Public Administrative Department Local Bodies Closing in 0 days TDR #41226907

Tender For Supply Of Electrical Material At Municipal Council Saoner.

Issued by Local Bodies · saoner, Maharashtra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Dec 2023
0 days left
EMD
25000
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
saoner → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Supply Of Electrical Material At Municipal Council Saoner.-2 H.M.S. P.V.C. Conduit 25 Mm. Dia. 3 H.M.S. P.V.C. Conduit 32 Mm. Dia. 4 Upvc Reinforcedflexible Conduit 25 Mm In Dia. 5 Upvc Reinforcedflexible Conduit 32 Mm In Dia. 6 Pvctrunking ( Pvc Casing-N-Capping ) Ofsize25 Mm 7 Pvctrunking ( Pvc Casing-N-Capping ) Ofsize32 Mm 8 Pvcboxtrunking Ofsize50x50 Mm 9 Upvc Gland / Adaptor Suitable For 20 Mm 10 Upvc Gland / Adaptor Suitable For 25 Mm 11 Upvc Gland / Adaptor Suitable For 31 / 32 Mm 12 2X1.5 Sq.Mm Frlshcopperpvc Insulated Wire 13 2X2.5 Sq.Mm Frlshcopperpvc Insulated Wire 14 2X4 Sq.Mm Frlshcopperpvc Insulated Wire 15 2X6 Sq.Mm Frlshcopperpvc Insulated Wire 16 1X4 Sq.Mm Frlshcopperpvc Insulated Wire 17 1X6 Sq.Mm Frlshcopperpvc Insulated Wire 18 3X4 Sq.Mm Frcopper Pvc Insulated Wire 19 3X6 Sq.Mm Frcopper Pvc Insulated Wire 20 2*4 Sq. Mm .Service Wire 21 2*6 Sq. Mm .Service Wire 22 Pvc Insulated Pvc Round Sheathed 4 Sq.Mm 3 Core Flexible Multi Strandedcopper Cable 23 Modular Type Switch 6A 24 Modular Type Switch 16A 25 Modular Type Bell-Push 6A 26 Modular Type D.P. Switch 32A 27 Modular Type 3 Pin 6A Multi Sockets With Safety Shutter 28 Modular Type 3 Pin 16A Multi Sockets With Safety Shutter 29 Modular Type Buzzer 220 / 250V 30 Modular Type Electronic Step Regulator For Fan. 31 Modular Type Blanking Plate One Module 32 Pvc Surface Modular Switch Box With Double Mounting Plate For 2 Modules. 33 Pvc Surface Modular Switch Box With Double Mounting Plate For 3 Modules 34 Pvc Surface Modular Switch Box With Double Mounting Plate For 4 Modules 35 Pvc Surface Modular Switch Box With Double Mounting Plate For 6 Modules 36 Spvc Surface Modular Switch Box With Double Mounting & Front Plate For 8 Modules 37 Pvc Surface Modular Switch Box With Double Mounting Plate For 12 Modules 38 Pvc Surface Modular Switch Box With Double Mounting Plate For 16 / 18 Module. 39 16 / 20 / 25 A Starter ( Modular Range ) 2 Module 40 6 To 32 A Spmcb Suitable To Fix In 1 Module 41 Modular Type Usb Charger Socket 42 Point Wiring For Light / Fan / Bell In20 Mm Isi Marked Hms Pvc Conduit 43 Point Wiring For Independent Plug 44 Extention Board 6 Amp 45 Led Square / Circular 5 To 8W Down Light 46 Led Square / Circular 9 To 12W Down Light 47 Led Square / Circular 13 To 15W Down Light 48 Led Square / Circular 16 To 20W Down Light 49 Square Shaped Crca / Die-Cast Aluminium Powder Coatedhousing Led Panel Light ( Slim Edge-Lit ) Suitable For Upto 8 W 50 Square Shaped Crca / Die-Cast Aluminium Powder Coatedhousing Led Panel Light ( Slim Edge-Lit ) Suitable For 9 W - 12 W 51 Square / Round Shaped Crca / Die-Cast Aluminium Powder Coatedhousing Led Panel ( Slim Edge-Lit ) Light Suitable For 13W To18w 52 Crca / Die-Cast Aluminium Powder Coatedhousing Led Panel Light ( Slim Edge-Lit ) Square / Round Shape Suitable For 19 To 24 W 53 Led Flexible Strip Light 5M Length Upto 25W 54 Led Flexible Strip Light 5M Length Upto 75W 55 Bulk Head Edge-Lit 10W Led 56 Led 18-20W Tube Light Fitting ( 4 Feet ) 57 Led Mirror Light With Integrated Driver Including 14W To 18W Lamp 58 0.5W, 230V Integral Type Led Lamp 59 Pigmy / Candle Lamp 100Watt 60 7W, 230V Integral Type Led Lamp. 61 12W, 230V Integral Type Led Lamp. 62 18W, 230V Integral Type Led Lamp. 63 18W Led Charging Lamp. 64 22W Led Charging Lamp. 65 Ding Dong / Electronic Musical Type Call Bell With Heavy Duty Coil. 66 Electronic Type Cordlesscallbell 67 Condenser 4 Microfarad 68 Led Street Light Fitting Suitable Forabove 50W Lamp, Including Lamp, With Pf >0.95Class Ip65. 69 Led Street Light Fitting Suitable For60w Lamp, Including Lamp, With Pf >0.95 Class Ip65 70 Led Street Light Fitting Suitable For Above 75W Lamp, Including Lamp, With Pf >0.95 Class Ip65 71 Led Street Light Fitting 100W, Including Lamp, With Pf >0.95 Class Ip65 72 Led Street Light Fitting 120 W, Including Lamp, With Pf > 0.95 Class Ip65 73 Led Street Light Fitting 150 W, Including Lamp, With Pf > 0.95 Class Ip 65 74 Led Flood Light Fitting Of 100W, Including Lamp, With Pf >0.95, Class Ip65 75 Led Flood Light Fitting Of 120W, Including Lamp, With Pf >0.95, Class Ip 65 76 Led Flood Light Fitting Of 150W, Including Lamp, With Pf >0.95, Class Ip 65 77 Led Flood Light Fitting Of 200W, Including Lamp, With Pf >0.95, Class Ip 65 78 Gate / Garden Light Fitting With 200Mm Dia. Glass Bowl Suitable For Upto 12W Led Lamp On Provided Pipe 79 Gate / Garden Light Fitting With 300Mm Dia. Glass Bowl Suitable For Upto 12W Led Lamp On Provided Pipe 80 Integral Post Top Lantern Fixtures ( Mushroom Type ) Suitable For Led Lamp Upto 12 W 81 Highbay Led Fitting Ip 65 With Lamp 70W-80W 82 Street Light Bracket Made From 25 Mm. Dia ‘B’ Class G.I. Pipe, 0.6 M In Length 83 Street Light Bracket Made From 40 Mm. Dia ‘B’ Class G.I. Pipe, 0.6M. In Length 84 Street Light Wall Bracket Made From 25 Mm. Dia ‘B’ Class G.I. Pipe 1.2 M In Total Length Complete 85 Street Light Wall Bracket Made From 40 Mm. Dia ‘B’ Class G.I. Pipe 1.2 M In Total Length Complete 86 Driver For Outdoor Led Fittings25w 87 Driver For Outdoor Led Fittings 45W 88 Driver For Outdoor Led Fittings 50W 89 Driver For Outdoor Led Fittings 75W 90 Driver For Outdoor Led Fittings 100W 91 Driver For Outdoor Led Fittings 150W 92 Driver For Outdoor Led Fittings 200W 93 Pcb For Outdoor Led Fittings25w 94 Pcb For Outdoor Led Fittings 45W 95 Pcb For Outdoor Led Fittings 50W 96 Pcb For Outdoor Led Fittings 75W 97 Pcb For Outdoor Led Fittings 100W 98 Pcb For Outdoor Led Fittings 150W 99 Pcb For Outdoor Led Fittings 200W 100 Outdoor Led Fitting Protector 25W - 200W 101 Metal Cawl 300 Mm 102 Metal Cawl 400 Mm 103 Storage Type Horizontal / Vertical Water Heater 15 Litres Capacity With Bee 5 Star Ratinghigh Impact Resistance Engineering Plastic Body 104 Storage / Pressure Type Horizontal / Vertical Water Heater 25 Litres With Bee 5 Star Rating Of Mild Steel Body. 105 Regular / Standard Model Ceiling Fan Of 1200Mm. Sweep Complete Erected In Position As Per Specification No. Fg-Fn / Cf 106 Five Star Rated Energy Saving Ceiling Fan 230 V A.C. 50 Cycles 1200 Mm Complete Erected In Position As Per Specification No. Fg-Fn / Cf 107 Supplying Condenser 2.5 Micro Farad For Ceiling Fan 108 Cabin Fan Of A.C. 230 V. 50 Cycles 250 Mm. / 300 Mm. Sweep Complete With Necessary Brackets For Fixing Cabin Fans, Wire Etc. 109 Cabin Fan Of A.C. 230 V. 50 Cycles 400 Mm. Sweep Complete With Necessary Brackets For Fixing Cabin Fans, Wire Etc. 110 Fresh Air Cum Exhaust Fan Of Light Duty 250 V A.C. 50 Cycles 300Mm. 1400 Rpm Rust Proof Body & Blades, Wire Mesh, Duly Erected In An Approved Manner. 111 Air Cooler ( Desert Cooler ) With Galvanised Steel Body 230 / 250 Volts, 50 Cycles, Normal Cooling Capacity Of 50 Cu.M Per Minute, With 12 Exhaust, Minimum 40 To 55 Litre Water Capacity Tank Complete. 112 Air Cooler ( Desert Cooler ) With Galvanised Steel Body 230 / 250 Volts, 50 Cycles, Normal Cooling Capacity Of 60 To 70 Cu.M Per Minute With 15 Exhaust Fan, Minimum 68 Litre Water Capacity Tank Complete. 113 Air Cooler ( Desert Cooler ) With Galvanised Steel Body 230 / 250 Volts, 50 Cycles, Normal Cooling Capacity Of 80 Cu.M Per Minute With 18 Exhaust Fan, Minimum 75 To 80 Litre Water Capacity Tank Complete. 114 Split Type Variable Speed Inverter Technology Room Air Conditioning Unit 2 Tr Capacity 115 Split Type Variable Speed Inverter Technology Room Air Conditioning Unit 1.5 Tr Capacity 116 Split Type Variable Speed Inverter Technology Room Airconditioning Unit 1 Tr Capacity 117 Sun Control Film On Glass To Achieve Better Cooling Effect Having 1.5 / 2 Mm Thickness, Ultra Violet Transmittance Less Than 2% And Solar Heat Rejection 78% In Approved Manner. 118 Split Typeroom Air Conditioning Unit With Variable Speed Inverter Technology 2.5 Tr Capacity 119 Soft Drawn Copper Pipe Suitable For Refrigeration System Having 22 Swg Thickness And Inner Dia / Size 12 Mm Complete. 120 Soft Drawn Copper Pipe Suitable For Refrigeration System Having 22 Swg Thickness And Inner Dia / Size 22 Mm Complete. 121 Cassette Type Variable Speed Inverter Technology Split Room Airconditioning Unit 2 Tr Capacity 122 Cassette Type Variable Speed Inverter Technology Split Room Air Conditioning Unit 3 Tr Capacity 123 Tower Type Room Air Conditioning Unit Of 2.5 Tr Capacity 124 Self-Contained Water Cooler 230 / 250 V 50 Cycles Nominal Cooling Capacity Of 80 Litres / Hr And Storage Capacity 120 Litres 125 Self Contained Water Cooler 230 / 250 Volts 50 Cycles Nominal Cooling Capacity Of 150 Liters / Hr And Storage Capacity 150 Liters 126 Fully Comprehensive Annual Maintenance Service For 80 / 120 / 150 Ltr. Water Cooler 127 Ultra Violet Storage Type Water Purifier ( Ro+Uv+Uf ) With Softener For Safe Drinking Water Consisting Of Uv Germicidal Tube Of 8W Capacity Choke Made Of Copper Wire And Two Indicator Lamps With Output Of Purified Water 7 To 8 Litre / Min With Activated Carbon Filter And Softener Operating On 230 V Single Phase A.C. Supply. 128 1400 Va Digital Pure Sine Waveinverter Based On Insulated Gate Bipolar Transistor ( Igbt ) Technology Single Phase 230V, 50 Hz Completeas Per Specification No.Ap-Inv ( Without Batteries ) 129 2500 Va Digital Pure Sine Waveinverter Based On Insulated Gate Bipolar Transistor ( Igbt ) Technology Single Phase 230V, 50 Hz Completeas Per Specification No.Ap-Inv ( Without Batteries ) 130 On Line Ups Pure Sine Wave Of 1 Kva Capacity Complete With Standard Features, Along With Necessary Smf Batteries For 30 Mins. Battery Backup, As Per Specification No. Ap-Ups 131 On Line Upspure Sine Wave Of 5 Kva Capacity Complete With Standard Features, Along With Necessary Smf Batteries For 30 Mins Battery Backup, As Per Specification No. Ap-Ups 132 12 V / 100Ah Tubular Battery With Battery Terminal Wire, Duly Charged Complete With 36 Months Warranty Complete 133 12 V / 150Ahtubular Battery With Battery Terminal Wire, Duly Charged Complete With 36 Months Warranty Complete 134 Fully Automatic Line Voltage Stabilizer Buck And Boost Type For Operation On Inputvoltage 160 To 270 V And Output Voltage 200 To 250 V Rated For 0.5 Kva Maximum Load And With Voltmeter, Selector Switch, 6A / 16A Flush Type 3 Pin Socket For Output And With 3 Core Flexible Cord And 3 Pin 6 / 16 A Plug Top Suitable For Refrigerator For Continuous Operation. 135 Solar Panel Comprising High Efficiency Poly-Crystalline / Multi Crystalline Photovoltaic Cell 100Wp, 12V 136 Solar Panel Comprising High Efficiency Poly-Crystalline / Multi Crystalline Photovoltaic Cell 250Wp, 24V 137 Solar Panel Comprising High Efficiency Poly-Crystalline / Multi Crystalline Photovoltaic Cell 300Wp, 24V With Necessary Clamps And Module Frame On Existing Structure Complete. Specification No. Esd-Sol / Cell 138 Battery With Capacity Of 12 V- 40 Ah With Duty Cycle 10-12 Hrs Suitable To Charge On Pv Cell With Necessary Wiring Connections Erected In Powder Coated Protection Box With Stand And Nut Bolts Complete. 139 Battery With Capacity Of 12 V- 75 Ah With Duty Cycle 10-12 Hrs Suitable To Charge On Pv Cell With Necessary Wiring Connections Erected In Powder Coated Protection Box With Stand And Nut Bolts Complete 140 Battery With Capacity Of 12 V- 150 Ah With Duty Cycle 10-12 Hrs Suitable To Charge On Pv Cell With Necessary Wiring Connections Erected In Powder Coated Protection Box With Stand And Nut Bolts Complete. 141 Solar Street Light Pole Comprising Of 12W X 2 Nos. Led Fittings, 12V Min. 100Ah Maintenance Free Lithium Battery, Min. 120Wp Spv Module, Ms Powder Coated Battery Box Weather Proof, Mounted On 75 / 80 Mm Dia. B-Grade Gi Pole Of 6 M. Height Along With Brackets, Foundation, Earthling And Necessary Accessories Complete. 142 Four Pole Power Contactor 430 V, 40 A For Time Switch Complete Erected On Provided Wooden Block / Box, With Necessary Materials. 143 Programmable Digital Almanac Timer Microcontroller Based 144 11 Kwp Off Grid Solar Power Pack With Gi Mounting Structure And Interconnecting Wires / Cables Along With 24V / 12V Pure Sine Wave Solar Power Inverter ( Thd<5% ) , 24V / 12V Charge Controller And 24V / 12V C-10 Rated Lead Acid Battery Bank Of Required Capacity And Required Spv Modules For Battery Backup Of 3 Hrs Complete. 145 1 Kwp Capacity On Grid Solar Power Pack With Gi Mounting Structure And Inter Connecting Wires / Cables Without Battery Bank Spv Modules And Solar Power Conditioning Unit Of Required Capacity Complete 146 Solar Water Pump Of 1 Hp Capacity, Dc Surface Type, 90000 Lpd, Total Head 10M, Comprising Of 900 Wp Pv Array / Submersible Type ( With Controller ) 42000 Lpd, Total Head Of 30M, Comprising Of 1200 Wp Pv Arraymounted On Gi Structure With Necessary Hardwarecomplete. 147 Double Pole Metal Clad Switch With Fuse And Neutral Link 240V, 16A On Iron / Gi Frame 148 Double Pole Metal Clad Switch With Hc Type Fuse And Neutral Link 240V, 32A On Iron / Gi Frame 149 Double Pole Metal Clad Switch With Hc Type Fuse 240V, 63Aon Iron / Gi Frame 150 Triple Pole Metal Clad Switch And Fuse 415V, 63A On Angle Iron / Gi Frame 151 Triple Pole Metal Clad Switch And Fuse 415V, 100A On Angle Iron / Gi Frame 152 Triple Pole Metal Clad Rewireable Fuse Switch 415V, 200A On Angle Iron / Gi Frame 153 Four Polemetalcladon Load Changeover Switch 415V, 63A Erectedon Angle Iron / Gi Frame Complete. 154 Four Pole Metal Clad On Load Change Over Switch 415V, 100A Erected On Angle Iron / Gi Frame Complete. 155 Four Pole Metal Clad On Load Change Over Switch 415V, 200A Erected On Angle Iron / Gi Frame Approved Make Complete. 156 On Load Four Pole Automatic Transfer Switch Suitable For 415V, 100A, 50 Hz, Capacitywith Enclosure, Automatic / Manual Inbuilt Time Delay, High Transfer Speed, Excellent Breaking Capacity, Superior Making Capacity, Compact & Light Weight, Erected On Provided Angle Iron / Gi Frame 157 On Load Four Pole Automatic Transfer Switch Suitable For 415V, 200A, 50 Hz Capacity With Enclosure, Automatic / Manual Inbuilt Time Delay, High Transfer Speed, Excellent Breaking Capacity, Superior Making Capacity, Compact & Light Weight, Erected On Provided Angle Iron / Gi Frame 158 Metal Clad Distribution Board 240V, 4 Way, 16A Perway &Neutral Barconnector Completeerectedoniron / Giframe 159 Metal Clad Distribution Board 240V, 6 Way, 16A Perway &Neutral Barconnector Completeerectedoniron / Gi Frame 160 Metal Clad Distribution Board 240V, 8 Way, 16A Perway &Neutral Barconnector Completeerectedoniron / Gi Frame 161 Street Light Control Panelin Powder Coated Crca 14 / 16 Swg Sheet, Outdoor Type, Single Phase, 240 V Consisted Of Suitable Rating Contactor, 24 Hrs Digital / Astronomical Time Switch With Minimum 5 Years Battery Backup, Spn Mcb 63 Aauto / Manual Selector Switch, On / Off Push Buttons, Indicator Lamps, Control Wiring, Metering Device, Etc For Automatic Operation & Overcurrent, Short Circuit, Earth Fault Protection Of Street Lights Upto The Max Load Of 12 Kw On Provided Iron Frame / Cc Foundation Complete. 162 Street Light Control Panelin Powder Coated Crca 14 / 16 Swg Sheet, Outdoor Type, Three Phase, 415Vconsisted Of Suitable Rating Contactor, 24 Hrs Digital / Astronomical Time Switch With Minimum 5 Years Battery Backup, Tpn Mcb 63 Aauto / Manual Selector Switch, On / Off Push Buttons, Indicator Lamps, Control Wiring, Metering Device, Etc For Automatic Operation & Overcurrent, Short Circuit, Earth Fault Protection Of Street Lights Upto The Max Load Of 12 Kw On Provided Iron Frame / Cc Foundation Complete. 163 Street Light Control Panelin Powder Coated Crca 14 / 16 Swg Sheet, Outdoor Type, Three Phase, 415 V Consisted Of Suitable Rating Contactor, 24 Hrs Digital / Astronomical Time Switch With Minimum 5 Years Battery Backup, Tpn Mcb 110 Aauto / Manual Selector Switch, On / Off Push Buttons, Indicator Lamps, Control Wiring, Metering Device, Etc For Automatic Operation & Overcurrent, Short Circuit, Earth Fault Protection Of Street Lights Upto The Max Load Of 12 Kw On Provided Iron Frame / Cc Foundation Complete. 164 Street Light Control Panel Outdoor Type, For Single Phase 2 Wire System Having In Built Astronomical Adjustable Programmable Timer With Minimum 5 Years Battery Backup, 2 Pole Contactor Upto 60 A, With Maintenance Mode To Switch On Street Lights During Time Of Repairs With Energy Consumption Data Recording For Analysis And Lcd Display For Energy Monitoring With Numeric Key Pad In Provided Box Complete. 165 Street Light Control Panel Outdoor Type, For Three Phase 4 Wire System Having In Built Astronomical Adjustable Programmable Timer With Minimum 5 Years Battery Backup, 4 Pole Contactor Upto 60 A, With Maintenance Mode To Switch On Street Lights During Time Of Repairs With Energy Consumption Data Recording For Analysis And Lcd Display For Energy Monitoring With Numeric Key Pad In Provided Box Complete. 166 Spmcb 6A To 32A, B- Series 167 Spmcb 40A B- Series 168 Spmcb 63A B- Series 169 Spmcb 100A B- Series 170 Spmcb 200A B- Series 171 Dpmcb 40A To 63A, B- Series 172 Spn Mcb 6A To 32A, B- Series 173 Spn Mcb 40A, B-Series 174 Spn Mcb 63A, B-Series 175 Spn Mcb 100A, B-Series 176 Spn Mcb 200A, B-Series 177 Tpmcb 40A To 63A 178 Fpmcb 40A To 63A 179 Double Pole Isolator Only Switch Versionof Miniature Circuit Breakerof40a 180 Double Pole Isolator Only Switch Versionof Miniature Circuit Breakerof63a 181 Triplepoleisolatorsonlyswitch Versionofminiaturecircuitbreaker Of 40A 182 Triple Pole Isolators Only Switch Version Of Miniature Circuit Breaker Of 63A 183 Triple Pole Isolators Only Switch Version Of Miniature Circuit Breaker Of 100A 184 Four Pole Isolators Only Switch Version Of Miniature Circuit Breakers Of 40A 185 Four Pole Isolators Only Switch Version Of Miniature Circuit Breakers Of 63A 186 Four Pole Isolators Only Switch Version Of Miniature Circuit Breakers Of 80 / 100A 187 Triplepole And Neutral Distribution Board ( Tpndb ) Surface / Flushmounted Suitable For Spmcb Of 12 Wayson Iron / Gi Frame 188 Triplepole And Neutral Distribution Board ( Tpndb ) Surface / Flushmounted Suitable For Spmcb Of 24 Ways On Iron / Gi Frame 189 Single Pole And Neutral Distributionboard ( Spndb ) Surface / Flush Mounted With 2 Waysfor Incoming And 6 Ways For Outgoing Sp Mcb’Son Iron / Gi Frame 190 Single Pole And Neutral Distributionboard ( Spndb ) Surface / Flush Mounted With 2 Waysfor Incoming And 10 Ways For Outgoing Sp Mcb’Son Iron / Gi Frame 191 3 Pole Mccb Upto 100A, 415V, With Short Circuitrating 25 Ka ( Ics=100% Of Icu ) , Adjustablethermal ( Overload ) Setting And Fixed Magnetic Setting With Provided Leads, Provision For Installation Of Shunt / Uv / Trip Alarm Contact And Mccb Should Have Phase Barriers Both Sides, In Provided Enclosure On Iron / Gi Frame 192 3 Pole Mccb Of 200A, 415V Capacity With Short Circuit Rating 25 Ka ( Ics=100% Of Icu ) Adjustablethermal ( Overload ) Setting And Fixed Magnetic Setting With Provided Leads, Provision For Installation Of Shunt / Uv / Trip Alarm Contact And Mccb Should Have Phase Barriers Both Sides, In Provided Enclosure On Iron / Gi Frame 193 3 Pole Mccb Of 250A, 415V Capacity With Short Circuit Rating 36 Ka ( Ics=100% Of Icu ) Adjustablethermal ( Overload ) Setting And Fixed Magnetic Setting With Provided Leads, Provision For Installation Of Shunt / Uv / Trip Alarm Contact And Mccb Should Have Phase Barriers Both Sides, In Provided Enclosure On Iron / Gi Frame 194 2 Polerccb Only Ofelectromagnetictype With 30 / 100 / 300 Ma Sensitivity And Having Capacity Of 16 / 25A Complete As Per Specification No. Sw-Rccb / Rccb 195 1 Pole Rccb 63A 196 2 Pole Rccb 100A 197 3 Pole Rccb 200A 198 2 Pole Rccb 40A 199 3 Pole Rccb 63A 200 4 Pole Rccb40a 201 4 Pole Rccb63a 202 4 Pole Rccb80a 203 4 Pole Rccb100a 204 Floor / Wall Mounting, Mccb Panel Board With Door Suitable For Four Pole Incoming 250A, 2 Waysfour Pole Outgoingupto 100 A MccbS On Iron Frame 205 Floor / Wall Mounting, Mccb Panel Board With Door Suitable For Four Pole Incoming 250A, 4 Waysfour Pole Outgoing Upto 100 A MccbS Oniron Frame 206 Iiron Clad Cut Out Of Hc Type 415V 16A 207 Iiron Clad Cut Out Of Hc Type 415V 32A 208 Iiron Clad Cut Out Of Hc Type 415V 63A 209 Iiron Clad Cut Out Of Hc Type 415V 100A 210 Iiron Clad Cut Out Of Hc Type 415V 200A 211 Metal Work In Crca Sheet With Fabrication Ofboxes, Panelboards, Etc. Including Cutting, Bending, Drilling, Welding, Riveting, Treated With Anti-Rust Treatment Andduly Powder Coated Or Paintedwith One Coat Of Red Lead Paint And 2 Coats Of Enamel Paint Complete. 212 Gi Sheet 1.25 Mm ( 18 Swg ) Tobeused For Fabricationofboxespanelboardsetc. Including Cutting, Bending, Drilling, Welding, Riveting Etc. And Paintingwithone Coat Of Red Leadpaint And 2 Coats Of Enamel Paint. 213 Gi Sheet 1 Mm ( 20 Swg ) Tobeused For Fabricationofboxespanelboardsetc. Including Cutting, Bending, Drilling, Welding, Riveting Etc. And Paintingwithone Coat Of Red Leadpaint And 2 Coats Of Enamel Paint. 214 Hylam Sheet / Ebonite 6 Mm Thickfor Covering Wall Entries Including Cutting, Drilling And Fixing With Nut Bolts / Screws Etc. Complete. 215 Plywood 12 Mm Thick Fixed To Wall Or On Provided Panel Board With Necessary Materials Such As Screws, Wall Fasteners Supports, Nuts Bolts Etc. Complete. 216 Iron, Sheet Metal Work Consisting Of Crcasheets, Varioussectionsofiron, Plates, Chequeredplates, Rods, Bars, Mspipes, Etc. Forpanel Board Or Any Other Purpose With Bending, Cutting, Drilling And Welding Completeerectedatthepositionwith Necessarymaterialsdulypaintedwith One Coat Of Red Oxide And Two Coats Of Enamelpaint To Match The Switchgears Or As Per Directions By The Authority. 217 Self-Locking Arrangement With Keys In Duplicate 218 Bus Bar Chamber Triple Pole With Neutral With Four Aluminium Bars, 500V, 100A 219 Bus Bar Chamber Triple Pole With Neutral With Four Aluminium Bars, 500V 200A 220 Bus Bar Chamber Triple Pole With Neutral With Four Copper Bars, 500V, 100A 221 Bus Bar Chamber Triple Pole With Neutral With Four Copper Bars, 500V 200A 222 Supplying & Erecting G.I. Pipe‘A’ Class 40 Mmdia.Erectedfor Enclosingxlpearmouredcable On Wall / Poleas Per Specification No. Cb-Ce 223 Supplying Andlaying ( Including Excavation Of Suitable Width & Depth Up To 90 Cm ) 50 Mmoutside Dia. Double Wall Corrugatedpipes ( Dwc ) Ofhdpe For Enclosing Cable Below Ground / Road Surface, To Required Depth Complete. 224 Xlpe Armoured Cable 2 Core 6Sq. Mm. Aluminium Conductor Withcontinuous 225 Xlpe Armoured Cable 2 Core 10Sq. Mm. Aluminium Conductor 226 Xlpe Armoured Cable 3½ Core70sq. Mm. Aluminium Conductor 227 Xlpe Armoured Cable 3½ Core120sq. Mm. Aluminiumconductor 228 Xlpe Armoured Cable3½ Core150sq. Mm. Aluminium 229 Xlpe Armoured Cable 4 Core10sq. Mm. Aluminium Conductor 230 Xple Armoured Cable 4 Core16sq. Mm. Aluminium Conductor 231 Xlpe Armoured Cable 4 Core25sq. Mm. Aluminium Conductor 232 Xlpe Armoured Cable 4 Core35sq. Mm. Aluminium Conductor 233 Xlpe Armoured Cable 2 Core4sq Mm Copper Conductor 234 Xlpe Armoured Cable 2 Core6sq. Mm. Copper Conductor 235 Xlpe Armoured Cable 3 Core6sq. Mm. Copperconductor 236 Xlpe Armoured Cable 3 Core10sq. Mm. Copperconductor 237 70 Sq. Mm A .B. Cable 238 90 Sq. Mm A .B. Cable 239 Suspention Clamp For Ab Cable 240 Lt Distribution Box 241 Steeltubular Swaged Pole 139.7 X 114.3 X 88.9 Mm. Dia With 4.5X3.65X3.25 Mm Thickness ( 4.5 + 1.75 + 1.75 M ) Length Respectively And Total 8 M Long With Pole Cap, Base Plate In Provided Foundation. ( Weight 101 Kg. ) 242 Steeltubular Swaged Pole 139.7 X 114.3 X 88.9 Mm. Dia With 4.5X3.65X3.25 Mm Thickness ( 5 + 1.75 + 1.75 M ) Length Respectively And Total 8.5 M Long With Pole Cap, Base Plate In Provided Foundation. ( Weight 109 Kg. ) 243 Steel Tubular Swagedpole 165.1 X 139.7 X 114.3 Mm.Dia With4.5 X 4.5 X 3.65 Mm Thickness ( 5 + 2 + 2M ) Length Respectivelyandtotal9 M Long With Pole Cap, Base Plate In Provided Foundation ( Weight 147 Kg ) 244 Rolledsteel Joist ( Girder ) Pole 150 X 80 Mm / 150 X75 Mm ( 14.9 Kg / M ) With Provided Base Plate In Provided Foundation As Per Specification No. Oh-Pl / Rsj 245 Rolledsteel Joist ( Girder ) Pole125 X 70 Mm ( 13.3 Kg / M ) With Provided Base Plate In Provided Foundation 246 G.I. Pipepole ‘B’ Grade80 Mm Dia 6 M Longwith Pole Cap, Base Plate In Provided Foundation 247 M.S. Pipe Pole ‘B’ Grade80 Mm Dia 6 M Longwith Pole Cap, Base Plate In Provided Foundation 248 12.5 M ( Clear Height ) High Mast ( Top-150Mm, Bottom- 360Mm ) With Lowering And Raising Motorized Unit, Lantern Carriage Assembly Suitable For Max. 6 Nos. Luminaries And Its Control Gear Box, Lightning Finial Arrangement For Fixing Aviation Light And Foundation Bolts On Provided Foundation 249 9M ( Clear Height ) Fixed Type High Mast ( Top-100Mm, Bottom- 200Mm ) With Hexagonal / Round Bracket And Foundation Bolts Suitable For Max. 4 Nos Floodlight Fixtures On Provided Foundation 250 12.5M ( Clear Height ) Fixed Type High Mast ( Top-110Mm, Bottom- 242 Mm ) With Hexagonal / Round Bracket And Foundation Bolts Suitable For Max. 6 Nos Floodlight Fixtures On Provided Foundation 251 6 M High ( Clear Height ) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 130 Mm A / F, Top 70 Mm A / F On Provided Foundation 252 7 M High ( Clear Height ) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 130 Mm A / F, Top 70 Mm A / F On Provided Foundation 253 9 M High ( Clear Height ) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 155 Mm A / F, Top 70 Mm A / F On Provided Foundation 254 6 M High Galvanised Conical Pole With Foundation Bolts Having Bottom Dia. From 135 To 160 Mm, Top Dia. From 65 To 75 Mm On Provided Foundation 255 Providing & Erecting 9 M High Galvanised Conical Pole With Foundation Bolts Having Bottom Dia. From 165 To 200 Mm, Top Dia. From 65 To 75 Mm On Provided Foundation As Per Specification No.Oh-Pl / Cpl 256 Galvanised 1000Mm Single Arm Sword Type Bracket 257 Galvanised 1000Mm Double Arm Sword Type Bracket 258 Outdoor Stand Mounted Feeder Pillar For Highmast Of The Same Manufacturer With 32A Tpn Mcb Incomer, Single Dial Timer Switch, 25A Tp Contactor For Automatic Switching Of Luminaries, 2 Nos 9A Contactors And Raise / Lower Push Button, And Provision For Termination Of Adequate Size Of Incoming And Outgoing Cables Erected In Min. 14 Swg Crca Sheet Box With Supporting Angles, Self-Lock, Gasket And Slanting Top Erected With Cc Foundation Complete. 259 Outdoor Stand Mounted Feeder Pillar For Highmast Of The Same Manufacturerwith 63A Tpn Mcb Incomer, Single Dial Timer Switch, 45A Tp Contactor For Automatic Switching Of Luminaries, 2 Nos 9A Contactors And Raise / Lower Push Button, And Provision For Termination Of Adequate Size Of Incoming And Outgoing Cables Erected In Min. 14 Swg Crca Sheet Box Powder Coatedwith Supporting Angles, Self-Lock, Gasket And Slanting Top Erected With Cc Foundation Complete . 260 Ms Pole Bracket For Guarding / Lt Oh Line, Fabricated From Angle Iron 50X50x6 Mm And 550 Mm Long For Necessary Nos. Of Provided Insulators And Erecting On Pole With 50X6mm Clampcomplete 261 Ms Pole Bracket For Guarding / Lt Oh Line, Fabricated From Angle Iron 50X50x6 Mm And 1100Mm Long For Necessary Nos. Of Provided Insulators And Erecting On Pole With 50X6mm Clampcomplete 262 Ms Pole Bracket For Guarding / Lt Oh Line Fabricated From Ism Channel 75X40x6mm And 550 Mm Longfor Necessary Nos. Of Provided Insulators And Erecting On Pole With 50X6mm Clampcomplete 263 Ms Pole Bracket For Guarding / Lt Oh Line Fabricated From Ism Channel 75X40x6mm And 1100 Mm Long For Necessary Nos. Of Provided Insulators And Erecting On Pole With 50X6mm Clamp As Per Approved Method Of Construction And Complete 264 Ms Pole Bracket For Lt Oh Conductor Fabricatedfrom65x65x6 Mm Section, 550 Mm Long For Necessary Nos. Of Provided Insulators And Erecting On Pole With 50X6 Mm Clamp As Per Approved Method Of Construction And Complete 265 Ms Pole Bracket For Lt Oh Conductor Fabricatedfrom65x65x6 Mm Section, 1100 Mm Long For Necessary Nos. Of Provided Insulators And Erecting On Pole With 50X6 Mm Clamp As Per Approved Method Of Construction And Complete 266 Ms Pole Bracket, For Oh Conductor Fabricated From Ism Channel, 75X40x6mm 550Mm Long For2 Insulators And Erecting On Pole With 50X6 Mm Clamp As Per Approved Method Of Construction And Complete 267 Ms Pole Bracket, For Oh Conductor Fabricated From Ism Channel, 75X40x6mm1100mm Long For 4 Insulators And Erecting On Pole With 50X6 Mm Clamp As Per Approved Method Of Construction And Complete 268 Aluminium Stranded Conductors 7 / 2.21Mm Complete. ( Gnat ) ( 73.77Kg / Km ) 269 Aluminium Stranded Conductors 7 / 3.10Mm. Complete. ( Ant. ) ( 145.0 Kg / Km ) 270 Porcelain Shackle Type Lt Medium Insulator 271 Providing And Fixing G.I. Earthing Stud With Necessary Materials. 272 G.I. Stay Set For Poles, Including Loopinsulatorsat Inaccessible Height Complete With Anchor Plate300x300x6mm., Strainingscrews, G.I.Stay Wire 7 / 10 Swg, G.L. Stay Rod 20 Mm X 1.8 M Length And Poleclamps Duly Erected In Provided Cement Concrete Foundation. 273 Fibre / Pvc Spacers For Lt Overhead Line 3 To 5 Conductors Complete Erected. 274 ‘D’ Type Pole Clamps 275 C Type ( Half ) Clamps 276 Ms Base Plate 30X30x0.6 Cm Sizefixed To The Pole Base Either By Welding Or By Set Screws 12 Mm. Dia Fixed At Position. 277 Mspole Cap Fabricated From Ms Pipe Or Cast Iron Fixedto Pole By Means Of Set Screws And 75 Mm Deep. 278 G.I. Stay Wire 7 / 10 Swg 279 G.I. Bare Wire 8 Swg 280 Providing Earthing With Copper Earth Plate Size 30 X 30 X 0.315 Cm Complete With All Materials, Testing & Recording The Results Asper Specification No. Ea-Ep 281 Providingpipetype Earthing With 40Mm. Dia. G.L. Pipe Or 20 Mm Dia. G.L. Rodcomplete With All Materials As Per Specification No. Ea-Ep 282 Aluminium Strip Of Required Sizes Used For Earthing On Wall And / Or Any Other Purpose With Necessaryaluminiumclampsfixed On Wall Painted With Bituminous Paint In An Approved Manner With Joints Required. As Per Specification No Ea-Ep. 283 Copper Strip Of Required Size Used For Earthing On Wall And / Or Any Other Purpose With Necessarycopperclampsfixed On Wall Painted With Bituminous Paint In An Approved Manner With Joints Required. 284 Gi Earth Wire Of High Purity Of Different Sizes Used For Earthing Or Any Other Purposes On Wall With Necessary G. I. Clamps Fixed On Wall / Cable / Conduit With Screws In An Approved Manner. 285 Providing And Back Filling Back Filling Ground Enhancing Compound 25 Kg Bag Complete. 286 Supplying And Erecting D. O. L. Starter Suitable For 250V. Single Phase, 50 Cycles With Overload Element With Necessary Materials And Connected To Supply Upto 3 H.P. 287 Supplying And Erecting D.O.L. Starter 400V. 3 Phase, 50 Cycles With No Volt Coil And Overload Element With Necessary Materials And Connected To Supply Upto 7.5 H.P. 288 Fully Automatic Star / Delta Starter Suitable For 12.5 H.P. To 15 H.P. For 3 Phase Squirrel Cage Motor Totally Enclosed With Overload And No Volt Relay Complete Erected On Provided Angle Iron Frame. 289 Fully Automatic Star / Delta Starter Suitable For Above 15 H.P. Upto 25 H.P. Squirrel Cage Motor Totally Enclosed With Overload And No Volt Relay Complete Erected On Provided Angle Iron Frame. 290 Fully Automatic Star / Delta Starter Suitable For Above 25 H. P. To 35 H. P. Squirrel Cage Motor Totally Enclosed With Overload And No Volt Relay Complete Erected On Provided Angle Iron Frame. 291 Pump Protection Relay Comprising Current Sensing Phase Failure And Uv+Ov Relay With Dry Run And Overload Protection Suitable For 3 Phase Pumps. 292 Flat Flexible 3 Core 6 Sq Mm Pvc Sheathed Submersible Type Copper Cable Suitably Clamped At Fixed Intervals With Column Pipe Assembly Complete. 293 Flat Flexible 3 Core 10Sq.Mm Pvc Sheathed Submersible Type Copper Cable Suitably Clamped At Fixed Intervals With Coloum Pipe Assembly Complete. 294 Automatic Control Panel For 3 Ph, 415 Volt, A.C. Submersible / Centrifugal Pump Set Upto 7.5 Hp Consisting Of Dol Starter Having Relay Range 9-14 Amp, S.P.P., Combined Ammeter / Voltmeter, Phase Indicating Lamp Enclosed In Crca Powder Coated Vibration Proof Enclosurewith Ip 54 Protection. Control Panel Should Offer Single Phasing, Phase Reversal, Phase Imbalance Etc 295 Automatic Control Panel For 3 Ph, 415 Volt, A.C. Submersible / Centrifugal Pump Set For 7.5 To 10 Hp Consisting Of Dol Starter Having Relay Range 13-21 Amp, S.P.P., Combined Ammeter / Voltmeter, Phase Indicating Lamp Enclosed In Crca Powder Coated Vibration Proof Enclosure With Ip 54 Protection. Control Panel Should Offer Single Phasing, Phase Reversal, Phase Imbalance Etc 296 Making Cement Concrete Foundation Including Excavation ( 45X 45X 120 ) Cm Deep In 1:3:6 Cement Concrete, 20 To 25 Mm Stone Metal, ( 45X 45X 45 ) Cm / 45 Cm Dia. X 45 Cm Height Plinth Duly Plastered, With Necessary Curing And Finishing Complete. ( For 6 M Pole ) 297 Making Cement Concrete Foundation Including Excavation ( 60X 60 X 150 ) Cm Deep In 1:3:6 Cement Concrete 20 X 25 Mm Stone Metal, ( 45X 45X 45 ) Cm / 45 Cm Dia. X 45 Cm Height Plinth Duly Plastered, With Necessary Curing And Finishing Complete. ( Above 6 M To 9 M Poles ) 298 Makingcement Concrete Foundation Including Excavation ( 60 X 60 ) Cm X Deep 1 / 6 Of Pole Length In 1:3:6 Cement Concrete 20 X 25 Mm Stone Metal, 45 Cm X 45 Cm X 45 Cm / 45 Cm Dia. X 45 Cm. Height Plinth Duly Plastered, With Necessary Curing And Finishing Complete. ( For Above 9 M Poles ) 299 Making Cement Concrete Foundation Including Excavation ( 60X 60X 150 ) Cm Deep In 1:3:6 Cement Concrete, ( 20 To 25 ) Mm Stone Metalwith Necessary Curing And Finishing Complete. ( For Stay ) . 300 Making Cement Concretefoundationin 1:3:6 Cement Concrete, ( 20 To 25 ) Mm. Stone Metal Duly Plastered With Necessary Curing Forcomplete. ( Pole Muffing Or Any Other Purpose ) . 301 Making M- 20 Grade Reinforced Cement Concretefoundation By Considering The Safe Soil Bearing Capacityas 10 T / Sq.M At 1.5 M Depth Including Supply Of Steel, Concrete, Excavation, Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete ( For 3 To 5M Octagonal / Conical Gi Pole ) . 302 Makingm- 20 Grade Reinforced Cement Concretefoundation By Considering The Safe Soil Bearing Capacity At Site As 10 T / Sq.Mat 1.5 M Depth Including Supply Of Steel, Concrete, Excavation And Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete ( For 6M To 8M High Octagonal / Conical Gi Pole ) . 303 Makingm- 20 Grade Reinforced Cement Concretefoundation Byconsidering The Safe Soil Bearing Capacity At Site As 10 T / Sq.Mat 1.5 M Depth Including Supply Of Steel, Concrete, Excavation And Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete ( For 9M & 10M High Octagonal / Conical Gi Pole ) . 304 Makingm- 20 Grade Reinforced Cement Concretefoundation By Considering The Safe Soil Bearing Capacity At Site As 10 T / Sq. M At 1.5 M Depth Including Supply Of Steel, Concrete, Excavation And Fixing Provided Nut Bolts With The Help Oftemplate, Duly Plastered As Per Design Complete ( For 11M & 12.5M High Octagonal / Conical Gi Pole ) . 305 Making M- 20 Cement Concrete Foundation By Considering The Safe Soil Bearing Capacity At Site As 10 T / Sq. M At 2 M Depth Including Excavation And Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete ( For 12.5 M Raising Lowering High Mast ) . 306 Spray Painting The Table Fan / Pedestal Fan / Cabin Fan / Ceiling Fan / Exhaust Fan Including Guards Etc By Scrapping The Existing Paint Complete. Specification No. Cw-Ptg / Ptf. 307 Painting Of Pipe Pole Upto 6 M Length Along With Street Light / Pole Brackets / Clamps Etc By Scrapping The Existing Paint Complete. Specification No Cw -Ptg / Ptp. 308 Painting Of Steel Tubular / Rail / Rsj Pole Above 6.0 M Length Along With Street Light Pole Brackets, Clamps Etc By Scrapping The Existing Paint Complete. Specification No Cw -Ptg / Ptp. 309 Labour Charges For Internal Wiring Of Fider Piller / Panel. 310 3 Terminal Earth Resistance Tester 311 Tong Tester 312 L N Key Set

BOQ

Name of Work: Supply of electrical materials to Nagar Parishad Savner as per requirement and demand for the year 2024-25.
Sl. No. Item Description
1Electrical Material List.
2H.M.S. P.V.C. conduit 25 mm. dia.
3H.M.S. P.V.C. conduit 32 mm. dia.
4UPVC reinforcedflexible conduit 25 mm in dia.
5UPVC reinforcedflexible conduit 32 mm in dia.
6PVCtrunking (PVC casing-n-capping)ofsize25 mm
7PVCtrunking (PVC casing-n-capping)ofsize32 mm
8PVCboxtrunking ofsize50x50 mm
9UPVC gland/ adaptor suitable for 20 mm
10UPVC gland/ adaptor suitable for 25 mm
11UPVC gland/ adaptor suitable for 31/32 mm
122x1.5 sq.mm FRLSHcopperPVC insulated wire
132x2.5 sq.mm FRLSHcopperPVC insulated wire
142x4 sq.mm FRLSHcopperPVC insulated wire
152x6 sq.mm FRLSHcopperPVC insulated wire
161x4 sq.mm FRLSHcopperPVC insulated wire
171x6 sq.mm FRLSHcopperPVC insulated wire
183x4 sq.mm FRcopper PVC insulated wire
193x6 sq.mm FRcopper PVC insulated wire
202*4 sq. mm .Service Wire
212*6 sq. mm .Service Wire
22PVC insulated PVC round sheathed 4 sq.mm 3 core flexible multi strandedcopper cable
23Modular type switch 6A
24Modular type switch 16A
25Modular type bell-push 6A
26Modular type D.P. switch 32A
27Modular type 3 pin 6A multi sockets with safety shutter
28Modular type 3 pin 16A multi sockets with safety shutter
29Modular type buzzer 220 / 250V
30Modular type electronic step regulator for fan.
31Modular type blanking plate one module
32PVC Surface modular switch box with double mounting plate for 2 modules.
33PVC Surface modular switch box with double mounting plate for 3 modules
34PVC Surface modular switch box with double mounting plate for 4 modules
35PVC Surface modular switch box with double mounting plate for 6 modules
36SPVC Surface modular switch box with double mounting & front plate for 8 modules
37PVC Surface modular switch box with double mounting plate for 12 modules
38PVC Surface modular switch box with double mounting plate for 16 / 18 module.
3916 / 20 / 25 A starter (modular range) 2 module
406 to 32 A SPMCB suitable to fix in 1 module
41Modular type USB Charger socket
42Point wiring for light/fan/bell in20 mm ISI marked HMS PVC conduit
43Point wiring for independent plug
44Extention Board 6 Amp
45LED square / circular 5 to 8W down light
46LED square / circular 9 to 12W down light
47LED square / circular 13 to 15W down light
48LED square / circular 16 to 20W down light
49square shaped CRCA /die-cast aluminium powder coatedhousing LED panel light (slim edge-lit) suitable for upto 8 W
50square shaped CRCA /die-cast aluminium powder coatedhousing LED panel light (slim edge-lit) suitable for 9 W - 12 W
51square / round shaped CRCA /die-cast aluminium powder coatedhousing LED panel ( slim edge-lit) light suitable for 13W to18W
52CRCA /die-cast aluminium powder coatedhousing LED panel light (slim edge-lit) square / round shape suitable for 19 to 24 W
53LED flexible strip light 5m length upto 25W
54LED flexible strip light 5m length upto 75W
55Bulk head edge-lit 10W LED
56LED 18-20W tube light fitting (4 feet)
57LED Mirror Light with integrated driver including 14W to 18W lamp
580.5W, 230V integral type LED Lamp
59Pigmy /candle lamp 100Watt
607W, 230V integral type LED Lamp.
6112W, 230V integral type LED Lamp.
6218W, 230V integral type LED Lamp.
6318W LED Charging Lamp.
6422W LED Charging Lamp.
65Ding dong / electronic musical type call bell with heavy duty coil.
66Electronic Type cordlesscallbell
67Condenser 4 microfarad
68LED Street light fitting suitable forabove 50W lamp, including lamp, with PF >0.95class IP65.
69LED street light fitting suitable for60W lamp, including lamp, with PF >0.95 class IP65
70LED street light fitting suitable for above 75W lamp, including lamp, with PF >0.95 class IP65
71LED street light fitting 100W, including lamp, with PF >0.95 class IP65
72LED street light fitting 120 W, including lamp, with PF > 0.95 class IP65
73LED street light fitting 150 W, including lamp, with PF > 0.95 class IP 65
74LED Flood light fitting of 100W, including lamp, with PF >0.95, class IP65
75LED Flood light fitting of 120W, including lamp, with PF >0.95,class IP 65
76LED Flood light fitting of 150W, including lamp, with PF >0.95,class IP 65
77LED Flood light fitting of 200W, including lamp, with PF >0.95,class IP 65
78Gate/garden light fitting with 200mm dia. glass bowl suitable for upto 12W LED lamp on provided pipe
79Gate/garden light fitting with 300mm dia. glass bowl suitable for upto 12W LED lamp on provided pipe
80Integral post top lantern fixtures (mushroom type) suitable for LED lamp upto 12 W
81Highbay LED fitting IP 65 with lamp 70W-80W
82Street light bracket made from 25 mm. dia ‘B’ class G.I. Pipe, 0.6 m in length
83Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length
84Street light Wall bracket made from 25 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete
85Street light Wall bracket made from 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete
86Driver for Outdoor LED fittings25W
87Driver for Outdoor LED fittings 45W
88Driver for Outdoor LED fittings 50W
89Driver for Outdoor LED fittings 75W
90Driver for Outdoor LED fittings 100W
91Driver for Outdoor LED fittings 150W
92Driver for Outdoor LED fittings 200W
93PCB for Outdoor LED fittings25W
94PCB for Outdoor LED fittings 45W
95PCB for Outdoor LED fittings 50W
96PCB for Outdoor LED fittings 75W
97PCB for Outdoor LED fittings 100W
98PCB for Outdoor LED fittings 150W
99PCB for Outdoor LED fittings 200W
100Outdoor LED fitting Protector 25W - 200W
101metal cawl 300 mm
102metal cawl 400 mm
103Storage type horizontal / vertical water heater 15 litres capacity with BEE 5 star ratinghigh impact resistance engineering plastic body
104Storage / pressure type horizontal / vertical water heater 25 litres with BEE 5 star rating of mild steel body.
105Regular/ standard model ceiling fan of 1200mm. sweep complete erected in position as per specification no. FG-FN/CF
106Five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF
107Supplying condenser 2.5 micro farad for ceiling fan
108Cabin fan of A.C. 230 V. 50 cycles 250 mm. /300 mm. sweep complete with necessary brackets for fixing cabin fans, wire etc.
109Cabin fan of A.C. 230 V. 50 cycles 400 mm. sweep complete with necessary brackets for fixing cabin fans, wire etc.
110Fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.
111Air cooler (desert cooler) with galvanised steel body 230/250 Volts, 50 cycles, normal cooling capacity of 50 cu.m per minute, with 12\" exhaust, minimum 40 to 55 litre water capacity tank complete.
112Air cooler (desert cooler) with galvanised steel body 230/250 Volts, 50 cycles, normal cooling capacity of 60 to 70 cu.m per minute with 15\" exhaust fan, minimum 68 litre water capacity tank complete.
113Air cooler (desert cooler) with galvanised steel body 230/250 Volts, 50 cycles, normal cooling capacity of 80 cu.m per minute with 18\" exhaust fan, minimum 75 to 80 litre water capacity tank complete.
114Split type variable speed Inverter technology room Air conditioning unit 2 TR capacity
115Split type variable speed Inverter technology room Air conditioning unit 1.5 TR Capacity
116Split type variable speed inverter technology room Airconditioning unit 1 TR capacity
117Sun control film on glass to achieve better cooling effect having 1.5 / 2 mm thickness, ultra violet transmittance less than 2% and solar heat rejection 78% in approved manner.
118Split typeroom Air conditioning unit with variable speed Inverter technology 2.5 TR capacity
119Soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 12 mm complete.
120Soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 22 mm complete.
121Cassette type variable speed inverter technology split room airconditioning unit 2 TR capacity
122Cassette type variable speed inverter technology split room air conditioning unit 3 TR capacity
123Tower type room air conditioning unit of 2.5 TR capacity
124Self-contained water cooler 230/250 V 50 cycles nominal cooling capacity of 80 litres/hr and storage capacity 120 litres
125Self contained water cooler 230/250 Volts 50 cycles nominal cooling capacity of 150 liters/hr and storage capacity 150 liters
126fully comprehensive annual maintenance service for 80/120/150 ltr. water cooler
127Ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water 7 to 8 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply.
1281400 VA Digital pure sine waveinverter based on Insulated Gate Bipolar Transistor (IGBT) technology single phase 230V,50 Hz completeas per specification no.AP-INV (Without batteries)
1292500 VA Digital pure sine waveinverter based on Insulated Gate Bipolar Transistor (IGBT) technology single phase 230V,50 Hz completeas per specification no.AP-INV (Without batteries)
130On line UPS pure sine wave of 1 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins. battery backup, as per specification no. AP-UPS
131On line UPSpure sine wave of 5 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup,as per specification no. AP-UPS
13212 V/100Ah tubular battery with battery terminal wire, duly charged complete with 36 months warranty complete
13312 V/150Ahtubular battery with battery terminal wire, duly charged complete with 36 months warranty complete
134Fully automatic line voltage stabilizer buck and boost type for operation on inputvoltage 160 to 270 V and output voltage 200 to 250 V rated for 0.5 kVA maximum load and with voltmeter, selector switch, 6A/16A flush type 3 pin socket for output and with 3 core flexible cord and 3 pin 6/16 A plug top suitable for refrigerator for continuous operation.
135Solar panel comprising high efficiency poly-crystalline / multi crystalline photovoltaic cell 100Wp, 12V
136Solar panel comprising high efficiency poly-crystalline / multi crystalline photovoltaic cell 250Wp, 24V
137Solar panel comprising high efficiency poly-crystalline / multi crystalline photovoltaic cell 300Wp, 24V with necessary clamps and module frame on existing structure complete. Specification no. ESD-SOL/CELL
138Battery with capacity of 12 V- 40 Ah with duty cycle 10-12 hrs suitable to charge on PV cell with necessary wiring connections erected in powder coated protection box with stand and nut bolts complete.
139Battery with capacity of 12 V- 75 Ah with duty cycle 10-12 hrs suitable to charge on PV cell with necessary wiring connections erected in powder coated protection box with stand and nut bolts complete
140Battery with capacity of 12 V- 150 Ah with duty cycle 10-12 hrs suitable to charge on PV cell with necessary wiring connections erected in powder coated protection box with stand and nut bolts complete.
141Solar street light pole comprising of 12W x 2 nos. LED fittings, 12V min. 100Ah maintenance free lithium battery, min. 120Wp SPV module, MS powder coated battery box weather proof, mounted on 75/80 mm dia. B-Grade GI pole of 6 m. height along with brackets, foundation, earthling and necessary accessories complete.
142Four pole power contactor 430 V, 40 A for time switch complete erected on provided wooden block/ box, with necessary materials.
143Programmable digital almanac timer microcontroller based
14411 kWp off grid solar power pack with GI mounting structure and interconnecting wires / cables along with 24V/12V pure sine wave solar power inverter (THD<5%), 24V/12V charge controller and 24V/12V C-10 rated lead acid battery bank of required capacity and required SPV modules for battery backup of 3 hrs complete.
1451 kWp capacity on grid solar power pack with GI mounting structure and inter connecting wires / cables without battery bank SPV modules and solar power conditioning unit of required capacity complete
146Solar water pump of 1 HP capacity, DC surface type, 90000 LPD, total head 10m, comprising of 900 Wp PV array / submersible type (with controller) 42000 LPD, total head of 30m, comprising of 1200 Wp PV arraymounted on GI structure with necessary hardwarecomplete.
147Double pole metal clad switch with fuse and neutral link 240V, 16A on iron / GI frame
148Double pole metal clad switch with HC type fuse and neutral link 240V, 32A on iron / GI frame
149Double pole metal clad switch with HC type fuse 240V,63Aon iron / GI frame
150Triple pole metal clad switch and fuse 415V, 63A on angle iron / GI frame
151Triple pole metal clad switch and fuse 415V, 100A on angle iron / GI frame
152Triple pole metal clad rewireable fuse switch 415V, 200A on angle iron /GI frame
153Four polemetalcladON LOAD changeover switch 415V,63A erectedon angle iron / GI frame complete.
154Four pole metal clad ON LOAD change over switch 415V,100A erected on angle iron /GI frame complete.
155Four pole metal clad ON LOAD change over switch 415V, 200A erected on angle iron /GI frame approved make complete.
156ON LOAD four pole automatic transfer switch suitable for 415V, 100A, 50 Hz,capacitywith enclosure, automatic/manual inbuilt time delay, high transfer speed, excellent breaking capacity, superior making capacity, compact & light weight, erected on provided angle iron /GI frame
157ON LOAD four pole automatic transfer switch suitable for 415V, 200A, 50 Hz capacity with enclosure, automatic/manual inbuilt time delay, high transfer speed, excellent breaking capacity, superior making capacity, compact & light weight, erected on provided angle iron / GI frame
158Metal clad distribution board 240V, 4 way, 16A perway &neutral barconnector completeerectedoniron/GIframe
159Metal clad distribution board 240V, 6 way, 16A perway &neutral barconnector completeerectedoniron/ GI frame
160Metal clad distribution board 240V, 8 way, 16A perway &neutral barconnector completeerectedoniron / GI frame
161Street light control panelin powder coated CRCA 14/16 SWG sheet, outdoor type, single phase, 240 V consisted of suitable rating contactor, 24 hrs digital / astronomical time switch with minimum 5 years battery backup,SPN MCB 63 Aauto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc for automatic operation & overcurrent, short circuit, earth fault protection of street lights upto the max load of 12 Kw on provided iron frame / CC foundation complete.
162Street light control panelin powder coated CRCA 14/16 SWG sheet, outdoor type, three phase, 415Vconsisted of suitable rating contactor, 24 hrs digital/ astronomical time switch with minimum 5 years battery backup,TPN MCB 63 Aauto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc for automatic operation & overcurrent, short circuit, earth fault protection of street lights upto the max load of 12 kW on provided iron frame / CC foundation complete.
163Street light control panelin powder coated CRCA 14/16 SWG sheet, outdoor type, three phase, 415 V consisted of suitable rating contactor, 24 hrs digital/ astronomical time switch with minimum 5 years battery backup,TPN MCB 110 Aauto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc for automatic operation & overcurrent, short circuit, earth fault protection of street lights upto the max load of 12 kW on provided iron frame / CC foundation complete.
164Street light control panel outdoor type, for single phase 2 wire system having in built astronomical adjustable programmable timer with minimum 5 years battery backup, 2 pole contactor upto 60 A, with maintenance mode to switch ON street lights during time of repairs with energy consumption data recording for analysis and LCD display for energy monitoring with numeric key pad in provided box complete.
165Street light control panel outdoor type, for three phase 4 wire system having in built astronomical adjustable programmable timer with minimum 5 years battery backup, 4 pole contactor upto 60 A, with maintenance mode to switch ON street lights during time of repairs with energy consumption data recording for analysis and LCD display for energy monitoring with numeric key pad in provided box complete.
166SPMCB 6A to 32A, B- series
167SPMCB 40A B- series
168SPMCB 63A B- series
169SPMCB 100A B- series
170SPMCB 200A B- series
171DPMCB 40A to 63A, B- series
172SPN MCB 6A to 32A, B- series
173SPN MCB 40A, B-series
174SPN MCB 63A, B-series
175SPN MCB 100A, B-series
176SPN MCB 200A, B-series
177TPMCB 40A to 63A
178FPMCB 40A to 63A
179Double pole isolator only switch versionof miniature circuit breakerof40A
180Double pole isolator only switch versionof miniature circuit breakerof63A
181Triplepoleisolatorsonlyswitch versionofminiaturecircuitbreaker of 40A
182Triple pole isolators only switch version of miniature circuit breaker of 63A
183Triple pole isolators only switch version of miniature circuit breaker of 100A
184Four pole isolators only switch version of miniature circuit breakers of 40A
185Four pole isolators only switch version of miniature circuit breakers of 63A
186Four pole isolators only switch version of miniature circuit breakers of 80/100A
187Triplepole and neutral distribution board (TPNDB) surface/ flushmounted suitable for SPMCB of 12 wayson iron / GI frame
188Triplepole and neutral distribution board (TPNDB) surface/ flushmounted suitable for SPMCB of 24 ways on iron / GI frame
189Single pole and neutral distributionboard (SPNDB)surface/flush mounted with 2 waysfor incoming and 6 ways for outgoing SP MCB’son iron/ GI frame
190Single pole and neutral distributionboard (SPNDB)surface/flush mounted with 2 waysfor incoming and 10 ways for outgoing SP MCB’son iron/ GI frame
1913 Pole MCCB upto 100A, 415V,with short circuitrating 25 kA (Ics=100% of Icu ),adjustablethermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame
1923 Pole MCCB of 200A,415V capacity with short circuit rating 25 kA (Ics=100% of Icu)adjustablethermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame
1933 Pole MCCB of 250A,415V capacity with short circuit rating 36 kA (Ics=100% of Icu) adjustablethermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame
1942 poleRCCB only ofelectromagnetictype with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per specification no. SW-RCCB/RCCB
1951 pole RCCB 63A
1962 pole RCCB 100A
1973 pole RCCB 200A
1982 pole RCCB 40A
1993 pole RCCB 63A
2004 pole RCCB40A
2014 pole RCCB63A
2024 pole RCCB80A
2034 pole RCCB100A
204Floor / wall mounting, MCCB panel board with door suitable for four pole incoming 250A, 2 waysfour pole outgoingupto 100 A MCCB\"s on iron frame
205Floor / wall mounting, MCCB panel board with door suitable for four pole incoming 250A, 4 waysfour pole outgoing upto 100 A MCCB\"s oniron frame
206Iiron clad cut out of HC type 415V 16A
207Iiron clad cut out of HC type 415V 32A
208Iiron clad cut out of HC type 415V 63A
209Iiron clad cut out of HC type 415V 100A
210Iiron clad cut out of HC type 415V 200A
211Metal work in CRCA sheet with fabrication ofboxes,panelboards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment andduly powder coated or paintedwith one coat of red lead paint and 2 coats of enamel paint complete.
212GI sheet 1.25 mm (18 SWG)tobeused for fabricationofboxespanelboardsetc. including cutting, bending, drilling, welding, riveting etc. and paintingwithone coat of red leadpaint and 2 coats of enamel paint.
213GI sheet 1 mm (20 SWG)tobeused for fabricationofboxespanelboardsetc. including cutting, bending, drilling, welding, riveting etc. and paintingwithone coat of red leadpaint and 2 coats of enamel paint.
214Hylam sheet/ ebonite 6 mm thickfor covering wall entries including cutting, drilling and fixing with nut bolts / screws etc. complete.
215Plywood 12 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete.
216Iron, sheet metal work consisting of CRCAsheets, varioussectionsofiron,plates, chequeredplates,rods,bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority.
217Self-locking arrangement with keys in duplicate
218Bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A
219Bus bar chamber triple pole with neutral with four aluminium bars, 500V 200A
220Bus bar chamber triple pole with neutral with four copper bars, 500V, 100A
221Bus bar chamber triple pole with neutral with four copper bars, 500V 200A
222Supplying & erecting G.I. pipe‘A’ class 40 mmdia.erectedfor enclosingXLPEarmouredcable on wall/poleas per specification no. CB-CE
223Supplying andlaying (including excavation of suitable width & depth up to 90 cm) 50 mmoutside dia. double wall corrugatedpipes(DWC) ofHDPE for enclosing cable below ground/road surface, to required depth complete.
224XLPE armoured cable 2 core 6sq. mm. aluminium conductor withcontinuous
225XLPE armoured cable 2 core 10sq. mm. aluminium conductor
226XLPE armoured cable 3½ core70sq. mm. aluminium conductor
227XLPE armoured cable 3½ core120sq. mm. aluminiumconductor
228XLPE armoured cable3½ core150sq. mm. aluminium
229XLPE armoured cable 4 core10sq. mm. aluminium conductor
230XPLE armoured cable 4 core16sq. mm. aluminium conductor
231XLPE armoured cable 4 core25sq. mm. aluminium conductor
232XLPE armoured cable 4 core35sq. mm. aluminium conductor
233XLPE armoured cable 2 core4sq mm copper conductor
234XLPE armoured cable 2 core6sq. mm. copper conductor
235XLPE armoured cable 3 core6sq. mm. copperconductor
236XLPE armoured cable 3 core10sq. mm. copperconductor
23770 sq. mm A .B. Cable
23890 sq. mm A .B. Cable
239Suspention clamp for AB Cable
240LT Distribution Box
241Steeltubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75 m) length respectively and total 8 m long with pole cap, base plate in provided foundation.(weight 101 kg.)
242Steeltubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (5 + 1.75 + 1.75 m) length respectively and total 8.5 m long with pole cap, base plate in provided foundation.(weight 109 kg.)
243Steel tubular swagedpole 165.1 x 139.7 x 114.3 mm.dia with4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2m ) length respectivelyandtotal9 m long with pole cap, base plate in provided foundation (weight 147 kg)
244Rolledsteel joist(girder) pole 150 x 80 mm/150 x75 mm (14.9 kg /m) with provided base plate in provided foundation as per specification no. OH-PL/RSJ
245Rolledsteel joist(girder)pole125 x 70 mm (13.3 kg/m)with provided base plate in provided foundation
246G.I. pipepole ‘B’ grade80 mm dia 6 m longwith pole cap, base plate in provided foundation
247M.S. pipe pole ‘B’ grade80 mm dia 6 m longwith pole cap, base plate in provided foundation
24812.5 m (clear height) High Mast (Top-150mm, Bottom- 360mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 6 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation
2499m (clear height) fixed type High Mast (Top-100mm, Bottom- 200mm) with hexagonal/round bracket and foundation bolts suitable for max. 4 nos floodlight fixtures on provided foundation
25012.5m (clear height) Fixed type High Mast (Top-110mm, Bottom- 242 mm) with hexagonal/round bracket and foundation bolts suitable for max. 6 nos floodlight fixtures on provided foundation
2516 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation
2527 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation
2539 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 155 mm A/F, top 70 mm A/F on provided foundation
2546 m high galvanised conical pole with foundation bolts having bottom dia. from 135 to 160 mm, top dia. from 65 to 75 mm on provided foundation
255Providing & erecting 9 m high galvanised conical pole with foundation bolts having bottom dia. from 165 to 200 mm, top dia. from 65 to 75 mm on provided foundation as per specification no.OH-PL/CPL
256Galvanised 1000mm single arm sword type bracket
257Galvanised 1000mm double arm sword type bracket
258Outdoor stand mounted feeder pillar for highmast of the same manufacturer with 32A TPN MCB incomer, single dial timer switch, 25A TP contactor for automatic switching of luminaries, 2 nos 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables erected in min. 14 SWG CRCA sheet box with supporting angles, self-lock, gasket and slanting top erected with CC foundation complete.
259Outdoor Stand Mounted Feeder Pillar for highmast of the same manufacturerwith 63A TPN MCB incomer, single dial timer switch, 45A TP contactor for automatic switching of luminaries, 2 nos 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables erected in min. 14 SWG CRCA sheet box powder coatedwith supporting angles, self-lock, gasket and slanting top erected with CC foundation complete .
260MS pole bracket for guarding/LT OH Line, fabricated from angle iron 50x50x6 mm and 550 mm long for necessary nos. of provided insulators and erecting on pole with 50x6mm clampcomplete
261MS pole bracket for guarding/LT OH Line, fabricated from angle iron 50x50x6 mm and 1100mm long for necessary nos. of provided insulators and erecting on pole with 50x6mm clampcomplete
262MS pole bracket for guarding/LT OH Line fabricated from ISM channel 75x40x6mm and 550 mm longfor necessary nos. of provided insulators and erecting on pole with 50x6mm clampcomplete
263MS pole bracket for guarding/LT OH Line fabricated from ISM channel 75x40x6mm and 1100 mm long for necessary nos. of provided insulators and erecting on pole with 50x6mm clamp as per approved method of construction and complete
264MS pole bracket for LT OH conductor fabricatedfrom65x65x6 mm section, 550 mm long for necessary nos. of provided insulators and erecting on pole with 50x6 mm clamp as per approved method of construction and complete
265MS pole bracket for LT OH conductor fabricatedfrom65x65x6 mm section, 1100 mm long for necessary nos. of provided insulators and erecting on pole with 50x6 mm clamp as per approved method of construction and complete
266MS pole bracket, for OH conductor fabricated from ISM channel, 75x40x6mm 550mm long for2 insulators and erecting on pole with 50x6 mm clamp as per approved method of construction and complete
267MS pole bracket, for OH conductor fabricated from ISM channel, 75x40x6mm1100mm long for 4 insulators and erecting on pole with 50x6 mm clamp as per approved method of construction and complete
268Aluminium stranded conductors 7/2.21mm complete. (Gnat) (73.77kg/km)
269Aluminium stranded conductors 7/3.10mm. complete. (Ant.) (145.0 kg/km)
270Porcelain shackle type LT medium insulator
271Providing and fixing G.I. earthing stud with necessary materials.
272G.I. stay set for poles, including loopinsulatorsat inaccessible height complete with anchor plate300x300x6mm., strainingscrews,G.I.stay wire 7/10 SWG, G.l. stay rod 20 mm x 1.8 m length and poleclamps duly erected in provided cement concrete foundation.
273Fibre/ PVC spacers for LT overhead line 3 to 5 conductors complete erected.
274‘D’ type pole clamps
275\"C\" type (half) clamps
276MS base plate 30x30x0.6 cm sizefixed to the pole base either by welding or by set screws 12 mm. dia fixed at position.
277MSpole cap fabricated from MS pipe or cast iron fixedto pole by means of set screws and 75 mm deep.
278G.I. Stay wire 7/10 SWG
279G.I. Bare wire 8 SWG
280Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results asper specification no. EA-EP
281Providingpipetype earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rodcomplete with all materials as per specification no. EA-EP
282Aluminium strip of required sizes used for earthing on wall and/or any other purpose with necessaryaluminiumclampsfixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.
283Copper strip of required size used for earthing on wall and/or any other purpose with necessarycopperclampsfixed on wall painted with bituminous paint in an approved manner with joints required.
284GI earth wire of high purity of different sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws in an approved manner.
285Providing and Back filling back filling ground enhancing compound 25 kg bag complete.
286Supplying and erecting D. O. L. Starter suitable for 250V. single phase, 50 cycles with overload element with necessary materials and connected to supply upto 3 H.P.
287Supplying and erecting D.O.L. Starter 400V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply upto 7.5 H.P.
288Fully Automatic star/delta starter suitable for 12.5 H.P. to 15 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame.
289Fully Automatic star/delta starter suitable for above 15 H.P. upto 25 H.P. squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame.
290Fully Automatic star / delta starter suitable for above 25 H. P. to 35 H. P. squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame.
291Pump protection relay comprising current sensing phase failure and UV+OV relay with dry run and overload protection suitable for 3 phase pumps.
292Flat flexible 3 core 6 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.
293Flat flexible 3 core 10sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with coloum pipe assembly complete.
294Automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosurewith IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc
295Automatic control panel for 3 Ph, 415 volt, a.c. Submersible/centrifugal pump set for 7.5 to 10 HP consisting of DOL starter having relay range 13-21 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc
296Making cement concrete foundation including excavation ( 45x 45x 120 ) cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal, (45x 45x 45) cm / 45 cm dia. x 45 cm height plinth duly plastered,with necessary curing and finishing complete. (for 6 m pole)
297Making cement concrete foundation including excavation(60x 60 x 150) cm deep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45x 45x 45) cm /45 cm dia. x 45 cm height plinth duly plastered,with necessary curing and finishing complete. (above 6 m to 9 m poles)
298Makingcement concrete foundation including excavation(60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal,45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles)
299Making cement concrete foundation including excavation(60x 60x 150) cm deep in 1:3:6 cement concrete, (20 to 25) mm stone metalwith necessary curing and finishing complete.(for stay).
300Making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (pole muffing or any other purpose).
301Making M- 20 grade reinforced cement concretefoundation by considering the safe soil bearing capacityas 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole).
302MakingM- 20 grade reinforced cement concretefoundation by considering the safe soil bearing capacity at site as 10 T/sq.mat 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).
303MakingM- 20 grade reinforced cement concretefoundation byconsidering the safe soil bearing capacity at site as 10 T/sq.mat 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 9m & 10m high octagonal /conical GI pole).
304MakingM- 20 grade reinforced cement concretefoundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help oftemplate, duly plastered as per design complete ( for 11m & 12.5m high octagonal /conical GI pole).
305Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5 m raising lowering high mast).
306Spray painting the table fan / pedestal fan / cabin fan / ceiling fan / exhaust fan including guards etc by scrapping the existing paint complete. Specification no. CW-PTG/PTF.
307Painting of pipe pole upto 6 m length along with street light / pole brackets / clamps etc by scrapping the existing paint complete. Specification no CW -PTG/PTP.
308Painting of steel tubular / rail / RSJ pole above 6.0 m length along with street light pole brackets, clamps etc by scrapping the existing paint complete. Specification no CW -PTG/PTP.
309Labour charges for internal wiring of fider piller/ panel.
3103 terminal Earth resistance Tester
311Tong Tester
312L N key set

AI Tender Summary

OUR REF NO 41226907
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 29-12-2023
Authority
Authority Name Directorate Of Municipal Administration
Work Description Supply Of Electrical Material At Municipal Council Saoner.-2 H.M.S. P.V.C. Conduit 25 Mm. Dia. 3 H.M.S. P.V.C. Conduit 32 Mm. Dia. 4 Upvc Reinforcedflexible Conduit 25 Mm In Dia. 5 Upvc Reinforcedflexible Conduit 32 Mm In Dia. 6 Pvctrunking ( Pvc Casing-N-Capping ) Ofsize25 Mm 7 Pvctrunking ( Pvc Casing-N-Capping ) Ofsize32 Mm 8 Pvcboxtrunking Ofsize50x50 Mm 9 Upvc Gland / Adaptor Suitable For 20 Mm 10 Upvc Gland / Adaptor Suitable For 25 Mm 11 Upvc Gland / Adaptor Suitable For 31 / 32 Mm 12 2X1.5 Sq.Mm Frlshcopperpvc Insulated Wire 13 2X2.5 Sq.Mm Frlshcopperpvc Insulated Wire 14 2X4 Sq.Mm Frlshcopperpvc Insulated Wire 15 2X6 Sq.Mm Frlshcopperpvc Insulated Wire 16 1X4 Sq.Mm Frlshcopperpvc Insulated Wire 17 1X6 Sq.Mm Frlshcopperpvc Insulated Wire 18 3X4 Sq.Mm Frcopper Pvc Insulated Wire 19 3X6 Sq.Mm Frcopper Pvc Insulated Wire 20 2*4 Sq. Mm .Service Wire 21 2*6 Sq. Mm .Service Wire 22 Pvc Insulated Pvc Round Sheathed 4 Sq.Mm 3 Core Flexible Multi Strandedcopper Cable 23 Modular Type Switch 6A 24 Modular Type Switch 16A 25 Modular Type Bell-Push 6A 26 Modular Type D.P. Switch 32A 27 Modular Type 3 Pin 6A Multi Sockets With Safety Shutter 28 Modular Type 3 Pin 16A Multi Sockets With Safety Shutter 29 Modular Type Buzzer 220 / 250V 30 Modular Type Electronic Step Regulator For Fan. 31 Modular Type Blanking Plate One Module 32 Pvc Surface Modular Switch Box With Double Mounting Plate For 2 Modules. 33 Pvc Surface Modular Switch Box With Double Mounting Plate For 3 Modules 34 Pvc Surface Modular Switch Box With Double Mounting Plate For 4 Modules 35 Pvc Surface Modular Switch Box With Double Mounting Plate For 6 Modules 36 Spvc Surface Modular Switch Box With Double Mounting & Front Plate For 8 Modules 37 Pvc Surface Modular Switch Box With Double Mounting Plate For 12 Modules 38 Pvc Surface Modular Switch Box With Double Mounting Plate For 16 / 18 Module. 39 16 / 20 / 25 A Starter ( Modular Range ) 2 Module 40 6 To 32 A Spmcb Suitable To Fix In 1 Module 41 Modular Type Usb Charger Socket 42 Point Wiring For Light / Fan / Bell In20 Mm Isi Marked Hms Pvc Conduit 43 Point Wiring For Independent Plug 44 Extention Board 6 Amp 45 Led Square / Circular 5 To 8W Down Light 46 Led Square / Circular 9 To 12W Down Light 47 Led Square / Circular 13 To 15W Down Light 48 Led Square / Circular 16 To 20W Down Light 49 Square Shaped Crca / Die-Cast Aluminium Powder Coatedhousing Led Panel Light ( Slim Edge-Lit ) Suitable For Upto 8 W 50 Square Shaped Crca / Die-Cast Aluminium Powder Coatedhousing Led Panel Light ( Slim Edge-Lit ) Suitable For 9 W - 12 W 51 Square / Round Shaped Crca / Die-Cast Aluminium Powder Coatedhousing Led Panel ( Slim Edge-Lit ) Light Suitable For 13W To18w 52 Crca / Die-Cast Aluminium Powder Coatedhousing Led Panel Light ( Slim Edge-Lit ) Square / Round Shape Suitable For 19 To 24 W 53 Led Flexible Strip Light 5M Length Upto 25W 54 Led Flexible Strip Light 5M Length Upto 75W 55 Bulk Head Edge-Lit 10W Led 56 Led 18-20W Tube Light Fitting ( 4 Feet ) 57 Led Mirror Light With Integrated Driver Including 14W To 18W Lamp 58 0.5W, 230V Integral Type Led Lamp 59 Pigmy / Candle Lamp 100Watt 60 7W, 230V Integral Type Led Lamp. 61 12W, 230V Integral Type Led Lamp. 62 18W, 230V Integral Type Led Lamp. 63 18W Led Charging Lamp. 64 22W Led Charging Lamp. 65 Ding Dong / Electronic Musical Type Call Bell With Heavy Duty Coil. 66 Electronic Type Cordlesscallbell 67 Condenser 4 Microfarad 68 Led Street Light Fitting Suitable Forabove 50W Lamp, Including Lamp, With Pf >0.95Class Ip65. 69 Led Street Light Fitting Suitable For60w Lamp, Including Lamp, With Pf >0.95 Class Ip65 70 Led Street Light Fitting Suitable For Above 75W Lamp, Including Lamp, With Pf >0.95 Class Ip65 71 Led Street Light Fitting 100W, Including Lamp, With Pf >0.95 Class Ip65 72 Led Street Light Fitting 120 W, Including Lamp, With Pf > 0.95 Class Ip65 73 Led Street Light Fitting 150 W, Including Lamp, With Pf > 0.95 Class Ip 65 74 Led Flood Light Fitting Of 100W, Including Lamp, With Pf >0.95, Class Ip65 75 Led Flood Light Fitting Of 120W, Including Lamp, With Pf >0.95, Class Ip 65 76 Led Flood Light Fitting Of 150W, Including Lamp, With Pf >0.95, Class Ip 65 77 Led Flood Light Fitting Of 200W, Including Lamp, With Pf >0.95, Class Ip 65 78 Gate / Garden Light Fitting With 200Mm Dia. Glass Bowl Suitable For Upto 12W Led Lamp On Provided Pipe 79 Gate / Garden Light Fitting With 300Mm Dia. Glass Bowl Suitable For Upto 12W Led Lamp On Provided Pipe 80 Integral Post Top Lantern Fixtures ( Mushroom Type ) Suitable For Led Lamp Upto 12 W 81 Highbay Led Fitting Ip 65 With Lamp 70W-80W 82 Street Light Bracket Made From 25 Mm. Dia ‘B’ Class G.I. Pipe, 0.6 M In Length 83 Street Light Bracket Made From 40 Mm. Dia ‘B’ Class G.I. Pipe, 0.6M. In Length 84 Street Light Wall Bracket Made From 25 Mm. Dia ‘B’ Class G.I. Pipe 1.2 M In Total Length Complete 85 Street Light Wall Bracket Made From 40 Mm. Dia ‘B’ Class G.I. Pipe 1.2 M In Total Length Complete 86 Driver For Outdoor Led Fittings25w 87 Driver For Outdoor Led Fittings 45W 88 Driver For Outdoor Led Fittings 50W 89 Driver For Outdoor Led Fittings 75W 90 Driver For Outdoor Led Fittings 100W 91 Driver For Outdoor Led Fittings 150W 92 Driver For Outdoor Led Fittings 200W 93 Pcb For Outdoor Led Fittings25w 94 Pcb For Outdoor Led Fittings 45W 95 Pcb For Outdoor Led Fittings 50W 96 Pcb For Outdoor Led Fittings 75W 97 Pcb For Outdoor Led Fittings 100W 98 Pcb For Outdoor Led Fittings 150W 99 Pcb For Outdoor Led Fittings 200W 100 Outdoor Led Fitting Protector 25W - 200W 101 Metal Cawl 300 Mm 102 Metal Cawl 400 Mm 103 Storage Type Horizontal / Vertical Water Heater 15 Litres Capacity With Bee 5 Star Ratinghigh Impact Resistance Engineering Plastic Body 104 Storage / Pressure Type Horizontal / Vertical Water Heater 25 Litres With Bee 5 Star Rating Of Mild Steel Body. 105 Regular / Standard Model Ceiling Fan Of 1200Mm. Sweep Complete Erected In Position As Per Specification No. Fg-Fn / Cf 106 Five Star Rated Energy Saving Ceiling Fan 230 V A.C. 50 Cycles 1200 Mm Complete Erected In Position As Per Specification No. Fg-Fn / Cf 107 Supplying Condenser 2.5 Micro Farad For Ceiling Fan 108 Cabin Fan Of A.C. 230 V. 50 Cycles 250 Mm. / 300 Mm. Sweep Complete With Necessary Brackets For Fixing Cabin Fans, Wire Etc. 109 Cabin Fan Of A.C. 230 V. 50 Cycles 400 Mm. Sweep Complete With Necessary Brackets For Fixing Cabin Fans, Wire Etc. 110 Fresh Air Cum Exhaust Fan Of Light Duty 250 V A.C. 50 Cycles 300Mm. 1400 Rpm Rust Proof Body & Blades, Wire Mesh, Duly Erected In An Approved Manner. 111 Air Cooler ( Desert Cooler ) With Galvanised Steel Body 230 / 250 Volts, 50 Cycles, Normal Cooling Capacity Of 50 Cu.M Per Minute, With 12 Exhaust, Minimum 40 To 55 Litre Water Capacity Tank Complete. 112 Air Cooler ( Desert Cooler ) With Galvanised Steel Body 230 / 250 Volts, 50 Cycles, Normal Cooling Capacity Of 60 To 70 Cu.M Per Minute With 15 Exhaust Fan, Minimum 68 Litre Water Capacity Tank Complete. 113 Air Cooler ( Desert Cooler ) With Galvanised Steel Body 230 / 250 Volts, 50 Cycles, Normal Cooling Capacity Of 80 Cu.M Per Minute With 18 Exhaust Fan, Minimum 75 To 80 Litre Water Capacity Tank Complete. 114 Split Type Variable Speed Inverter Technology Room Air Conditioning Unit 2 Tr Capacity 115 Split Type Variable Speed Inverter Technology Room Air Conditioning Unit 1.5 Tr Capacity 116 Split Type Variable Speed Inverter Technology Room Airconditioning Unit 1 Tr Capacity 117 Sun Control Film On Glass To Achieve Better Cooling Effect Having 1.5 / 2 Mm Thickness, Ultra Violet Transmittance Less Than 2% And Solar Heat Rejection 78% In Approved Manner. 118 Split Typeroom Air Conditioning Unit With Variable Speed Inverter Technology 2.5 Tr Capacity 119 Soft Drawn Copper Pipe Suitable For Refrigeration System Having 22 Swg Thickness And Inner Dia / Size 12 Mm Complete. 120 Soft Drawn Copper Pipe Suitable For Refrigeration System Having 22 Swg Thickness And Inner Dia / Size 22 Mm Complete. 121 Cassette Type Variable Speed Inverter Technology Split Room Airconditioning Unit 2 Tr Capacity 122 Cassette Type Variable Speed Inverter Technology Split Room Air Conditioning Unit 3 Tr Capacity 123 Tower Type Room Air Conditioning Unit Of 2.5 Tr Capacity 124 Self-Contained Water Cooler 230 / 250 V 50 Cycles Nominal Cooling Capacity Of 80 Litres / Hr And Storage Capacity 120 Litres 125 Self Contained Water Cooler 230 / 250 Volts 50 Cycles Nominal Cooling Capacity Of 150 Liters / Hr And Storage Capacity 150 Liters 126 Fully Comprehensive Annual Maintenance Service For 80 / 120 / 150 Ltr. Water Cooler 127 Ultra Violet Storage Type Water Purifier ( Ro+Uv+Uf ) With Softener For Safe Drinking Water Consisting Of Uv Germicidal Tube Of 8W Capacity Choke Made Of Copper Wire And Two Indicator Lamps With Output Of Purified Water 7 To 8 Litre / Min With Activated Carbon Filter And Softener Operating On 230 V Single Phase A.C. Supply. 128 1400 Va Digital Pure Sine Waveinverter Based On Insulated Gate Bipolar Transistor ( Igbt ) Technology Single Phase 230V, 50 Hz Completeas Per Specification No.Ap-Inv ( Without Batteries ) 129 2500 Va Digital Pure Sine Waveinverter Based On Insulated Gate Bipolar Transistor ( Igbt ) Technology Single Phase 230V, 50 Hz Completeas Per Specification No.Ap-Inv ( Without Batteries ) 130 On Line Ups Pure Sine Wave Of 1 Kva Capacity Complete With Standard Features, Along With Necessary Smf Batteries For 30 Mins. Battery Backup, As Per Specification No. Ap-Ups 131 On Line Upspure Sine Wave Of 5 Kva Capacity Complete With Standard Features, Along With Necessary Smf Batteries For 30 Mins Battery Backup, As Per Specification No. Ap-Ups 132 12 V / 100Ah Tubular Battery With Battery Terminal Wire, Duly Charged Complete With 36 Months Warranty Complete 133 12 V / 150Ahtubular Battery With Battery Terminal Wire, Duly Charged Complete With 36 Months Warranty Complete 134 Fully Automatic Line Voltage Stabilizer Buck And Boost Type For Operation On Inputvoltage 160 To 270 V And Output Voltage 200 To 250 V Rated For 0.5 Kva Maximum Load And With Voltmeter, Selector Switch, 6A / 16A Flush Type 3 Pin Socket For Output And With 3 Core Flexible Cord And 3 Pin 6 / 16 A Plug Top Suitable For Refrigerator For Continuous Operation. 135 Solar Panel Comprising High Efficiency Poly-Crystalline / Multi Crystalline Photovoltaic Cell 100Wp, 12V 136 Solar Panel Comprising High Efficiency Poly-Crystalline / Multi Crystalline Photovoltaic Cell 250Wp, 24V 137 Solar Panel Comprising High Efficiency Poly-Crystalline / Multi Crystalline Photovoltaic Cell 300Wp, 24V With Necessary Clamps And Module Frame On Existing Structure Complete. Specification No. Esd-Sol / Cell 138 Battery With Capacity Of 12 V- 40 Ah With Duty Cycle 10-12 Hrs Suitable To Charge On Pv Cell With Necessary Wiring Connections Erected In Powder Coated Protection Box With Stand And Nut Bolts Complete. 139 Battery With Capacity Of 12 V- 75 Ah With Duty Cycle 10-12 Hrs Suitable To Charge On Pv Cell With Necessary Wiring Connections Erected In Powder Coated Protection Box With Stand And Nut Bolts Complete 140 Battery With Capacity Of 12 V- 150 Ah With Duty Cycle 10-12 Hrs Suitable To Charge On Pv Cell With Necessary Wiring Connections Erected In Powder Coated Protection Box With Stand And Nut Bolts Complete. 141 Solar Street Light Pole Comprising Of 12W X 2 Nos. Led Fittings, 12V Min. 100Ah Maintenance Free Lithium Battery, Min. 120Wp Spv Module, Ms Powder Coated Battery Box Weather Proof, Mounted On 75 / 80 Mm Dia. B-Grade Gi Pole Of 6 M. Height Along With Brackets, Foundation, Earthling And Necessary Accessories Complete. 142 Four Pole Power Contactor 430 V, 40 A For Time Switch Complete Erected On Provided Wooden Block / Box, With Necessary Materials. 143 Programmable Digital Almanac Timer Microcontroller Based 144 11 Kwp Off Grid Solar Power Pack With Gi Mounting Structure And Interconnecting Wires / Cables Along With 24V / 12V Pure Sine Wave Solar Power Inverter ( Thd<5% ) , 24V / 12V Charge Controller And 24V / 12V C-10 Rated Lead Acid Battery Bank Of Required Capacity And Required Spv Modules For Battery Backup Of 3 Hrs Complete. 145 1 Kwp Capacity On Grid Solar Power Pack With Gi Mounting Structure And Inter Connecting Wires / Cables Without Battery Bank Spv Modules And Solar Power Conditioning Unit Of Required Capacity Complete 146 Solar Water Pump Of 1 Hp Capacity, Dc Surface Type, 90000 Lpd, Total Head 10M, Comprising Of 900 Wp Pv Array / Submersible Type ( With Controller ) 42000 Lpd, Total Head Of 30M, Comprising Of 1200 Wp Pv Arraymounted On Gi Structure With Necessary Hardwarecomplete. 147 Double Pole Metal Clad Switch With Fuse And Neutral Link 240V, 16A On Iron / Gi Frame 148 Double Pole Metal Clad Switch With Hc Type Fuse And Neutral Link 240V, 32A On Iron / Gi Frame 149 Double Pole Metal Clad Switch With Hc Type Fuse 240V, 63Aon Iron / Gi Frame 150 Triple Pole Metal Clad Switch And Fuse 415V, 63A On Angle Iron / Gi Frame 151 Triple Pole Metal Clad Switch And Fuse 415V, 100A On Angle Iron / Gi Frame 152 Triple Pole Metal Clad Rewireable Fuse Switch 415V, 200A On Angle Iron / Gi Frame 153 Four Polemetalcladon Load Changeover Switch 415V, 63A Erectedon Angle Iron / Gi Frame Complete. 154 Four Pole Metal Clad On Load Change Over Switch 415V, 100A Erected On Angle Iron / Gi Frame Complete. 155 Four Pole Metal Clad On Load Change Over Switch 415V, 200A Erected On Angle Iron / Gi Frame Approved Make Complete. 156 On Load Four Pole Automatic Transfer Switch Suitable For 415V, 100A, 50 Hz, Capacitywith Enclosure, Automatic / Manual Inbuilt Time Delay, High Transfer Speed, Excellent Breaking Capacity, Superior Making Capacity, Compact & Light Weight, Erected On Provided Angle Iron / Gi Frame 157 On Load Four Pole Automatic Transfer Switch Suitable For 415V, 200A, 50 Hz Capacity With Enclosure, Automatic / Manual Inbuilt Time Delay, High Transfer Speed, Excellent Breaking Capacity, Superior Making Capacity, Compact & Light Weight, Erected On Provided Angle Iron / Gi Frame 158 Metal Clad Distribution Board 240V, 4 Way, 16A Perway &Neutral Barconnector Completeerectedoniron / Giframe 159 Metal Clad Distribution Board 240V, 6 Way, 16A Perway &Neutral Barconnector Completeerectedoniron / Gi Frame 160 Metal Clad Distribution Board 240V, 8 Way, 16A Perway &Neutral Barconnector Completeerectedoniron / Gi Frame 161 Street Light Control Panelin Powder Coated Crca 14 / 16 Swg Sheet, Outdoor Type, Single Phase, 240 V Consisted Of Suitable Rating Contactor, 24 Hrs Digital / Astronomical Time Switch With Minimum 5 Years Battery Backup, Spn Mcb 63 Aauto / Manual Selector Switch, On / Off Push Buttons, Indicator Lamps, Control Wiring, Metering Device, Etc For Automatic Operation & Overcurrent, Short Circuit, Earth Fault Protection Of Street Lights Upto The Max Load Of 12 Kw On Provided Iron Frame / Cc Foundation Complete. 162 Street Light Control Panelin Powder Coated Crca 14 / 16 Swg Sheet, Outdoor Type, Three Phase, 415Vconsisted Of Suitable Rating Contactor, 24 Hrs Digital / Astronomical Time Switch With Minimum 5 Years Battery Backup, Tpn Mcb 63 Aauto / Manual Selector Switch, On / Off Push Buttons, Indicator Lamps, Control Wiring, Metering Device, Etc For Automatic Operation & Overcurrent, Short Circuit, Earth Fault Protection Of Street Lights Upto The Max Load Of 12 Kw On Provided Iron Frame / Cc Foundation Complete. 163 Street Light Control Panelin Powder Coated Crca 14 / 16 Swg Sheet, Outdoor Type, Three Phase, 415 V Consisted Of Suitable Rating Contactor, 24 Hrs Digital / Astronomical Time Switch With Minimum 5 Years Battery Backup, Tpn Mcb 110 Aauto / Manual Selector Switch, On / Off Push Buttons, Indicator Lamps, Control Wiring, Metering Device, Etc For Automatic Operation & Overcurrent, Short Circuit, Earth Fault Protection Of Street Lights Upto The Max Load Of 12 Kw On Provided Iron Frame / Cc Foundation Complete. 164 Street Light Control Panel Outdoor Type, For Single Phase 2 Wire System Having In Built Astronomical Adjustable Programmable Timer With Minimum 5 Years Battery Backup, 2 Pole Contactor Upto 60 A, With Maintenance Mode To Switch On Street Lights During Time Of Repairs With Energy Consumption Data Recording For Analysis And Lcd Display For Energy Monitoring With Numeric Key Pad In Provided Box Complete. 165 Street Light Control Panel Outdoor Type, For Three Phase 4 Wire System Having In Built Astronomical Adjustable Programmable Timer With Minimum 5 Years Battery Backup, 4 Pole Contactor Upto 60 A, With Maintenance Mode To Switch On Street Lights During Time Of Repairs With Energy Consumption Data Recording For Analysis And Lcd Display For Energy Monitoring With Numeric Key Pad In Provided Box Complete. 166 Spmcb 6A To 32A, B- Series 167 Spmcb 40A B- Series 168 Spmcb 63A B- Series 169 Spmcb 100A B- Series 170 Spmcb 200A B- Series 171 Dpmcb 40A To 63A, B- Series 172 Spn Mcb 6A To 32A, B- Series 173 Spn Mcb 40A, B-Series 174 Spn Mcb 63A, B-Series 175 Spn Mcb 100A, B-Series 176 Spn Mcb 200A, B-Series 177 Tpmcb 40A To 63A 178 Fpmcb 40A To 63A 179 Double Pole Isolator Only Switch Versionof Miniature Circuit Breakerof40a 180 Double Pole Isolator Only Switch Versionof Miniature Circuit Breakerof63a 181 Triplepoleisolatorsonlyswitch Versionofminiaturecircuitbreaker Of 40A 182 Triple Pole Isolators Only Switch Version Of Miniature Circuit Breaker Of 63A 183 Triple Pole Isolators Only Switch Version Of Miniature Circuit Breaker Of 100A 184 Four Pole Isolators Only Switch Version Of Miniature Circuit Breakers Of 40A 185 Four Pole Isolators Only Switch Version Of Miniature Circuit Breakers Of 63A 186 Four Pole Isolators Only Switch Version Of Miniature Circuit Breakers Of 80 / 100A 187 Triplepole And Neutral Distribution Board ( Tpndb ) Surface / Flushmounted Suitable For Spmcb Of 12 Wayson Iron / Gi Frame 188 Triplepole And Neutral Distribution Board ( Tpndb ) Surface / Flushmounted Suitable For Spmcb Of 24 Ways On Iron / Gi Frame 189 Single Pole And Neutral Distributionboard ( Spndb ) Surface / Flush Mounted With 2 Waysfor Incoming And 6 Ways For Outgoing Sp Mcb’Son Iron / Gi Frame 190 Single Pole And Neutral Distributionboard ( Spndb ) Surface / Flush Mounted With 2 Waysfor Incoming And 10 Ways For Outgoing Sp Mcb’Son Iron / Gi Frame 191 3 Pole Mccb Upto 100A, 415V, With Short Circuitrating 25 Ka ( Ics=100% Of Icu ) , Adjustablethermal ( Overload ) Setting And Fixed Magnetic Setting With Provided Leads, Provision For Installation Of Shunt / Uv / Trip Alarm Contact And Mccb Should Have Phase Barriers Both Sides, In Provided Enclosure On Iron / Gi Frame 192 3 Pole Mccb Of 200A, 415V Capacity With Short Circuit Rating 25 Ka ( Ics=100% Of Icu ) Adjustablethermal ( Overload ) Setting And Fixed Magnetic Setting With Provided Leads, Provision For Installation Of Shunt / Uv / Trip Alarm Contact And Mccb Should Have Phase Barriers Both Sides, In Provided Enclosure On Iron / Gi Frame 193 3 Pole Mccb Of 250A, 415V Capacity With Short Circuit Rating 36 Ka ( Ics=100% Of Icu ) Adjustablethermal ( Overload ) Setting And Fixed Magnetic Setting With Provided Leads, Provision For Installation Of Shunt / Uv / Trip Alarm Contact And Mccb Should Have Phase Barriers Both Sides, In Provided Enclosure On Iron / Gi Frame 194 2 Polerccb Only Ofelectromagnetictype With 30 / 100 / 300 Ma Sensitivity And Having Capacity Of 16 / 25A Complete As Per Specification No. Sw-Rccb / Rccb 195 1 Pole Rccb 63A 196 2 Pole Rccb 100A 197 3 Pole Rccb 200A 198 2 Pole Rccb 40A 199 3 Pole Rccb 63A 200 4 Pole Rccb40a 201 4 Pole Rccb63a 202 4 Pole Rccb80a 203 4 Pole Rccb100a 204 Floor / Wall Mounting, Mccb Panel Board With Door Suitable For Four Pole Incoming 250A, 2 Waysfour Pole Outgoingupto 100 A MccbS On Iron Frame 205 Floor / Wall Mounting, Mccb Panel Board With Door Suitable For Four Pole Incoming 250A, 4 Waysfour Pole Outgoing Upto 100 A MccbS Oniron Frame 206 Iiron Clad Cut Out Of Hc Type 415V 16A 207 Iiron Clad Cut Out Of Hc Type 415V 32A 208 Iiron Clad Cut Out Of Hc Type 415V 63A 209 Iiron Clad Cut Out Of Hc Type 415V 100A 210 Iiron Clad Cut Out Of Hc Type 415V 200A 211 Metal Work In Crca Sheet With Fabrication Ofboxes, Panelboards, Etc. Including Cutting, Bending, Drilling, Welding, Riveting, Treated With Anti-Rust Treatment Andduly Powder Coated Or Paintedwith One Coat Of Red Lead Paint And 2 Coats Of Enamel Paint Complete. 212 Gi Sheet 1.25 Mm ( 18 Swg ) Tobeused For Fabricationofboxespanelboardsetc. Including Cutting, Bending, Drilling, Welding, Riveting Etc. And Paintingwithone Coat Of Red Leadpaint And 2 Coats Of Enamel Paint. 213 Gi Sheet 1 Mm ( 20 Swg ) Tobeused For Fabricationofboxespanelboardsetc. Including Cutting, Bending, Drilling, Welding, Riveting Etc. And Paintingwithone Coat Of Red Leadpaint And 2 Coats Of Enamel Paint. 214 Hylam Sheet / Ebonite 6 Mm Thickfor Covering Wall Entries Including Cutting, Drilling And Fixing With Nut Bolts / Screws Etc. Complete. 215 Plywood 12 Mm Thick Fixed To Wall Or On Provided Panel Board With Necessary Materials Such As Screws, Wall Fasteners Supports, Nuts Bolts Etc. Complete. 216 Iron, Sheet Metal Work Consisting Of Crcasheets, Varioussectionsofiron, Plates, Chequeredplates, Rods, Bars, Mspipes, Etc. Forpanel Board Or Any Other Purpose With Bending, Cutting, Drilling And Welding Completeerectedatthepositionwith Necessarymaterialsdulypaintedwith One Coat Of Red Oxide And Two Coats Of Enamelpaint To Match The Switchgears Or As Per Directions By The Authority. 217 Self-Locking Arrangement With Keys In Duplicate 218 Bus Bar Chamber Triple Pole With Neutral With Four Aluminium Bars, 500V, 100A 219 Bus Bar Chamber Triple Pole With Neutral With Four Aluminium Bars, 500V 200A 220 Bus Bar Chamber Triple Pole With Neutral With Four Copper Bars, 500V, 100A 221 Bus Bar Chamber Triple Pole With Neutral With Four Copper Bars, 500V 200A 222 Supplying & Erecting G.I. Pipe‘A’ Class 40 Mmdia.Erectedfor Enclosingxlpearmouredcable On Wall / Poleas Per Specification No. Cb-Ce 223 Supplying Andlaying ( Including Excavation Of Suitable Width & Depth Up To 90 Cm ) 50 Mmoutside Dia. Double Wall Corrugatedpipes ( Dwc ) Ofhdpe For Enclosing Cable Below Ground / Road Surface, To Required Depth Complete. 224 Xlpe Armoured Cable 2 Core 6Sq. Mm. Aluminium Conductor Withcontinuous 225 Xlpe Armoured Cable 2 Core 10Sq. Mm. Aluminium Conductor 226 Xlpe Armoured Cable 3½ Core70sq. Mm. Aluminium Conductor 227 Xlpe Armoured Cable 3½ Core120sq. Mm. Aluminiumconductor 228 Xlpe Armoured Cable3½ Core150sq. Mm. Aluminium 229 Xlpe Armoured Cable 4 Core10sq. Mm. Aluminium Conductor 230 Xple Armoured Cable 4 Core16sq. Mm. Aluminium Conductor 231 Xlpe Armoured Cable 4 Core25sq. Mm. Aluminium Conductor 232 Xlpe Armoured Cable 4 Core35sq. Mm. Aluminium Conductor 233 Xlpe Armoured Cable 2 Core4sq Mm Copper Conductor 234 Xlpe Armoured Cable 2 Core6sq. Mm. Copper Conductor 235 Xlpe Armoured Cable 3 Core6sq. Mm. Copperconductor 236 Xlpe Armoured Cable 3 Core10sq. Mm. Copperconductor 237 70 Sq. Mm A .B. Cable 238 90 Sq. Mm A .B. Cable 239 Suspention Clamp For Ab Cable 240 Lt Distribution Box 241 Steeltubular Swaged Pole 139.7 X 114.3 X 88.9 Mm. Dia With 4.5X3.65X3.25 Mm Thickness ( 4.5 + 1.75 + 1.75 M ) Length Respectively And Total 8 M Long With Pole Cap, Base Plate In Provided Foundation. ( Weight 101 Kg. ) 242 Steeltubular Swaged Pole 139.7 X 114.3 X 88.9 Mm. Dia With 4.5X3.65X3.25 Mm Thickness ( 5 + 1.75 + 1.75 M ) Length Respectively And Total 8.5 M Long With Pole Cap, Base Plate In Provided Foundation. ( Weight 109 Kg. ) 243 Steel Tubular Swagedpole 165.1 X 139.7 X 114.3 Mm.Dia With4.5 X 4.5 X 3.65 Mm Thickness ( 5 + 2 + 2M ) Length Respectivelyandtotal9 M Long With Pole Cap, Base Plate In Provided Foundation ( Weight 147 Kg ) 244 Rolledsteel Joist ( Girder ) Pole 150 X 80 Mm / 150 X75 Mm ( 14.9 Kg / M ) With Provided Base Plate In Provided Foundation As Per Specification No. Oh-Pl / Rsj 245 Rolledsteel Joist ( Girder ) Pole125 X 70 Mm ( 13.3 Kg / M ) With Provided Base Plate In Provided Foundation 246 G.I. Pipepole ‘B’ Grade80 Mm Dia 6 M Longwith Pole Cap, Base Plate In Provided Foundation 247 M.S. Pipe Pole ‘B’ Grade80 Mm Dia 6 M Longwith Pole Cap, Base Plate In Provided Foundation 248 12.5 M ( Clear Height ) High Mast ( Top-150Mm, Bottom- 360Mm ) With Lowering And Raising Motorized Unit, Lantern Carriage Assembly Suitable For Max. 6 Nos. Luminaries And Its Control Gear Box, Lightning Finial Arrangement For Fixing Aviation Light And Foundation Bolts On Provided Foundation 249 9M ( Clear Height ) Fixed Type High Mast ( Top-100Mm, Bottom- 200Mm ) With Hexagonal / Round Bracket And Foundation Bolts Suitable For Max. 4 Nos Floodlight Fixtures On Provided Foundation 250 12.5M ( Clear Height ) Fixed Type High Mast ( Top-110Mm, Bottom- 242 Mm ) With Hexagonal / Round Bracket And Foundation Bolts Suitable For Max. 6 Nos Floodlight Fixtures On Provided Foundation 251 6 M High ( Clear Height ) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 130 Mm A / F, Top 70 Mm A / F On Provided Foundation 252 7 M High ( Clear Height ) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 130 Mm A / F, Top 70 Mm A / F On Provided Foundation 253 9 M High ( Clear Height ) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 155 Mm A / F, Top 70 Mm A / F On Provided Foundation 254 6 M High Galvanised Conical Pole With Foundation Bolts Having Bottom Dia. From 135 To 160 Mm, Top Dia. From 65 To 75 Mm On Provided Foundation 255 Providing & Erecting 9 M High Galvanised Conical Pole With Foundation Bolts Having Bottom Dia. From 165 To 200 Mm, Top Dia. From 65 To 75 Mm On Provided Foundation As Per Specification No.Oh-Pl / Cpl 256 Galvanised 1000Mm Single Arm Sword Type Bracket 257 Galvanised 1000Mm Double Arm Sword Type Bracket 258 Outdoor Stand Mounted Feeder Pillar For Highmast Of The Same Manufacturer With 32A Tpn Mcb Incomer, Single Dial Timer Switch, 25A Tp Contactor For Automatic Switching Of Luminaries, 2 Nos 9A Contactors And Raise / Lower Push Button, And Provision For Termination Of Adequate Size Of Incoming And Outgoing Cables Erected In Min. 14 Swg Crca Sheet Box With Supporting Angles, Self-Lock, Gasket And Slanting Top Erected With Cc Foundation Complete. 259 Outdoor Stand Mounted Feeder Pillar For Highmast Of The Same Manufacturerwith 63A Tpn Mcb Incomer, Single Dial Timer Switch, 45A Tp Contactor For Automatic Switching Of Luminaries, 2 Nos 9A Contactors And Raise / Lower Push Button, And Provision For Termination Of Adequate Size Of Incoming And Outgoing Cables Erected In Min. 14 Swg Crca Sheet Box Powder Coatedwith Supporting Angles, Self-Lock, Gasket And Slanting Top Erected With Cc Foundation Complete . 260 Ms Pole Bracket For Guarding / Lt Oh Line, Fabricated From Angle Iron 50X50x6 Mm And 550 Mm Long For Necessary Nos. Of Provided Insulators And Erecting On Pole With 50X6mm Clampcomplete 261 Ms Pole Bracket For Guarding / Lt Oh Line, Fabricated From Angle Iron 50X50x6 Mm And 1100Mm Long For Necessary Nos. Of Provided Insulators And Erecting On Pole With 50X6mm Clampcomplete 262 Ms Pole Bracket For Guarding / Lt Oh Line Fabricated From Ism Channel 75X40x6mm And 550 Mm Longfor Necessary Nos. Of Provided Insulators And Erecting On Pole With 50X6mm Clampcomplete 263 Ms Pole Bracket For Guarding / Lt Oh Line Fabricated From Ism Channel 75X40x6mm And 1100 Mm Long For Necessary Nos. Of Provided Insulators And Erecting On Pole With 50X6mm Clamp As Per Approved Method Of Construction And Complete 264 Ms Pole Bracket For Lt Oh Conductor Fabricatedfrom65x65x6 Mm Section, 550 Mm Long For Necessary Nos. Of Provided Insulators And Erecting On Pole With 50X6 Mm Clamp As Per Approved Method Of Construction And Complete 265 Ms Pole Bracket For Lt Oh Conductor Fabricatedfrom65x65x6 Mm Section, 1100 Mm Long For Necessary Nos. Of Provided Insulators And Erecting On Pole With 50X6 Mm Clamp As Per Approved Method Of Construction And Complete 266 Ms Pole Bracket, For Oh Conductor Fabricated From Ism Channel, 75X40x6mm 550Mm Long For2 Insulators And Erecting On Pole With 50X6 Mm Clamp As Per Approved Method Of Construction And Complete 267 Ms Pole Bracket, For Oh Conductor Fabricated From Ism Channel, 75X40x6mm1100mm Long For 4 Insulators And Erecting On Pole With 50X6 Mm Clamp As Per Approved Method Of Construction And Complete 268 Aluminium Stranded Conductors 7 / 2.21Mm Complete. ( Gnat ) ( 73.77Kg / Km ) 269 Aluminium Stranded Conductors 7 / 3.10Mm. Complete. ( Ant. ) ( 145.0 Kg / Km ) 270 Porcelain Shackle Type Lt Medium Insulator 271 Providing And Fixing G.I. Earthing Stud With Necessary Materials. 272 G.I. Stay Set For Poles, Including Loopinsulatorsat Inaccessible Height Complete With Anchor Plate300x300x6mm., Strainingscrews, G.I.Stay Wire 7 / 10 Swg, G.L. Stay Rod 20 Mm X 1.8 M Length And Poleclamps Duly Erected In Provided Cement Concrete Foundation. 273 Fibre / Pvc Spacers For Lt Overhead Line 3 To 5 Conductors Complete Erected. 274 ‘D’ Type Pole Clamps 275 C Type ( Half ) Clamps 276 Ms Base Plate 30X30x0.6 Cm Sizefixed To The Pole Base Either By Welding Or By Set Screws 12 Mm. Dia Fixed At Position. 277 Mspole Cap Fabricated From Ms Pipe Or Cast Iron Fixedto Pole By Means Of Set Screws And 75 Mm Deep. 278 G.I. Stay Wire 7 / 10 Swg 279 G.I. Bare Wire 8 Swg 280 Providing Earthing With Copper Earth Plate Size 30 X 30 X 0.315 Cm Complete With All Materials, Testing & Recording The Results Asper Specification No. Ea-Ep 281 Providingpipetype Earthing With 40Mm. Dia. G.L. Pipe Or 20 Mm Dia. G.L. Rodcomplete With All Materials As Per Specification No. Ea-Ep 282 Aluminium Strip Of Required Sizes Used For Earthing On Wall And / Or Any Other Purpose With Necessaryaluminiumclampsfixed On Wall Painted With Bituminous Paint In An Approved Manner With Joints Required. As Per Specification No Ea-Ep. 283 Copper Strip Of Required Size Used For Earthing On Wall And / Or Any Other Purpose With Necessarycopperclampsfixed On Wall Painted With Bituminous Paint In An Approved Manner With Joints Required. 284 Gi Earth Wire Of High Purity Of Different Sizes Used For Earthing Or Any Other Purposes On Wall With Necessary G. I. Clamps Fixed On Wall / Cable / Conduit With Screws In An Approved Manner. 285 Providing And Back Filling Back Filling Ground Enhancing Compound 25 Kg Bag Complete. 286 Supplying And Erecting D. O. L. Starter Suitable For 250V. Single Phase, 50 Cycles With Overload Element With Necessary Materials And Connected To Supply Upto 3 H.P. 287 Supplying And Erecting D.O.L. Starter 400V. 3 Phase, 50 Cycles With No Volt Coil And Overload Element With Necessary Materials And Connected To Supply Upto 7.5 H.P. 288 Fully Automatic Star / Delta Starter Suitable For 12.5 H.P. To 15 H.P. For 3 Phase Squirrel Cage Motor Totally Enclosed With Overload And No Volt Relay Complete Erected On Provided Angle Iron Frame. 289 Fully Automatic Star / Delta Starter Suitable For Above 15 H.P. Upto 25 H.P. Squirrel Cage Motor Totally Enclosed With Overload And No Volt Relay Complete Erected On Provided Angle Iron Frame. 290 Fully Automatic Star / Delta Starter Suitable For Above 25 H. P. To 35 H. P. Squirrel Cage Motor Totally Enclosed With Overload And No Volt Relay Complete Erected On Provided Angle Iron Frame. 291 Pump Protection Relay Comprising Current Sensing Phase Failure And Uv+Ov Relay With Dry Run And Overload Protection Suitable For 3 Phase Pumps. 292 Flat Flexible 3 Core 6 Sq Mm Pvc Sheathed Submersible Type Copper Cable Suitably Clamped At Fixed Intervals With Column Pipe Assembly Complete. 293 Flat Flexible 3 Core 10Sq.Mm Pvc Sheathed Submersible Type Copper Cable Suitably Clamped At Fixed Intervals With Coloum Pipe Assembly Complete. 294 Automatic Control Panel For 3 Ph, 415 Volt, A.C. Submersible / Centrifugal Pump Set Upto 7.5 Hp Consisting Of Dol Starter Having Relay Range 9-14 Amp, S.P.P., Combined Ammeter / Voltmeter, Phase Indicating Lamp Enclosed In Crca Powder Coated Vibration Proof Enclosurewith Ip 54 Protection. Control Panel Should Offer Single Phasing, Phase Reversal, Phase Imbalance Etc 295 Automatic Control Panel For 3 Ph, 415 Volt, A.C. Submersible / Centrifugal Pump Set For 7.5 To 10 Hp Consisting Of Dol Starter Having Relay Range 13-21 Amp, S.P.P., Combined Ammeter / Voltmeter, Phase Indicating Lamp Enclosed In Crca Powder Coated Vibration Proof Enclosure With Ip 54 Protection. Control Panel Should Offer Single Phasing, Phase Reversal, Phase Imbalance Etc 296 Making Cement Concrete Foundation Including Excavation ( 45X 45X 120 ) Cm Deep In 1:3:6 Cement Concrete, 20 To 25 Mm Stone Metal, ( 45X 45X 45 ) Cm / 45 Cm Dia. X 45 Cm Height Plinth Duly Plastered, With Necessary Curing And Finishing Complete. ( For 6 M Pole ) 297 Making Cement Concrete Foundation Including Excavation ( 60X 60 X 150 ) Cm Deep In 1:3:6 Cement Concrete 20 X 25 Mm Stone Metal, ( 45X 45X 45 ) Cm / 45 Cm Dia. X 45 Cm Height Plinth Duly Plastered, With Necessary Curing And Finishing Complete. ( Above 6 M To 9 M Poles ) 298 Makingcement Concrete Foundation Including Excavation ( 60 X 60 ) Cm X Deep 1 / 6 Of Pole Length In 1:3:6 Cement Concrete 20 X 25 Mm Stone Metal, 45 Cm X 45 Cm X 45 Cm / 45 Cm Dia. X 45 Cm. Height Plinth Duly Plastered, With Necessary Curing And Finishing Complete. ( For Above 9 M Poles ) 299 Making Cement Concrete Foundation Including Excavation ( 60X 60X 150 ) Cm Deep In 1:3:6 Cement Concrete, ( 20 To 25 ) Mm Stone Metalwith Necessary Curing And Finishing Complete. ( For Stay ) . 300 Making Cement Concretefoundationin 1:3:6 Cement Concrete, ( 20 To 25 ) Mm. Stone Metal Duly Plastered With Necessary Curing Forcomplete. ( Pole Muffing Or Any Other Purpose ) . 301 Making M- 20 Grade Reinforced Cement Concretefoundation By Considering The Safe Soil Bearing Capacityas 10 T / Sq.M At 1.5 M Depth Including Supply Of Steel, Concrete, Excavation, Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete ( For 3 To 5M Octagonal / Conical Gi Pole ) . 302 Makingm- 20 Grade Reinforced Cement Concretefoundation By Considering The Safe Soil Bearing Capacity At Site As 10 T / Sq.Mat 1.5 M Depth Including Supply Of Steel, Concrete, Excavation And Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete ( For 6M To 8M High Octagonal / Conical Gi Pole ) . 303 Makingm- 20 Grade Reinforced Cement Concretefoundation Byconsidering The Safe Soil Bearing Capacity At Site As 10 T / Sq.Mat 1.5 M Depth Including Supply Of Steel, Concrete, Excavation And Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete ( For 9M & 10M High Octagonal / Conical Gi Pole ) . 304 Makingm- 20 Grade Reinforced Cement Concretefoundation By Considering The Safe Soil Bearing Capacity At Site As 10 T / Sq. M At 1.5 M Depth Including Supply Of Steel, Concrete, Excavation And Fixing Provided Nut Bolts With The Help Oftemplate, Duly Plastered As Per Design Complete ( For 11M & 12.5M High Octagonal / Conical Gi Pole ) . 305 Making M- 20 Cement Concrete Foundation By Considering The Safe Soil Bearing Capacity At Site As 10 T / Sq. M At 2 M Depth Including Excavation And Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete ( For 12.5 M Raising Lowering High Mast ) . 306 Spray Painting The Table Fan / Pedestal Fan / Cabin Fan / Ceiling Fan / Exhaust Fan Including Guards Etc By Scrapping The Existing Paint Complete. Specification No. Cw-Ptg / Ptf. 307 Painting Of Pipe Pole Upto 6 M Length Along With Street Light / Pole Brackets / Clamps Etc By Scrapping The Existing Paint Complete. Specification No Cw -Ptg / Ptp. 308 Painting Of Steel Tubular / Rail / Rsj Pole Above 6.0 M Length Along With Street Light Pole Brackets, Clamps Etc By Scrapping The Existing Paint Complete. Specification No Cw -Ptg / Ptp. 309 Labour Charges For Internal Wiring Of Fider Piller / Panel. 310 3 Terminal Earth Resistance Tester 311 Tong Tester 312 L N Key Set
Basic Detail
Tender No SMC_ELECTRICAL_2023_2851
Bidding Type Tender
Location
City saoner
State Maharashtra
Key Dates
Publish Date 20 Dec 2023
Submission Date 29 Dec 2023
Open Date 01 Jan 2024
Finance
Tender Value Ref. Documents
Tender Fee 2500
EMD 25000
Exemption Not Available
Document List
2b014669-7c5b-4236-9465-e4b46a34040b.html
BOQ_1699292.xls
MaterialDoc.PDF
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Dec 20, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 29, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 01, 2024

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

2b014669-7c5b-4236-9465-e4b46a34040b.html

xls

BOQ_1699292.xls

PDF

MaterialDoc.PDF

pdf

Tendernotice_1.pdf

TenderDetail
Loading tenders