mmx58mmx2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised upto 50 microns of minimum thgickness of 1.5mm prefabricated and wellded through fusion welding and the window frame shall be fitted with 6mm thick clear toughened glass of saint gobain make duly fiuxed with EPDM weathering seal resistant and the system is to be installed using reinforced large coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site, etc. including cost and conveyance of all materials, accessories, labour charges and product confirming to ASTMD 638-14,EN-477-95 and other applicable codes and standards. |
| 62 | Supplying, fitting and fixing of Unplasticised Poly Vinyl Chloride (UPVC) (Fenesta/NCL Veka ltd) Ventilator/Top hung - 60 Series duly manufactured using UPVC reinforced profiles of 60mmx55mmx2.5mm for outer frames,75mmx60mmx2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised upto 50 microns of minimum thickness of 1.5mm prefabricated and wellded through fusion welding, the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathring seal resistant accessories like clipping, locking system made up aluminium 1 No. per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site, etc. including cost and conveyance of all materials, accessories, labour charges and product confirming to ASTMD 638-14,EN-477-95 and other applicable codes and standards. |
| 63 | Supplying, fitting and fixing of G.I. grills in windows made out of G.I. square bars, angles, flats, etc painted with red oxide primer cost of all materials, labour, conveyance, taxes, loading, unloading, T&P, etc. all complete. |
| 64 | Supplying, fitting and fixing of G.I. doors/windows/grill gate made out of G.I. square bars, angle, channel, flat, plate, etc painted with red oxide primer cost of all materials, labour, conveyance, taxes, loading, unloading, T&P, etc. all complete. |
| 65 | Painting synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats on new work over a coat of suitable shade with primer of approved brand as per manufacturer"s specification including cost of all materials with taxes and transportation, all labour, scaffolding, sundries, T&P etc. All complete as per the direction of the Engineer -in-charge. |
| 66 | First Floor |
| 67 | Providing & Painting with two coats of Water Proofing Weather Coat of approved quality, make and shade on new work over one coat of priming with approved quality of wall primer to give an even surface including the cost of all materials, labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc. all complete as per the direction of Engineer-in-charge. |
| 68 | First Floor |
| 69 | Terrace Floor |
| 70 | Providing and applying 2 coats plastic emulsion paint of approved quality and shade (Nerolac / Icic / shalimar) over a coat of wall putty & primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use) |
| 71 | First Floor |
| 72 | Terrace Floor |
| 73 | Supplying, Fitting, Fixing Antiskid Vetrified Tile (600 x 600 x 10mm) of approved make confirming to IS 13755 in floors treads or steps and landing laid on 25mm thickbed of cement mortar1:4(1cement : 4sand) filling joints with white cement of approved quality including cost of all materials labour T & P etc required for the work all complete as per direction of Engineer in Charge. |
| 74 | Supplying, fitting and fixing Vitrified Tile in floors of size 600mm x 600mm (Plain/Ivory) of approved make confirming to IS:13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 Course Sand) and filling joints with white cement of approved quality including cost, conveyance, taxes, cost of all labour, labour cess, etc. as per the direction of Engineer-in-Charge. Ground Floor |
| 75 | Supplying, fitting and fixing Vitrified Tile in floors of size 600mm x 600mm (Plain/Ivory) of approved make confirming to IS:13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 Course Sand) and filling joints with white cement of approved quality including cost, conveyance, taxes, cost of all labour, labour cess, etc. as per the direction of Engineer-in-Charge. First Floor |
| 76 | Supplying, fitting and fixing of vitrified tiles (Plain/Ivory) in dados, skirting and risers of steps over 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with colouring pigments to match the colour and shade including the cost of washing, polishing, cost of materials, cost of all labour, conveyance,taxes, loading & unloading, T&P, watering and curing etc. complete. Ground Floor |
| 77 | Supplying, fitting and fixing of vitrified tiles (Plain/Ivory) in dados, skirting and risers of steps over 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with colouring pigments to match the colour and shade including the cost of washing, polishing, cost of materials, cost of all labour, conveyance,taxes, loading & unloading, T&P, watering and curing etc. complete. First Floor |
| 78 | Providing & Fixing Floor tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete. Ground Floor |
| 79 | Providing & Fixing Floor tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete. First Floor |
| 80 | Providing & Fixing GlazedTiles in Dados Skirting &Risers ofSteps of 12mm thick cement plaster (1:3)jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete. Ground Floor |
| 81 | Providing & Fixing GlazedTiles in Dados Skirting &Risers ofSteps of 12mm thick cement plaster (1:3)jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete. First Floor |
| 82 | Supplying, fitting & fixing of F.R.P door frame of size 75mm x 100 mm including drilling holes in wall including the cost of all materials, rawl plug, screws, cost of all labour, conveyance, taxes, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge. |
| 83 | Supplying, fitting, fixing of factory made single leaf rigid F.R.P composite door shutter of 32 mm thick, laminated with to G.R.P skins with wood grain finished including fitting of all fixtures like hinges, tower bolt, handle, aldrop etc. including the cost of all materials, labour, conveyance, taxes, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge. |
| 84 | Supplying ,Fitting and fixing of stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, pollishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 85 | Providing cement punning to walls including roughening, scraping and cleaning and finishing the surface smooth only to proper plumbs and level, to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing ,sundries and T&P etc all complete as per direction of the Engineer -in-charge |
| 86 | INTERIOR Providing and fixing False ceiling of 12mm thick gyp board sheets inclusive of all hangers, edge members and other clips complete, with sheets fixed with proper Philip fastner by power drills and joints duly finished ensuring level in line, completewith putty, primer and painting of approved make and colour . Cost includes cutouts for electrical fittings, materials, labour, T&P etc complete as per direction of the Engineer-in-charge. |
| 87 | Providing and fixing wooden panelling suitably fixed to the wallswith 19 mm thick WPC, plyfinished with 1 mm thick texture / suede laminatecomplete with necessary Hardwood, skirting , mouldings & teak wood beading on the edgeetc. as per the detail design including the cost of all materials, labour, overheads and T & Petc. complete. The exposed frame workshall be finished with matt finsish enamel paints / polish with mellamine to match with the shade of the Laminates. ( Basic cost of Laminate- Rs 55.48/sft ) excluding gst . |
| 88 | FULL HEIGHT STORAGE 450 width:-Providin & fixing ofFULL HEIGHT STORAGE made out of 19 mm thickbwp ply, 6 mm th bwp ply at out side & laminated with 1.0mm th sued/TEXTURElaminate on out side & 0.8 mm th laminate at in side , the exposed wooden surface polished with mellamine or painted with automotive paint with central locking, shutters with autoclosing hinges and handles. Including all cost of labour , taxes T & P etc as per the detail design & specificatio approved by EIC . (Basic cost of texture laminate is Rs 55.48/- sft ) excluding gst . |
| 89 | Providing and fixing of BED SIDE STORAGEof size 400x450x450 ht made out of 19 mm th bwp ply finshed with 1 mm th texturE. All beading to be finished with automotive paintto match the laminate as per the detail design and specifications and inclusive of all cost of labour, hardwares T&P etc complete as per the directions of the EIC/Architect.) excluding gst . |
| 90 | Providing and fixing of FREE STANDING TABLE WITH SIDECREDENZA Main Table: 1500LX 650DX 750HT SIDE STORAGE: 950W X 450D X 750HT |
| 91 | Providing & supply ing ofDr Smith Wooden Leatherate Two -Seater Sofa for Home & Office - (Black Color) *Plywood and MDF Board & Procduct dimention 162D x 81W x 76H Centimeters * IS 20D Mesh * With Head Rest * Fabric Upholstered Cushion Seat * Multilock Mechanism * One Way Adjustable Arms ( Height ) * Foam Baseincludingall cost of labour , materialhardware ,etcexcluding gstapproved by eic . |
| 92 | Providing & supply ing * Liberate Medium Mesh Back Chair * IS 20D Mesh *Fabric Upholstered Cushion Seat * Multilock Mechanism * One Way Adjustable Arms ( Height ) * Nylon Base includingall cost of labour , materialhardware ,etcexcluding gstapproved by eic . |
| 93 | Providing and supplying king size bed (1800x1950x450) mm with matress as per EIC. |
| 94 | Providing fitting and fixing of shoulder mounted Informatory Sign Board of size (1200mm x1800mm) made out of 4mm thick Aluminium Composit Panel (ACP) using upper high effiency full cube retro reflective sheeting type XI(DG-3)ASTM with blue electro cutable over lay film and 20mm thick stainless steel square pipe back support frame and 40mm NB stainless steel main frame one no of 80NB stainless steel post with top cover with screw & riverts and transportation to work site with loading and unloading and installation of the board digging 2nos 450x450x800mm foundation and trench and filling with M-15 grade concrete and compacting properly including all cost ofmaterials ,labour, conveyance, T&P & taxes as required for the work etc complete. |
| 95 | Construction of granular sub-base by providing close gradedGrading-VI material of table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density including cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc. all complete as per the clause of MoSRT&H specification for road and bridge work. |
| 96 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works (4th Revision). |
| 97 | Providing, laying and fixing of interlocking paver block of minimum 80 mm thickness and compressive strength of 300 kg/Sq.cm. laid 50mm thick sand bed including the cost of all materials, labours, conveyance, taxes, T&P, etc. complete for the work as per the direction of Engineer-in-Charge. |
| 98 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. |
| 99 | LANDSCAPING Surface dressing of the ground including removing Vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish lead upto 50m (at least 5m away from the dressed area). |
| 100 | Supplying and stacking & spading of good earth at site including royalty and carrage up to 5 KM (earth measured in stacks will be reduced by 20% for payment) 300mm thk. |
| 101 | Supplying and stacking sludge at site including royalty and carrage up to 5 KM (sludge measured in stacks will be reduced by 8% for payment) |
| 102 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation, breaking clods and fine dressing the ground including all materials and labour complete as per direction of Engineer-In-Charge. |
| 103 | Provision of soft surfaces such as grass lawns in between the open spaces |
| 104 | Providing and displaying of Araucaria cookie plant, having ht. 1.80 m to 1.95 m, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 30 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 105 | Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 106 | Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-incharge. |
| 107 | Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-incharge. |
| 108 | Providing and Displaying Ficus Long Island Topiary well developed with fresh & healthy 5 to 6 ball specific size and shape 120 to 150 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 109 | Providing and displaying of Specimen Croton Petra Bangalore variety plant, having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh & healthy foliage approximately 60-65 leaves in 30 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 110 | Providing and Displaying Golden Bottle brush Topiary well developed with fresh & healthy foliage 5 to 6 big ball 115 to 180 cm ht in 40 cm Cement Pot as per direction of the officer-incharge. |
| 111 | Providing and displaying of Seaforthia Palm plant, having ht. 1.50 m to 1.80 m with 12-15 suckers, well developed, fresh and healthy lush green leaves from bottom to top in 30 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 112 | Providing and Displaying Latania Rubra Palm well developed with fresh & healthy foliage 150 to 180 cm ht. with 6 to 7 leaves in big 35 cm Cement Pot as per direction of the officer-incharge. |
| 113 | Providing and Displaying Topiary plant of Ficus Bush King well developed with fresh & healthy foliage from Top to Bottom with single piller 60 to 75 cm spread, 210 to 225 cm ht., in 35 cm Cement Tray/Cement Pot as per direction of the officer-in-charge. |
| 114 | Providing and Displaying Topiary planted Casuarina plant fresh & healthy having 5 to 6 specific shape and size ball well developed 195 to 210 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 115 | Electricl Installation Recessed wirring tolight point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZHPVC insulated copper conductor of ISI markedMake- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed makeA catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLStype ISI markedMake-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type ( falme retradant type)switch ISI marked Make-Schneider(Zencelo)/legrand( myrious) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) ( falme retradant type) Make-Schneide/legrand/Panasonic or equievalant reputed make & model A catagory ISI marked as approvedof suitable size, modular box with 1.5 sq. Mm FRLSHPVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable. All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. GROUP-A |
| 116 | GROUP-B |
| 117 | GROUP-C |
| 118 | Group control of point in Recessed wirring tolight point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZHPVC insulated copper conductor of ISI markedMake-Make- Finolex/Anchor/Polycab/HAVELLSor equievalant reputed make A catagory ISI marked as approved as approved20 mm dia PVC flexible non metallic conduit FRLStype ISI markedMake-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approvedwith 6A modular type(( flame retradant type)) switch ISI markedMake-Schneider/legrand/Panasonic or equievalant reputed make & model A catagory ISI marked as approved,and ceiling rose ISI markedMake-Schneider)/legrand /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box withmetallic cover plate (both side) falme retradant type) Make-Schneider/legrand /Panasonicor equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. |
| 119 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( ( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider/legrand /Panasonic or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for for QUTS.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 120 | Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( flame retradant type))with suitable size modular box & cover( falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider/legrand /Panasonicor equievalant make & model ISI marked as approved , complete suitable .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 5 yearsagainst manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 121 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)( falme retradant type))with suitable size modular box & cover( falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make A catagory ISI marked as approved,(For equipement power)All the switches & sockets should be warrantied for a replacement period of 10 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 122 | Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6Aswitch & socket(modular type) ( ( falme retradant type) with suitable size modular box & metallic cover plate (both side)( falme retradant type)including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider/legrand /Panasonicr equievalant reputed make & model A catagory ISI marked as approved, (For equipement power)complete suitable forfor OFFICE.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 123 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZHinsulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, inrecessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalantISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallicheavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 124 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallicheavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5) |
| 125 | 4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallicheavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5) |
| 126 | 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallicheavy duty flexible conduit .(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOORPOINT/DG PANELESSENTIAL LOAD) (2X4+1X1.5) |
| 127 | 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallicheavy duty flexible conduit .(LFDB TO LBDB) (2X6+1X2.5) |
| 128 | Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Legrand/Schneider/Siemens/panasonic or equievalant reputed make & model A catagory ISI marked as approved,All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 129 | Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-Legrand/Siemens/Anchor/Panasonic/ Schneider or equievalant reputed make & model A catagory ISI marked as approved .All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 4 moudle(125mmx75mm) |
| 130 | 1 moudle(75mmx75mm) |
| 131 | 12 moudle(200mmx150mm) |
| 132 | Supplying and fixing of following sizes of medium class PVC FRLS conduitISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE KINJAL/ AKG/Anchor or equievalant reputed make A catagory ISI marked as approved 20 MM |
| 133 | 25 MM |
| 134 | Supply and fixingmodular type indicator on the existing switch box/cover . Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonicmake or equievalant reputed make & model A catagory ISI marked as approved as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 135 | Supply and fixingCALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model ofSchneider/Hager/Siemens/Anchor/Panasonicmake or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 136 | S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling roseas per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 137 | Supplying,fixing of Blanking plate(modular type)( flame retradant type))in existing switch box(anti bactorial & falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider/legrand /Panasonic complete suitablestandard hospital.Itshould be warrantied for a period of 5 yearsagainst manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 138 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep(Make-Equievalant higher model with 5 star ratedof Havells/almonard/Anchor/Panasonic/Usha/Halonix or equievalant reputed make & model A catagory ISI marked as approved) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years. |
| 139 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star ratedof Havells/almonard/Anchor/Panasonic/Usha /Halonix or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 5 years.. .(With fan Regulator) |
| 140 | Supplying and fixing of Energy efficient surface mounted square shape 18 W LED luminaireof dimension of 225x 225 x 35 mm consists ofwhite powder coated , die-castAlluminiumhousingwith high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not lessthan 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty)and all other accessories suitable for operationon 220 V to 240 Vsupply as required as per direction of Engg.-in-Charge. ( Make : (Make: wipro LD80-171-60-XX-SM or similar modelofLT/Trilux /Philips/Panasonic/HALONIXor equievalant reputed make & model A catagory ISI marked as approved).The luminaire should be Replacement Warranty will be 5 years |
| 141 | SITC of energy efficient LED tube light fittings with decorative alluminiumbatten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories withdiffuser having 5 years warrantyi/c connection etc as requiredas per direction of Engg.-in-Charge. ( (Make: wipro LL20-221 --or similar modelofLT/Trilux /Philips/Panasonic/HALONIXor equievalantreputed make & model A catagory ISI marked as approved.). The luminaire should be Replacement Warranty will be 5 years . |
| 142 | SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. ( Make : WIPRO Model No:LL20-111-XXX-60-NE orsimilar modelof PHILIPS/Panasonic/HALONIXor equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years |
| 143 | Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved. |
| 144 | Supply and fixing of 12 wayDD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITHCORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD,POWER LOAD ) |
| 145 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model)or equievalant reputed make & model A catagory ISI marked as approved.the existing MCB DB complete with connections as per direction of Engg.-in-Charge.The MCBshould be Replacement Warranty will be 5 years.MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5years. |
| 146 | Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Make-Equievalant highermodel ofLegrand/Snheider/Siemens / L&T/Panasonic /ABBor equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DBin the existing MCB DB complete with connections as per direction of Engg.-in-Charge.TheRCCBshould be Replacement Warranty will be 5 years |
| 147 | Supplying and fixing 40Amps DP 240 volts, RCCB,300mA Make-Equievalant highermodel ofLegrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DBin the existing MCB DB complete with connections as per direction of Engg.-in-Charge. TheRCCBshould be Replacement Warranty will be 5 years |
| 148 | S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ terminationofG.I. flat / wire withG. I. nutbolts& washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing systemshould be Replacement Warranty will be 5 years |
| 149 | Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge. |
| 150 | Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge. |
| 151 | HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 ,CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions ofsize 54mm(H) x 200mm(W),of Legrand - Cablofil make or equievalant reputed make & model A catogory, ISI marked as approved.The Load bearing capacity of the Cable Traysshould be minimum of104.8Kg/meter at the span of1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTORas required as per direction of Engg.-in-Charge. Warrentee period oftraymust be 5 years & compelete test certificate must be submitted . |
| 152 | TEMPLE OFFICE Recessed wirring tolight point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZHPVC insulated copper conductor of ISI markedMake- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed makeA catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLStype ISI markedMake-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type ( falme retradant type)switch ISI marked Make-Schneider(Zencelo)/legrand( myrious) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) ( falme retradant type) Make-Schneide/legrand/Panasonic or equievalant reputed make & model A catagory ISI marked as approvedof suitable size, modular box with 1.5 sq. Mm FRLSHPVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable. All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. GROUP-A |
| 153 | GROUP-B |
| 154 | GROUP-C |
| 155 | Group control of point in Recessed wirring tolight point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZHPVC insulated copper conductor of ISI markedMake-Make- Finolex/Anchor/Polycab/HAVELLSor equievalant reputed make A catagory ISI marked as approved as approved20 mm dia PVC flexible non metallic conduit FRLStype ISI markedMake-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approvedwith 6A modular type(( flame retradant type)) switch ISI markedMake-Schneider/legrand/Panasonic or equievalant reputed make & model A catagory ISI marked as approved,and ceiling rose ISI markedMake-Schneider)/legrand /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box withmetallic cover plate (both side) falme retradant type) Make-Schneider/legrand /Panasonicor equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. |
| 156 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( ( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider/legrand /Panasonic or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for for QUTS.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 157 | Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( flame retradant type))with suitable size modular box & cover( falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider/legrand /Panasonicor equievalant make & model ISI marked as approved , complete suitable .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 5 yearsagainst manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 158 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)( falme retradant type))with suitable size modular box & cover( falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make A catagory ISI marked as approved,(For equipement power)All the switches & sockets should be warrantied for a replacement period of 10 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 159 | Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6Aswitch & socket(modular type) ( ( falme retradant type) with suitable size modular box & metallic cover plate (both side)( falme retradant type)including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider/legrand /Panasonicr equievalant reputed make & model A catagory ISI marked as approved, (For equipement power)complete suitable forfor OFFICE.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 160 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZHinsulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, inrecessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalantISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallicheavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 161 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallicheavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5) |
| 162 | 4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallicheavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5) |
| 163 | 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallicheavy duty flexible conduit .(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOORPOINT/DG PANELESSENTIAL LOAD) (2X4+1X1.5) |
| 164 | 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallicheavy duty flexible conduit .(LFDB TO LBDB) (2X6+1X2.5) |
| 165 | Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Legrand/Schneider/Siemens/panasonic or equievalant reputed make & model A catagory ISI marked as approved,All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 166 | Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-Legrand/Siemens/Anchor/Panasonic/ Schneider or equievalant reputed make & model A catagory ISI marked as approved .All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 4 moudle(125mmx75mm) |
| 167 | 1 moudle(75mmx75mm) |
| 168 | 12 moudle(200mmx150mm) |
| 169 | Supplying and fixing of following sizes of medium class PVC FRLS conduitISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE KINJAL/ AKG/Anchor or equievalant reputed make A catagory ISI marked as approved 20 MM |
| 170 | 25 MM |
| 171 | Supply and fixingmodular type indicator on the existing switch box/cover . Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonicmake or equievalant reputed make & model A catagory ISI marked as approved as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 172 | Supply and fixingCALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model ofSchneider/Hager/Siemens/Anchor/Panasonicmake or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 173 | S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling roseas per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 174 | Supplying,fixing of Blanking plate(modular type)( flame retradant type))in existing switch box(anti bactorial & falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider/legrand /Panasonic complete suitablestandard hospital.Itshould be warrantied for a period of 5 yearsagainst manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 175 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep(Make-Equievalant higher model with 5 star ratedof Havells/almonard/Anchor/Panasonic/Usha/Halonix or equievalant reputed make & model A catagory ISI marked as approved) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years. |
| 176 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star ratedof Havells/almonard/Anchor/Panasonic/Usha /Halonix or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 5 years.. .(With fan Regulator) |
| 177 | Supplying and fixing of Energy efficient surface mounted square shape 18 W LED luminaireof dimension of 225x 225 x 35 mm consists ofwhite powder coated , die-castAlluminiumhousingwith high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not lessthan 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty)and all other accessories suitable for operationon 220 V to 240 Vsupply as required as per direction of Engg.-in-Charge. ( Make : (Make: wipro LD80-171-60-XX-SM or similar modelofLT/Trilux /Philips/Panasonic/HALONIXor equievalant reputed make & model A catagory ISI marked as approved).The luminaire should be Replacement Warranty will be 5 years |
| 178 | SITC of energy efficient LED tube light fittings with decorative alluminiumbatten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories withdiffuser having 5 years warrantyi/c connection etc as requiredas per direction of Engg.-in-Charge. ( (Make: wipro LL20-221 --or similar modelofLT/Trilux /Philips/Panasonic/HALONIXor equievalantreputed make & model A catagory ISI marked as approved.). The luminaire should be Replacement Warranty will be 5 years . |
| 179 | SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. ( Make : WIPRO Model No:LL20-111-XXX-60-NE orsimilar modelof PHILIPS/Panasonic/HALONIXor equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years |
| 180 | Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved. |
| 181 | Supply and fixing of 12 wayDD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITHCORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD,POWER LOAD ) |
| 182 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model)or equievalant reputed make & model A catagory ISI marked as approved.the existing MCB DB complete with connections as per direction of Engg.-in-Charge.The MCBshould be Replacement Warranty will be 5 years.MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5years. |
| 183 | Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Make-Equievalant highermodel ofLegrand/Snheider/Siemens / L&T/Panasonic /ABBor equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DBin the existing MCB DB complete with connections as per direction of Engg.-in-Charge.TheRCCBshould be Replacement Warranty will be 5 years |
| 184 | Supplying and fixing 40Amps DP 240 volts, RCCB,300mA Make-Equievalant highermodel ofLegrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DBin the existing MCB DB complete with connections as per direction of Engg.-in-Charge. TheRCCBshould be Replacement Warranty will be 5 years |
| 185 | S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ terminationofG.I. flat / wire withG. I. nutbolts& washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing systemshould be Replacement Warranty will be 5 years |
| 186 | Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge. |
| 187 | Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge. |
| 188 | HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 ,CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions ofsize 54mm(H) x 200mm(W),of Legrand - Cablofil make or equievalant reputed make & model A catogory, ISI marked as approved.The Load bearing capacity of the Cable Traysshould be minimum of104.8Kg/meter at the span of1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTORas required as per direction of Engg.-in-Charge. Warrentee period oftraymust be 5 years & compelete test certificate must be submitted . |
| 189 | SHOE STAND & SECURITY ROOM Recessed wirring tolight point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZHPVC insulated copper conductor of ISI markedMake- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed makeA catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLStype ISI markedMake-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type ( falme retradant type)switch ISI marked Make-Schneider(Zencelo)/legrand( myrious) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) ( falme retradant type) Make-Schneide/legrand/Panasonic or equievalant reputed make & model A catagory ISI marked as approvedof suitable size, modular box with 1.5 sq. Mm FRLSHPVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable. All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. GROUP-A |
| 190 | GROUP-B |
| 191 | GROUP-C |
| 192 | Group control of point in Recessed wirring tolight point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZHPVC insulated copper conductor of ISI markedMake-Make- Finolex/Anchor/Polycab/HAVELLSor equievalant reputed make A catagory ISI marked as approved as approved20 mm dia PVC flexible non metallic conduit FRLStype ISI markedMake-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approvedwith 6A modular type(( flame retradant type)) switch ISI markedMake-Schneider/legrand/Panasonic or equievalant reputed make & model A catagory ISI marked as approved,and ceiling rose ISI markedMake-Schneider)/legrand /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box withmetallic cover plate (both side) falme retradant type) Make-Schneider/legrand /Panasonicor equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. |
| 193 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( ( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider/legrand /Panasonic or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for for QUTS.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 194 | Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( flame retradant type))with suitable size modular box & cover( falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider/legrand /Panasonicor equievalant make & model ISI marked as approved , complete suitable .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 5 yearsagainst manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 195 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)( falme retradant type))with suitable size modular box & cover( falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make A catagory ISI marked as approved,(For equipement power)All the switches & sockets should be warrantied for a replacement period of 10 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 196 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZHinsulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, inrecessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalantISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallicheavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 197 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallicheavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5) |
| 198 | 4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallicheavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5) |
| 199 | S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling roseas per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 200 | Supplying,fixing of Blanking plate(modular type)( flame retradant type))in existing switch box(anti bactorial & falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider/legrand /Panasonic complete suitablestandard hospital.Itshould be warrantied for a period of 5 yearsagainst manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 201 | Supplying,laying of 3cx4 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials |
| 202 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep(Make-Equievalant higher model with 5 star ratedof Havells/almonard/Anchor/Panasonic/Usha/Halonix or equievalant reputed make & model A catagory ISI marked as approved) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years. |
| 203 | Supplying and fixing of Energy efficient surface mounted square shape 18 W LED luminaireof dimension of 225x 225 x 35 mm consists ofwhite powder coated , die-castAlluminiumhousingwith high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not lessthan 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty)and all other accessories suitable for operationon 220 V to 240 Vsupply as required as per direction of Engg.-in-Charge. ( Make : (Make: wipro LD80-171-60-XX-SM or similar modelofLT/Trilux /Philips/Panasonic/HALONIXor equievalant reputed make & model A catagory ISI marked as approved).The luminaire should be Replacement Warranty will be 5 years |
| 204 | SITC of energy efficient LED tube light fittings with decorative alluminiumbatten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories withdiffuser having 5 years warrantyi/c connection etc as requiredas per direction of Engg.-in-Charge. ( (Make: wipro LL20-221 --or similar modelofLT/Trilux /Philips/Panasonic/HALONIXor equievalantreputed make & model A catagory ISI marked as approved.). The luminaire should be Replacement Warranty will be 5 years . |
| 205 | SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. ( Make : WIPRO Model No:LL20-111-XXX-60-NE orsimilar modelof PHILIPS/Panasonic/HALONIXor equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years |
| 206 | Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved. |
| 207 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star ratedof Havells/almonard/Anchor/Panasonic/Usha /Halonix or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 5 years.. .(With fan Regulator) |
| 208 | Supply and fixing of 12 wayDD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITHCORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD,POWER LOAD ) |
| 209 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model)or equievalant reputed make & model A catagory ISI marked as approved.the existing MCB DB complete with connections as per direction of Engg.-in-Charge.The MCBshould be Replacement Warranty will be 5 years.MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5years. |
| 210 | Supplying and fixing 40Amps DP 240 volts, RCCB,300mA Make-Equievalant highermodel ofLegrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DBin the existing MCB DB complete with connections as per direction of Engg.-in-Charge. TheRCCBshould be Replacement Warranty will be 5 years |
| 211 | S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ terminationofG.I. flat / wire withG. I. nutbolts& washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing systemshould be Replacement Warranty will be 5 years |
| 212 | Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge. |
| 213 | Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge. |
| 214 | GUEST HOUSE Recessed wirring tolight point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZHPVC insulated copper conductor of ISI markedMake- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed makeA catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLStype ISI markedMake-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type ( falme retradant type)switch ISI marked Make-Schneider(Zencelo)/legrand( myrious) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) ( falme retradant type) Make-Schneide/legrand/Panasonic or equievalant reputed make & model A catagory ISI marked as approvedof suitable size, modular box with 1.5 sq. Mm FRLSHPVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable. All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. GROUP-A |
| 215 | GROUP-B |
| 216 | GROUP-C |
| 217 | Group control of point in Recessed wirring tolight point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZHPVC insulated copper conductor of ISI markedMake-Make- Finolex/Anchor/Polycab/HAVELLSor equievalant reputed make A catagory ISI marked as approved as approved20 mm dia PVC flexible non metallic conduit FRLStype ISI markedMake-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approvedwith 6A modular type(( flame retradant type)) switch ISI markedMake-Schneider/legrand/Panasonic or equievalant reputed make & model A catagory ISI marked as approved,and ceiling rose ISI markedMake-Schneider)/legrand /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box withmetallic cover plate (both side) falme retradant type) Make-Schneider/legrand /Panasonicor equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. |
| 218 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( ( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider/legrand /Panasonic or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for for QUTS.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 219 | Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( flame retradant type))with suitable size modular box & cover( falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider/legrand /Panasonicor equievalant make & model ISI marked as approved , complete suitable .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 5 yearsagainst manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 220 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)( falme retradant type))with suitable size modular box & cover( falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make A catagory ISI marked as approved,(For equipement power)All the switches & sockets should be warrantied for a replacement period of 10 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 221 | Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6Aswitch & socket(modular type) ( ( falme retradant type) with suitable size modular box & metallic cover plate (both side)( falme retradant type)including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider/legrand /Panasonicr equievalant reputed make & model A catagory ISI marked as approved, (For equipement power)complete suitable forfor OFFICE.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 222 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZHinsulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, inrecessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalantISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallicheavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 223 | 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallicheavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5) |
| 224 | 4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallicheavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5) |
| 225 | 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallicheavy duty flexible conduit .(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOORPOINT/DG PANELESSENTIAL LOAD) (2X4+1X1.5) |
| 226 | 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallicheavy duty flexible conduit .(LFDB TO LBDB) (2X6+1X2.5) |
| 227 | Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Legrand/Schneider/Siemens/panasonic or equievalant reputed make & model A catagory ISI marked as approved,All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 228 | Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-Legrand/Siemens/Anchor/Panasonic/ Schneider or equievalant reputed make & model A catagory ISI marked as approved .All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 4 moudle(125mmx75mm) |
| 229 | 1 moudle(75mmx75mm) |
| 230 | 12 moudle(200mmx150mm) |
| 231 | Supplying and fixing of following sizes of medium class PVC FRLS conduitISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE KINJAL/ AKG/Anchor or equievalant reputed make A catagory ISI marked as approved 20 MM |
| 232 | 25 MM |
| 233 | Supply and fixingmodular type indicator on the existing switch box/cover . Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonicmake or equievalant reputed make & model A catagory ISI marked as approved as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 234 | Supply and fixingCALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model ofSchneider/Hager/Siemens/Anchor/Panasonicmake or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 235 | S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling roseas per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 yearsagainstdefects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 236 | Supplying,fixing of Blanking plate(modular type)( flame retradant type))in existing switch box(anti bactorial & falme retradant type) including supplying of all requiredaccessoriesof ISI marked as approved as per direction of engg-in-charge..Make-Schneider/legrand /Panasonic complete suitablestandard hospital.Itshould be warrantied for a period of 5 yearsagainst manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 237 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep(Make-Equievalant higher model with 5 star ratedof Havells/almonard/Anchor/Panasonic/Usha/Halonix or equievalant reputed make & model A catagory ISI marked as approved) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years. |
| 238 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star ratedof Havells/almonard/Anchor/Panasonic/Usha /Halonix or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 5 years.. .(With fan Regulator) |
| 239 | Supplying and fixing of Energy efficient surface mounted square shape 18 W LED luminaireof dimension of 225x 225 x 35 mm consists ofwhite powder coated , die-castAlluminiumhousingwith high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not lessthan 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty)and all other accessories suitable for operationon 220 V to 240 Vsupply as required as per direction of Engg.-in-Charge. ( Make : (Make: wipro LD80-171-60-XX-SM or similar modelofLT/Trilux /Philips/Panasonic/HALONIXor equievalant reputed make & model A catagory ISI marked as approved).The luminaire should be Replacement Warranty will be 5 years |
| 240 | SITC of energy efficient LED tube light fittings with decorative alluminiumbatten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories withdiffuser having 5 years warrantyi/c connection etc as requiredas per direction of Engg.-in-Charge. ( (Make: wipro LL20-221 --or similar modelofLT/Trilux /Philips/Panasonic/HALONIXor equievalantreputed make & model A catagory ISI marked as approved.). The luminaire should be Replacement Warranty will be 5 years . |
| 241 | SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. ( Make : WIPRO Model No:LL20-111-XXX-60-NE orsimilar modelof PHILIPS/Panasonic/HALONIXor equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years |
| 242 | Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved. |
| 243 | Supply and fixing of 12 wayDD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITHCORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD,POWER LOAD ) |
| 244 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model)or equievalant reputed make & model A catagory ISI marked as approved.the existing MCB DB complete with connections as per direction of Engg.-in-Charge.The MCBshould be Replacement Warranty will be 5 years.MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5years. |
| 245 | Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Make-Equievalant highermodel ofLegrand/Snheider/Siemens / L&T/Panasonic /ABBor equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DBin the existing MCB DB complete with connections as per direction of Engg.-in-Charge.TheRCCBshould be Replacement Warranty will be 5 years |
| 246 | Supplying and fixing 40Amps DP 240 volts, RCCB,300mA Make-Equievalant highermodel ofLegrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DBin the existing MCB DB complete with connections as per direction of Engg.-in-Charge. TheRCCBshould be Replacement Warranty will be 5 years |
| 247 | S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ terminationofG.I. flat / wire withG. I. nutbolts& washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing systemshould be Replacement Warranty will be 5 years |
| 248 | Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge. |
| 249 | Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge. |
| 250 | Supplying of one number PVC insulated armoured and PVC sheathed XLPE propertyAL. conductor power cable of 1.1 KV gradePOLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge.Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials 3.5core x 70 sq mm (MAINOFP PANEL) |
| 251 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kvgrade sizeexceeding 25 SQ. MMbut not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. |
| 252 | Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge.3.5 core x70 sq mm |
| 253 | Providing,fixing and laying of fallowing dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.80 mm dia |
| 254 | Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete withfitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.100 mm dia |
| 255 | S/I/T&Commissioning of LToutdoor floor mounted cubical typedouble door electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed asG.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessoriesmust be 5 years & compelete test certificate must be submitted along with panel board including component list. |
| 256 | HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 ,CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions ofsize 54mm(H) x 200mm(W),of Legrand - Cablofil make or equievalant reputed make & model A catogory, ISI marked as approved.The Load bearing capacity of the Cable Traysshould be minimum of104.8Kg/meter at the span of1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTORas required as per direction of Engg.-in-Charge. Warrentee period oftraymust be 5 years & compelete test certificate must be submitted . |
| 257 | Supply of Elegant look 50 WAIO LED Solar Street lights having extruded alluminium housing, 120 Wp or more Mono Crystalline Panel/Laminates fixed on the top of the luminaire housing, maintenance free 12.8 volts 48 Ah or moreLiFePO4 battery(BIS certified) , BMS, MPPT charge controller, PIR sensor to provide 2 days (24 hrs ) back up . The luminaire is having IP 65 protection for critical components, IK 07 and having lumen output of > 8250 lm (>Efficacy of 165 lm/ w ) as LM 79 report of third party NABL lab . Both the luminaire and Mono Crystalline Panel must be manufactured in India. The Solar lighting company must submit the third party NABL lab reports to justify the luen efficacy,luminaire output , IK 07 and IP 65 protection ( In house NABl lab reports will not be acceptable). The completeSolar lighting system must be warrantied for a period of 5 years . The Solar lighting companies must be having toll free base service network to provide immediate after sales service through their service newtorks available in different districts of the state .The Solar lighting companies should submit the lighting design report prepared by their in house lighting design teamif required as per the direction of engineer in charge.The AIO solar street lights shall be of Anchor by Panasonic make PA050W11MLF2404 or equievalant make ISI marked as approved as per direction of Engg. in Charge. |
| 258 | Supply of 6 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel as per BS EN10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos.En 8 grade foundation bolts to withstand basicwind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkal Galvanizers/Utkarsh/Bajaj/JK / Skipper or any equivalentequievalant make ISI marked as approved as per direction of Engg. in Charge. |
| 259 | Installation of pole by making the suitable size foundation by embeding the pole 1 mtr into the ground with necessary civil work and fixing the light on the poleequievalant make ISI marked as approved as per direction of Engg. in Charge. |
| 260 | Supply ,Installation testing commissioning of 45W, High efficient LED with aluminium housing in Pure Polyster UV resistant powder coated black finish and Top maintainable product with top opening die cast cover with acrylic clear glass reflector.CRI>70, IP66, Ambient temp-0 to 45DegC, Driver efficiency>85%, CCT-4000/5700K,THD<10%,Powerfactor>0.95, Surge protection-4 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-300V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen = 3500 lumens (110 lm/W). Similar to Wipro Make LP07-431-XXX-57-CL or equivalent Philips/ LT/Trilux make. & model A catogory, ISI marked as approved, with proper model make having warrantied for a period of 5 years .The luminaire to be installed in 6 mtr long GI hot dip galvanized smart pole with anti corroson,,uv rays stabilized,metal post with covered by resinof Fumatech/Valmount/Transrail/RR/UTKASH /Utkal Galvanizer make equievalant make with proper model complete with SA bracket internal JB with 4 way connector and MCBas per the pole drawing and direction of EIC against which inspection mat take place.It should be installed after making proper size RCC foundation by considering RCC foundationby using M20 grade RCC & Fe 415 grade reinforcement and fixing the 4 nos. En 8 grade J type fdn bolts in the foundation. The luminaire needs to be wired with 3 c 1 sq mm wire from JB as per the direction of Engg-in -charge. |
| 261 | Supplying, Erection, Fixing, connection & testing of45 LED GATE Light ofWIPRO make or equvalant of Philips/LT/PANASONICor equievalant reputed make A catagoryISI marked as approved maintenance free having 2 years warrantyG.I P ipewith braket including MCB box & including with foundation as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge. |
| 262 | Supplying, Erection, Fixing, connection & testing of 8W, High efficient LED with Aluminium housing with clear toughened glass diffuser.CRI>70, IP65, CCT - 2700K, Ambient temp-0 to 45 DegC, Driver efficiency>85%,THD<25%, Powerfactor>0.95, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen = 600 lumens (75 lm/W). Similar to Wipro Make LF05 or equivalent Philips/ LT/Trilux make. as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge. |
| 263 | Supplying ,installation & fixing of 11W, High efficient LED with extruded Aluminium housing with PC diffuser.CRI>70, IP65, CCT - 6500K, Ambient temp-0 to 45DegC, Driver efficiency>80%,THD<25%, Powerfactor>0.9, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen = 565 lumens (51 lm/W). Similar to Wipro Make LB12-131-XXX-65-05 or equivalent Philips/ LT/Trilux make. including with foundation as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge. |
| 264 | Supplying ,installation & fixing of 6W, High efficient LED outdoorwith extruded Aluminium housing with PC diffuser.CRI>70, IP65, CCT - 6500K, Ambient temp-0 to 45DegC, Driver efficiency>80%,THD<25%, Powerfactor>0.9, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen = 565 lumens (51 lm/W). Similar to Wipro Make or equivalent Philips/ LT/Trilux make. including installation under water as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge. |
| 265 | Supplying ,installation & fixing of 7W, High efficient LED outdoor SPOT LIGHT with extruded Aluminium housing with PC diffuser.CRI>70, IP65, CCT - 6500K, Ambient temp-0 to 45DegC, Driver efficiency>80%,THD<25%, Powerfactor>0.9, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen = 565 lumens (10 lm/W). Similar to Wipro Make or equivalent Philips/ LT/Trilux make. including installation under water as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge. |
| 266 | Supplying ,installation & fixing of 20W, High efficient LED outdoorSPIKE with extruded Aluminium housing with PC diffuser.CRI>70, IP65, CCT - 6500K, Ambient temp-0 to 45DegC, Driver efficiency>80%,THD<25%, Powerfactor>0.9, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen 70 lm/W). Similar to Havells/WiproMake or equivalent Philips/ LT/Trilux make. including installation under water as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge. |
| 267 | SITC of IP 20 Non-integral flexible LED strip light(OUTDOOR),High optically efficient diffuser,, 3000K with 10 w/mtr @ 5Mtrpool with Driver extra as required as per direction of Engg.-in-Charge ( Make :(Make: Havells/Wipro--or similar modelofLT/Trilux /Philips/Panasonic or equievalant orsimilar modelof /PHILIPS/Wipro/HALONIX or equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years |
| 268 | Supplying, Erection, Fixing, connection & testing of80WFLOODLight ofWIPRO make or equvalant of Philips/LT/PANASONICor equievalant reputed make A catagoryISI marked as approved maintenance free having 2 years warrantywit including MCB,stainless steel braket along with driver& including with foundation as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge. |
| 269 | Supplying, Erection, Fixing, connection & testing of100WFLOODLight ofWIPRO make or equvalant of Philips/LT/PANASONICor equievalant reputed make A catagoryISI marked as approved maintenance free having 2 years warrantywit including MCB,stainless steel braket along with driver& including with foundation as per the Drawing for inspection as required & as perdirection of Engg.-in-Charge. |
| 270 | Supply of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ terminationofG.I. flat / wire withG. I. nutbolts& washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing systemshould be Replacement Warranty will be 5 years |
| 271 | Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required as per direction of Engg.-in-Charge. |
| 272 | Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. |
| 273 | Supplying and laying of one number PVC insulated armoured and PVC sheathed XLPEAL. conductor power cable of 1.1 KV gradePOLYCAB/FINOLEX/HAVELLS or equievalant reputed ISI MARKED MAKE of following size cables as per direction of Engg.-in-Charge.Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials 4core x 10 sq mm With terminetion (OFP TO IND. TIMER PANEL) |
| 274 | 4 core x 4 sq mm (for small power/LIGHT TO POLE) |
| 275 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kvgrade size not exceeding 25 SQ. MMdirect in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. |
| 276 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kvgrade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge. |
| 277 | Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials |
| 278 | Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete withfitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials 50 mm dia |
| 279 | S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type timer panel with 32A 4P MCB ,40A TP CONTACTOR ,TIMER with 6 nos 10A 4P MCB C as per direction of Engg.-in-Charge. .(Equievalant modeleach item of Legrand/Schneider/L&T/ABB or equievalant make & model)Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for 2 years after acceptance of materials. |
| 280 | Supplying, installation, testing & commissioning ofoutdoor digital signage display of park in & out with all required asper direction of Engg. In charge. |
| 281 | S/I/T&Commissioning of LT OUT DOOR type mini mast with 9 mtrs octagonal pole along with roundbraket ,8 nos 150w LED flood light ,timer panel with foundation& lightening protection system.Make-Bajaj or equievalant.Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for 2 years after acceptance of materials. |
| 282 | AIR TERMINAL & ACCESSORRIES LIGHTNING ARRESTER+ MAST:Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long, G.I tube,having single prong at top, with 85 mm dia 3 mm thick G.I base plate including holes etc complete as required with as per direction of Engg.-in-Charge.(RATE REFERING OSR 2018 SOR NO-4.2) .The entire LA systemshould be Replacement Warranty will be 5 years |
| 283 | Reveting, sweating and soldering of copper / G.I. tape ( with another copper / G.I. tape, base of the finial or any other metallic object) as required .as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.4) The entire LA systemshould be Replacement Warranty will be 5 years |
| 284 | Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) as per direction of Engg.-in-Charge.(RATE REFERING OSR 2018 SOR NO-4.7)The entire LA systemshould be Replacement Warranty will be 5 years |
| 285 | Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For virticalrun) as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.8) The entire LA systemshould be Replacement Warranty will be 5 years |
| 286 | Providing and fixing of testing joint, made of 20 mm x 3 mm thick G.I. strip, 125 long with 4 nos of G.I. bolts, check nuts and spring washer etc complete as required as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.12) The entire LA systemshould be Replacement Warranty will be 5 years |
| 287 | Providing and laying of G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required as per direction of Engg.-in-Charge. .(RATE REFERING OSR 2018 SOR NO-4.14) The entire LA systemshould be Replacement Warranty will be 5 years |
| 288 | Maintenance free Safe Earthing Electrodeswith ISI G.I. pipe dia 75mm as Secondary electrode with wall thickness of 2.6 mm and the Primary Earthing Electrode will be 50mm X 6mm X 1no M.S. hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the Primary Earthing and the secondary Earthing, the Surface Area in will be 7,06,500sqmm for 3mtrs length and Cross Sectional Primary conducting area is 300 sq.mm. An Solid G.I. Base platseals the unit at the bottom.as per direction of Engg.-in-Charge. (MES-GFC ground Filling compound will be provided in 25 kgs Bags.)(MES-GFC ground Filling compound will be provided in 25 kgs Bags.)(2 bags required for each earthing electrode.)(FOR lightening protection & Building Electrification).The entire earthing systemshould be Replacement Warranty will be 5 years.Make-OBO/Star-x/ABB or equievalant reputed make & model A catogory. |
| 289 | PUBLIC HEALTH Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778 of SDR-11, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia |
| 290 | 32 mm dia |
| 291 | 25mm dia |
| 292 | 20mm dia |
| 293 | Supplying all materials,labour,T&P & fitting and fixing of following different water supply fittings as per ASTMD-2846 with supply of all necessary jointing materials etc all complete as per direction of Engineer-in-charge. 32mm dia CPVC ball valve |
| 294 | 25mm dia CPVC ball valve |
| 295 | Supplying all labour , T&P and materials & making grooves in brick/stonewall vertically and horizontally to the required depth & width for fixing pipes & fitting in grooves , testing the pipe line against the leakage & filling the grooves with CM ( 1:4) to bring the surface to the original level including the cost of the machine , conveyance etc all complete as per the direction of Engineer-in-charge. |
| 296 | Supplying all materials labour,T&P and cutting holes through existing brickwork including supply of all materials & making good the damages for taking PVC pipes and fittings etc all complete as per PH specification and direction of the EIC 20mm to 50mm PVC to pass in 125mm to 250mm thick Brick/stone wall |
| 297 | Kitchen Sink (Nirali Elegance Large glossy (600x450x250) mm/Equivalent with drain board |
| 298 | Supplying all materials, labour, taxes, T & Pforfitting & fixingof different water supply CP , Brass or GM concealed fitting andfixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing,includingcost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge.. Angular Stop Cock With Wall Flange- Jaquar FLR- 5053N / Equivalent |
| 299 | Soap Dish Holder- JAQUAR ACN-1131N/ Equivalent |
| 300 | Soap Dispenser with Glass bottle (JaquarAKP-35735P/Equivalent) |
| 301 | CP Flanges |
| 302 | CP Grating |
| 303 | 15mm dia CP extension piece |
| 304 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm dia UPVCpipe(Type-A) |
| 305 | Supply all materials ,labour,T&P,fitting and fixing UPVC SWR Type B pipes & fittings of approved make confirming to IS-13592 including jointing of approved solvent cement non-heat application method including testing of as per standard specification ,both below & above ground level/floor & on walls including supply of bobbins,nains,screws,wooden cleats ,pipe clamps as per requirement including earthwork excavation & fitting ,including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips ,including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC (Make: ASTRAL/SUPREME/EQUIVALENT) 75mm dia UPVC SWR pipe(Type-B) |
| 306 | 110mm dia UPVC SWR pipe(Type-B) |
| 307 | 75mm dia U-PVC duble Plain Tee |
| 308 | 75mm dia U-PVC Plain bend |
| 309 | 110mm U-PVC Door bend |
| 310 | 110mm U-PVC door Tee |
| 311 | 110mm U-PVC plain Bend |
| 312 | 110mm U-PVC door Cross Tee |
| 313 | 110mm U-PVC Offset. |
| 314 | 110mm U-PVC "P" trap |
| 315 | 110mm U-PVC vent cowl with ss jali |
| 316 | 110mm pipe clip |
| 317 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, K.B brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat ofneat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge Gully trap chamber of size 250mmx250mm with R.C.C cover slab |
| 318 | Supplying all materials, labour, T&P and constructing inspection chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in chargeInspection chamber Inside size 760mmx760mmx460mm |
| 319 | supplying all material ,labour ,T&P and necessary toward laying of r.c.c NP2 hume pipe push-on joint including cost R.C.C hume pipe push on type rubber gasket laying in proper slope &gradient lowering the pipe to trench with required plastic rope without damage to the pipe & fitting with selected excavated material after laying the pipe complete etc.includingcost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge. 150 mm dia. R.C.C. pipe |
| 320 | Supplying all materials, labour, T&P and fixing PVCwater storage tanks of 2000 ltr capacity (shade white) confirming to IS:12701-1996 including cutting holes through the tank and fixing pvc pipe and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including conveyance of all materials to worksite etc all complete as per specification and direction of Engineer-in-charge. 2000 ltr capacity water storage tanks-1 Nos |
| 321 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Cooler-cum-Purifier of size (700x430x460mm ht) with water cooling capacity of 40 PPH with contineously flow with one faucet having option for cold water and normal water etc.with internal water supply connection complete as per direction of the Engineer-in-charge. |
| 322 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778 of SDR-11, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia |
| 323 | 32 mm dia |
| 324 | 25mm dia |
| 325 | 20mm dia |
| 326 | Supplying all materials,labour,T&P & fitting and fixing of following different water supply fittings as per ASTMD-2846 with supply of all necessary jointing materials etc all complete as per direction of Engineer-in-charge. 40mm dia CPVC ball valve |
| 327 | 32mm dia CPVC ball valve |
| 328 | 25mm dia CPVC ball valve |
| 329 | Supplying all labour , T&P and materials & making grooves in brick/stonewall vertically and horizontally to the required depth & width for fixing pipes & fitting in grooves , testing the pipe line against the leakage & filling the grooves with CM ( 1:4) to bring the surface to the original level including the cost of the machine , conveyance etc all complete as per the direction of Engineer-in-charge. |
| 330 | Supplying all materials labour,T&P and cutting holes through existing brickwork including supply of all materials & making good the damages for taking PVC pipes and fittings etc all complete as per PH specification and direction of the EIC 20mm to 50mm PVC to pass in 125mm to 250mm thick Brick/stone wall |
| 331 | Supplying all materials , labour T&P and cutting hole in RCC floors,roofs,etcfor passing PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the EIC 20mm to 50mm PVC to pass in 125mm to 250mm thk RCC |
| 332 | Providing & Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. MAKE :- HINDWARE/ JAQUAR/ PARRYWARE/ Equivalent. Water Closet Complete set - HINDWARE -20100+21054/ Equivalent |
| 333 | Providing and fixing of following size Wash Basin with 175mm Long Wall Connection Pipe includingpainting of fittings and brackets, cutting and making good the walls wherever requiredwith provision for pillar cock but excluding the cost of pillar cock, including all cost of labour, material, conveyance, loading, unloading, T&P etc. all complete as per the direction of Engineer-in-charge. MAKE :- HINDWARE/ JAQUAR/ PARRYWARE/ Equivalent. Wash hand basin with porcelain pedestal(Hindware)-91049 |
| 334 | Supplying all materials, labour, taxes, T & Pforfitting & fixingof different water supply CP , Brass or GM concealed fitting andfixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing,includingcost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge.. 2 Way Bib Cock With Wall Flange(Plaza/Aquatic/Amber) |
| 335 | Pillar Cock with lift type operating knob & Base Flange- (Plaza/Aquatic/Amber) |
| 336 | Angular Stop Cock With Wall Flange- (Plaza/Aquatic/Amber) |
| 337 | Towel Rail 600mm Long,- |
| 338 | Towel Ring- |
| 339 | Soap Dish Holder- |
| 340 | Health Faucet(Plaza/Aquatic/Amber) |
| 341 | Glass Shelf |
| 342 | CP Flanges |
| 343 | CP Grating |
| 344 | 15mm dia CP extension piece |
| 345 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm dia UPVCpipe(Type-A) |
| 346 | Supply all materials ,labour,T&P,fitting and fixing UPVC SWR Type B pipes & fittings of approved make confirming to IS-13592 including jointing of approved solvent cement non-heat application method including testing of as per standard specification ,both below & above ground level/floor & on walls including supply of bobbins,nains,screws,wooden cleats ,pipe clamps as per requirement including earthwork excavation & fitting ,including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips ,including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC (Make: ASTRAL/SUPREME/EQUIVALENT) 110mm dia UPVC SWR pipe(Type-B) |
| 347 | 110mm U-PVC Door bend |
| 348 | 110mm U-PVC door Tee |
| 349 | 110mm U-PVC plain Bend |
| 350 | 110mm U-PVC door Cross Tee |
| 351 | 110mm U-PVC Offset. |
| 352 | 110mm U-PVC "P" trap |
| 353 | 110mm U-PVC vent cowl |
| 354 | 110mm pipe clip |
| 355 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, K.B brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat ofneat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge Gully trap chamber of size 250mmx250mm with R.C.C cover slab |
| 356 | Supplying all materials, labour, T&P and constructing inspection chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inspection chamber Inside size 760mmx760mmx460mm |
| 357 | Supplying all materials, labour, T&P and fixing PVCwater storage tanks of 2000 ltr capacity (shade white) confirming to IS:12701-1996 including cutting holes through the tank and fixing pvc pipe and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including conveyance of all materials to worksite etc all complete as per specification and direction of Engineer-in-charge. 2000 ltr capacity water storage tanks-1 Nos with stagging all complete as per specification and direction of Engineer-in-charge. |
| 358 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778 of SDR-11, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia |
| 359 | 32 mm dia |
| 360 | 25mm dia |
| 361 | 20mm dia |
| 362 | Supplying all materials,labour,T&P & fitting and fixing of following different water supply fittings as per ASTMD-2846 with supply of all necessary jointing materials etc all complete as per direction of Engineer-in-charge. 40mm dia CPVC ball valve |
| 363 | 32mm dia CPVC ball valve |
| 364 | 25mm dia CPVC ball valve |
| 365 | Supplying all labour , T&P and materials & making grooves in brick/stonewall vertically and horizontally to the required depth & width for fixing pipes & fitting in grooves , testing the pipe line against the leakage & filling the grooves with CM ( 1:4) to bring the surface to the original level including the cost of the machine , conveyance etc all complete as per the direction of Engineer-in-charge. |
| 366 | Supplying all materials labour,T&P and cutting holes through existing brickwork including supply of all materials & making good the damages for taking PVC pipes and fittings etc all complete as per PH specification and direction of the EIC 20mm to 50mm PVC to pass in 125mm to 250mm thick Brick/stone wall |
| 367 | Supplying all materials , labour T&P and cutting hole in RCC floors,roofs,etcfor passing PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the EIC 20mm to 50mm PVC to pass in 125mm to 250mm thk RCC |
| 368 | Providing & Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. MAKE :- HINDWARE/ JAQUAR/ PARRYWARE/ Equivalent. Water Closet Complete set - HINDWARE -20100+21054/ Equivalent |
| 369 | Providing and fixing of following size Wash Basin with 175mm Long Wall Connection Pipe includingpainting of fittings and brackets, cutting and making good the walls wherever requiredwith provision for pillar cock but excluding the cost of pillar cock, including all cost of labour, material, conveyance, loading, unloading, T&P etc. all complete as per the direction of Engineer-in-charge. MAKE :- HINDWARE/ JAQUAR/ PARRYWARE/ Equivalent. Wash hand basin with porcelain pedestal(Hindware)-91049 |
| 370 | Supplying all materials, labour, taxes, T & Pforfitting & fixingof different water supply CP , Brass or GM concealed fitting andfixtures of ISI approved make of following sizes and specification with leak proof threaded joints tightened with spun yam and white zinc or any other method as required and directed including testing and rectification of defects after testing,includingcost of all labours, materials, conveyance, loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge.. 2 Way Bib Cock With Wall Flange- ( Jaquar FLR-5041N/ Equivalent |
| 371 | Pillar Cock with lift type operating knob & Base Flange- (Jaquar FLR-5015/ Equivalent |
| 372 | Angular Stop Cock With Wall Flange- Jaquar FLR- 5053N / Equivalent |
| 373 | Towel Rail 600mm Long,- ACN-1111SM/ Equivalent |
| 374 | Towel Ring- ACN-1121BN/ Equivalent |
| 375 | Soap Dish Holder- JAQUAR ACN-1131N/ Equivalent |
| 376 | Soap Dispenser with Glass bottle (JaquarAKP-35735P/Equivalent) |
| 377 | Toilet Roll Holder with stainless steel flap (Jaquar AKP-CHR-35753PS/Equivalent) |
| 378 | Health Faucet(JAQUARALD-573 /Equivalent) |
| 379 | Glass Shelf ( Jaquar cat no-AKP-35771P/Equivalent) |
| 380 | CP Flanges |
| 381 | CP Grating |
| 382 | 15mm dia CP extension piece |
| 383 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm dia UPVCpipe(Type-A) |
| 384 | Supply all materials ,labour,T&P,fitting and fixing UPVC SWR Type B pipes & fittings of approved make confirming to IS-13592 including jointing of approved solvent cement non-heat application method including testing of as per standard specification ,both below & above ground level/floor & on walls including supply of bobbins,nains,screws,wooden cleats ,pipe clamps as per requirement including earthwork excavation & fitting ,including cutting walls & floor & making good the damages with cement concrete (1:2:4) with hard granite chips ,including scaffolding wherever necessary all complete with requisite testing as per direction of the EIC (Make: ASTRAL/SUPREME/EQUIVALENT) 110mm dia UPVC SWR pipe(Type-B) |
| 385 | 110mm U-PVC Door bend |
| 386 | 110mm U-PVC door Tee |
| 387 | 110mm U-PVC plain Bend |
| 388 | 110mm U-PVC door Cross Tee |
| 389 | 110mm U-PVC Offset. |
| 390 | 110mm U-PVC "P" trap |
| 391 | 110mm U-PVC vent cowl with ss jali |
| 392 | 110mm pipe clip |
| 393 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, K.B brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat ofneat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge Gully trap chamber of size 250mmx250mm with R.C.C cover slab |
| 394 | Supplying all materials, labour, T&P and constructing inspection chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inspection chamber Inside size 760mmx760mmx460mm |
| 395 | Supplying all materials, labour, T&P and fixing PVCwater storage tanks of 1000 ltr capacity (shade white) confirming to IS:12701-1996 including cutting holes through the tank and fixing pvc pipe and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including conveyance of all materials to worksite etc all complete as per specification and direction of Engineer-in-charge 1000 ltr capacity water storage tanks-1 Nos with stagging all complete as per specification and direction of Engineer-in-charge. |
| 396 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of theEngineer-in-Charge. |
| 397 | - do - with addl. Depth of 1.5 m |
| 398 | Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge In ground floor |
| 399 | Supplying all materials, labour, T&P andproviding cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. In ground floor |
| 400 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge In ground floor |
| 401 | Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 402 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge For Roof slab |
| 403 | For RCC wall |
| 404 | Supplying all materials, labour, T&P and providing M.Sreinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 405 | Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 406 | Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in charge |
| 407 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls ofman hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 408 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
| 409 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778 of SDR-11, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia |
| 410 | 20mm dia for Stand post |
| 411 | Providing, laying & jointing in positionPVC pipe conforming to ISI standard and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers" instruction,PVC pipe 63mm-6 kg/cm2 |
| 412 | PVC pipe 50mm-6 kg/cm2 |
| 413 | PVC pipe 40mm-6 kg/cm2 |
| 414 | Earthworkexcavationand refilling 300x450mm |
| 415 | Providing & fixing of PS- Ultra, Pop up spray headbodies,having features an encased plastic "cage" to provide unmatched resistance to grit,with high efficiency ADJUSTABLE nozzle capable of covering 1.2M -5.2m at 1.0 - 2.1 Bars, pressur. Additionally Two-piece ratchet mechanism, Features is Precision controlled flush at pop-down clears debris from unit, Construction of time-proven UV_resitant plastic. |
| 416 | Providing & Fixing of SJ- 512, 1/2" Pop up Connecting Four Elbow Swing joint Assembly.The fittings shall be made of UV resistant thermo plastic. |
| 417 | Providing and fixing ofPP service saddle ofvarying size.1/2" |
| 418 | Providing & fixing of IsolationValvein mainlinefor bypass and flow diversion of approved quality 63 MM |
| 419 | Providing and fixing of Isolation Ball Valve,security pivot to maintain lever in space,double water tight joint,direct injection stem non mechanical ,with a base which permits maximum penetration into the valve of size 63mm. |
| 420 | Providing & fixing of a double acting 1"Air release valve,The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 5 bar. Including service saddle and riser assembly. |
| 421 | Providing & fixing of 12" Rectangular Valve Box withgreenlid and corrugated structure with unique shovelaccess slot and bolt hole knockout |
| 422 | Providing & fixing of 6"Roundbox withgreenlid and corrugated structure with unique shovelaccess slot and bolt hole knockout |
| 423 | Providing & fixing of Brass Quickcoupling valve made up ofsolidbrass with locking covercorrosion resistant and stainless steel spring.Including service saddle and riser assembly. |
| 424 | Providing & fixing of Brass Key threads into top of QCV to provide water access And Brass Swivel Elbow |
| 425 | Providing & Fixing ofVFD pumpset of having discharge of 3.56 lps@ 52 to 55 mtrheadwith NRV, control valve, control panel mounted on a common base skid with required size of pressure vessel etc complete. |
| 426 | Providing & Fixing ofGI Suction ,Delivery & Header Pipe |
| 427 | Providing & fixing ofButterfly Valvein mainlinefor bypass and flow diversion of approved quality |
| 428 | Providing and fixing of Pressure Release Valve |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
