Tender For Mv Addition Work At Kamco Palakkad Unit Including Liasoning With Kseb & Electrical Inspectorate For Necessary Approval
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Jan 2024
0 days left
EMD
8067
Bank guarantee accepted
Document Fee
1428
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
athani → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Mv Addition Work At Kamco Palakkad Unit Including Liasoning With Kseb & Electrical Inspectorate For Necessary Approval
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Jan-2024 | DATE EXTENSION_1_GT27_MV ADDITION WORK PU | Date | 04-Jan-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | MV ADDITION WORK AT KAMCO PALAKKAD UNIT INCLUDING LIASONING WITH KSEB & ELECTRICAL INSPECTORATE FOR NECESSARY APPROVAL |
| 2 | Supply, installation, testing & commissioning of cubicle type floor mounting front accessible Sub Panel consisting ofIncomer :- 1No. 250A TPN switch disconnector.Outgoing :- a) 1No. 125A TPN SFU with HRC fuse link. b) 5No. 63A TPN SFU with HRC fuse link.Metering :- 1Set. Phase indication, 1No. MF meter (V,I,Hz) with CT\"s & control MCB\"s etc.,Busbar :- 1 Set. 250A TPN Alu. Bus bar with heat shrinkable sleeves,SMC supports, SMC shrouding etc.,All the above assembled in 16SWG CRCA sheet steel enclosure with powder coated painting with necessary interconnections and control wirings etc., |
| 3 | Supply & fixing of FN 400 switched Neutral kit for altering PTN switch to 4 Pole with alteration of existing nuetral busbars and complete accessories for connecting DG source. |
| 4 | Supply, fixing & wiring of MF meter and RYB indiation, CT for DG. Incomer in MSB. |
| 5 | Supply & fixing of Interlock in EB ACB incomer & DG SFU for avoiding parallel operation of EB & DG. |
| 6 | Supply & fixing of 4way double door TPN VDB consisting of 1No. 63A ELCB+MCB as incomer, 2No. 25A TP MCB & 2No. 16A TP MCB for outgoing. |
| 7 | Supply & fixing of 12way single phase LDB consisting of 1No. 25A 2P ELCB+ MCB as incomer, 10No. 6A SP MCB for outgoing. |
| 8 | Supply & fixing of 100A SDU enclosure with extended loose wire cable box for receiving 3.5 core 95Sq.mm. Ar. XLPE Alu. Cable. |
| 9 | Supply & fixing of 40A 4P MCB isolator with enclosure & extended loose wire cable box. |
| 10 | Supply & fixing of starter panel with 1No. 40A 4P MCB isolator, 1No. 3HP DOL starter and complete interconnections & control wiring etc., |
| 11 | Supply & laying of following sizes (a-e) of Ar. XLPE Alu. Cables with necessary clamps/tie, screws, bolts & nuts etc., (without civil work)a) 3.5 Core 185Sq.mm. Ar. Alu. Cable |
| 12 | b) 3.5 Core 95Sq.mm. Ar. Alu. Cable |
| 13 | c) 3.5 Core 25Sq.mm. Ar. Alu. Cable |
| 14 | d) 4 Core 10Sq.mm. Ar. Alu.Cable |
| 15 | e) 4 Core 6Sq.mm. Ar. Alu. Cable |
| 16 | Supply & fixing of cable gland and end termination materials suitable for following sizes (a-e) of Ar. XLPE Alu. Cables with necessary sockets, bolts & nuts etc.,a) 3.5 Core 185Sq.mm. Ar. Alu. Cable |
| 17 | b) 3.5 Core 95Sq.mm. Ar. Alu. Cable |
| 18 | c) 3.5 Core 25Sq.mm. Ar. Alu. Cable |
| 19 | d) 4 Core 10Sq.mm. Ar. Alu.Cable |
| 20 | e) 4 Core 6Sq.mm. Ar. Alu. Cable |
| 21 | Supply & fixing of 3.5 core 185Sq.mm. straight through joint kit (DG cable) |
| 22 | Supply & laying of following sizes of GI flat/Cu. wire with necessary welding, hardwares etc.,a) 25x6mm. GI flat |
| 23 | b) 10SWG copper wire. |
| 24 | c) Earth bus |
| 25 | Supply, fabrication & fixing MS angle/flat with necessary hardwares etc., |
| 26 | Supply & laying of 20mm PVC pipe with clamp, screws, cable tie, bend, junction box etc., |
| 27 | Supply & wiring of circuit mains by using 2Runs of 1.5Sq.mm. wire and 1Run 1.5Sq.mm. Green Cu. wire for earth. |
| 28 | Supply & wiring of circuit mains by using 2Runs of 2.5Sq.mm. wire and 1Run 1.5Sq.mm. Green Cu. wire for earth. |
| 29 | Supply & fixing of 80W LED high bay light with Alu. Body and clear glass for wide beem distribution. |
| 30 | Supply & fixing of 18W industrial battern luminaire for Retrofit LED tube with 18W tube. |
| 31 | Supply & fixing of 80W LED street light with Alu. Body and clear glass, LED lens for wide beam distribution. |
| 32 | Supply & fixing of legrand make 6modulebox, front plate,4No. 6A switch, 1No. 6A socket. |
| 33 | Supply and fixing of 3Module box, front plate, 3No. 6A switch. |
| 34 | Supply & fixing of 6 module box, front plate with 1No. 6A switch, 1No. 6A socket, 1No. 16A switch and 1No. 16A socket. |
| 35 | Service charges for preparation of engineering drawing and getting approval from Electrical Inspectorate. (Necessary statutory fees will be borne by KAMCO.) |
| 36 | Service charges for preparation of completion report and getting energisation sanction from Electrical Inspectorate. (Necessary statutory fees and Liason charges will be borne by KAMCO.) |
AI Tender Summary
Tender Timeline
Jan 01, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 04, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 04, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 06, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender