Tender For Additional Alteration And Roof Treatment, Replastering , Periodical To Internal External Walls, Strengthening Of Plinth Protection, Replacement Of Broken Sanitary Fittings For 04 No Single Offrs Accn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Jan 2024
0 days left
EMD
1.14 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jalukie → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Additional Alteration And Roof Treatment, Replastering , Periodical To Internal External Walls, Strengthening Of Plinth Protection, Replacement Of Broken Sanitary Fittings For 04 No Single Offrs Accn
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE ‘A’ PART - I (Repair of Building) |
| 2 | Providing and laying damp proof course 40mm thick with cement concrete 1:2:4 12.5mm size aggregate. |
| 3 | Supplyand mixing water proofing material. |
| 4 | M/L for 12mm thick plaster finished with a floating coat of neat cement mix 1:3 (1 cement: 3 fine sand) |
| 5 | Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of arearespectively, second and fourth courses of roofing felt type 3 grade I (Hessian based self finished bitumen felt) , sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including preparation of surface but excluding grading, complete. |
| 6 | Providing and fixingwhite vitreous chine pedestal type water closet (European type we pan) with seat and lid, 10 litre low level white PVC flushing cistern, including flush pipe, with manually controlled device (hand lever) conforming to 15:7231 with all fitting and fixtures complete, including cutting and making good the walls and floors wherever required. White solid plastic seat and lid, replacing old broken WC. |
| 7 | Providing and fixing wash basin with white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings, 15mm cp brass pillar taps, 32mm CP brass waste of standard pattern, including cutting and making good the walls wherever required basin sige 630x450mm with a pair of 15mm cp brass pillar taps. |
| 8 | Providing and fixing 600x450mm bevelled edge mirror of superior glass(of approved quality complete with cp brass screws and washers complete.Rectangular shape 453x357 mm |
| 9 | Providing and fixing 60x120x5mm glass self with edge round off supported on anodised aluminium angle frame with cp brass brackets and guard rail complete fixed with 40mm long screws raw plugs etc complete. |
| 10 | Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete 40mm die. |
| 11 | Supply and fixing 30mm thick factory made poly vinyl chloride (PVC) door shutter made of style and rails of a UPVC hollow section of size 60x30mm and wall thickness 2mm (=0.2mm) with in bult decorative moulding edging on are side.The lock rail made up of H section, a UPVC hollow section of size 100x30mm and 2mm (+0.2mm) wall thickness fixed to the shutter styles by means of plastic/galvanised MS U cleats. The shutter frame filled with a UPVC multi chambered single panel of size not less than 620mm, having overall thickness of 20mm and (1mm+0.1mm) wall thickness. The Panelsfilled vertically and tie bar at two places by inserting horizontally 6mm galvanised MS rod and fastened with nuts and washers complete as per manufacturers specification and direction of E/C. |
| 12 | Providing and fixing of un plasticised PVC connection pipe with brass union 45 cm long 15mm bore. |
| 13 | Providing and fixing of CP brass bib cock 15mm die. |
| 14 | Providing and fixing of CP brass angle value 15mm. |
| 15 | Providing and fixing of CP brass stop cock(Concealed) 15mm. |
| 16 | Providing and fixing of CP brass shower rose with 15 or 20 mm inlet,100mm die. |
| 17 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping sand paperingand preparing the surface smooth including necessary repairs to scratches etc complete in walls and ceiling. |
| 18 | Distempering with oil bound washable distemper of approved brand and manufacturer to give and even shade on old work (one or more coats). |
| 19 | Finishing wall with premium Acrylic smooth exterior pain with silicone additives if required shade on old works (Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give and even shade, one or more coats on old works |
| 21 | Painting with aluminium paint of approved brand and manufacture to give an even shade, one or more coats on old works. |
| 22 | Providing and laying in position cement concrete of specified grade excluding the cost of cantering and shuttering, 1:3:6, 20 mm graded aggregate in plinth protection. |
| 23 | Renewing glass panes, with putty and nail wherever necessary including racking out the old putty, 4mm thick float glass panes. |
| 24 | Renewal of old putty glass panes 50x2(0.50+0.45) – 2(0.50+0.45) =1.90 |
| 25 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 26 | Providing and fixing 15mm GI union in existing GI pipe including cutting and threading the pipe and making long screws including excavation refilling the earth or cutting of wall and making good the same complete wherever required. |
| 27 | Providing and fixing 20mm GI union in existing GI pipe including cutting and threading the pipe and making long screws including excavation refilling the earth or cutting of wall and making good the same complete wherever required. |
| 28 | Providing and fixing 25 mm nominal bore gun metal gate value with CI wheel of approved quality (Screwed end). |
| 29 | Providing and fixing 40 mm nominal bore.gun metal gate value with CI wheel of approved quality (Screwed end). |
| 30 | Providing and fixing 20 mm nominal dia ball value(brass) of approved quality high or low pressure with plastic bloats complete. |
| 31 | Dismantling of old plaster or skirting raking out joints and clearing the surface for plaster including disposal of rubbish to the dumping ground within 50 mtr lead. |
| 32 | 20 mm thick cement plaster of mix 1:4 (1 cement: 4 fine sand) |
| 33 | Neat cement punning upto plinth level |
AI Tender Summary
Tender Timeline
Dec 19, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJan 08, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 09, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender