|
| 1 | SWTP |
| 2 | Providing fitting fixing steel sheet enclosed switch fuse unit ( suitable for DIN fuses), triple pole with Neutral Link (TPN) , 415/500 Volt, L & T / Havells / BCH make etc. complete as per spc and direction of the Engineer in charge. |
| 3 | i) 100 amps |
| 4 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge. |
| 5 | 35 HP/26 kw Relay range within 20-32 + 10% |
| 6 | 100 HP/ 75 kw Relay range within 45-75 + 10% |
| 7 | Rewinding of Motor suitable V.T. pumps by complete dismantling in/c providing & rewinding with Super enamelled copper conductor (as per IS : 13730 Part-3 ) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. |
| 8 | ii. 25 - 30 HP |
| 9 | v. 75 - 90HP |
| 10 | Repairing of V.T. pumps by providing and replacing of bronze impeller ( conforming to IS : 1710 ) as per specification and the direction of the Engineer-in-charge |
| 11 | iii. for 40000 / 50000 GPH capacity V.T. pump |
| 12 | Repairing of V.T. pumps by providing and replacing of CI bowel case as per specification and the direction of the Engineer-in-charge. |
| 13 | iii. for 40000 / 50000 GPH capacity V.T. pump |
| 14 | Repairing of V.T. pumps by providing and replacing of CI suction/discharge case as per specification and the direction of the Engineer-in-charge |
| 15 | iii. for 40000 / 50000 GPH capacity V.T. pump |
| 16 | Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. |
| 17 | PN-1.6 - 200 mm dia. |
| 18 | PN-1.6 - 300 mm dia. |
| 19 | Clearing jungle including uprooting of rank vegetable grass brush wood trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 20 | Clearing the clarifloculator chamber of treatment plat in/c dewatering with all allied works as per derection of the Engineer-in-charge. |
| 21 | Clearing of sludge water storage tank of treatmrnt plant in/c dewatering with all allied works as per direction of the Engineer-in-charge |
| 22 | Clearing the clear water Reservoir pf treatment plant in/c dewatering with all allied works as per direction of the Engineer-in-charge. |
| 23 | Supplying bamboo (1st Class) 85 mm to 100 mm dia and making shoe with end tappered upto 300mm from the bottom of the bamboo as per drawing and specification. |
| 24 | For Temp. Bandh 1x2x145 nos x 3.50 m |
| 25 | Handiling and driving bamboo ( 1st class) 85 to 100 mm dia upto the length required by heavy hammer as per drawing and specification. |
| 26 | For Temp. Bandh 1x2x75 nos x 2.00 m |
| 27 | Providing and fitting , fixing bamboo ( 1st class) 85 to 100 mm dia for horizeontal,diogonal bracing stut etc. with nails/ spikes and binding wire (GI 2.0 mm) as per drawing and specification. |
| 28 | For Temp. Bandh 1x2x3x22.00 m |
| 29 | Providing and placing gunny / polythene (of minimum wall thikness of 500 micrin) bags filled with sand ( of minimum qty of 0.034 cum) and properly manually stitched to avoid any leakage of sand as per specification. |
| 30 | Total |
| 31 | Providing and fitting , fixing double layer split muli bamboo tatti lining in position as per drawing amd specificetion. |
| 32 | For Temp. Bandh 1x2x22.00x2.00 |
| 33 | Providing & fitting , fixing 3 pole Power Contractor type415 V, 50 Hz,( L& T make) as per direction of the Engineer-in-Charge. |
| 34 | (i) ML 1.5 |
| 35 | (ii) ML 2 |
| 36 | Providing & fitting , fixing Bimetal overload relay type ML series, L& T make as per direction of the Engineer-in-Charge. |
| 37 | (i) 15-21 Amps |
| 38 | (ii) 20-32 Amps |
| 39 | Providing & fitting , fixing std. operating coil for 415 V, 50 Hz, L& T make as per direction of the Engineer-in-Charge. |
| 40 | (i) ML 1.5 |
| 41 | (ii) ML 2 |
