|
| 1 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 2 | 300x16 mm |
| 3 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 4 | 300x10 mm |
| 5 | Providing and fixing 6mm thick commercial ply board in partitions, side walls etc., including providing fixing second class teak wood battens of size 40mmx6mm at 1.00m center to center horizontally and vertically with nails complete as directed. |
| 6 | Providing and fixing 18 mm thick BWR grade commercial veneered ply wood in partitions / doors / shelves etc., using adhesive and MS wire nails as directed. |
| 7 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 8 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 9 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 10 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 11 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 12 | Providing and fixing aluminium handles for aluminium doors with necessary SS screws : |
| 13 | 150 mm size. |
| 14 | Supplying and fixing white lining cloth for ceiling to give an even look, as directed. |
| 15 | Supply ready made computer tables of size 1500mm X 600mm X 760mm height with provision of tray for keeping key-board, space for Monitor, CPU, UPS, printer etc. as per requirement. Necessary sliding drawers to be provided in the tables for keeping stationary / cash etc., (Same be Handed Over to Marketing Wing after Completion of Exhibition) |
| 16 | Providing and fixing glow-sign board of size 3.05m x 4.85m (excluding door of size 1.5x2.10m) for stall at Exihibition by proving necessary MS frame work and back-light with LED tube lights with necessary wiring, front side with flexi board of approved design. |
| 17 | Proving and laying red carpet on the floor of stall inside and out side as directed. |
| 18 | Supplying rectangular tent of size 20\" x 10\" (approximate size) for one day including fixing with necessary posts, ropes etc. and removing the same as directed. |
| 19 | Levelling undulation in the proposed stall area including front side with cement mortar in 1:3 (1 cement: 3 mortar) appr area 340 sft. |
| 20 | Proving and placing 300 mm dia earthen or plastic flower pot with potting mix and planted a shrub with bottom plate to collect waste water. |
| 21 | Providing and fixing Star Flex Front Lit and Back Lit with Designing for stall at Exihibition as per the Directions of Engineer-in-charge |
