Grama Panchayat has published Tender For Material Supply 98-No Vidhyabhavan Anganwady Construction In Velupadam Varandarappilly Gramapanchayat. Submission Date for this Tender is 06-01-2024. Kitchen Equipment Tenders in Thrissur Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | WORKS ITEMS |
2 | Stone for masonry work |
3 | Through and bond stone size 24 x 24 x 39cm |
4 | Portland Cement |
5 | Coarse sand (zone III) |
6 | Stone Aggregate(single size): 40 mm nominal size |
7 | Stone Aggregate(single size):20 mm nominal size |
8 | Solid blocks of size 30x20x15cm |
9 | wall form panel 1250x500 mm |
10 | Corner angle 45x45x5 mm 1.50 m long |
11 | 100 mm channel shoulder 2.5 m long |
12 | Double clip (bridge clip) |
13 | Single clip |
14 | M.S. Tube 40 mm dia |
15 | Structural steel such as tees, angles, channels and R.S. joists |
16 | Red oxide Zinc chromate primer |
17 | Adjustable telescopic prop 3 m (2.02-3.75m) |
18 | Beam clamp 300-380 mm (450-1070 mm) |
19 | Twisted steel/deformed bars |
20 | Stone Aggregate(single size): 10 mm nominal size |
21 | Wall form panel 1250x450xmm |
22 | Corner angle 45x45x5 mm 2.50 long |
23 | Column clamp 450x1070 mm |
24 | Prop 2 m (2-3.5m) |
25 | Second class kail wood in planks |
26 | Second class kail wood in scantling |
27 | Hollock ballies 125 mm diameter |
28 | Adjustable span ESO+SI (2.35-3.40) |
29 | Safeda ballies 125 mm diameter |
30 | Fine sand (zone IV) |
31 | Anjili wood scantls |
32 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
33 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
34 | Bright finished or black enameled mild steel screws 40 mm |
35 | Bright finished or black enameled mild steel screws 20 mm |
36 | Anjili wood planks |
37 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
38 | Mild Steel round bar above 12 mm dia |
39 | Flats up to 10 mm in thickness |
40 | Rawl plug 50 mm (designation 10 nos) |
41 | Oxidised mild steel tower bolt (barrel type) 200x10 mm |
42 | Oxidised mild steel screws 30 mm |
43 | Oxidised mild steel handles 125 mm |
44 | Oxidised mild steel screws 25 mm |
45 | Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile |
46 | 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) |
47 | Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm |
48 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
49 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
50 | Vitrified floor tile 60x60 cm |
51 | Acrylic exterior paint |
52 | Exterior primer |
53 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
54 | Plastic emulsion paint |
55 | Pink primer (for wood) |
56 | Synthetic enamel paint in black or chocolate shade |
57 | Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers |
58 | Vitreous china pedestal type wate closet |
59 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
60 | Vitreous china flat back wash basin 550x400 mm |
61 | 15 mm C.P.brass tap |
62 | C.P. brass waste 32 mm |
63 | C.I. bracket for wash basin and sinks |
64 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
65 | PVC pipe 25 mm outer dia. 10kgf cm2 |
66 | PVC pipe 32 mm outer dia. 10Kgf/cm2 |
67 | PVC pipe 50 mm outer dia.6kgf/cm2 |
68 | PVC pipe 63 mm outer dia . 6kgf/cm2 |
69 | PVC pipe 110 mm outer dia 6kgf/cm2 |
70 | PVC bend 110 mm dia |
71 | PVC door Elbow 110 mm dia |
72 | PVC door Tee 110x110x110 mm dia |
73 | PVC vent cowl 110 mm dia |
74 | PVC offset 110 mm dia |
75 | PVC door Elbow 63 mm dia |
76 | PVC bend 63 mm dia |
77 | PVC door Tee 63 x63x63mm dia |
78 | PVC vent cowl 63 mm dia |
79 | Rectangular shape 453x357 mm Mirror with Plastic moulded frame |
80 | Hard board 6 mm thick |
81 | Chromium plated Brass screws 25 mm |
82 | PTMT - Towel Rail (600 mm) |
83 | Second class teak wood in scantling |
84 | C.P. Brass angle valve 15 mm |
85 | PTMT - Soap Dish/Holder 138x102x75 mm |
86 | 15mm silt with CP gratings |
87 | Brass bib-cock-15 mm dia |
88 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
89 | Stainless steel (Grade - 304) hollow section round/square tubes |
90 | Stainless steel bolts /square bar and plates |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail