Central University Of Punjab has published Tender For Street Light Works Along The Main Road In The Campus Of Central University Of Punjab At Village Ghudda, Distt. Bathinda-151401. Submission Date for this Tender is 05-01-2024. Street Lighting Tenders in Bathinda Punjab. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Supplying, installation (with civil foundation as requirted), testing and commissioning of outdoor double door floor mounted modular, sectionalised, compartmentalized type MV cubical panel board of suitable size fabricated from CRCA sheet steel of 2 mm thick for frame work, enclosure and doors, 3 mm thick for gland plates with stiffeners wherever required,having canopy for rain water protection , having vibration free structure chemically treated with seven tank process before painting for surface treatment and powder coated, with aluminium bus DMC/SMC busbar supports, suitable for 3 phase 415 V 50 HZ AC supply i/c providing and fixing the following switchgear & accessories etc. mounted thereon complete with gaskets and solid copper connections & interconnections as per specifications complete as required. The panel shall be supplied with suitable pedestal of angle iron (The board shall be dust & vermin proof with minimum degree of protection of IP 54)INCOMING 125 Amp FP MCCB 25 KA:- 1No 4 strip 200 Amp copper bus bar :- 1Set OUTGOING 40 A SPN MCB 10 KA:- 8 Nos. Digital Timer and contactor of suitable capacity for ON/OFF external lighting along with indicators.Digital Voltmeter 0-500V. LED Type Phase Indicating lamp For RYB -1Set25 mm x 5mm copper earth bus through out the width of panel with suitable drilled holes etcDanger notice plate vitreous enamelled white onboth sides and inscription in signal red colour of mild steel (200mm x 150 x 2mm thick) - 1 No. |
2 | Supplying, Installation, Testing and commissioning of 8mtr Height hot dip galvenised(65micron DFT) pole fabricated with 3m thick sheet of octagonal cross section fabricated in accordance to IS:2629 having bottom 135mm across the flat and Top 70mm across the flat, cable termination box of suitable size fixed with 60Amp aluminium bus bar and 2Nos. 6Amp "C" series SPMCB, 1.5Sqmm Wiring from MCB to Light fitting, base plate of size not less than 200mmX200MMX12MM thick complete with RCC 1:3:6( 1cement: 3coarse sand: 6 graded stone aggregate 40mm nominal size) foundation of approved dimensions as per manufacturer"s design and 4Nos. steel foundation bolts of 16mm dia, 750mm long complete with 1 meter long double arm differential type bracket fixing on pole one at 8mtr height and other at 6mtrs height to hold the suitable fittings etc. as required as per specifications. |
3 | Supplying, Installation, Testing and commissioning of45 Watt outdoor LED StreetLight |
4 | Supplying, Installation, Testing and commissioning of25 Watt outdoor LED StreetLight |
5 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required: 63 mm dia (OD-63 mm & ID-51 mm nominal) |
6 | Earth with GI earth pipe 4.5 mtr long 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement for watering pipe with charcoal/ cokeand salt etc. as required. |
7 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
8 | Supplying and laying 6SWG G.I wire at .5 mtr below ground level for conductor earth electrode, including connection/termination with GI thible etc. as required |
9 | Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. |
10 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in existing RCC/HUME/Metal pipe as required : upto 35 sq. mm |
11 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.:- 4 X 16 sq. mm (28mm) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail