Tender For Construction Of 30000 Oht Thoppiruppu Chinnur Pudupettai
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Dec 2023
0 days left
EMD
16800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
parangipettai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of 30000 Oht Thoppiruppu Chinnur Pudupettai
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation & depositing on bankwith an initial lead of 10 metre & initial lift of 2 metre in Hard shift clay, stiff block cotton, hard red earth shales, murrum, gravel, stoney earth, and earth mixed with small size boulders and hard gravelly soil (SS 20B) for foundation including shoring, strutting, baling out water providing danger light wherever necessarydepositing thesurplus earth on bank and otherincedential charges etc., complete and as directed by TWAD board Officers First depth of 2m From 0 to 2 m below GL |
| 2 | Second depth of 2m From 2m to 4 m below GL |
| 3 | \"Sand filling for foundation with clear river sand including cost of sand, watering,ramming andconsolidation etc complete as directed by TWAD Bord officers |
| 4 | Plain Cement Concrete 1:4:8 (one cement, four sand and eight hard granite broken stone of 40mm size ISS gauge) forfoundation and footing including mixing, placing, ramming ,finishing curing etc. complete in accordance with standard specification and as directed by the TWAD Board Officers. |
| 5 | Reinforced Cement Concrete Mix M30 grade using 10mm & 20mm Hard blue granite Broken stone (machine crushed)excluding the cost of RTS rods for reinforcement and centering, strutting, shutteringbut including cost of all materialsmixing, laying, Vibrating the concrete with mechanical vibrators, ramming, consolidating,finishing and curing etc., Complete and as directed by the TWAD Board Officers.Below 1.5m from GL |
| 6 | 0m to 1.50m below GL |
| 7 | 0m to 4.50m above GL |
| 8 | 4.50 m to 7.32 m above GL |
| 9 | 7.32 m to 10.98 m above GL |
| 10 | 10.98 m to 14.64 m above GL |
| 11 | 14.64 m to 18.30 m above GL |
| 12 | Supply and erection of steel centering, shuttering for soffits and sides including necessary supports and strutting for all RCC works using MS sheets of suitable size of BG10 stiffened with MS angle of size 25 X 25 X 3 mm for boarding laid over I type MS Truss of size 25 X 25 X 3mm about 90cm c/c and supported by 40mm GI pipes (Medium) spaced at 75cm c/c etc complete and as directed by the TWAD Board Officers. Plain Surface |
| 13 | From GL to 3.30m |
| 14 | From 5.30m to 6.30m above GL |
| 15 | From 8.30m to 9.30m above GL |
| 16 | From 11.30m to 12.30m |
| 17 | Square Column Below GL and upto 3.30m above GL |
| 18 | 3.31m to 4.30m ht |
| 19 | 4.31m to 5.30m ht |
| 20 | 5.31m to 6.30m ht |
| 21 | 6.31m to 7.30m ht |
| 22 | 7.31m to 8.30m ht |
| 23 | 8.31m to 9.30m ht |
| 24 | 9.31m to 10.30m ht |
| 25 | 10.31m to 11.30m ht |
| 26 | 11.31m to 12.30m ht |
| 27 | Curved Surface - upto 3.30m ht.11.30m to 12.30m |
| 28 | 12.30m to 13.30m |
| 29 | 13.30m to 14.30m |
| 30 | 14.30m to 15.30m |
| 31 | \"Supplying, cutting, bending, tying, fabricating and placing in position of steel rods for all RCC works including cost of steel and binding wire etc.( The steel should conform to the relevant ISspecificationand supplied with test certificateFe. 415 grade as per IS specification No.1786/1985 and as amended from time to time)delivery at site of work including loading, freight, unloading,stacking,transit insurance charges, taxes etc. complete.and as directed by the TWAD Board officers. |
| 32 | Painting two coats with approved cement paint over one priming coat of white cementover cement plastered wall surface and ceiling including cleaning preparing the surface and curing etc., complete (using cement paint of colour as approved by the Departmental officer) and as directed by the TWAD Board officers. |
| 33 | Fabrication, supply, delivery and fixing of outside MS Ladder of 45cmclear wide made out of 50 mm x 50mm x 6mm MS angle for both sides and for steps at 30cm C/C welded jointed etc ., for I staging from GL to 1st level brace (weight 4.5kg/m) IInd and IIIrd staging upto floor slab and IVth staging from floor slab to roof top. Supply, delivery and fixing of 32 mm GI pipes medium for hand rails from I stage to IVth stage. RCC M30 Grade mix for Landing slab 5 nos. at Ground Level- 1No. and above Ground Level - 4Nos. Supply and fixing of 32mm GI pipe medium for hand rails for the Landing slab. Supplying and fixing of MS Base plate of 100mm X 100mm X 6mm thick for fixing Anchore fastener bolt for fixing of hand rails at Landing slab and MS Ladder providing locking arrangements with two coats of approved enamel paint over one coat of red oxide paint as per approved Type Design and as directed by TWAD board officers. |
| 34 | Providing and fixing of RCC inner access ladder in RCC 1:11/2 :3 (one cement,one and half sand and three aggregate) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centring,shuttering charges, mixing concrete,curing etc. to required height and clear width of 45 cm consisting of 2 nos. of vertical post of 10 cm x 15 cm and step slab of 25mm x 25mm etc.complete and as directed by TWAD Board Officers. |
| 35 | \"Providing 110mm PVC vent cowlarrangementsmosquito proof nylon net and as directed by TWAD Board officers |
| 36 | Supply and fixing of cut stone of size 0.30m x 0.30m x 0.15m in CM 1;3(one cement and three sand) below inlet pipe for Service Reservoir as directed by TWAD Board Officers. |
| 37 | Providing manhole cover of size 0.60 x 0.60M in RCC 1:1.5:3 with suitable reinforcement and 50x50x6mm MS angle fixed along edges and as directed by TWAD Board officers |
| 38 | Painting TWAD Board emblem on the SR with enamel paint as per Board\"s specification and as directed by TWAD Board officers |
| 39 | Pipe connection arrangements for inlet,outlet,scour and overflow etc. including cost of pipes,specials,valve,labour charges for lifting, aligning, cutting, threading,fixing and painting of GI pipes with two coats of approved quality enamal paint etc. complete as detailed below.65mm GI pipes for inlet connection |
| 40 | 65mm GI pipes for over flow & rain water harvesting pipe |
| 41 | 50mm GI pipes for scour pipe |
| 42 | 65mm GI pipe for delivery pipe |
| 43 | 90mmThreaded coupler |
| 44 | 63mm PVC Threaded coupler |
| 45 | 65mm dia GI Tee |
| 46 | 65mm dia GI bend 90 |
| 47 | 65mm dia GI bend (short) |
| 48 | 65mm GI coupler |
| 49 | 65mm GI union |
| 50 | 65mm GI Elbow |
| 51 | 50mm GI union |
| 52 | 50mm GI Elbow |
| 53 | 65mm GI Tee |
| 54 | 65x50mm GI reducer |
| 55 | 75mmx63mm PVC reducer |
| 56 | 65mm GM gate valve |
| 57 | 50mm GM gate valve |
| 58 | 63 mm PVC 4Ksc Pipe |
| 59 | Refilling the foundation with excavated earth including consolidation as directed by the TWAD Board officers |
| 60 | Earthwork excavation and depositing on bank with an intial lesd & lift in hard stiff clay, gravelly soil, shales, murrams earth mixed soil as per SS 20 B for foundation |
| 61 | Sand filling with good river sand including cost & conveyance of all materials to site and all labour charges for curing, compacting etc., complete. |
| 62 | Cement concrete in 1:4:8 mix using 40 mm metal used for foundationincluding cost & conveyance of all materials to site and all labour charges for curing, compacting etc., complete. |
| 63 | Cement concrete in 1:2:4 mix using 20 mm metal used for Wearing Coat including cost & conveyance of all materials to site and all labour charges for curing, compacting etc., complete. |
| 64 | Brick Work in Cement Mortar 1:5 using Country Bricksincluding cost & conveyance of all materials to site and all labour charges for curing, compacting etc., complete. |
| 65 | Plastering with cement mortar 1:4mixto12mmthick including cost and conveyance of all materials to site and all labour charges etc complete. |
| 66 | Filling the stones in soakpit incluiding the cost and conveyance of materials 40mm |
| 67 | Filling the stones in soakpit incluiding the cost and conveyance of materials 20mm |
| 68 | Rcc Precast rings |
| 69 | Ring and RCC Cover Slab |
| 70 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Dec 20, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedDec 26, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 26, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender