|
| 1 | Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes, laying of cable etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed. |
| 3 | Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed. |
| 4 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 5 | M&L Pre- paintedhot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and as directed. |
| 6 | M&L Pre- paintedhot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in Ridges, fixed with self tapping screws as specifiedcomplete all as specified and as directedd. Note:To be executed for provision of ridges and hips. |
| 7 | M&Lfor rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (GdeE- 250) quality Acomplete all as specified and as directedd. |
| 8 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 9 | S & F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all asspecified anddirected. |
| 10 | S & F Solid PVC Wall Lining consisting of 5 mm thick single side prelam wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all asspecified andas directed. |
| 11 | S&F suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic)in & including a grid of GI system duly suspended with 4mmdia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed. |
| 12 | M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed. |
| 13 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cmthick ( Below or above ground)complete all as specified and directed. |
| 14 | M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smoothwithout using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic jointfilling at every 3m length and at corners complete all as specified and as directed. |
| 15 | M&L for RCC type1:2:4, type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelvesetc. complete all as specified and as directed. |
| 16 | Use and waste formwork to soffits of suspended slab such as roof slabs floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) in rough finished flat surfaces of concrete complete all as specified and as directed. |
| 17 | M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed. |
| 18 | Demolition of brick or stone masonry work built in cement mortarincluding all quoins, arches, pillars etc complete all as specified and as directed. |
| 19 | M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed. |
| 20 | M&L for brick work with subclass ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed. |
| 21 | Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 22 | M & L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 23 | M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thickmixed with water proofing compound (@ 3% by weight of cement or as per manufacture\"s instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note :Water proofing compoundwill be measured and paid separately as \"Supply only\". |
| 24 | Supply only integral water proofing compound complete all as specified and as directed. |
| 25 | M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat ofprimer complete all as specified and as directed. |
| 26 | M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat ofprimer complete all as specified and as directed. |
| 27 | M&L for complete removal of old treated surfaces on wallsand applying one coat of alkali resistant primer, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as specified and directed. |
| 28 | M&L for complete removal of old treated surfaces on wallsand applying one coat of alkali resistant primer, sanding the surfaces till smooth finish is obtained and finally applying two cement base paint complete all as specified and as directed. |
| 29 | M & L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed. |
| 30 | M&Lfor preparation of old painted surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 31 | M & L for preparation of new steel surface over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 32 | M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 33 | Dismantling timber scantling 40Sqcm and over in section as in unframed workin any position complete all as specified and as directed. |
| 34 | M&L for 2nd class hard wood, in scantlings, clean sawn timber as in un framed work complete all as specified and as directed. |
| 35 | Taking down shutter of any descriptionarea n.exc 1 sqmeach including builders hardware complete all as specified and as directed. |
| 36 | Taking down shutter of any descriptionarea exc 1 sqm but n exc 2 Sqm each including builders hardwarecomplete all as specified and as directed. |
| 37 | S&F powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and asdirected |
| 38 | S&F three track aluminium sliding window with approved make of following extruded section of anodised glazed shutter as per Standard Engineering practices including all other accessories complete like 5.00 mm thickglass panes, rubber beading, etc. complete all as specified and as directed.(Refer Jindal Cat M-2016 )Aluminium sections : \"A\" series (i) Shutter bottom &top :- 37.50 x 15 x 1.3 mm thick (20690) (ii) Shutter interlock :- 37.50 x 23 x 1.3 mm thick (20689) (iii) Shutter side (Handle) :- 37.50 x 23 x 1.3 mm thick (20689)(iv) Frame bottom:- 75 x 26 x 1 mm thick (20671)(v)Frame top and sides :- 75 x 26 x 1 mm thick (20672) |
| 39 | S & Fanodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necssary joining cleats,glazing clips,ruber neoprene packing, handle 2 Nos in Each door, hinges, anodised aluminium snap bidding, screw etc. complete all as specified and directed.Note: door closer shall be measured and paid seperatly. |
| 40 | S & F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed. |
| 41 | S & F 4mm thick sheet glass, ordinary quality and glazing with oil putty in squareexc 0.5 sqm in each pane complete all as specified and as directed. |
| 42 | S&FAluminium chequered grill with aluminium anodized of diamond shape with 6 mm dia section and mesh of size 75 x 75 mm in aluminium \"Y\" channel and aluminium flat 25 mm wide fixed with aluminium screws complete all as specified and as directed. |
| 43 | S & F floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and as directed. |
| 44 | S&F factory made solid PVC door frame of size50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed. |
| 45 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stills and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications as catered in SSR Part – II 2004 complete all as specified and directed. |
| 46 | S & F 100 mm size stainless steel butt hinges, complete all as specified and as directed. |
| 47 | S&F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 48 | S&F 100 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed. |
| 49 | S & F prelaminated particle board 18/19mm, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws as in pelmet box complete all as specified and as directed. |
| 50 | S & F in repairs 20mm to 25mm dia stainless steel, chromium plated tubular curtain rod fancy type including brackets, stops, rollers etc complete all as specified and as directed. |
| 51 | Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing rubbish off the premises complete all as directed. |
| 52 | M & L for vitrified ceramic tiles, light shade, 10mm thick (square/rectangular) area of each tile notexceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 15mm thick screed bed in cement mortar 1:4complete all as specified and as directed. |
| 53 | M & L for vitrified ceramic tiles, light shade, 10mm thick (square/rectangular) area of each tile notexceeding 0.36 sqm, in skriting dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 54 | M&L for 100 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 55 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including40 mm thick PCC sub base in cement mortar(1:2:4) type B0 (using 12.5mm graded stone aggregate) and screed bed of 15 mm thick in cement mortar (1:4) complete all as specified and as directed. |
| 56 | M&L for glazed light coloured/printed ceramic tiles 350x250x7mm/450x350x7mm thick in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match colour of tiles, over and including 10 mm thickrenderingincement mortar 1:4 complete all as specified and as directed. |
| 57 | S & F 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 58 | M&L for chequered cement concrete tiles in floor, area exc 0.06 Sqm but not exc 0.11 Sqm, 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with colour pigment to match with the tiles over and including screed bed of 15mm thick cement mortar (1:6) including dismantling of old tiles of any description complete all as specified and as directed. |
| 59 | S & F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 60 | S & F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 61 | Cutting holes in brick wall built in cement mortar for inserting hold fastfor depth of embedded portion exc one brick and n.exc two brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1complete all as specified and as directed . |
| 62 | M & L for Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth complete all as specified and as directed. |
| 63 | S&Fbib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 64 | S&F stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directe. |
| 65 | S&F tubular towel Rail of 20mm dia and 60cm in length, D shaped, with brass chromium platedbrackets complete all as specified and as directed. |
| 66 | S&F soap dish chromium plated fixed to wall with chromium plated brass screws and plastic cleats complete all as specified and as directed. |
| 67 | S & F glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. |
| 68 | S & F600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6mm thck AC board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 69 | S & F sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 914 mm x 460 mm x 203 mm bowl size 405 mm x 354 mm x 203 mm complete all as specified and as directed. |
| 70 | S & Fvitreous china wash hand basin with padestal,white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium platedsuitable for wash hand basins, with long screwed shanks and fly nuts andPVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed. |
| 71 | S & F 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets,PVC connection pipe 15mm dia, 600mm long etc complete all as specified and as directed. |
| 72 | S & Fvitreous china wash down water closet (pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed |
| 73 | S & F 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches complete all as specified and as directed. |
| 74 | M & L for concrete bed in cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) for drain pipes, 110 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed. |
| 75 | S & F110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 76 | S & F 110 mm dia PVC (SWR) bends of any radius complete all as specified and as directed. |
| 77 | S & F 110 mm dia PVC (SWR) bends of with access door any radius complete all as specified and as directed. |
| 78 | S & F 110mm bore PVC ( SWR)junction, double (T) equal or unequal complete all as specified and directed. |
| 79 | S&F Grating doom 100 mm dia of PTMT (min. weight 25 gms) complete all as specified and as directed. |
| 80 | S & F 110mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 81 | Taking down carefully any type of point wiring (light, fan, bell, socket or power), complete excluding fittings but includingswitches, ceiling roses, pendants, regulators, sockets, etc.and making good disturbed surfaces of walls, ceiling, floors etc to match with existing surface complete all as specified and as directed. |
| 82 | M&L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathedFRLS cable, 1100 volts grade IS-694marked, with multistranded copper conductors and earthcontinuity wire with 1.5 Sqmm copper conductor cable (including connecting to earth dolly)laid/fixed with and including PVC Casing and Caping on walls/ceiling, and with PVC switch board for mounting switches/socket etc for one light/fan/exhaust fan point controlled by one number one way 5 Amp switch complete all as specified and as directed. |
| 83 | Allas per item serial No 82here-in-before butfor One 3 pin 5 Amp switch socket outlet on independent board. |
| 84 | All as per item serial No 82 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cableand earthcontinuity wire with 2.5 Sqmm cable for 6 pin 15 Amp socket outlet on independent board. |
| 85 | S & F switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and as directed. |
| 86 | S & F switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as specified and as directed. |
| 87 | S & F switch socket combination, multipurpose, 2 in 1, 6 pin, 5 & 16 Amp flush type complete all as specified and as directed. |
| 88 | S & F ceiling rose surface bakelite, 65x50mm three terminal complete all as specified and as directed. |
| 89 | S&F in repairs, LED box type fitting pre-wired including LED tube 1x20W connecting up with aluminium housing and sheathed 1100 volt grade flexible copper cable & fix on PVC blockcomplete all as directed.Make:- Jaquar Model-LGLZ01X020XC/ LGLZ01X020XN/LGLZ01X020XW or Havells Model-LUMILINEPLUSBS20WLED865SPCSS or equivalent model of make Philips /GE/Crompton |
| 90 | S&F 35/36watt LED recessed mountedluminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling and fixture size in mm (LxWxH) 595x595x70mm complete all as specified and as directed. Make : Havells Model-PLUTONEO2x2PLR34WLED840S/ PLUTONEO2x2PLR34WLED857S or equivalent model in make of Philips/ Crompton/Bajaj |
| 91 | Supply, fix, Installing and Testing Vertical Storage water heater, withfive star rating,rust & shock proof ABS outer body, electric driven of capacity 25 liters, including all accessories complete all as specified and as directed.Make : Havells Model No GHWAMGTWH025 Monza DX or equivalent in Racold/Orient. |
| 92 | S & F Utility DB encloser with plug socket and MCB 20 A , complete all as specified and as directed.Make- Havells/L&T/Legrand |
| 93 | S & F in repairs, single pole & neutral DBs 12 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed.Make :- Legrand Cat No 5076 12 or equivalent model in Siemens / Schneider |
| 94 | S&F MCBs, DP 40 to 63 Amps, 10 KA,\"C\" curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.Make :- Legrand Model 4086 37 to 39 or equivalent model in Siemens / Schneider/L&T |
| 95 | S&F MCBs, SP 6 to 32 Amps, 10 KA, \"C\" curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.Make :-Legrand Model 4085 90 to 95 orequivalent model in Siemens / Schneider/L&T |
| 96 | M&L for Sub main wiring with 2 runs of 6 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. (Note: 3 run of 6 Sqmm cable along with conduit all together shall be measured as one unit.) |
| 97 | M&L for Sub main wiring with 2 runs of 4 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note: 3 run of 4 Sqmm cable along with conduit all together shall be measured as one unit.) |
| 98 | M&L for Sub main wiring with 2 runs of 2.50 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 2.50 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. (Note: 3 run of 2.5 Sqmm cable along with conduit all together shall be measured as one unit.) |
| 99 | S&F 250mm sweep exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding complete all as specified and as directed. |
| 100 | M&L for plate earthing completewith galvanizedmild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than2.25 m deep below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth lead wire 4 mm dia or 8 SWG bolted (with GI nuts, bolts & check nuts) and earth plate electrodeat one end and connected to main switch board/ DBs etc. at the other, earth strip encased(protected) in and including 15 mm boreGIpipe medium gradewith all fittings from top of electrode to main switch board/ DBs etc fixed with and including 25 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-2 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work complete all as specified and shown in electrical plate No 3 of SSR Pt-Iincluding demolition of old earthing complete all as specified and directed. |
