Public Works Department-PWD has published Tender For Repair And Renovation Of Stair Wall Cladding Of G Plus 7 Building At Nsati, Block Fc, Sector Iii, Salt Lake, Kolkata 700106 During The Year 2023-2024. Submission Date for this Tender is 11-01-2024. Civil Work Tenders in bidhannagar West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof. Gr. Floor |
| 2 | 1st Floor |
| 3 | 2nd Floor |
| 4 | 3rd Floor |
| 5 | 4th Floor |
| 6 | 5th Floor |
| 7 | 6th Floor |
| 8 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer"s specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (A) Deep Colour & WhiteGr. Floor |
| 9 | 1st Floor |
| 10 | 2nd Floor |
| 11 | 3rd Floor |
| 12 | 4th Floor |
| 13 | 5th Floor |
| 14 | 6th Floor |
| 15 | Supplying, fitting and fixing 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200mmX 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 940 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc. complete in all respect with requisite accessories like end profile, transition profile, reducer "T" profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of Laminate Floor Accessories only (Skirting,End edge, T- moulding,Reducer )shall have to be added separately, wherever required. ln Ground FIoor: Category: High Footfall ; Class- 23;Abrasion resistance:-AC4 Thk on Swelling:- < 15% ;Impact resistance:- IC 2 |
| 16 | Supplying Laminate Floor Accessories (Skirting, End edge, Tmoulding, Reducer ) to 8mm thick Laminated wooden Flooring Work conforming to EN13329:2006 with plank size not Iess than 1200mmX 190 mm (with unilin/tongue-groove locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 840 kg/m3 substrate core over a rasin saturated backing layer and installing through unilin or tongue- groove system (having locking strength not less than 1000 kg/m) over a 2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc. complete in all respect as per direction & satisfaction of Engineer in charge. Cost of labour charge for fitting & fixing of Laminate Floor Accessories only (Skirting,End edge, T- moulding,Reducer)shall have to be added separately, wherever required. - ln Ground FIoor: Catagory: Normal/High Footfall |
| 17 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] - In Ground Floor (i) 4mm - 1st Floor |
| 18 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging wherenecessary.(i) With 1:6 cement mortar(b) 20 mm thick plasterGr. Floor |
| 19 | 1st Floor |
| 20 | 2nd Floor |
| 21 | 3rd Floor |
| 22 | 4th Floor |
| 23 | 5th Floor |
| 24 | 6th Floor |
| 25 | Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor. - (b) Slab Thickness above 25 mm and upto 37.5 mm 1st Floor |
| 26 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(i) Single Socketed 3 Meter Length(b) 110 mm |
| 27 | (A) v) Double Socketed 1.2 Meter Length(b) 110 mm |
| 28 | (B) Fittings(iii) Door Tee -(b) 110 mm |
| 29 | iv) Door Tee(LH) & (RH) -(b) 110 mm |
| 30 | x) Bend 87.5º -(b) 110 mm |
| 31 | xv) Vent Cowl -(b) 110 mm |
| 32 | xvi) Pipe Clip -(b) 110 mm |
| 33 | xxi) 110 X 110 P Trap - 75 mm |
| 34 | C) Rubber Lubricant 500 ML |
| 35 | D) Solvent Cement 250 ML |
| 36 | Labour for fitting and fixing U.P.V.C. pipes for above ground work incl cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the EIC. (A) Above ground - (ii) 110 mm dia. |
| 37 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, incl cutting pipes, fitting, fixing etc. complete in all respect incl cost of all necy fittings as required,jointing materials in any position above ground. b) For Concealed Work - (i) CPVC Pipes Class-1,SDR-11 - 20 mm dia |
| 38 | (b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) |
| 39 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer"s specification and as per direction of the EIC. (In Ground Floor) (a) One Coat - i) Water based interior grade Acrylic Primer |
| 40 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) ii) Luxury Quality |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
