Tender For Shifting Of L.I Scheme At Ratanmani Vc (Field-I) Under Ridf-Xxix During The Year 2023-24/Sh-Construction Of Pump House, Priming Tank,Dismantaling And Re-Installation Of Centrifugal Pump Motor Set, Panal Board Etc. Including Works.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Dec 2023
0 days left
EMD
17961
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Shifting Of L.I Scheme At Ratanmani Vc (Field-I) Under Ridf-Xxix During The Year 2023-24/Sh-Construction Of Pump House, Priming Tank,Dismantaling And Re-Installation Of Centrifugal Pump Motor Set, Panal Board Etc. Including Works.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in-charge. |
| 2 | Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials with all lifts and upto a lead of 50m etc. complete as per direction of the Engineer- in-charge:- |
| 3 | i) In cement mortar |
| 4 | Removing mortar from brick and cleaning bricks including stacking bricks and disposal rubbish with all lifts and upto a lead of 50 m etc. complete as per direction of the Engineer- in-charge:- |
| 5 | i) In cement mortar |
| 6 | Dismantling steel work in built up section manually / mechanically without dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc. complete as per direction of the Engineer- in-charge. |
| 7 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.-All kinds of soil |
| 8 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level: |
| 10 | i) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size) |
| 11 | ii) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 12 | First class brick work in foundation and plinth including cost of all materials as required complete:- |
| 13 | i)In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 14 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:- |
| 15 | i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 16 | Extra for brick masonry work in triangular, square and rectangular pillars including cost of all materials as required complete. |
| 17 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- |
| 18 | i)In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 19 | 12 mm cement plaster of mix |
| 20 | i)Cement mortar 1:4 (1 cement : 4 fine sand) |
| 21 | 15 mm cement plaster on the rough side of single or half brick wall of mix: |
| 22 | i) Cement mortar 1:4 (1 cement : 4 fine sand) |
| 23 | Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of Engineer in-charge |
| 24 | i)40mm thick. |
| 25 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size). |
| 26 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 27 | i) Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 28 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 29 | i) i) Hot finished welded type tubes |
| 30 | Providing structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. |
| 31 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 32 | i) i) 0.63mm thick with zinc coating not less than 275gm/m2 |
| 33 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : |
| 34 | i) New work (two or more coats) including a coat of appropriate steel primer but excluding a coat of mordant solution |
| 35 | Applying a coat of mordant solution on G.S. sheet [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : |
| 36 | i)With a solution made of 38 gms of copper acetate in litre of soft water |
| 37 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:- |
| 38 | i) i) Using M.S. angels 40x40x6 mm for diagonal braces. |
| 39 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: |
| 40 | i) Two or more coats on new work over an under coat of suitable shade with ordinary paint (primer) of approved brand and manufacture |
| 41 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete |
| 42 | i) Fixed to steel windows by welding. |
| 43 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 44 | Dismentaling of old pump/motor from base & stacking of materials & return the same to Sub-Divisional store as per direction of the Engineer-in-Charge. |
| 45 | Installation of pumpset including carriage of materials from M.I store of Resource Division to site of work including trial run for 10hrs. intwo spell. |
| 46 | Dismental of pannel board as per direction of the Engineer-in-charge. |
| 47 | Labour charge for reinstallation of all electrical equipments (dismentalled serviceable materials, if any additional/ replacement of electrical eqiupments required will be paid separtely) on the pannel board including trial run for 10 hrs in two spell complete as per direction of the Engineer-in Charge. |
| 48 | Providing & fitting fixing of pannel board of local teak wood for fitting & fixing of electrical items including 2 nos. MS angle post ( Size 50X50X6mm 2.80 Mtr. long) nuts& bolts etc. for errection of the same by 1 : 1.5 : 3 cement concreate casting (1feetX1feetX2feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engineer-in-Charge. |
| 49 | i) Size 1.80X1.20X0.025 mtr. |
| 50 | Providing & fitting fixing Steel sheet enclosed switch Fuse unit ( Suitable for DIN fuse) triple pole with Neutral Link (TPN) , 415/500 Volt, complete as per direction of Engineer-in Charge. |
| 51 | i) Current range 63 Amps. |
| 52 | ii) Current range 200 Amps. |
| 53 | Providing and fixing G.I. pipes of Heavy class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.A. External work. |
| 54 | i) 150 mm dia. nominal bore |
| 55 | ii) 125 mm dia. nominal bore |
| 56 | Supplying & fitting fixing of GI . bend of approved quality. |
| 57 | i) 150 mm dia. nominal bore |
| 58 | ii) 125 mm dia. nominal bore |
| 59 | Providing & fitting fixing M.S flange (10mm thick) at site of work of approved quality. |
| 60 | i) 150 mm dia |
| 61 | ii) 125 mm dia |
| 62 | Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality. |
| 63 | i) 150 mm dia |
| 64 | ii) 125 mm dia |
| 65 | Providing & fitting fixing MS hose clamp with nuts & bolts etc. complete at site of work of approved quality. |
| 66 | i) 150 mm dia |
| 67 | Hiring charge of welding set of single phase with operating staff and carrying upto the site of work including loading and unloading (both way) complete as per direction of Engineer-in charge. |
| 68 | Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.A. External work. |
| 69 | a) 40 mm dia. nominal bore |
| 70 | Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 71 | i) 40 mm dia |
| 72 | Providing and fitting fixing of brass fullway valve with handle in the GI pipe line including cutting, threading etc. complete as per CPWD specification and direction of the Engineer - in -charge. |
| 73 | i) 40 mm dia |
AI Tender Summary
Tender Timeline
Dec 22, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedDec 30, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 30, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender