Tender For Construction Of Additional Class Room Of Namkhana Union High School At Mouza Shibnagar Abad Under Namkhana Ps
Tender Value
6.93 Lakhs
Estimated cost
Bid Submission
15 Jan 2024
0 days left
EMD
13861
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
namkhana → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Additional Class Room Of Namkhana Union High School At Mouza Shibnagar Abad Under Namkhana Ps
BOQ
| Sl. No. | Item Description |
| 1 | Constuction of Additional Class Room |
| 2 | Earth work in excavation of foundation trenches or drains,in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m. as directed.The item includes necessary trimming the sides of trenches,levelling,dressing and ramming the bottom,bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm. |
| 3 | Earth work in filling of foundation trenches or plinth with good earth, in layers not exceeding 150 mm. Including watering and ramming etc. Layer by layer complete.(Payment to be made on the basis of measurement of finished quantity of work).(a) With earth obtained from excavation of foundation. |
| 4 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm. as directed and consolidating the same by through saturation with water, ramming complete including the cost of supply of sand. |
| 5 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 6 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any ,in ground floor as per relevant IS codes.(a) In ground floor and foundation. (A) 1:2:4 proportion. |
| 7 | 1 st. class Brick Work in cement sand morter with (6:1) ratio including scaffolding & curing all incidental charges complete.(a) In foundation & plinth…. |
| 8 | 1 st. class Brick Work in cement sand morter with (6:1) ratio including scaffolding & curing all incidental charges complete.(b) In Super Structure… ( In first floor ) |
| 9 | 125mm thick brick work with 1st. Class bricks in cement mortar (1:4) in ground floor.In Super Structure/Partition walls… ( In first floor) |
| 10 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any ,in ground floor as per relevant IS codes. |
| 11 | Reinforcement ( for reinforced concrete work) in all sorts of structures including distribution bars,stirrups,binders etc. Initial straightening and removal of loose rust (if necessary),cutting to requisite length,hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every intersection,complete as per drawing and direction. (a) For works in foundation,basement and upto roof of ground floor/upto 4m.(i) Tor Steel / Mild Steel…For ground Floor.II. Other ThanTATA/RINL … |
| 12 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams and columns,lintels curved or straight including fitting ,fixing and striking out after completion of works(upto roof of ground floor).(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 13 | 25mm. Thick damp proof course with cement concrete with stone chips(4:2:1) and admixture of water proofing compound as per manufacturer\"s specification over a coat of polymer based paint,double chequered complete as directed (cost of water proofing compound & polymer based paint to be paid separately). |
| 14 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking outjoints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement. (i) 20 mm thick.: |
| 15 | Plaster (to wall, floor,ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding the cost of chipping over concrete surface].(b) 15 mm thick plaster. (with 6: 1 morter.)…(out side + inside). In first floor |
| 16 | (ii) With 1:4 cement mortar./ ( c ) 10 mm thick plaster., for ceiling. |
| 17 | Neat cement punning about 1.5mm thick in wall , dado,window sill,floor etc.NOTE : Cement 0.152 m3 per 100 m2. (P-192,It.No.-15) |
| 18 | (a) M.S. or W.I. Ornamental grill of approved design joints continuously welded with M.S.,W.I. Flats and bars of windows,railing etc. fitted and fixedwith necessary screws and lugs in ground floor.(i) Grill weighing above 10 kg./sq.mtr. And up to 16 kg./sq.mtr. |
| 19 | Wood work in door and window frame fitted and fixed complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete,iron butt hinges,and M.S. clamps.(a) Sal Local :… |
| 20 | Supplying,fitting and fixing M.S. clamp for fixing door and window frame made of flat bent bar,end bifurcated,fixed in cement concrete with stone chips (4;2:1) fitted and fixed complete as per direction.( a ) 40mm.x6mm. Andabove 250mm. Length. |
| 21 | Panel shutters of door and window,as per design (each panel consisting of single plank without joint),including fitting and fixing the same in position but excluding the cost of hige and other fittings.(Ground Floor) (iv) 35 mm. Thick shutters with 19mm. Thick penal./( b ) Sishu,gamar,champ,Badam, Bhola,Mogra,Hallak… |
| 22 | Iron butt hinges of approved quality fitted and fixed with steel screws,with ISI mark.( vi ) 100mm. x 50mm. x 1.25mm. |
| 23 | Anodised aluminium barrel/tower/socket bolt of approved manufactured from extruded section conforming to IS 207/ 74 fixed and fitted with cadmium plated.( iii ) 100mm. Long x 10mm dia bolt. |
| 24 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm. dia rod with centre bolt and round fitting.( a) 300mm. Long. |
| 25 | Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to IS specification (IS 230/72) fitted and fixed.( a) With continuous plate base (Hexagonal / round rod ) / (vi) 150 mm grip x 10 mm dia.Rod. |
| 26 | (A) Iron door ring of approved quality fitted and fixed with nut and washer complete. ( i ) 50mm.Dia. |
| 27 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\"s specification. (iii) Two coats. |
| 28 | Priming one coat on steel or other metal surface with synthetic oilbound primer of approved quality including smoothening surfaces by sandpapering etc. |
| 29 | Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. includingusing of approved putty etc. on the(b) On steel or other metal surface , if necessary :.(iv) Two coats (with any shade except white) |
| 30 | Priming one coat on timber or plastered surface with synthetic oilbound primer of approved quality including smoothening surfaces by sandpapering etc.(P-200,It. No. : 1b) |
| 31 | Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. includingusing of approved putty etc. on the surface, if necessary :a) On timber or plastered surface :(iv) Two coats (with any shade except white) |
| 32 | Applying Interior grade Acrylic Primer of approved quality and brandon plastered or cencrete surface old or new surface to receiveDistemper/ Acrylic emulsion paint including scraping and preparingthe surface throughly, complete as per manufacturer\"s specification andas per direction of the EIC. (In Ground Floor) i) Water based interior grade Acrylic Primer |
| 33 | Acrylic Distemper to interior wall, ceiling with a coat of solvent basedinterior grade acrylic primer (as per manufacturer\"s specification)including cleaning and smoothning of surface.Two Coats |
| 34 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming toIS:13592-1992 with all necessary clamps nails, including making holes inwalls, floor etc. cutting trenches in any soil through masonry concretestructures etc if necessary and mending good damages including joining withjointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. ( A) UPVC Pipes (ii) 110 mm dia |
| 35 | Supplying, fitting & fixing Name plate and Photograps |
| 36 | For Electrical Works |
| 37 | Add 18% GST |
| 38 | Add 1% L&W cess |
AI Tender Summary
Tender Timeline
Dec 20, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 15, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 17, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender