Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #41176593

Tender For Annual Rate Contract For Leakage Removal In Various Sizes Of Pipe Lines And Fabrication Work Under Jurisdiction Of City Sub Div Phalodi Under Distt. Division Phalodi

Issued by Government Departments · phalodi, Rajasthan
Tender Value
15 Lakhs
Estimated cost
Bid Submission
28 Dec 2023
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
phalodi → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Annual Rate Contract For Leakage Removal In Various Sizes Of Pipe Lines And Fabrication Work Under Jurisdiction Of City Sub Div Phalodi Under Distt. Division Phalodi

BOQ

Name of Work: Annual rate contract for LEAKAGE REMOVAL in various sizes of pipe lines and FABRICATION WORK under jurisdiction of City Sub Div Phalodi under Distt. Division Phalodi
Sl. No. Item Description
1PHED BSR (O&M) 2020: D&S/BSR/2020-21/365-374 Dt. 20.05.2020 1.1 Repairing of leakage in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE pipe lineup to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including taking out the burst pipe from trench, dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material, tightening of CID Joints to make repair leak proof and then refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. for entire job contractor will use his own T&P & labour and will arrange transportation of material required from Jen store. (Required material such as pipe piece, CID Joints shall be provided by Department free of cost)
2In all type Soil AC/PVC/HDPE pipe
350/63/75mm
480/90mm
5100/110mm
6125/140mm
7150/160/180mm
8200/225mm
9250/280mm
10300/315mm
11350mm
12400mm
13450mm
14500mm
15PHED BSR (O&M) 2020: D&S/BSR/2020-21/365-374 Dt. 20.05.2020 1.2Repairing of leakage in existing Distribution/Rising Main/Transmission Main CI/MS/DI pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at at site of work including taking out the burst pipe from trench, dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material, tightening of CID Joints to make repair leak proof and thenrefilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. for entire job contractor will use his own T&P & labour and will arrange transportation of material required from Jen store. (Required material such as pipe piece, CID Joints shall be provided by Department free of cost)
16In all type Soil
1780mm
18100mm
19125mm
20150mm
21200mm
22250mm
23300mm
24350mm
25400mm
26450 mm
27500 mm
28600mm
29PHED BSR (O&M) 2020: D&S/BSR/2020-21/365-374 Dt. 20.05.2020 1.3 Minor repair of leakages such as lead caulking, plugging, clamping and ring fixing in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE/CI/MS/DI pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site to make repair leak proof andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as lead wool, white hump, plugs, clamps etc. shall be provided by Department free of cost)
30In all type Soil
3150/63/75mm
3280/90mm
33100/110mm
34125/140mm
35150/160/180mm
36200/225mm
37250/280mm
38300/315mm
39350mm
40400mm
41450 mm
42500 mm
43600 mm
44PHED BSR (O&M) 2020: D&S/BSR/2020-21/365-374 Dt. 20.05.2020 1.4 Replacement of CI/ DI Double flange sluice valves,non return valves,butter fly valves etc. in existing Distribution/Rising Main/Transmission Main pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including providing and fixing MS Nut and Bolt and rubber gasket, dewatering and providing adequate safety arrangement at site andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as Valve, Tail piece, CID Joints etc. shall be provided by Department free of cost)
45In all type Soil
4680 mm
47100 mm
48125 mm
49150 mm
50200 mm
51250 mm
52300 mm
53350 mm
54400 mm
55450 mm
56500 mm
57600 mm
58PHED BSR (O&M) 2020: D&S/BSR/2020-21/365-374 Dt. 20.05.2020 1.5 Removal of Choking from pipe line, including tree roots, malba, sand and otherby manually or other means, cleaning of line and testing in existing Distribution/Rising Main/Transmission Main AC/PVC/HDPE/uPVC pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as pipe piece CID Joints shall be provided by Department free of cost)as per satisfaction of EIC. Rates for per pit.
59In all type Soil
6075 mm
6190/80 mm
62110/100 mm
63140/125 mm
64180/160/150 mm
65225/200 mm
66250 mm
67300 mm
68PHED BSR (O&M) 2020: D&S/BSR/2020-21/365-374 Dt. 20.05.2020 1.6 Removal of Choking from pipe line, including tree roots, malba, sand and otherby manually or other means, cleaning of line and testing in existing Distribution/Rising Main/Transmission Main CI/MS/DI pipe line up to 1.5 mtr depth of sizes as given below by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as pipe piece CID Joints shall be provided by Department free of cost)as per satisfaction of EIC. Rates for per pit.
69In all type Soil
7080 mm
71100 mm
72125 mm
73150 mm
74225/200 mm
75250 mm
76300 mm
77PHED BSR (O&M) 2020: D&S/BSR/2020-21/365-374 Dt. 20.05.2020 1.7 Disconnection of water connection from existing pipe line in all type of soils up to 1.5 mtr depth by digging out suitable size of pit at site of work, with cutting of service line and refixing of clamp revolving it 180 degreethen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour.
78PHED BSR (O&M) 2020: D&S/BSR/2020-21/365-374 Dt. 20.05.2020 1.8 Removal of sluice valve in existing pipe line up to 1.5 mtr depth by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material to make repair leak proof andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of required material from store. (Required material such as pipe piece CID Joints shall be provided by Department free of cost)
79In all type Soil
8080 mm dia pipe to 100mm
81125 mm dia pipe to 150mm
82200 mm dia pipe to 250mm
83300 mm dia pipe to 350mm
84400 mm dia pipe
85450 mm dia pipe
86500 mm dia pipe
87600 mm dia pipe
88PHED BSR (O&M) 2020: D&S/BSR/2020-21/365-374 Dt. 20.05.2020 1.9 Work of Inter Connection in AC/PVC/HDPE pipe line up to 1.5 mtr depth by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site, cutting of existing pipeline, jointing of Tee (complete) and other specials to make inter connection repair leak proof andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. for entire job contractor will use his own T&P & labour and will arrange transportation of material required from store. (Material such as Tee/ Tee Clamp/rubber sheet/ CID joints required for inter connection shall be provided by the department free of cost).
89In all type Soil
9080 mm to 110 mm
91125 mm to 165 mm
92200 mm to 300 mm
93PHED BSR (O&M) 2020: D&S/BSR/2020-21/365-374 Dt. 20.05.2020 1.10 Work of Inter Connection in CI/DI/MS pipe line up to 1.5 mtr depth by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site, cutting of existing pipeline, jointing of Tee (complete) and other specials to make inter connection repair leak proof andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of material required from store. (Material such as Tee/ Tee Clamp/rubber sheet/ CID joints required for inter connection shall be provided by the department free of cost).
94In all type Soil
9580 mm to 100 mm
96125 mm to 150 mm
97200 mm to 300 mm
98350 mm to 450 mm
99500 mm to 600 mm
100PHED BSR (O&M) 2020: D&S/BSR/2020-21/365-374 Dt. 20.05.2020 1.11 Labour charges for removal of complaint of polluted water supply to the consumers
101Survey of the locality of polluted water supply for preliminary assessment of source of pollution during supply hours
102PHED BSR (O&M) 2020: D&S/BSR/2020-21/365-374 Dt. 20.05.2020 1.12 Labour charges for digging of pit of suitable size for removal of water pollutiononexisting distribution AC/PVC/uPVC/HDPE pipe linesup to 1.5 mtr depth including cutting of pipe and assessment of direction of flow of polluted water during non supply hours, identifying the source of pollution and repairing of fault in pipe line byfixing of pipe piece with jointing material (pipe and jointing material shall be supplied by department) to make it leak proof andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. The rate includes all labour charges to complete the work for pipe size
103In all type Soil
10450 to 75 mm
10580-110 mm
106125 to 165 mm
107200 to 300 mm
108350 to 400 mm
109PHED BSR (O&M) 2020: D&S/BSR/2020-21/365-374 Dt. 20.05.2020 1.13 Labour charges for digging of pit of suitable size for removal of water pollution onexisting distribution CI/DI/MS pipe linesup to 1.5 mtr depth including cutting of pipe and assessment of direction of flow of polluted water during non supply hours, identifying the source of pollution and repairing of fault pipe line byfixing of pipe piece with jointing material (pipe and jointing material shall be supplied by department) to make it leak proof andthen refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. The rate includes all labour charges to complete the work for pipe size
110In all type Soil
11180-100 mm
112125 to 150 mm
113200 to 300 mm
114350 to 450 mm
115PHED BSR (O&M) 2020: D&S/BSR/2020-21/365-374 Dt. 20.05.2020 1.14 Restoration of bitumen road by patch work of WBM using crushed / broken aggregate as per the standard specification and consolidation with hand rammer spreading and consolidation of binding material , cleaning of surface of WBM and providing of seal &tack coat as per site condition by using ready cold mixup to the satisfaction of engineer in charge.The rate includes the makingof pit in regular shape, all labour, material and T&P charge complete job.
116PHED BSR (O&M) 2020: D&S/BSR/2020-21/365-374 Dt. 20.05.2020 1.15 Restoration of cement concreteroad including making of pit in regular shape, ramming and consolidation of surface, laying, positioning and compactingcement concrete ( M-20 ) minimum thickness 200 mm upto the satisfaction ofengineer incharge.The rate includes the makingof pit in regular shape, all labour, material and T&P charge complete job.
117PHED BSR (O&M) 2020: D&S/BSR/2020-21/365-374 Dt. 20.05.2020 5.1Turning of various sizes of CID Joints Class- 10/ 15 Complete set (Labour Charges), The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concern\"s store own his cost.
11880 mm dia
119100 mm dia
120125 mm dia
121150 mm dia
122200 mm dia
123250 mm dia
124300 mm dia
125350 mm dia
126400 mm dia
127RUDIP-2022 / A - MACHINARY/00010001 - Hydraulic Excavator of 1 cum bucketNote-1: Hire charges include cost of services of operating staff, Cost of lubricating oil, diesel / Petrol/ Kerosene oil, other consumables for running the plant and machinery and excluding GST.Note-2: The hire charges of plant & machinery on per day basis are for single shift of eight working hours.
128RUDIP-2022 / A - MACHINARY/00470047 -Crane 5 tonne capacityNote-1: Hire charges include cost of services of operating staff, Cost of lubricating oil, diesel / Petrol/ Kerosene oil, other consumables for running the plant and machinery and excluding GST.Note-2: The hire charges of plant & machinery on per day basis are for single shift of eight working hours.
129FABRICATION WORKS
1305.1 - Turning of various sizes of CID Joints Class- 10/ 15 Complete set (Labour Charges), The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concern\"s store own his cost.
1315.1.1 - 80 mm dia
1325.1.2 - 100 mm dia
1335.1.3 - 125 mm dia
1345.1.4 - 150 mm dia
1355.1.5 - 200 mm dia
1365.1.6 - 250 mm dia
1375.1.7 - 300 mm dia
1385.1.8 - 350 mm dia
1395.1.9 - 400 mm dia
1405.2 - Threading on GI Pipes different diameter as below (Rate Per Mouth Threading). The Pipes will be supplied by the Department and carting to workshop and after threading of these pipes, firm is liable to transport upto Junior Engineer concern\"s store own his cost.
1415.2.1 - 32 mm
1425.2.2 - 50 mm
1435.2.3 - 65 mm
1445.2.4 - 80 mm
1455.2.5 - 100 mm
1465.2.6 - 125mm
1475.2.7 - 150mm
1485.3 - Cutting of GI/MS/CI Pipes of any class as below (Rate per Mouth- One cutting only making two pieces). The Pipes will be supplied by the Department.
1495.3.1 - 32 mm
1505.3.2 - 40 mm
1515.3.3 - 50 mm
1525.3.4 - 65 mm
1535.3.5 - 80 mm
1545.3.6 - 100 mm
1555.3.7 - 125mm
1565.3.8 - 150mm
1575.3.9 - 200mm
1585.3.10 - 250mm
1595.4 - Welding on M.S. / G.I./CI Pipes and other material by Electric Welding, this includes all the material like welding rods/ equipment like welding machine/ generater, if required for job.
1605.4.1 - At Workshop
1615.4.2 - On Site
1625.5 - Providing, Fabrication of Mild SteelPlane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect.
1635.6 - Making Hole (only labour charges) by drill machine in MS/ CI/ DI Pipes and Specials. per hole rate
1645.6.1 - Up to 12 mm)dia. Hole
1655.6.2 - Above 12 mmdia. Hole.
1665.7 - Making of GI Assembly pipe for various sizes including threading, tightening, welding of flange and welding with MS Patti, holes and cable grove making as per required length of 3.00 M/ 6.00 M (Pipse and flangse shall be providedand carting these to workshop by the the department). Length of MS strip will be 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flange. Holes in the flanged will be standard size and above 12 mm dia. in size. After tightening the pipe and flanged, welding will be done at junction of flange and pipe complete in all respect. After preparing of Assembly Pipes, the firm is liable to transport these toconcern\"s divisional store own his cost.
1675.7.1 - 50 mm
1685.7.2 - 65 mm
1695.7.3 - 80 mm
1705.7.4 - 100 mm
1715.8 - Supplying and fixing of MS Rods for different sizes of sluice valveand should be supplied as according to size of old rods including material and finishing for the following sizes.
1725.8.1 - Sluice Valve Size 80mm
1735.8.2 - Sluice Valve Size 100mm
1745.8.3 - Sluice Valve Size 125mm
1755.8.4 - Sluice Valve Size 150mm
1765.8.5 - Sluice Valve Size 200mm
1775.8.6 - Sluice Valve Size 250mm
1785.8.7 - Sluice Valve Size 300mm
1795.8.8 - Sluice Valve Size 350mm
1805.8.9 - Sluice Valve Size 400mm
1815.9 - Supplying of Chuck Nut for different sizes of sluice valveand should be supplied as according to size of Check Nut including material for the following sizes.
1825.9.1 - Sluice Valve Size 80mm
1835.9.2 - Sluice Valve Size 100mm
1845.9.3 - Sluice Valve Size 125mm
1855.9.4 - Sluice Valve Size 150mm
1865.9.5 - Sluice Valve Size 200mm
1875.9.6 - Sluice Valve Size 250mm
1885.9.7 - Sluice Valve Size 300mm
1895.9.8 - Sluice Valve Size 350mm
1905.9.9 - Sluice Valve Size 400mm
1915.1 - Providing of U Plate (U Stand) for different sizes of sluice valve and should be supplied as according to size of old U Plate including material for the following sizes.
1925.10.1 - Sluice Valve Size 80mm
1935.10.2 - Sluice Valve Size 100mm
1945.10.3 - Sluice Valve Size 125mm
1955.10.4 - Sluice Valve Size 150mm
1965.10.5 - Sluice Valve Size 200mm
1975.10.6 - Sluice Valve Size 250mm
1985.10.7 - Sluice Valve Size 300mm
1995.11 - Supplying ofMS Rods and Chuck Nut (Complete Set) for different sizes of sluice valveand should be supplied as according to size of Check Nut including material for the following sizes.
2005.11.1 - Sluice Valve Size 80mm
2015.11.2 - Sluice Valve Size 100mm
2025.11.3 - Sluice Valve Size 125mm
2035.11.4 - Sluice Valve Size 150mm
2045.11.5 - Sluice Valve Size 200mm
2055.11.6 - Sluice Valve Size 250mm
2065.11.7 - Sluice Valve Size 300mm
2075.11.8 - Sluice Valve Size 350mm
2085.11.9 - Sluice Valve Size 400mm
2095.12 - Making Direct Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D)including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flanged will be standard size and above 15 mm in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material. The Length of Direct Pump Piece will be 30 cm (300 mm).
2105.12.1 - 2\" dia. Size (50 mm)
2115.12.2 - 2 ½\" size (65 mm)
2125.12.3 - 3\" dia size (80 mm)
2135.12.4 - 4\" dia size (100 mm)
2145.13 - Making Reducer Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D)including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flange will be standard size and above 15 mm dia. in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material (Both the larger and smaller pipe will have equal length making reducer). The Total Length of Reducer Pump Piece will be 30 cm (300 mm).
2155.13.1 - 2x2 ½ “ dia size (50 x 65 mm)
2165.13.2 - 2 ½ “x 3” dia size (65 x 80 mm)
2175.13.3 - 2”x 3” dia size (50 x 80 mm)
2185.13.4 - 3”x 4” dia size (80 x 100 mm)

AI Tender Summary

OUR REF NO 41176593
AUTHORITY Government Departments
TENDER VALUE 15 Lakhs
LAST DATE 28-12-2023
Authority
Authority Name Public Health And Engineering Department
Work Description Tender For Annual Rate Contract For Leakage Removal In Various Sizes Of Pipe Lines And Fabrication Work Under Jurisdiction Of City Sub Div Phalodi Under Distt. Division Phalodi
Basic Detail
Tender No NIT NO. 49 / 2023-24
Bidding Type Tender
Location
City phalodi
State Rajasthan
Key Dates
Publish Date 18 Dec 2023
Submission Date 28 Dec 2023
Open Date 29 Dec 2023
Finance
Tender Value 15 Lakhs
Tender Fee 500
EMD 30000
Exemption Not Available
Document List
a025bb56-4c93-4a31-98dc-7700e49e24c8.html
49.pdf
BOQ_672186.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Dec 18, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 28, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Dec 29, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

a025bb56-4c93-4a31-98dc-7700e49e24c8.html

pdf

49.pdf

xls

BOQ_672186.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender