}

Replacement Of Bare Conductor By Insulated Covered Conductor (Aaac) In 11 Kv Alliance Feeder Emanating From 33/11 Kv S/S Navodaya Under Edd-Ii, Rudrapur, rudrapur-Uttarakhand

Uttarakhand Power Corporation Limited-UPCL has published Replacement Of Bare Conductor By Insulated Covered Conductor (Aaac) In 11 Kv Alliance Feeder Emanating From 33/11 Kv S/S Navodaya Under Edd-Ii, Rudrapur. Submission Date for this Tender is 11-01-2024. Electrical Maintenance Tenders in rudrapur Uttarakhand. Bidders can get complete Tender details and download the document.




Tender Notice

41289824
Replacement Of Bare Conductor By Insulated Covered Conductor (Aaac) In 11 Kv Alliance Feeder Emanating From 33/11 Kv S/S Navodaya Under Edd-Ii, Rudrapur
Open Tender
Indian
Uttarakhand
rudrapur
11-01-2024

Tender Details

Replacement Of Bare Conductor By Insulated Covered Conductor ( Aaac ) In 11 Kv Alliance Feeder Emanating From 33 / 11 Kv S / S Navodaya Under Edd-Ii, Rudrapur

Key Value

Document Fees
INR 5900 /-
EMD
INR 200000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Replacement of bare conductor by Insulated Covered Conductor (AAAC) in 11 KV Alliance Feeder emanating from 33/11 KV S/s Navodaya under EDD-II, Rudrapur under the head of Capital (S.I.). ( Rates Quoted without GST) (GST will paid extra)
Sl. No. Item Description
1Annexure-A (LABOUR CHARGES)
2Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel ,bracing and special type bracket etc. as per RESPO schedule and local approced drawing.
3Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including prop er dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work.
4Erection of SP-33 single support pole in proper level and alignment along with fixing of all accessories like top channel,& clamps a s per RESPO manual.
5Erection of SP-55 single support pole in proper level and alignment along with fixing of all accessories like top channel,& clamps a s per RESPO manual.
6Grouting of pole in size 0.45x4.45x1/9 of the support in CC ration 1:4:8(1 cement:4 graded stone20 mm niminal size: 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, levelling as per RESPO cnstruction manual.
7Muffing of poles size 0.45x0.60 cm radius with 1:3:6(1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement,stone and sand etc.
8Dismantling of existing HT line. including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(ACSR Weasel).
9Painting of SP-55 pole with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of aluminium Paint and two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level.
10Route cleareance by cutting of tree branches / proning, loping and chopping of trees for L.T., 11 & 33 KV line.
11Cartage of ST pole SP-33 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 0-20 Km).
12Cartage of ST pole SP-55 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 0-20 Km).
13Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 0-20 Km).
14Headload cartage of SP-33 Pole from road to site(distance 0-1 Km).
15Headload cartage of SP-55 Pole from road to site(distance 1-3 Km).
16Head load cartage of small material(distance 0-1 Km).
17STRAIGHTNING OF TILTED EXISTING LT POLE.
18Fixing of 33 KV Suspension Ties.
19Fixing of IPC with AL. Bail for Earthing.
20Jumpering of D/P TPMO, Fuse Set and T/F.
21OPENING OF 11 KV JUMPER& MAKING AGAIN OF SECTION POLE
22Fixing of 11 KV 90 KN Tension Clamp with Bail and IPC
23Fixing of 11 KV IPC for CC to CC Conductor.
24Fixing of 11 KV IPC for CC to Bare Conductor.
25Fixing of 11 KV Mid Span Jointing Kit.
26Laying Spreading, Stringing AAAC Conductor.
27Back Carriage of Scrap Material.
28Annexure-B (SUPPLY ITEMS)
29Supply of Holding clamp for SP-55 Pole with N/B
30Supply of 33 KV Suspension Ties on Every Pin Insulator
31Supply of IPC with alluminium bail for earthing
32Supply of 11 KV IPC for covered to covered conductor
33Supply of 11 KV IPC for covered to bare conductor
34Supply of 11 KV mid span Jointing Kit
35Supply of 11 KV AAAC Covered Conductor AL-59, 99 Sq.mm.
36Supply of 11 KV Tension Clamp with Bail & IPC
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail