Tender For Supply Of Materials, Palakkad-Kerala

Tender For Supply Of Materials - Stone for masonry work Through and bond stone size 24 x 24 x 39cm Carriage of Soling stone & masonry stone Sundries Portland Cement Coarse sand (zone III) Structural steel such as tees, angles, channels and R.S. joists Steel Red oxide Zinc chromate primer Carriage Adjustable span ESO+SI (2.35-3.40) Adjustable telescopic prop 3 m (2.02-3.75m) Stone Aggregate(single size):20 mm nominal size Stone Aggregate(single size): 10 mm nominal size Carriage of Stone aggregate below 40 mm nominal size Carriage of Coarse sand Carriage of Cement Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper Vibrator (Needle type 40 mm) Twisted steel/deformed bars Carriage of Steel Solid blocks of size 30x20x20cm Cement Coarse sand Wall form panel 1250x450xmm Corner angle 45x45x5 mm 2.50 long Column clamp 450x1070 mm Prop 2 m (2-3.5m) Fine sand (zone IV) Fine sand (1 part badarpur sand : 2 parts jamuna sand Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre Carriage and sundries Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. Vitrified floor tile 50x50 cm Pink primer (for wood) Brass 100 mm mortice latch and lock with 6 levers without pair of handles Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock Anodised Aluminium tower bolt (barrel type)300x10 mm Chromium plated Brass screws 30 mm Anjili wood scantls Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm Bright finished or black enameled mild steel screws 40 mm Bright finished or black enameled mild steel screws 20 mm Anjili wood planks Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) Synthetic enamel paint in black or chocolate shade 200 mm Aluminium aldrop Iron hooks & eyes 100 mm Vitreous China orrisa type w.c. pan size 580 mm Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) 100 mm S.C.I. trap with vent heel Vitreous China flat back wash basin 630x450 mm 15 mm C.P.brass tap C.P. brass waste 32 mm C.I. bracket for wash basin and sinks Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm Chlorinated Polyvinyl - Chloride (CPVC) pipe 15 mm outer dia Stone aggregate below 40 mm nominal size Chlorinated Polyvinyl - Chloride (CPVC) pipe 25 mm outer dia PVC door Elbow 110 mm dia Polyethylene water storage tank with cover and suitable locking arrangemnet Plastic emulsion paint 48 mm X40 mmX1.5 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm Mild Steel round bar above 12 mm dia Flats up to 10 mm in thickness Rawl plug 50 mm (designation 10 nos) Oxidised mild steel handles 125 mm Oxidised mild steel screws 25 mm Stone Aggregate(single size): 40 mm nominal size Carriage of Stone aggregate 40 mm nominal size and above Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green PVC pipe 50 mm outer dia.6kgf/cm2 PVC pipe 63 mm outer dia . 6kgf/cm2

Refer document

Refer document

INR 8.54 Lakhs /-