Military Engineer Services-MES has published Tender For Special Repairs To Mes Installation (Ac-20) P-153, (Mag No.1), P-293 (Ac Plant Room), P-294 (Addl/Alt To Pump House), P-295 (Addl/Alt To Pump House), P-296 (Lg Set Room) & Mes Pump House No. 01 At Mil Stn Suranussi Under Age (I) Suranussi. Submission Date for this Tender is 25-01-2024. Pump House Construction Tenders in jalandhar Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-Jan-2024 | Corrigendum No 2 | BOQ | 18-01-2024 |
| 2 | 10-Jan-2024 | Corrigendum No 1 | Date | 18-01-2024 |
| 3 | 18-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-01-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar , including all quoins arces etc |
| 2 | Demolition of cement conc in ground floor and pavings not exceeding 15 cm thick above or below ground level. |
| 3 | Taking down cement or cement lime plaster of any description from walls, including racking out joints hacking for key scrubbing down with water etc , complete all as specified. |
| 4 | Taking down chowkats or frames with Shutters(without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site. |
| 5 | Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of areaexc 1.50 Sqm but n.exc 4.00 Sqm each and removing from site. |
| 6 | Taking shutter only of any desription of size exc 1 sqm and n.exc 2sqm |
| 7 | Taking shutter only of any desriptionbut refixing in the same opening |
| 8 | M&L brick work , with sub class "B" bricks built in cement mortar 1:6 straight or curved on plan exc 6mtr mean radius with old size bricks complete all as specified. |
| 9 | Ditto all as per item No above but except brick work complete all as specified. |
| 10 | M&L for 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified. |
| 11 | M&L for 15mm thick cement plastering in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified. |
| 12 | M&l for 5 mm th rendering in cement mortar in 1:3 on ceiling complete all as specified and as directed |
| 13 | Dismantling floor, hearth or wall tilling incl cement mortar bedding (but not backing), remvoving serviceable tiles to storeand rubbis off the premises complete all as specified and directed. |
| 14 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry and pointed in eitherwhite or coloured cement to match , over 15 mm th screed or bedding layer in CM 1:6 complete all as specified |
| 15 | M&L for glazedceramictiles coloured of size 450mmx350mm x 7mm th on vertical surfaces such as in skirting, dado etc over 10 mm th backing coat in cm 1:4 complete all as specified. |
| 16 | M&L 18-20 mm th machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, over 20 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge. |
| 17 | All as per item No 114 above but as in skirting over 10mm th rendering in CM 1:4 complete all as specified and directed by Engineer-in Charge. |
| 18 | M&L PCC 40 mmth 1:2:4 type B-0using 12.5 mm graded stone agg as in levelling course. |
| 19 | M&L 75 mm th cement conctype C-2,1:3:6 as in plinth protection with using 40 mm graded stone aggregate complete all as specified. |
| 20 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified. |
| 21 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) complete all as specified. |
| 22 | Supply & Fixingsteel windows 1.25 mm thick box type (primer coated) ERW hollow "P" section of size 60mm x 25mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1mm thick and openable leaf consisting two nos sash bar of T section 20x3mm complete welded to frame including cutting holes and making good dismanteled portion in cement concrete (1:2:4) type B-I four nos for each window including following fitting welded to shutter complete all as specified and as directed by Engineer-in-Charge :- (i) Hold fast 150mm long 12 mm x 3mm made to shape - 04 Nos each window. (ii)Handle of Z Section 20 x 25 mm, 100mm long 01 Nos each leaf. (iii) MS tower bolt 150 mm long-02 Nos each leaf. (iv) Z Section 20 x 25mm, 100 mm stopper - 01 Nos per leaf (v) Cleat 55 mm long of hollow square 15x20x63mm welded to hinges - 01 Nos per leaf. (vi) MS Box type hinges of size 75 X 12 mm - 02 Nos per leaf. (vii)MS Guard bars square 12mm dia @10 cm c/c with GI frame fixed to window frame. (viii)Fabrication and fixing Note :- Glass and Wire gauge shall be measured and paid for separately. |
| 23 | All as per item No 14 above butwith Gauged shutter. |
| 24 | S&F 3mm th sheet glass ordinary quality glazing with oil putty in square n.exc0 .5sqm in each pane |
| 25 | S&Fgalvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm complete all as specified. |
| 26 | S & F mild steel butt hinges cold rolled of size 100mm medium weight. |
| 27 | S & F for 6 mm thick 600x450mmbevelled edged mirror of selected quality glassmounted on AC boardfixed to wooden plug with chromium plated screws screedbed in cm (1:6) complete all as specified |
| 28 | S&F in repairs vitreous china urinals,flat back of size 465mmX355mmX 265mm, white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed. |
| 29 | S& F vitrious china wash hand basin flat back550X400mmincl fixing bracket, pvc waste coupling and waste pipe,cp pillar tap etc all as specified and directed by engineer-in-charge. |
| 30 | S&F in repair vitreous china squatting pan ‘Orissa patten’ size 580x440mm white with intergral foot rest (excluding flushing cistern and flush pipe)with "P" or "S" trap including water connection to trap and flushing pipe, flushing cistern etc incl lime concrete bedding and PCC 1:2:4 for making good the floor fixed in repair complete all as specified |
| 31 | S&F in repair pvc connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by engineer-in-charge. |
| 32 | S&F in repair 15mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by engineer-in-charge. |
| 33 | S&F in repair 15mm size Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by engineer-in-charge. |
| 34 | S&F in repair 20mm size stop valves PTMT high pressure screwed for iron pipe |
| 35 | S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified |
| 36 | S&F in Repair PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed by engineer-in-charge. |
| 37 | Taking up/ down GI tubing and connections with all fittings 15 mm bore |
| 38 | Ditto all as per item No above but 20mm bore |
| 39 | S&F15 mm dia GI tubing , medium grade,and connections fixed to wall or ceiling,laid in floor etc complete all as specified and as directed by engineer-in-charge. |
| 40 | S&F20 mmdia GI tubingand connections fixed to wall or ceiling,laid in floor etc complete all as specified and as directed by engineer-in-charge. |
| 41 | S&F in repairCP shower rose 15mm sizefixed to iron pipe |
| 42 | S&F in repair towel rail 600mm long of PTMT incl cp brass srews etc |
| 43 | S&F in repair PVC SWR pipe 110 mm dia single socketed in any length with rubber ring joints fixed to walls etc all as specified |
| 44 | Ditto all as per item No 90 above but laid in trenches |
| 45 | Ditto all as per item No90 above but 75mm dia |
| 46 | Ditto all as per item No 92above but laid in trenches |
| 47 | S&F in repair 75mm size PVC (SWR) floor trap plain with grating incl to jointing with waste pipe with adhessive etc all as specified |
| 48 | S&F 110 mm dia PVC SWR type bends any radius complete all as specified |
| 49 | Ditto all as per item No 87 above but 75mm dia etc all as specified |
| 50 | S&f 100 mm dia stack clampmade out of25x4mmFlat iron etc all as specified |
| 51 | S&f 75mm dia stack clampmade out of25x4mmFlat iron etc all as specified |
| 52 | Dismantling water tanks of any description exc 250 and n.exc 500 ltr capacity and removing to store complete all as specified and as directed by engineer-in-charge. |
| 53 | Dismantling water tanks of any description exc 500 and n.exc 1000 ltr capacity and removing to store complete all as specified and as directed by engineer-in-charge. |
| 54 | S&Fin repairsRotational moulded polythene water storage tanksdouble layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier /Polycon complete all as specified and as directed |
| 55 | S&Fin repairsRotational moulded polythene water storage tanksdouble layer (cylinder each vertical with closed top) of capacity 1000 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier /Polycon complete all as specified and as directed |
| 56 | M&L Preparing new surfacesof steel and applying two coats of SE paint,complete all as specified and as directed. |
| 57 | .-ditto- all as per item No 32 above but on old surface |
| 58 | M&L preparing surfaces old of wood and applying two coats of SE paint over a coat of pink primer complete all as specified. |
| 59 | M&L for three coats of white wash on newly plastered surface incl preparation of surface complete all as specified and directed. |
| 60 | M&L preparing surfaces of new walls and applying two coats of oil bound distemper over a coat of primer complete all as specified. |
| 61 | M&L preparing surfaces of old walls and applying one coats oil bound distemper. |
| 62 | M&L for preparation of new plastered surfaces of any description not otherwise description not otherwise described and applying two coats of cement base painting camouflaging pattern over a coat of primer on walls including preparation and cleaning the old surface etc complete all as specified and directed |
| 63 | M&L for preparation of old plastered surfaces of any description not otherwise description not otherwise described and applying two coats of cement base painting camouflaging pattern on walls including preparation and cleaning the old surface etc complete all as specified and directed |
| 64 | Dismantling boarding any description fixed in any position with nails complete all as specified and directed |
| 65 | M&L for 12mm th perforated particle board/tiles for insulation and accoustic purpose 60X60CM in size fixedin frame work /grid complete all as specified and as directed |
| 66 | M&L 605mmX605mmsize anodised Aluminium snap grid frame work for false ceiling with aluminium angle 25X25X1.5mm th and Tee 25X35mmX1.5mm th and using 2mm GI wire adjustable as suspender in required length complete all as specified and as directed. Make: -Armstrong |
| 67 | M&L for 35 mm thick 2nd clas hard wood,factory madePlain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated as specified in SSR Part I section 8 clause 8.2(a) complete all as specified and as directed |
| 68 | M&L for 35mm thIInd class Hard Woodglazed /gauged shutters open rebated and prepared to receive glass /gauge etc without sash bars edges of framing plain or chamferedrounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.2(a) including helical Door spring complete all as specified and as directed |
| 69 | S&F solid PVC door frame of sie 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed |
| 70 | S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on eitherside& as gap insertfor top rail & bottom rail . Panellingof plain of plain colurPVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings complete all as specified and as directed |
| 71 | S&F 25 mm th flush shutter solid core constructionwith block board core and plywood face panels commercial face on both faces complete all as specified and as directed |
| 72 | Dismantling brick tile or terracing tile single layer on roof complete all as specified and as directed by engineer-in-charge. |
| 73 | Demolition of mud in roofs any thickness including plastering and leeping (weather full thickness removed or part there of) complete all as specified and as directed by engineer-in-charge. |
| 74 | Demolition of cement Concreteof any description and in any position not otherwise specifically provided forcomplete all as specified and as directed by engineer-in-charge. |
| 75 | M&L for 75 mmaverage consolidated thickness pcc 1:3:6 type C2 withusing 20mm graded stone aggregate as in padding on flat roofs etc all as specified and directed. |
| 76 | Supply only Integral water proofing compound complete all as specified and as directed by engineer-in-charge. |
| 77 | M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of1.2 kg per sqm over a coat of primer including cleaning surfaces complete all as specified and as directed by engineer-in-charge. |
| 78 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application complete all as specified and as directed by engineer-in-charge. |
| 79 | M&L for 40mm thick brick tiles laid on cement mortar bed ( 1:3) with WPC and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement and pointed in CM (1:3)complete all as specified and as directed by engineer-in-charge. |
| 80 | All as per itemNo 57above but except brick tiles |
| 81 | M & LTMT bars 8 mm dia and overdia cut to length bent to shape required including cranking, bendingand binding with and including ms wire (annealed) n. less than 0.9mm dia or securing with clips incl tack weldingall as specified |
| 82 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified. |
| 83 | M & L for Reinforced cement concrete (nominal mix) type B-0 1:2:4 using 12.5 mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc at a height of 10 mtrs from GL using NITO BOND EP as per manufacturer"s instructions. (Note : NITO BOND EP will be measured and paid separately) |
| 84 | M&L Providing, cement concrete type B2 (1:2:4) (using 20 mm aggregate), asin roof kerbs or mud stops, rounded or chamfered on edges parapets copings, bed plates, etc |
| 85 | Cutting groovesof size 75mm wide and 65mm deep in brick parapet wall for inserting APP membrane and making good the disturbed portion in CM (1:3) |
| 86 | M & L 75 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in PCC Floor and pavingcomplete all as specified and directed by Engr - in - Charge. |
| 87 | M&L 25 mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in–Charge. |
| 88 | M & L Machine pressed precast conc. interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and with pigment complete all as specified and directed by Engr - in - Charge. |
| 89 | M & L Cement concrete 1:2:4 type B–1 using 20mm graded stone aggregates incopings,, including weathering, slightly rounded or chamfered angles and throating, as directed all as specified and directed by Engineer - in - Charge . |
| 90 | S & F 1.25 mm thick of laths Steel rolling shutters, but gear operated type with chain wheel and hand chainas specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type |
| 91 | Taking down carefully copper/ aluminium point wiring (light/ fan/bell/ socket or power point) complete inclusive of all fittings such as switches, ceiling roses, pendants, regulators, sockets, fittings etc. removing materials from site and making good disturbed surfaces of floors/walls/ceiling etc complete all as directed. |
| 92 | Material and Labour for Concealed point wiring complete with 1.5 Sq.mm (nominal area) FR PVCinsulated multi stranded copper conductor in and including heavy duty PVC conduit (wall thickness 1.6 mm) including fittings & accessories, with MS concealed terminal boxes with 3mm thick laminated bakelite ( Hylum/Anchor) sheet top cover for mounting switch, socket etc for one light/fan/bell point controlled by one switch and regulator with PVC cable copper conductor including 1.5 Sqmm solid copper conductor with green FR PVC insulation earth common earth dolly, complete all as specified. |
| 93 | All as per ser item No. 92 abovebut for 3 pin socket out let 5 Amps on same board complete all as specified and directed. |
| 94 | All as per ser item No. 92 abovebut for 3 pin socket out let 5 Amps on independent boardcomplete all as specified and directed. |
| 95 | Supply and fixing switch piano flush type 5 Amp single pole one way complete all as specified and directed. |
| 96 | Supply and fixing socket outlet 5 pin 5 Amps flush type multi purpose complete all as specified and directed. |
| 97 | M&L for point wiring with 2.5 Sq mm single core multi-stranded copper conductor PVC (FRLS) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including metal flush mounting box (sunk in wall) for suitable of moduleswith 3 mm thick plastic laminated sheet top cover with 2.5 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board. |
| 98 | Supply and fixing switch piano flush type 15 Amp single pole one way complete all as specified and directed. |
| 99 | Supply and fixing Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed. |
| 100 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete |
| 101 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 102 | Supply and fixing ceiling rose surface bakelite 65 x 50mmthree terminals completeall as specified and directed. |
| 103 | Supply and Fixingfan regulator electronic step type and making connectionall as specified and directed. |
| 104 | Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor. |
| 105 | Supply and fixing exhaust fan 300 mm sweep 1200 RPM,heavy duty,AC single phase 230/240 volts,metal body with louver shutters including making circular hole in existing wall to accommodate exhaust fan and necessary civil work and making good the disturbed surface complete all as specified and directed. |
| 106 | Supply and fixing sheet steel enclosure with double door, detachable gland plates flush/surface mounting for MCB’s fitted with bus bar, earth bar and neutral link 4 ways SPN 240 V all as specified and directed. |
| 107 | Supply and fixing sheet steel enclosure with double door, detachable gland plates flush/surface mounting for MCB’s fitted with bus bar, earth bar and neutral link 8 ways SPN 240 V all as specified and directed. |
| 108 | Supply and fixingMCBSPN 240V,40 Ampall as specified and directed. |
| 109 | Supply and fixing MCB SP 6 to 32 Amps 240 Voltsall as specified and directed. |
| 110 | M&L for Lamp holder PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 111 | S&F informatory name board of size 1200 mm x 900 mm made of aluminium sheet 2 mm thick with stainless steel rectangular frame using 25 x 15 mm rectangualr pipe with 35 mm dia stainless pipe inouter border all around retro reflective high intensity 400 micron thick blue colour sheet pasted with heating process on both sides of the board including 75 mm to 100 mm high white colour letters cut to shape with special plotter and in proper manner indicating Pump house/ Sub station No/Name and Location of installation as directed by Engr in Charge, 02 Nos 75 mm dia stainless steel pipes of 304 grade glossy finish with MS plate 3 mm thick welded at bottom of pipes shall be provided.The board shall be fixed at height of 3.00 m (Top level of board) above GL and shall be embedded in ground using PCC 1:2:4 type B-1 of min size 300 mm x 300 mm x 600 mm including necessary form work, excavation and earth work complete all as specified and directed. |
| 112 | Material and Labour for earthing with galvanized iron earth plate electrode 600mm x 600mm, 6mm thick buried directly in ground vertically in a earth pit not less than 2.25mtr below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level connected to GI earth wire 4mm dia by means of GI bolts, nuts, check nuts and washers (earth plate covered with alternate layers of charcoal dust and common salt 15cm thick), GI earth wire protected by GI pipe light grade 15 mm dia upto switch board and connected to main switch board including provision of GI pipe 20 mm dia light grade watering pipe with funnel and wire mesh, all as shown in Electrical Plate No. 3 of SSR Part-I, including PCC chamber (1:3:6) using 20mm graded stone aggregate and CI cover and frame including all necessary excavation and earth work and taking out old earthing complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
