Auction Sale Of Scrap And Condemned Bg Surface Wheel Lathe Sr.No.7 Of Cofmov/Ir/S-2843/94/Op-696 Dtd. 28-04-1995 Of Roh Depot Khanalampura(Kjgy)Bg Surface Wheel Lathe Consisting Of Following Items:-1.One Machine Bed Along With 04 Nos (Lubrication Motors)A, jagadhri-Uttar Pradesh

Auction Sale Of Scrap And Condemned Bg Surface Wheel Lathe Sr.No.7 Of Cofmov/Ir/S-2843/94/Op-696 Dtd. 28-04-1995 Of Roh Depot Khanalampura(Kjgy)Bg Surface Wheel Lathe Consisting Of Following Items:-1.One Machine Bed Along With 04 Nos (Lubrication Motors)A.C.,3-Phase,Each Capacity 0.18 Kw.2.Main Drive Head Stock Unit(Lhs) Fitted With 02 Nos.Face Chuck Driver Motors (Rating A.C.,3-Phase,35 Kw Each)3.Main Drive Head Stock Unit(Rhs)Fitted With 02 Nos. Face Chuck Driver Motors (Rating A.C.,3-Phase,35 Kw Each)4.Head Stock Sliding Unit (Lhs+Rhs) Fitted With 02 Nos A.C. Motors (Rating 03 Phase 7.5 Kw Each)5.Compound Slide Fitted With 01 D.C. Motor, 02 Manifold Blocks And 02 Tool Post Slide( Rhs+Lhs).6.Hydraulic Unit Fitted With 03 Nos Ac Motors 03-Phase Each( 02 Motors 3.7 Kw & 01 Motor 1.5 Kw)Along With 01 Radiator Blower Motor Cap.7.5 Kw.7.02 Nos Auxiliary Electric Panels Fitted With Power Contactors Relays Along With 02 Nos Short Starter Resistance Boxes With Electric Wiring & Cables.8.01 Main Electric Panel Fitted With Auxiliary Contactors, Timer, Relay, Electric Wiring, Cables, And Step Down Transformers Of Different Rating Having Copper Winding In Primary And Secondary Coils As Under:-I). Rating 440 V To 220 Volts -01 Nos. Ii). Rating 440 V To 24 Volts - 01 Nos. Iii). Ultra Isolation Rating 415 V To 220 Volts-01 Nos Iv). Feed Synchronizing Rating 220 V To 24 Volts -01 Nos V). Braking Transformer In Auxiliary Panel-01 Nos.Divn Lot No. 19-A/M&P/Scrap/Bg Surface Wheel Lathe/01 Umb/Divn. Vide Sr.Dme/O&F/Umb Letter L.No.116-S/Wp/C&W/Umb/M-4/2023-24 Dt. 06-11-2023.Custodian Of Item :- Sse/Roh/Nr/Kjgy.Lot Qty.= 47.700 Mt Approx (Ferrous Scrap).Non-Ferrous Scrap= Nil Dismantaling :- To Be Done By The Purchaser At His Own Cost.Location :- Of Roh/ Depot Khanalampura Sre, Material Sold On ?As Is Where Is Basis?. Remarks:-[1].Cutting Permission Is Allowed,Providing Safety Of Man- Material & Machine May Be Ensure By Purchaser.All Cutting Equipment/Facility Will Be Arranged By The Purchaser Own His Expenses.(After Following Necessary Fire Prevention)[2] Loading & Dismantled Components/Spares To Be Done By The Purchaser His Own Expenses.[3] Delivery Of Condemned Wheel Lathe Will Be Given Of Actual Weighment. It Will Be Done On Weighbridge Available In The Railway Premises Under The Custodian Of Amm/Kjgy Depot.[4] Delivery Process Will Commence Sharp Between 8.00 To 17.00 Hrs Only And Within The Prescribed Period. [5]. All Labour, Road Mobile Crane Etc Should Be Arranged By The Purchaser His Expenses. The Responsibility Of Any Incident Of Machine And Labour Owned By Purchaser Will Be The Purchaser Solely [6]. If Any Non Ferrous Components Is Seen During Deliver/ Cutting It Will Also Be Taken Back Apart From Excluding Components.

Refer document

Refer document

Refer document