Bhakra Beas Management Board-BBMB has published Tender For Providing Community Type Toilets In Anmol Kalia Park At Nangal Township. Submission Date for this Tender is 04-03-2024. Toilet Bathroom Tenders in nangal Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-Jan-2024 | Corrigendum 1 | Date | 31-01-2024 |
| 2 | 01-Feb-2024 | Corrigendum 2 | Date | 08-02-2024 |
| 3 | 09-Feb-2024 | Corrigendum III | Date | 21-02-2024 |
| 4 | 22-Feb-2024 | Corrigendum 3 | Date | 04-03-2024 |
| Sl. No. | Item Description |
| 1 | PART-A (CIVIL WORK) |
| 2 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. (CSR Item No. 6.6) |
| 3 | Cement concrete 1:6:12 (b) With stone aggregate 40mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type (CSR Item No. 10.8 b (ii)) |
| 4 | First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth. (CSR Item No. 11.3 (i)) |
| 5 | Damp proof course 4 cm thick of CC 1: 2: 4 with two coats of bitumen 20/30 penetration @ 1.65 kg per sqm laid hot and sanded. (CSR Item No. 10.26) |
| 6 | First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. (CSR Item No. 11.4 (i)) |
| 7 | 115mm thick brick wall cement sand mortar 1:4 without reinforcemant in super structure. (CSR Item No. 11.36) |
| 8 | Bearing plasterearing Plaster of 10 mm thick cement morta1:3 cement sand finished with a floating coat of neat cement and thick coat of Lime wash / P.O.P. on top of walls when dry for bearing of R.C.C. slabs & beams. (CSR Item No. 15.52) |
| 9 | Centring & shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels (CSR Item No. 9.6) |
| 10 | Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. (CSR Item No. 9.8) |
| 11 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. (CSR Item No. 10.20) |
| 12 | Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete (CSR Item No. 18.18) |
| 13 | Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing (CSR Item No. 13.13(i)) |
| 14 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. (CSR Item No. 13.55) |
| 15 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16 (CSR Item No. 13.45) |
| 16 | Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4.00 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item) (CSR Item No. 13.74) |
| 17 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. a) UPVC 110 mm bend (CSR Item No. 13.75(A)) |
| 18 | Plastering on underside of ceiling 10 mm thick cement plaster 1:4 (CSR Item No. 15.44) |
| 19 | 12.5 mm thick cement plaster 1:6 (CSR Item No. 15.11) |
| 20 | Base course of floor consisting of 100mm thick cemen concrete 1:8:16 and with stone aggregate 40mm gauge and 100mm sand filling using mechanical mixer for mixing of material (CSR Item No. 14.3) |
| 21 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. (CSR Item No. 14.72) |
| 22 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 X 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (CSR Item No. 14.128) |
| 23 | Cement Concrete 1:2:4 with stone ballast or shingle mixing by machanical means using concrete mixer volumetric type. (CSR Item No. 10.13 (a) (ii)) |
| 24 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections conforming to Is:733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/ neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P.brass /stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and panelling to be paid for separately) a) For fixed portion and chaukhats (CSR Item No. 17.45 (a)) |
| 25 | b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required (CSR Item No. 17.45 (b)) |
| 26 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic items) ii) Float glass panes of 5mm thickness (CSR Item No. 17.47(i)) |
| 27 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc.complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. (CSR Item No. 17.46 (ii)) |
| 28 | Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete (B) 250mm x 16mm (CSR Item No. 17.49-B) |
| 29 | Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) (ii) For shutter area above 0.50 sqm (CSR Item No. 17.23 (ii)) |
| 30 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish (CSR Item No. 16.65) |
| 31 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats) (CSR Item No. 16.63) |
| 32 | Kota stone slab 20-25 mm thick flooring over 20mm (average) thick base laid over and jointedwith grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) (CSR Item No. 14.84) |
| 33 | Providing and laying 50 mm thick factory made cement concrete interlocking Paving blocks of M35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-inCharge. (CSR Item No. 14.136) |
| 34 | PART-B (WATTER SUPPLY ITEMS) |
| 35 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. (B) Single Socket Type B (a) 110mm o/d SWR UPVC pipe lines laid complete (CSR Item No. 30.74 (iii) B (b)) |
| 36 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. (B) Single Socket Type B (b) 90 mm o/d SWR UPVC pipe lines laid complete (CSR Item No. 30.74 (iii)B (c)) |
| 37 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. (B) Single Socket Type B ( C) 160 mm o/d SWR UPVC pipe lines laid complete (CSR Item No. 30.74 (iii) B (a)) |
| 38 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. for 110 mm o/d pipe (i) vent Cowls (CSR Item No. 30.81 (iii) B (vi)) |
| 39 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. iii) Elbow 90 Degree (All side socketed) (CSR Item No. 30.81 (iii) B (v)) |
| 40 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. iv ) P Trap/Floor Trap 110mm x 75mm (CSR Item No. 30.81 (iii) B (x)) |
| 41 | Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge ) (a) 110mm o/d (CSR Item No. 30.77 (C) (b)) |
| 42 | Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge ) (b) 160mm o/d (CSR Item No. 30.77 (C) (a)) |
| 43 | Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge ) (c ) 90mm o/d (CSR Item No. 30.77 (C) (c)) |
| 44 | Providing and fixing in position M.S. or heavy flat iron clamps made out of M.S. flat iron of the approved design for fixing SWR UPVC, vent or antisyphonage pipes to walls complete in all respect. Including cutting and making good the walls and floors etc. and painting.(a) M.S. holder bats clamps for 110 mm o/d SWR UPVC pipes (MR) |
| 45 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300 mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. (b) 100mm internal Diametre H.C.I. gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm (CSR Item No. 30.99 (b)) |
| 46 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I. pipes line and making good the same to its original condition. a) Size 75mmx75mm (CSR Item No. 30.85 (a)) |
| 47 | Providing, laying, jointing , fixing and testing ISI marked G.I. pipe (as per IS 1239) B-class premium make such (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) painting with anti-corrosive bitumastic paint, testing, cutting, threading inside building complete . (a) 15 mm i/d (CSR Item No. 28.35 (a)) |
| 48 | Providing, laying, jointing, fixing & testing ISI marked G.I. pipe (as per IS 1239) B-Class premium make such as (Jindal, Hisar) including cost of specials (such as tees, bends, sockets, elbow etc.) cutting, threading and testingin trenches in the ground complete b) 15mm i/d (CSR Item No. 28.36 (a)) |
| 49 | Providing and fixing in position Chinaware in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in -Incharge)consisting of 10 ltr. PVC flushjing cistern ISI marked PVC short bend 32mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in- charge. (CSR Item No. 30.4) |
| 50 | Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. (CSR Item No. 30.2) |
| 51 | Providing and placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer-in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank. i) Triple layer Tanks (CSR Item No. 30.97-A (i)) |
| 52 | Providing and fixing in position automatic brass ball cock in tanks. b) Brass Ball cock with rod and Plastic i) 15 mm i/d (CSR Item No. 30.96 (b) (i)) |
| 53 | Providing & fixing 15mm i/dia bib cock of approved make to the approval of the EIC complete in all respect. iv) Brass bib cock/stop cock 15 mmx400grm (CSR Item No. 30.65 A (iv)) |
| 54 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. Ii) C.P. brass Bib cock foam flow without flange (CSR Item No. 30.65-A (ii)) |
| 55 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. B) C.P.brass 15mm Concealed stop cock with flange (CSR Item No. 30.66 ( b )) |
| 56 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. C) C.P.brass 15mm Angle valve without flange (CSR Item No. 30.66 ( C)) |
| 57 | Providing and placing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC water storage tanks complete in all respect. a) G.I. tank nipple 15mm i/d (CSR Item No. 30.98 (a)) |
| 58 | Providing and fixing PVC waste pipe 32mm collapriable complete in all respect. (CSR Item No. 30.20) |
| 59 | Providing and fixing jet spray with 2"-6" long PVC pipe With C.P. Brass nut (CSR Item No. 30.8 (a)) |
| 60 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. ii) Size 550mmx400mmx815mm (CSR Item No. 30.32 (ii)) |
| 61 | Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. i) Vitreous chinaware standard white pedestal for wash hand basin. (CSR Item No. 30.43(i)) |
| 62 | Providing, fixing and jointing G.I. Union couplings (of approval make with the approval EIC) as per IS 1879 in G.I. pipe lines complete in all respect. a) 15 mm i/d G.I Union (CSR Item No. 28.40 (a)) |
| 63 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. a) Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal (CSR Item No. 29.60 (a)) |
| 64 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. b) Size 450mm x 600mm inside with RCC 455mm x 610mm cover and frame light duty double seal (CSR Item No. 29.60 (b) ) |
| 65 | Providing and fixing in position PVC flexible tube connection of approved make ( to the approval of Engineer-in-charge) complete in all resprct. ( b) PVC tube connection of size 15mmx450mm with C.P. Brass nut. (CSR Item No. 30.72 (b)) |
| 66 | Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete. (CSR Item No. 30.16) |
| 67 | Providing and fixing partition for different type of urinals. ii) 19 to 20 mm thick Granite stone partition size 375mm x 750mm (CSR Item No. 30.21 A (ii)) |
| 68 | Dismantling of Flexible Pavements (By Mechanical Means) (a) Dismantling of flexible pavements thickness above 50mm by mechanical means and disposal of bdismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately as per technical clause 202 of MORT&H specifications (CSR Item No. 24.3(a)) |
| 69 | Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation ,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. andremoval of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. a) Earth work upto 1.5 m. Depth for ii) For Ordinary soil having gravel upto 40% (CSR Item No. 28.2 (a) (ii)) |
| 70 | Cement concrete 1:5:10 (b)With stone aggregate 40mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type (Csr 10.9 (b) (ii)) (CSR Item No. 10.9 (b) (ii)) |
| 71 | ELECTRICAL ITEMS |
| 72 | RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100 watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- (i)Wiring light point (CSR Item No. 34.04 (ii)) |
| 73 | PVC INSULATED SINGLE CORE FRLS COPPER CONDUCTOR CABLE:- Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- (iii) Overall size 2.5 sq.mm (Un-sheathed) (CSR Item No. 34.09 (iii)) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
