}

Tender For Construction Of Civil Structure For Providing Drinking Water Facility Near Transit Shed No.1 Northside-Re Tender, mangalore-Karnataka

New Mangalore Port Trust has published Tender For Construction Of Civil Structure For Providing Drinking Water Facility Near Transit Shed No.1 Northside-Re Tender. Submission Date for this Tender is 08-01-2024. Construction Material Tenders in mangalore Karnataka. Bidders can get complete Tender details and download the document.




Tender Notice

41179299
Tender For Construction Of Civil Structure For Providing Drinking Water Facility Near Transit Shed No.1 Northside-Re Tender
Tender
Indian
Karnataka
Mangalore
08-01-2024

Tender Details

Tender For Construction Of Civil Structure For Providing Drinking Water Facility Near Transit Shed No.1 Northside-Re Tender; 1 Earth Work Excavation By Manual Means For Drains, Canals, Waste Weir, Draft, Approach Channels, Key Trenches, Foundation Of Bridges And Such Simillar Works In All Kinds Of Soils, As Per Drawing And Technical Specifications, Including Setting Out, Shoring, Strutting, Barricading, Caution Lights, Removal Of Stumps And Other Deleterious Matter, Excavated Surface Leveled And Sides Neatly Dressed Disposing Off The Excavated Stuff Or Sorting & Stacking The Selected Stuff For Reuse In A Radius Of 50 M And Lift Upto 1.5 M Including Cost Of Labour, Tools & Other Appurtenaces Required To Complete The Work.In All Kinds Of Soils Depth Upto 1.5 M 2 Supplying, Filling, Spreading & Leveling Stone Boulders Of Size Range 5 Cm To 20 Cm, In Recharge Pit, In The Required Thickness, For All Leads & Lifts, All Complete As Per Direction Of Engineer-In-Charge. 3 Providing And Laying In Position Plain Cement Concrete For Levelling Course For All Works In Foundation. The Granite / Trap / Basalt Crushed Graded Coarse Aggregates And Fine Aggregates As Per Relevant Is Codes Machine Mixed, Laid In Layers Not Exceeding 150 Mm Thickness, Well Compacted Using Plate Vibrators, Including All Lead & Lifts, Cost Of All Materials Of Quality, Labour, Usage Charges Of Machineries, Curing, And All The Other Appurtenances Required To Complete The Work As Per Technical Specifications. ( The Cost Of Steel Reinforcement Shall Be Paid Separately ) Mix 1:3:6 ( M10 ) Using 40 Mm Nominal Size Graded Crushed Coarse Aggregates 4 Refilling Available Earth Around Trenches / Pipelines, Cables In Layers Not Exceeding 20 Cms In Depth, Compacting Each Deposited Layer By Ramming After Watering With A Lead Upto 50 M , And Lift Upto 1.5 M. Including Cost Of All Labour Complete As Per Specifications 5 Providingand Constructinglaterite Size Stone Masonryincludingcost And Conveyance Of All Materials Curing Etc Complete As Per Specification. I.S. 3620 / 1979Having Compressivestrength Not Less Then 3.5 N / Mm2 For Saturated Dry Samples. For Foundation In Cm 1:6 6 Providing And Laying In Position Reinforced Cement Concrete For All Sub Structures Of Building, Irrigation Works, Sub Structure Works Of Bridges, Drain Works & Other Parallel Works From 0.50M To 3.50 M Height. The Granite / Trap / Basalt Crushed Graded Coarse Aggregates And Fine Aggregates As Per Relevant Is Codes Machine Mixed With Super Plasticisers, Laid In Layers, Well Compacted Using Needle Vibrators, Providing Weep Holes Wherever Necesary, Including All Lead & Lifts, Cost Of All Materials Of Quality, Confirming To The Requirements Of Relevant Is Codes, Labour, Usage Charges Of Machinery, Curing And All Other Appurtenances Required To Complete The Work As Per Technical Specifications Including Providing & Removing Formwork, Centering & Scaffolding ( The Cost Of Steel Reinforcement To Be Paid Separately ) Mix 1:2:4 ( M15 ) Using 20 Mm Nominal Size Graded Crushed Coarse Aggregates 7 Providing Thermo Mechanically Treated Bars Of Grade Fe-550 Steel Reinforcement For Rcc Work Including Straightening, Cutting, Bending, Placing In Position, Binding And Anchoring To Adjacent Members Wherever Necessary Complete As Per Design Including Cost Of Material, Labour, Usage Charges Complete As Per Specifications. ( The Laps And Wastages Shall Not Be Measured Separately ) 8 Providingand Constructinglaterite Size Stone Masonryincludingcost And Conveyance Of All Materials Curing Etc Complete As Per Specification. I.S. 3620 / 1979Having Compressivestrength Not Less Then 3.5 N / Mm2 For Saturated Dry Samples. For Superstructure In Cm 1:6 9 Providing 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Finished With A Floating Coat Of Neat Cement Of Mix 1:3 ( 1 Cement: 3 Fine Sand ) Including Rounding Off Corners Wherever Required Smooth Rendering, Providing And Removing Scaffolding, Including Cost Of Materials, Labour, Curing Complete As Per Specifications And As Per Directions Of Engineer-In-Charge. 10 Providing And Laying Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge, Anty Skid Finish Granite Stone Slab Black, Cherry Red, Brown, Cat Eye, River Pink Or Equivalent 11 Providing And Fixing 18 Mm Thick Gang Saw Cut Granite Of Any Color And Shade, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Up, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels Area Of The Slab = 0.50 M2 12 Providing & Fixing Factory Made Pvc Door Frame Of Size 50X47mm With A Wall Thickness Of 5Mm, Made Out Of Extruded 5Mm Rigid Pvc Foam Sheet Metered Cut At Corners & Jointed 2 No.S Of 150Mm Long Brackets Of 15X15mm M.S Square Tube, The Entire Door Frame To Be Reinforced With 19X19mm M.S Square Tube Of 19 Gauge. The Door Frame To Be Fixed To The Wall Using M.S. Screws Of 65 / 80Mm Size Complete As Per Manufacturers Specification & Direction Of Engineer-In-Charge 13 Providing & Fixing 30Mm Thick Factory Made Rigid Foam Prelam Panelled Door Shutters Made From M.S. Tube Of 19X19mm, 19 Gauge For Stiles And 15X15mm For Top & Bottom Rails, Covered With Heat Moulded Prelaminated Pvc C Channel Of 5Mm Thick Sheet & 30X50mm Wide To Form Stiles & 5Mm Thick & 75Mm Wide Prelaminated Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & 5Mm Thick, 20Mm Wide Cross Pvc Sheet As Gap Insert For Top Rail & Bottom Rail, Panelling Of 5Mm Thick Pvc Sheet Prelaminated On Either Side Fitted In The M.S. Frame, Sealed To The Stiles & Rails With Pvc Designer Beading On Either Side & Joined Together With Solvent Cement Adhesive Etc., Complete As Per Manufacturers Specification & Direction Of Engineer-In-Charge Fixed To Frames With 3 Nos Of 75Mm Aluminium Hinges, With Both Side Prelam 14 Providingand Applying Painting In Two Coats With Plastic Emulsion Painton Wall Surface To Give An Evenshade After Throughly Brushing The Surface, Free From Mortar Drops And Other Foreign Matter Including Preparing The Surface Even And Sand Paper Smooth, Cost Of Materials, Labour, Complete As Per Specifications. - With Primer 15 Providing And Fixing To Wall, Ceiling And Floor Unplasticised Pvc Pipes 10.00 Kgs / Sq.Cmworking Pressure 25Mm Outside Diameterwith Pipe Fittings, Wall Clips, Making Good The Wall, Ceiling And Floor, Including Cost Ofall Materials, Labour Charges, Hom Of Equipments And Testing Complete As Per Specifications. 16 Providing And Fixing To Wall, Ceiling And Floor Unplasticised Pvc Pipes 10.00 Kgs / Sq.Cmworking Pressure 16Mm Outside Diameter With Pipe Fittings, Wall Clips, Making Good The Wall, Ceiling And Floor, Including Cost Ofall Materials, Labour Charges, Hom Of Equipments And Testing Complete As Per Specifications. 17 Providing And Fixing To Wall, Ceiling And Floor, Medium Density Polyethylene Pipes 6.00 Kgs / Sq.Cmworking Pressure 50Mm Outside Diameter With Special Flange, Compression Type Fittings, Wall Clips, Making Good The Wall, Ceiling And Floor Including Cost Ofall Materials, Labour Charges, Hom Of Equipments And Testing Complete As Per Specifications. 18 Providing And Fixing Ci Nahani Trapconforming To Isi Specifications And Construction Of Cistern In Cc 1:2:4 As Per Directions ( Rate Is Inclusive Of Cost Of Materials And Fixtures And Conveyance Of Materials To Work Spot ) . 10Cms X 7.5 Cms 19 Providing & Fixing Stainless Steel 100Mm Grating, Including Cost Of Materials, Fixing Charges And All Other Incidental Charge Etc. Complete, As Directed By The Engineer In Charge 20 Supply & Fixing Of Pvc Ball Valve Of 25Mm Size Including Cost Of Conveyance, Labour. T & P & All Incidential Charges Etc. Complete As Directed By Engineer In Charge 21 Supplying& Fixing Of Float Valve Of Size 25Mm Including Conveying The Materials To Workspot Including Cost Of All Materials Etc. Complete, As Directed By Engineer In Charge 22 Providing And Fixing Brass Bib Cock Of Approved Quality : 15 Mm Nominal Bore 23 Providing And Placing On Terrace ( At All Floor Levels ) Polyethylene Water Storage Tank Is12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes, Including Cost Of All Materials, Labour, Transportation, Hom And Testing Complete As Per Specifications And As Directed By The Engineer In Charge 24 Providingand Fixingin Positionaluminium Windows And Ventilators As Per Approved Drawingswith Sliding Shutters Using Doubletrackwindowframesectionofsize 61.85X31.75Mm. With 1.2Mm Thick, Bottom Section Weight 0.695 Kg / M, Sides And Top Sections 1.3 Mm. Thick Weight 0.659 Kg / M; And Shutter Comprising Top And Bottom Section Of Size 40Mmx18mm, 1.25Mm Thick 0.417 Kg. / M;Shutter Outer Side 40Mmx18mm, 1.25Mm.Thickweight 0.417 Kg / M, Shutter Interlock Section 40Mmx26.7Mm, 1.1Mm Thick, Weight 0.469 Kg / M.The Shutters Mountedon Nylonrollerswithapprovedqualityof Fixturessuchas Aluminium Handles Tower Bolts Etc.; And Providing And Fixing 5.5Mm Thick Plain Glass For Shutters Fitted With Rubber Beading Aluminiumsections Including Cutting To Required Length, Joints Mitred Subdividing The Frame Tenonned And Rivetted In The Assembledframe Stiffened With End Clips At Corners Angles Etc, And Fixed To The Walls, Lintels, Floor Beams / Cills As The Case May Be With Necessarysteel Screws, Rawl Plugs, Or Teak Wood Gatties Includingcutting Masonryor Concreteand Making Good The Original Surface Using Cement Mortar, Aluminium Sections Pretreated For Removal Of Any Specification No. Kbs. Using Aluminium Section Powdered Coated To A Minimum Of 60-70 Microns With Exterior Durable Pure Polyester Grade Powder Of Approved Quality. 25 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding

Key Value

Document Fees
INR 560 /-
Tender Value
INR 3.66 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail