Grama Panchayat has published Tender For Muthuvalloor Gp - Supply Of Materials For Kitchen Work. Submission Date for this Tender is 01-01-2024. Construction Material Tenders in Malappuram Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Stone for Masonry work |
2 | Portland Cement |
3 | Coarse sand (Zone III) |
4 | Laterite stone of size 35 X 20 X 20 cm |
5 | Structural steel such as tees, angles, channels and R.S joists |
6 | Red oxide zinc chromate primer |
7 | Adjustable telescopic prop 3 m (2.02 - 3.75 cm) |
8 | Beam clamb 300-380 mm (450 - 1070 mm) |
9 | Second class kail wood in planks |
10 | Second class kail wood in scanting |
11 | Hollock ballies 125 mm diameter |
12 | Adjustable Span ESO+SI (2.35 - 3.40) |
13 | Stone Aggregate (single size) : 20 mm nominal size |
14 | Stone Aggregate (single size) : 10 mm nominal size |
15 | Hire charges of concrete Mixer 0.25 to 0.40 cum with Hopper |
16 | Vibrator (Needle type 40 mm) |
17 | Twisted steel / deformed bars |
18 | Stone Aggregate (Single Size) : 40 mm nominal size |
19 | Fine sand (Zone IV) |
20 | Water thinnable cement primer for interior wall surface, having VOC Content less than 50 gms / litre |
21 | Ceramic Glazed TilesFirst Quality 300 X 300 mm in all shades designs Except White, Ivory, Fume Red brown etc |
22 | Ceramic Glazed TilesFirst Quality min thickness 5 mm in all colurs shades anddesigns Except burgundy, bottle green black etc |
23 | Vitreous China flat back wash basin630 X 450 mm |
24 | 15 mm C .P brass tap |
25 | C.P brass waste 32 mm |
26 | CI bracket for washbasin and sinks |
27 | Stainless steel kitchen sink - without drain board 470 X 420 mm bowl depth 178 mm |
28 | Mild steel sheets for tanks |
29 | Iron pintels including welded pin |
30 | Mild steel sheet with bolt and nuts to rest on pintels |
31 | Mild steel hooks |
32 | Anjili wood Scants |
33 | Bright finished or black enameled mild steel butt hinges 100 X 58 X 1.90 mm |
34 | Bright finished or black enameled mild steel butt hinges 50 X 37 X 1.50 mm |
35 | Bright finished or black enameled mild steel screw 40 mm |
36 | Bright finished or black enameled mild steel screw 20 mm |
37 | Float glass sheet of nominal tickness 4 mm (weigth not less than 10 kg/sqm) |
38 | Mild steel Round bar above 12 mm dia |
39 | Flats up to 10 mm in thickness |
40 | Multi surface paint |
41 | Special Primer (C.W) |
42 | 35 mm thick factory made solid panel PVC door shutter of single piece exruded profile non decorative finished (Matt finished) |
43 | Powder coated M.S butt hinges 100 mm X 58 mm X 1.9 mm |
44 | PVC Pipe 25 mm outer dia 12 kgf/cm2 |
45 | PVC Pipe 20 mm outer dia 10 kgf/cm2 |
46 | PVC Pipe 110 mm outer dia 6 kgf/cm2 |
47 | Brass Mortice latch and lock 100 X 65 mm with 6 levers and a pair of brass lever handles |
48 | Polythene water storage tank with cover and suitable locking Arrangement |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail