Indian Institute Of Technology-IITB has published Tender For Providing And Fixing Temporary Prefabricated Security Guard. Submission Date for this Tender is 03-01-2024. Security Guard Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-01-2024 |
| Sl. No. | Item Description |
| 1 | 1) E A R T H W O R K |
| 2 | 1.1) Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. |
| 3 | 1.1.1) All kinds of soil |
| 4 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 5 | 2) CONCRETE WORK |
| 6 | 2.1) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 7 | 2.1.1) 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | 3) MASONRY WORK |
| 9 | 3.1) Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 10 | 3.1.1) Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 11 | 4) ALUMINIUM WORK |
| 12 | 4.1) Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 13 | 4.1.1) 250x16 mm |
| 14 | 4.2) Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 15 | 4.2.1) 250x10 mm |
| 16 | 4.3) Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 17 | 4.3.1) 125 mm |
| 18 | 5) STEEL WORK |
| 19 | 5.1) Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 20 | 5.2) Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 21 | 5.2.1) Hot finished welded type tubes |
| 22 | 6) FINISHING |
| 23 | 6.1) Applying priming coat: |
| 24 | 6.1.1) With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood. |
| 25 | 7) Painting with aluminium paint of approved brand and manufacture to give an even shade : |
| 26 | 7.1) Two or more coats on new work |
| 27 | 8) DISMANTLING AND DEMOLISHING |
| 28 | 8.1) Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 29 | 8.1.1) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 30 | 8.2) Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 31 | 8.2.1) In cement mortar |
| 32 | 8.3) Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 33 | 9) ROAD WORK |
| 34 | 9.1) Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge. |
| 35 | 9.2) Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. |
| 36 | 9.2.1) Made of G.I. wire of dia 4 mm |
| 37 | 9.3) Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 38 | 9.3.1) For fixed portion |
| 39 | 9.3.1.1) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 40 | 9.4) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 41 | 9.4.1) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 42 | 9.5) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 43 | 9.5.1) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 44 | 10) COMPOSITE PANEL WORK |
| 45 | 10.1) Providing and fixing of customized 50mm thick PPGI Puff panel for wall( Sandwiched with high density polyuretharene foam in between two pre painted galvanised iron sheet panel made of 0.50mm thick JSW sheet 40+/- 2kg/cubic meter density as per Manufacturerspecifications) and fixing door of size 0.75x2.10 mtr with the same material as of wall including all fittings & fixtures for locking arrangement and including making provision for opening for doors, windows, ventilators. electrical conduits, switch boards etc and cutting to size and shape wherever required complete in all respect at all level including loading unloading and cost offrame structure support of wall etc. as per direction of Engineer-In-Charge.( Note :- Rates are inclusive of GST, all taxes & cartage etc. and the payment shall be made based on the actual exposed finish area (one side only) of the panel with reduction of opening of door/ window / ventilator) |
| 46 | 10.1.1) 50mm thick PPGI Puff panel for wall |
| 47 | 10.2) Providing and fixing customized 40/63mm thick corrugated PPGI Puff panel for roof ( Sandwiched with high density polyuretharene foam in betweem two pre painted galvanised iron sheet panel made of 0.50mm thick JSW sheet 40+/- 2kg/cubic meter density as per Manufacturerspecifications) with proper roof slope including necessary fittings & fixtures and cutting to size and shape wherever required complete in all respect at all level including loading unloading and cost offrame structue support of roof purlins, rafters and trusses etc. as per direction of Engineer-In-Charge .( Note :- Rates are inclusive of GST, all taxes & cartage etc and the payment shall be made based on the actual exposed finish area (one side only) of the panel.) |
| 48 | 10.2.1) 40/63mm thick corrugated PPGI Puff panel for roof |
| 49 | 11) WOOD AND P.V.C. WORK |
| 50 | 11.1) Providing and fixing 18mm thick commercial ply wood sheet (ISI marked) Overframe work of cabin floor and platform including necessary glue and nails etc. complete as per directions of Engineer-in-charge. |
| 51 | 11.2) Providing and fixing homogeneous polyvinile chloride sheet/tile of approved colour and shade, in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer like fevicol SR 998 or equivalent including rolling with light wooden roller weighing about 5 kg. all complete as directed by Engineer-in-charge. |
| 52 | 11.2.1) 2mm thick Sheet |
| 53 | 11.3) Providing & fixing sliding wheel roller set of approved make or equivalent in aluminium sliding window shutters for opening and closing as per direction of Engineer-in-charge. |
| 54 | 11.4) Providing & fixing crescent lock of approved make or equivalent in aluminium sliding window shutters for opening and closing as per direction of Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
