Tender For Widening And Improvement Of Bhawali Bypass Part-2 (1.5 Lane) From Bhawali Sanitorium To Nainibend In Vidhansabha Nainital Of Distt Nainital Under C.M Ghoshna No. 265 2023
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Jan 2024
0 days left
EMD
22.50 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhowali → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Widening And Improvement Of Bhawali Bypass Part-2 ( 1.5 Lane ) From Bhawali Sanitorium To Nainibend In Vidhansabha Nainital Of Distt Nainital Under C.M Ghoshna No. 265 2023
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Jan-2024 | Change in date of opening of tender | Date | 16-Jan-2024 |
| 2 | 12-Jan-2024 | Selection of Site for Hot Mix Plant | Technical Bid | 16-Jan-2024 |
| 3 | 15-Jan-2024 | Technical Bid Corrigendum | Technical Bid | 16-Jan-2024 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation for retaining, breast walls etc, in all types of soils and rocks including all lead, lift and disposal upto 5000 m of surplus material including loading unloading, cartage all as per direction of engineer - in - charge, as per drawing and technical specifications Clause 305.1 of MORD Specifiction |
| 2 | Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction |
| 3 | Random Rubble Stone Masonry laid dry , in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction |
| 4 | Hand Packed stone filling in back of wallls including cost of all materials, royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications) |
| 5 | Granular Sub-base with Close Graded Material (Table:- 400-1)Plant Mix Method (Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 ) forgrading- I Material |
| 6 | Wet Mix MacadamProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance ofdiversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. (By Mechanical Means ) |
| 7 | Medium porosityProviding and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502. |
| 8 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical SpecificationClause 503. |
| 9 | Providing and laying Dense Bituminous Macadam with the use of batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.25% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects Grading II - 26.5mm nominal size |
| 10 | Providing and laying Bituminous Concrete with the use of batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects |
| 11 | Maintenance of Earthen shoulder (filling with fresh selected soil)Making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 m as per technical specification Clause 1903 |
| 12 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 13 | Surface Drains in Ordinary RockConstruction of unlined surface drain of average cross-sectional area 0.4 sqm in ordinary rock to specified lines, grades, levels and dimensions as per approved design and Technical Specification Clause 307. Excavated material to be used in embankment at site.Mechanical Means |
| 14 | Providing and fixing of single mould twin shank reflective road studs of ‘category A’ Raised pavement markers made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall conform to ASTM D4280. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 and fixed to the road surface using the adhesive recommended by the manufacturer. Two cylindrical Polymer Shanks of not less than 20 mm diameter and not less than 30 mm length shall be molded in the RPM body. The reflective raised pavement markers shall also confirm to the MORTH circular No RW / NH. 33023/10/ 97-DO.III and the length ,height and width of the body shall not be less than 100 mm, 15 mm and 90 mm and base of marker shall be flat within 1.3 mm and outermost faces of configuration of marker shall not deviate more than 1.3 mm from a flat surface. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. The marker shall withstand flexural strength of 909 kgf force in accordance with ASTM D4280. Marker lenses shall be moulded of Polycarbonate or methyl methecrylate conforming to ASTM D788. The area of each retro reflectory surface shall not be less than 13.0 sq.cm. The slope or retro – reflectory surface shall be 35 + 5 degree to base. Each reflector shall have a CIL not less than values specified in table 1 of MORTH Section 800 page no. 353 and should accompany two year warranty for satisfactory field performance from the |
| 15 | Retro-Reflectorised Traffic Signs(Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) 900 mm equilateral triangle |
| 16 | 600 mm circular |
| 17 | 800 mm x 600 mm rectangular |
| 18 | Direction and Place Identification signs upto 0.9 sqm size board Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 |
| 19 | Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 PCC Grade M 20 |
| 20 | Type - A, \"W\" : Metal Beam Crash BarrierProviding and erecting a \"W\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 ( if Concrete Required for Vertical post Fixing will be paid extra) |
| 21 | Construction of Parapets plum concrete with 40% plum(approved stone or maximum size 200 mm)& 60% 1:2:4 cement concrete and with base P.C.C. M10including supply of all material, labour, T&P etc. required for proper completion of the work (As per PWD Uttarakhand specifications as per drawing wide letter no. CEK No. 3812/17 M-K/08 dated 10/04/2011 as directed by engineer in charge |
| 22 | White washing of parapet walls of CD work and tree truncksWhite washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915 |
| 23 | Excavation in foundation in all type ofsoiland rock as met at site of work including lead and lift and disposal of suplus earth upto 5000 m or as directed by engineer incharge, including loading unloading, cartage and all supply of all materials, labour, T&P & royalty and all other taxes etc required for proper completion of the work. (As per PWD Uttarakhand specifications) |
| 24 | Providing and layingplain concrete M-10 (Nominal mix 1:3.6) in levelling course below open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203, including supply of all materials, labour, T&P & royalty and all other taxes etc required for proper completion of the work. (As per PWD Uttarakhand specifications) |
| 25 | Random rubble masonary laid dry in breast wall, retaining wall etc, including supply of all materials, labour, T&P & royalty and all other taxes etc required for proper completion of the work. (As per PWD Uttarakhand specifications) |
| 26 | Random Rubble Stone Masonry laid in 1:5 cement and sand mortar in scuppers, including supply of all materials, labour, T&P & royalty and all other taxes etc required for proper completion of the work. (As per PWD Uttarakhand specifications) |
| 27 | Providing and laying reinforced cement concrete in substructure as per drawing and technical specifications Clauses 800, 804,805,807,1202 and 1204 R.C.C. grade M 25 and as directed by engineer in charge, including supply of all materials, labour, T&P & royalty and all other taxes etc required for proper completion of the work. (As per PWD Uttarakhand specifications) |
| 28 | Supplying, fitting, and placing HYSD bar reinforcement (Fe 415)in suberstructure complete as per drawing and technical specifications Clauses 1002, 1005,1010 and 1202 and as directed by engineer in charge, including supply of all materials, labour, T&P & royalty and all other taxes etc required for proper completion of the work.(The reinforcement steel shall be procured from original (primary) steel producers as per clause no. 2011.3.1 of MORD specifications (First Revision\"2014) and IS 1786:2008 clause no. 1.6) |
| 29 | Hand packed stone fillingin back ofbreast walls, retaining wallsscuppers, etc, including supply of all materials, labour, T&P & royalty and all other taxes etc required for proper completion of the work. (As per PWD Uttarakhand specifications) |
| 30 | Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction |
| 31 | Providing and Laying of Mechanically Woven Double Twisted Hexagonal shaped Gabions (Zinc plus PVC coated), of size 3mX1mX1m with two diaphragms at 1m interval, having mesh opening 100mmx120 mm, mesh wire diameter 2.7mm/3.7mm, edge/selvedge wire diameter 3.4/4.4 mm and lacing wire diameter 2.2/3.2 mm. (The work includes filling boulders in the gabions) |
| 32 | Hill side cutting for construction of road in all type of soil and rocks as met at site, as per plan & L - Section including uprooting and cutting of bushes, dressing of road surface, removal and disposal of surplus / excavated material and debries up to 5000 m distance(including loading,unloading and disposal)from road side as directed by Engineer-in-Charge as per P.W.D. specificationand also including supply of all materials, labour, T&P, royalty and all other taxes etc required for proper completion of the work. |
| 33 | Construction of coolie walling including supply of all material, labour, T&P etc. required for proper completion of the work as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications) |
AI Tender Summary
Tender Timeline
Jan 12, 2024
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 16, 2024
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jan 16, 2024
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jan 16, 2024
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 16, 2024
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 08, 2024
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender