Bharat Sanchar Nigam Limited-BSNL has published Tender For Civil Works Including Aluminium Partitions, Work Stations, Painting And Repairing Works In Room No-411, Minor Repair Works In Rmc Dc, Term Cell, Door Sanchar Bhavan 4Th Floor, Bhubaneswar.. Submission Date for this Tender is 01-01-2024. Civil Work Tenders in bhubaneswar Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Sub-Head : Dismantling and Demolishing |
2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
3 | Sub-Head : Woodand P.V.C. Work |
4 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
5 | Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately). |
6 | Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587. |
7 | Sub-Head : Aluminium Work |
8 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
9 | For fixed portion |
10 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
11 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
12 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
13 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
14 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
15 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
16 | Providing and fixing polished brass handles of approved brand and manufacturer with necessary brass screws etc. |
17 | 200 mm CTC (Centre to centre) |
18 | Providing and making etching of approved pattern in glass panels of doors/ windows/ partitions including carriage all complete as per direction of Engineer-in-charge. |
19 | Providing and fixing heavy duty door closure of Godrej with product code 1938 or equivalent for heavy type doors with speed arrangement including drilling and fixing stainless steel screws, accessories etc complete as per direction of Engineer-in-charge. |
20 | Sub-Head : Steel Work |
21 | Providing and fixing anchor fastner M-10 with plastic sleeves of approved quality and required size including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. |
22 | Sub-Head : Flooring |
23 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of approved brand & manufacturer in all colours and shade in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints(Payment for grouting of joints to be made separately). |
24 | Size of Tile 600x600 mm |
25 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
26 | Double charge vitrified tile polished finish of size |
27 | Size of Tile 600 x 600 mm |
28 | Sub-Head : Finishing |
29 | 12 mm cement plaster of mix : |
30 | 1:4 (1 cement: 4 coarse sand) |
31 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
32 | Water thinnable cement primer. |
33 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: |
34 | Two or more coats on new work. |
35 | French spirit polishing : |
36 | Two or more coats on new works including a coat of wood filler. |
37 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
38 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
39 | One coat. |
40 | Sub-Head : Repairs to Buildings |
41 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
42 | With cement mortar 1:4 (1cement: 4 coarse sand). |
43 | Easing, adjusting including removing, repairing and refixing of cup board/ window shutters up to 3.00 sqm in area, replacement of damaged hinges/ rollers, screws wherever necessary all complete as per direction of Engineer-in-charge. |
44 | Repairing of aluminium doors including removing and refixing, replacement of hinges/ pivots, screws wherever necessary etc complete as per direction of Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail