Tender For Construction/Retrofitting Of Pipe Water Supply Scheme At Panas, Tal.Jaoli, Dist- Satara
Tender Value
37 Lakhs
Estimated cost
Bid Submission
29 Dec 2023
0 days left
EMD
37002
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jaoli → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction/Retrofitting Of Pipe Water Supply Scheme At Panas, Tal.Jaoli, Dist- Satara
BOQ
| Sl. No. | Item Description |
| 1 | Supply well |
| 2 | Item No.1 - Desilting the SupplyWell, Intake Well / Head Works, Sump of water supply / sewerage works etc. in wet or dry condition including lifts upto 9 M and lead upto 150 M as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge |
| 3 | Lift 7.50 to 9.00 M |
| 4 | Item No: 3- Excavation in general in Hardmaterials comprising of ofsoft Rock, Hard Rock, Manjara Rock etc. by blasting in wet or dry condition for Head work i.e. intake well supplying welletc. for lift of 1.50 M. and lead 150 M including barricading guarding dispoing off surplus excavated stuff excluding refilling as directed etc. |
| 5 | Lift 9.00 to 10.50 MMJP DSR 2021-22P/I-45/10b+ 10 % |
| 6 | Lift 10.50 to 12.00 M. MJP DSR 2021-22P/I-45/10b+ 10 % |
| 7 | Item No: 4- Providingand laying insitu cement concrete of grade ( M-150 ) 1:2:4 of trap/ granite /quartizite/geniss metal for foundation and bedding including dewatering formwork compacting and curing etc. |
| 8 | M-150 |
| 9 | Item No: 5- Providing& casting in situ R.C.C.M-200 of trap/ granite/quartizite/geniss metal for approved quality for R.C.C. work as per detailed drawing and designs or as directed by Engineer in charge including normal dewatering formwork compaction finishing the formed surface with C.M. 1:3 of sufficient thickness if special finish is to be provided & curing etc. |
| 10 | A) R.C.C.Beam M-300 MJP DSR 2021-22 |
| 11 | B) R.C.C.Vertical Wall M-300 MJP DSR 2021-22 |
| 12 | Item No: 6- Providing & fixing in Position Tor / Mild steel bar reinforcement of various diameter for R.C.C. piles caps footings foundation slabs beams coloumns canopies stairacases newels chajjas lintels paradis coping fins arches etc.as per detailed drawing and schedules including cutting bending hooking the bars binding with wires or tackwelding and suporting as required etc. ( including cost of binding wires ) |
| 13 | Tor Steel |
| 14 | Item No: 7- Providing Structural steel work in in single stanchions composed of R.S.J. Channels etc. with caps bases mild steelplates angles brackets cleats gusset plates anchor bolts etc. as per detailed design and draing or as directed including cutting fabricating hoisting erecting fixing in position making riveted/bolted/welded connections and one coat of anticorrosive paint and over it 2 coats of oils painting etc. |
| 15 | Item No: 8- Dewatering the excavated trenches and pools of water in well area by using pump and other devoces including disposing off water to distance etc |
| 16 | Item No: 9- Providing and fixing in position CI dapuri steps or 22 mm dia M.S. bar step with proper Anchorage etc. & providing and applying 3 coats of anticorrosive paintetc. |
| 17 | Item No: 10-Providing and fixing 80 mm dia A.C./PVC pipe weep holes at 1.5 M c/c staggered including cost of all materials and labour involved with all leads and lifts etc. with all leads and lifts |
| 18 | Item No: 11- Refilling the trenches with available excavated stuff with soft materials first over pipeline & then hard materials in 15 cm laters with all leads and lifts including consolidation surcharging etc. |
| 19 | Sub work-Pump House |
| 20 | Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. |
| 21 | Lift of 0 to 1.5 M |
| 22 | Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distace of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc complete. |
| 23 | Lift of 0 to 1.5 M |
| 24 | Providing and laying in situ Cement concrete M-15of trap or granite or quartzite or gneiss metal for foundation and bedding includingdewatering, form work, compacting,roughening them if special finish is to be provided, finishing if required and curing etcetera complete. |
| 25 | PCC M-150 |
| 26 | Providing and laying in situ Cement concrete of trap/granite/quartzite/ gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc, complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L & T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) Excluding M. S. orTor Reinforcement |
| 27 | RCC Footing M-200 |
| 28 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 29 | Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted ) |
| 30 | RCC Column M-200 |
| 31 | Providing and casting in situ C. C. of trap / granite / quartzite/ gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C. M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever nesessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) |
| 32 | RCC beam & lintel M-200 |
| 33 | Providing and casting in situ C. C. of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and desingns or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use ofL&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted .) |
| 34 | Slab M-200 |
| 35 | Providing and casting in situ C. C. of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use fo L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted .) Excluding M S or Tor reinforcement. |
| 36 | Chajja M-200 |
| 37 | Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar of following proportion superstructure including striking out & racking out joint watering and scafolding etc complete. |
| 38 | Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation ,slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hookingthe bars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire) |
| 39 | Tor Steel |
| 40 | Providing and laying Rough shahabad stone flooring upto 40 mm. thick and of required width in plain / diamond pattern on a bed of bed 1:6 cement mortar including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete. |
| 41 | Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete |
| 42 | Providing sand faced plasterexternally in cement motar using approved screened sand, in all positions including base coat of 15 mm. thick in cement mortar 1:4 using waterproofing compound at 1 Kg. per cement bag, curing the same fornot less than 2 days and keeping the surface of the base coat rough to recive the sand faced tretment 6 to8 mm. thick in cement mortar 1:4 finishingthe surface by taking out grains and curing for foureen days scaffolding etc. complete. |
| 43 | Providing and applying colour-wash of approved colour and shade in one coat to new surface including scaffolding, brushing and brooming down (excluding base coats of white wash) etc.complete. |
| 44 | Provinding and applying washable oil-bound distemper of approved colour and shade to old and new surface in two coats including scaffolding preparing the surfaces (excluding the primer coat) etc. complete. |
| 45 | roviding and fixing steel frame of angle 50 x 50 x 6 mm size for window with 16 mm with mild steel bars horizontally at 10 cm c/c for ventilator portion and at 15 cm c/c for remaining portion with M.S. flat of size 40 x 6 mm vertical at center including iron hold fast boxes for fixing 40 x 6 mm vertical at center including iron hold fast boxes for fixing 40 x 6 mm vertical at center including iron hold fast boxes for fixing shutters including welding finishing painting etc. complete. |
| 46 | Providing and fixing in position factory made box type steel window with glazed fan light including steelwindows of cold rolled section of 105 mm x 60 mm x 1.25 mm thick frame section filled with cement concrete (1:2:4) and metal pressed steel shutters of 20 gauge (1mm )as per detailed drawing and design or as directed including providing horizontal mild steel 12 mm square bars at 10 cm center to center, required F7B section, section76, section 20 mm x 5 mm mild steel flat for shutter and F4B section for frame, 3 mm thick glass of approved quality for fan light necessary fixtures and fastening etc.complete finishing with one coat of anticorrosive paint etc.complete |
| 47 | Providing and fixingsteelframe door of angle 50X 50X 6 mm with 16mm with mild steel bar horizantally at 10 cm c/c for ventilator portionincluding iron hold fast boxes for fixing shutters including welding, finishing,painting etc complete. |
| 48 | Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness lipped with 15mm (5mmx3) thick x 30 mm width on one style and top rail and 10 mm (5mmx2) thick x 30 mm width on other style and bottom rails. The inner panels laminated with 2 mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 design in different plain and/orprelim colours on one side after routing the moulded design on flush doors and 2 mmplain and/or prelam PVC on other side using rubber adhesive on flush door and solven tcement adhesive on the PVC lipping etc.as per direction of Engineer in charge and manufacturers specification and drawing etc. complete. |
| 49 | Sub Work No. 3 :- Pumping Machinary |
| 50 | Item No. 1 - Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding.Pump shall be suitable fopr various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415 V+/- 10%, Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraullc thrust.The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"sdesign.Antithrust stream lined non return valve shall be provided with the pump 3 m. Submersible copper conductor cable, in single/double run and 2 pair of erection clamp 65 mm width 10 mm thick shall be provided with each pump. |
| 51 | A) 5.00 HP Submerssible Pumpset |
| 52 | Item No. 2 - Providing & fixing valves of following dia. Including all taxes central & local transportationall matrial & labour charges etc. comp. |
| 53 | (A) 80mm dia Sluice Valve |
| 54 | (B) 80 mm dia Reflux Valve |
| 55 | ITEM NO.3- Providing & Supplying & layingISI mark G.I. pipes offollowing dia.including all taxes central & local, transportation all labour etc. comp. |
| 56 | (A) 80 mm dia. G.I. med class Pipe |
| 57 | Item No. 6- Providing & fixing MS flanged specials including all matrial & labour charges etc. comp. |
| 58 | Item No. 7 :- L.T. Control Panel Board - Designing, Providing , Errecting, Testing & Commissioning with Satsfactory Test & Trial ofVarious Panel Boards as per detailed specifications. |
| 59 | 1) MS sheet fabricated box for panel board |
| 60 | 2) Self Locking arrangement |
| 61 | 3) Marine water proof plywood |
| 62 | 4) ELCB 63Amp 4 Pole |
| 63 | 5) Volt Meter |
| 64 | 6) Ammeter |
| 65 | 7) Capacitor polypropylene condenser |
| 66 | 8) Pilot Lamp Set |
| 67 | 9) FASD starter |
| 68 | 10) Metal clad TPN switch 63 Amp |
| 69 | 11) EarthingGI Plate 0.6 x 0.6 x 0.6, charcoal |
| 70 | Item No. 8 :-Cables - Providing & Fixing Submersible cable 3 core 6 Sq. mm including all material & labour charges etc. comp. |
| 71 | Item No.9 :- Providing structural steel work in rolled stanctions composed of RSJ channel, etc., with caps, bases, mild steel plates, angles, brackets, cleats, gusset, plates, anchor bolts, etc. as per detailed design, drawings, or as directed by Engineer-in-charge including cutting, fabricatings, hoisting, erecting, fixing in possition, making riveted. bolted/welded connections etc, complete. |
| 72 | Sub Work No. 4:- Pumping Machinary |
| 73 | Item No. 1 - Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding.Pump shall be suitable fopr various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415 V+/- 10%, Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraullc thrust.The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"sdesign.Antithrust stream lined non return valve shall be provided with the pump 3 m. Submersible copper conductor cable, in single/double run and 2 pair of erection clamp 65 mm width 10 mm thick shall be provided with each pump. |
| 74 | A) 7.5 HP Submerssible Pumpset |
| 75 | Item No. 2 - Providing & fixing valves of following dia. Including all taxes central & local transportationall matrial & labour charges etc. comp. |
| 76 | (A) 80mm dia Sluice Valve |
| 77 | (B) 80 mm dia Reflux Valve |
| 78 | ITEM NO.3- Providing & Supplying & layingISI mark G.I. pipes offollowing dia.including all taxes central & local, transportation all labour etc. comp. |
| 79 | (A) 80 mm dia. G.I. med class Pipe |
| 80 | Item No. 6- Providing & fixing MS flanged specials including all matrial & labour charges etc. comp. |
| 81 | Item No. 7 :- L.T. Control Panel Board - Designing, Providing , Errecting, Testing & Commissioning with Satsfactory Test & Trial ofVarious Panel Boards as per detailed specifications. |
| 82 | 1) MS sheet fabricated box for panel board |
| 83 | 2) Self Locking arrangement |
| 84 | 3) Marine water proof plywood |
| 85 | 4) ELCB 63Amp 4 Pole |
| 86 | 5) Volt Meter |
| 87 | 6) Ammeter |
| 88 | 7) Capacitor polypropylene condenser |
| 89 | 8) Pilot Lamp Set |
| 90 | 9) FASD starter |
| 91 | 10) Metal clad TPN switch 63 Amp |
| 92 | 11) EarthingGI Plate 0.6 x 0.6 x 0.6, charcoal |
| 93 | Item No. 8 :-Cables - Providing & Fixing Submersible cable 3 core 6 Sq. mm including all material & labour charges etc. comp. |
| 94 | Item No.9 :- Providing structural steel work in rolled stanctions composed of RSJ channel, etc., with caps, bases, mild steel plates, angles, brackets, cleats, gusset, plates, anchor bolts, etc. as per detailed design, drawings, or as directed by Engineer-in-charge including cutting, fabricatings, hoisting, erecting, fixing in possition, making riveted. bolted/welded connections etc, complete. |
| 95 | SUB WORK NO.5 - Rising Main |
| 96 | ITEM NO.1- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984/1415 / 1278 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/ specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. |
| 97 | {A}90 mm dia.HDPE 10 kg/cm2 Pipe(Panas Reh) |
| 98 | ITEM NO.2 - Providing & supplying non return Valve of following dia. Including all taxes central & local transportation to site loading unloading etc. comp. |
| 99 | [A]80 mm dia.Non Return Valve |
| 100 | ITEM NO.3 - Providing & supplying AirValve of following dia. of approved make including all taxes central & local transportation to site loading unloading etc. comp. |
| 101 | (A) 15 mm dia. Air Valve PN-1 |
| 102 | ITEM NO.4- Providing & SupplyingISI mark G.I. pipes offollowing dia.including all taxes central & local, transportationetc. comp. |
| 103 | A} 80 mm dia. G.I. pipe med. Class |
| 104 | ITEM NO.5 - Providing & fixing PVC/GI/MS Spcials such asFlange ,bend, Elbow as per requirment including all taxes material & labour charges etc. comp. |
| 105 | ITEM NO.6- Excavation for foundation in following strata including removeing the excavated material upto a distance of 50 m. & lift as below including stacking & spreading etc. comp. |
| 106 | (A) SOIL |
| 107 | (B) HARD MURUM |
| 108 | (C) Soft Rock |
| 109 | (D) Hard Rock |
| 110 | ITEM NO.7 - Filling in plinth & floors murum bedding in trenches with approved murum from excavated material from foundation in 15 to 20 cm. layers including watering & compaction etc. comp. |
| 111 | ITEM NO.8- Lowering, Laying and Jointing H. D. P. E. pipes in proper position including all specials by compression fitting/ electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II |
| 112 | {A}90 mm dia.HDPE 10 kg/cm2 Pipe(Panas Reh) |
| 113 | ITEM NO.9- Lowering , laying & jointing in position following dia valves including cost of all labour jointing material including nut bolts and giving satisfactory testing etc comp. |
| 114 | [A]80 mm dia.Non Return Valve |
| 115 | ITEM NO.10- Lowering , laying & fixing in proper alignment and position Air valveof following dia. Including conveyance from store to site of work,all labour, giving satisfactory hydraulic testing comp. |
| 116 | (A) 15 mm dia. Air Valve PN-1 |
| 117 | ITEM NO.11- Lowering , laying & jointing G.I. pipes of following dia. Including conveyance from store to site of work,all labour, giving satisfactory hydraulic testing comp. |
| 118 | A} 80 mm dia. G.I. pipe med. Class |
| 119 | ITEM NO.12- Providing & fixing C.I. road box including loading unloading & carting to site of work including all necessary excavation in all types of strata & fixing in murum packing comp. |
| 120 | a} 100 mm X 225 mm (20kg) |
| 121 | ITEM NO.13- Refilling the excavated trenches with available excavated stuff with soft material first over pipe line & then hard material in 15 cm. layer with all lead & lift consolidaton surcharging etc. comp. |
| 122 | ITEM NO.14- Hydraulic testing of H. D. P. E./ M. D. P. E. pipeline to specified pressure including cost of all materials andlabour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.. |
| 123 | {A}90 mm dia.HDPE 10 kg/cm2 Pipe(Panas Reh) |
| 124 | ITEM NO.16 - Providing & laying in situ C.C.M-15 of trap metal for foundation & bedding including formwork & compaction etc.comp. |
| 125 | ITEM NO.17- Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, comp. |
| 126 | (A) Couplers 90 mm |
| 127 | (B) Elbow 90 Deg. 90 mm |
| 128 | © Elbow 45 Deg. 90 mm |
| 129 | (D) Spigot LNPE 90 mm |
| 130 | (E) Reducer 90 x 75 mm |
| 131 | (F) Tee 90 mm |
| 132 | (G) END CAP |
| 133 | SUB WORK NO.6- Distribution System - |
| 134 | ITEM NO.1- Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. |
| 135 | (B) 90 mm dia. HDPE 6 kg/cm2 Pipe |
| 136 | (C)75 mm dia. HDPE 6 kg/cm2 Pipe |
| 137 | ITEM NO.2- Providing & SupplyingISI mark G.I. pipes offollowing dia.including all taxes central & local, transportationetc. comp. |
| 138 | B}80mm dia. G.I. pipe med. Class |
| 139 | C}65mm dia. G.I. pipe med. Class |
| 140 | ITEM NO.3 - Providing & supplyingin position Sluice Valve of following dia. Including all taxes, jointing material etc. comp. |
| 141 | [B] 80 mm dia.Sluice Valve PN 1.0 |
| 142 | [C] 65 mm dia.Sluice Valve PN 1.0 |
| 143 | ITEM NO.4- Excavation for foundation in following strata including removeing the excavated material upto a distance of 50 m. & lift as below including stacking & spreading etc. comp. |
| 144 | (A) SOIL |
| 145 | (B) HARD MURUM |
| 146 | (C)Soft Rock |
| 147 | (D)Hard Rock by Chiselling |
| 148 | ITEM NO.5 - Filling in plinth & floors murum bedding in trenches with approved murum from excavated material from foundation in 15 to 20 cm. layers including watering & compaction etc. comp. |
| 149 | ITEM NO.6- Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/ electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II |
| 150 | (B) 90 mm dia. HDPE 6 kg/cm2 Pipe |
| 151 | (C)75 mm dia. HDPE 6 kg/cm2 Pipe |
| 152 | ITEM NO.7- Lowering , laying & jointing G.I. pipes of following dia. Including conveyance from store to site of work,all labour, giving satisfactory hydraulic testing comp. |
| 153 | B}80mm dia. G.I. pipe med. Class |
| 154 | C}65mm dia. G.I. pipe med. Class |
| 155 | ITEM NO.8 - Providing & fixing C.I. road box including loading unloading & carting to site of work including all necessary excavation in all types of strata & fixing in murum packingcomp. |
| 156 | a} 100 mm X 225 mm (20kg) |
| 157 | ITEM NO.9- Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, inspection charges, transportation up to store, transit insurance, loading, unloading, stacking excluding GST levied by GOI & GOM in all respect, etc. complete. |
| 158 | (B) Couplers 90 mm |
| 159 | (C) Couplers 75 mm |
| 160 | (E) Elbow 90 Deg. 90 mm |
| 161 | (F) Elbow 90 Deg. 75 mm |
| 162 | (H) Elbow 45 Deg.90 mm |
| 163 | (I) Elbow 45 Deg. 75 mm |
| 164 | (K) Equal Tee 90 mm |
| 165 | (M) Equal Tee 75 mm |
| 166 | (O) Reducer 110 x 90 |
| 167 | (P) Reducer 90 x 75 |
| 168 | (S) Spigot LNPE 90 mm |
| 169 | (T) Spigot LNPE 75 mm |
| 170 | U) End Cap 75 mm |
| 171 | ITEM NO.10 - Refilling the excavated trenches with available excavated stuff with soft material first over pipe line & then hard material in 15 cm. layer with all lead & lift consolidaton surcharging etc. comp. |
| 172 | ITEM NO.11- Lowering , laying & jointing in position following dia valves including cost of all labour jointing material including nut bolts and giving satisfactory testing etc comp. |
| 173 | [B] 80 mm dia.Sluice Valve PN 1.0 |
| 174 | [C] 65 mm dia.Sluice Valve PN 1.0 |
| 175 | ITEM NO.12- Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. |
| 176 | (B) 90 mm dia. HDPE 6 kg/cm2 Pipe |
| 177 | (C)75 mm dia. HDPE 6 kg/cm2 Pipe |
| 178 | ITEM NO.13 - Providing & laying in situ C.C.M-15 of trap metal for foundation & bedding including formwork & compaction etc.comp. |
| 179 | ITEM NO. 14 -Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge |
| 180 | 80 mm |
| 181 | ITEM NO.15 - Providing & fixing MS Flanged specials including all material & labour chargesetc.comp. |
| 182 | SUB WORK NO.7 - MISCELLAEOUS WORK |
| 183 | Item No.1-Providing & fixing an information board of standard size & specification etc. comp. |
| 184 | ITEM NO.2 - Commisioning running & maintaining the scheme to quantites rated capacity including manning necessary persoonel such as requirment of scheme & who should also administer chemical dose for one month together with trainning of persoonel spared by local body & handing over the scheme to local body after completion of above period as directed by Engineer incharge.( For one month) |
AI Tender Summary
Tender Timeline
Dec 22, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedDec 29, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 30, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender