Tamil Nadu Maritime Board has published Tender For Creation Of Berthing Facilities (Floating Jetty) At Cuddalore, Tamil Nadu. Submission Date for this Tender is 23-01-2024. Jetty Tenders in cuddalore Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Design, Construction, supply, installation, testify, and commissioning of concrete Floating Jetties (Pontoon) in position 20m Length and 6m width floating pontoon (size of single pontoon) meeting General specification of net deck capacity of 5 KN/m2/of monolithic construction certification standards as specified inclusive of all treatments and utility ducts with access manholes. The pontoon shall be fixed with required mooring chains inclusive of anchoring in soil/bedrock. The cost shall inclusive of pontoons and their accessories such as mooring chains, anchor chains, Twin post (SS) suitable bollards for vessel mooring, aluminum Gangway (Warren Trust type of Marine grade Aluminum) and utility pedestal. The design of (for pontoon and related items) to be approved by IIT - NTCPWC / TNMB for Providing floating terminal facility in approved location suitable for walk way passenger complete in every respect in accordance with technical specification and special condition of contract (including all tools and taxes but excluding GST) as prevailing all other charges, expenditure etc., complete. The cost shall inclusive of pontoons and their accessories such as a. Aluminum Gangway (Warren Truss type) of marine grade aluminum, corrosion resistant of size 10.00 x 2.75 m. (Subject to design approval) FRP antiskid grating of approved design to be provided on the walking area of the gangway. Suitable pivot arrangement in stainless steel to be provided for attaching gangway to the RCC bank seat at the jetty approach. Hot dipped galvanized safety chain with eye to be provided. The part of the gangway that rests on the pontoon to have high density nylon rollers and these rollers will rest on stainless steel sliding / transition plate including hinges. b. TWIN POSTS BOLLARDS of SS 316 having 5T SWL capacity fixed to SS cast-in-sockets, SOS PEDESTAL of FRP or marine grade aluminum with top light, electrical connection, life buoy, 10m lifeline, fire extinguisher and first aid box. All cabling up to a shore supply pointadjacent to the head of the gangway. D TYPE Extruder Fender as per drawing connected by SS bolts at required spacing to SS cast-in-sockets on the concrete pontoon. MOORING SYSTEM using steel chain of Grade 30 or above with concrete sinkers / steel anchors for the anchoring of the floating jetty. Arrangement to including additional SS bollards / Deck mooring eyes, chain stoppers and other assemblies as required. c. NOTE: AMC of the above floating jetties, for a period of Ten years after the completion of One year defects liability period. Complete in all respect. (Consumables will be paid by COP) AMC includes regular inspection of pontoon and accessories and its soundness, stability and wear tear of fixture, chain and mooring system and gangways and other electrical fixtures. Proper records to be maintained for inspection of total structure and the rectification carried out time to time. In case of damage to structure due to manufacturing defect and not by external impact same shall be rectified by contractor at no extra cost to Port. d. The AMC Charges are fixed at 0.40 percent of the quoted Cost for the first year. For subsequent years up to ten years of AMC period, and annual increase of 8.00 percent (over the AMC Cost of previous year) - to take care of inflation, shall be applied. The payment shall be made annually once after certification from user Agency for satisfactory maintenance. |
| 2 | Providing and fixing lighting system with solar panels, as approved by IIT, NTCPWC / TNMB etc., complete.Rate Rs.50,000/- as approved by IITM- NTCPWC in Detailed Project Report. |
| 3 | To carry out dredging work in all types of soil (Except Rock) as existing at site including loose of compacted sand, silt mixed with / without clay or soft clay or any other soft materials including boulders spilled cargoes and any broken concrete pieces / debris and foreign materials like fishing nets, broken pieces of mechanized fishing boats etc., by suitable methods acceptable to the Departmental Engineers using required type of Grab Dredger or cuter suction Dredger or any suitable Machinery according to the site condition. The scope of work included mobilization and demobilization of all required capacity requirements for proposed dredging work. The shifting of dredged to the designated dumping ground including necessary pre survey and final survey etc. complete. The dredging includes all types of soil, sand clay, etc. The contractor has to assess their assessment, soil investigations, etc., However, payment shall be made only after achieving the designed depth. The assessment of quantity is fully responsive to the Contractor. |
| 4 | Formation of embankment by excavating the available approved Gravel deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water, all specifications. etc., complete. |
| 5 | Setting up the pilling gantry and connected equipment over each pile location, including cost of shifting, cost of all materials for piling gantry, labour, setting up the rig to alignment and correct dimensions as shown in the drawing and as directed by the department engineer instruction etc complete. |
| 6 | Providing and fabricating M.S.liners of 6mm thickness in for required length with M.S. Shoes of 1.0m height using 6mm and 12mm thick M.S. plates for 1000mm dia for bored vertical pile measured from cut off level of pile to the terminating level including supplying, cutting, rolling, bending, handling and welding cost, labours, materials, accessories, hire and running charges of all machineries, royalty, labour, material, T&P, conveyance charges, Port entry fess etc. all complete as per drawings and specification as directed by Engineer-In-Charge etc., complete |
| 7 | Boring through all types of soils, boulders, hard strata and rocks etc. for 1000mm Dia vertical bored piles from the existing ground level for all the founding level CD of the piles, as shown in drawing including bailing, flushing the bore bentonite with required density, chiselling, shifting of materials etc. complete as per directed by the Engineer-In-charge etc complete. |
| 8 | Chiselling/Breaking using suitable tools and equipment’s the top of pile concrete up to the receipt of dense concrete and dressing the pile head suitably so as to receive the form, work for deck work, including breaking to the required level exposing the pile reinforcement to sufficient length as per approved drawing and TNMB Engineers instruction for embedding into the coping beam etc. including removal of concrete debris from the site, supply of all labour, material, transportation cost, hire and running charges of all machineries complete for all 1000mm dia piles as directed by the Engineer-In-Charge etc complete. |
| 9 | Providing and laying reinforced cement concrete in concrete mix M35 for pile, Muff, Beams, Slabs and all R.C. members but excluding cost of steel reinforcements in position as per approved drawing and as directed by the Engineer-In-charge including mixing, laying, consolidating, curing, including all labours, slings, shackles, supply of all labour, material, transportation cost, hire and running charges of all machineries such as cranes, lorries etc., complete as directed by the Engineer-In-Charge. |
| 10 | Fabricating and placing in position of steel reinforcement TMT bars (Fe 500D) as per IS 1786 for all reinforced cement concrete pile, and all RCC members including lifting hook, cutting, bending, tying with 16 gauge G.I binding wire and welding to proper specifications wherever required including cost of steel and binding wire, cover blocks of 100mm dia in CC M40 mix, supply of with supply of all materials, labour, transportation, T&P, all taxes, tollage, safety measures, port entry fees, etc. all complete as directed by the Engineer In-Charge. |
| 11 | Supplying and erecting Steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specification. (Payment for centering shall be given after the concrete is laid) |
| 12 | Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift up to 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work- In all kinds of soils Depth up to 3 m. |
| 13 | Supplying and filling sand including cost of materials, labour charges, loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification. |
| 14 | Cement Concrete 1:3:6 (One Cement, three crushed stone sand and six broken stone jelly) using 40mm size hard broken stone jelly for dummy columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete. |
| 15 | Brick work using second class ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" in Cement Mortar 1:3 (One cement and three crushed stone sand) including curing neat finishing, etc., complete complying with standard specification. |
| 16 | Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand), 12mm thick with Admixture in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 17 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 18 | Supplying and painting the Two coat of ready mixed ACE emulsion (Interior & Exterior) paint of 1st quality and weather proof over one coat of primer including thorough scrapping, clean removal of dirt, and including necessary plaster of Paris putty, wherever required etc., complete complying with standard specifications. |
| 19 | Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 20 | Fixing the wall with ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 21 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications.(The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) |
| 22 | Supplying and fixing if marble of 0.61*1.22m.,18/20mm thick in all floors for urinal partition including for labour charges for fixing and polishing etc., with cement concrete 1:2:4 (1 cement: 2 Coarse sand: 4 graded stone aggregate) as per direction of engineer in charge complete. |
| 23 | UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with Gl/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all-round the frames. The window should be got approved from the Executive Engineer before use on work |
| 24 | UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all-round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 25 | Supplying and fixing mild steel grills for windows, ventilators, etc., including priming coat |
| 26 | Painting new wood works such as doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 27 | Providing Teak Wood door frame including cost of labour, materials, fixing charges. etc., complete |
| 28 | Supplying and fixing Solid core Particle board flush shutter of nominal thick of 35 mm with Teak ply on both sides and with T.W. lipping around conforming to IS 2302 including supplying and fixing cost of wind appliances and furniture fittings such as 1no .300 x 12 mm aluminium tower bolt 2 nos. 200x12mm aluminium tower bolts 1no. 250 x 16 mm aluminium a drop, 2 nos. 200mm "D" type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers. |
| 29 | FRP door Sutter with FRP door frames made out of FRP Sheets of 3mm thick of overall size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and solid core FRP shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers. |
| 30 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 31 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, raw plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 32 | Supply and fixing in position first quality and approved variety of 32mmGun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be gor approved by the Executive Engineer before use on work. |
| 33 | Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 34 | Supply and fixing in position Health Faucet of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers |
| 35 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works) |
| 36 | Supply and fixing in position of best Indian make white / colour glazed earthenware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masonry and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers.(The urinal should be got approved by the Executive Engineer before use on works.) |
| 37 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthenware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 38 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level - 160mm |
| 39 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessary PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. - 110mm |
| 40 | Supplying, laying and jointing CPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications.The CPVC pipes shall be got approved by Executive Engineer before use on works. - 32mm Nominal dia pipes -15 mm Dia Pipe |
| 41 | 20 mm Dia Pipe |
| 42 | 32 mm Dia Pipe |
| 43 | Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. |
| 44 | Providing and laying in position sand/ stone grit filled nylon bags for coffer dam to working platform to the required formation and grade as shown in drawing etc. complete, including the cost of all materials, labour, HOM of machinery with all lead and lift etc., complete as per the specifications and as directed by the Engineer-in-charge of work. |
| 45 | Providing and laying crushed stone sand gravel mix (1:1) at the rate of 0.62 cu.m of filling crushed stone sand and 0.66cu .m of gravel to consolidated 1hide of 150mm designed to attain a CBR value of not less than 20 including cost and conveyance of crushed stone sandgravel from approved sources to work site and stacking them to the departmental gauge for premeasurement including labour charges labour charges for power roller watering and all other tools and plants employed including all other incidental charges etc., complete (For road works) |
| 46 | Cement Concrete 1:4:8 (One Cement, four crushed stone sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification |
| 47 | Providing and laying in position, Standardised PCC Concrete Mix M-35 Grade in accordance with IS:456-2000 using 20mm and downgraded hard broken granite stone jelly with minimum cement content of 440 kg/m3 and maximum water cement ratio of 0.40, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m") 7670 kg. of crushed stone sand, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 48 | Supplying and fixing in position CI manhole covers with CI frames (heavy Duty) pf size 60cm x 60cm of best approved quality as per standard specification etc., complete complying with standard specifications |
| 49 | Supplying and fixing in position PVC Water Tank of approved quality and good variety complete and complying with standard specification - 1000 litre capacity |
| 50 | Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., complete. |
| 51 | Supplying CPVC Specials (with working pressure 10kg/ sq.cm.) in water supply arrangements (both in internal and external water supply arrangements) - 15 mm Dia Elbow |
| 52 | 20 mm Dia Elbow |
| 53 | 32 mm Dia Elbow |
| 54 | 15 mm Dia Tee |
| 55 | 20mm Dia Tee |
| 56 | 32mm Dia Tee |
| 57 | 15 mm Dia Coupling |
| 58 | 20 mm Dia Coupling |
| 59 | 32 mm Dia Coupling |
| 60 | 15 mm Dia Union |
| 61 | 20 mm Dia Union |
| 62 | 32 mm Dia Union |
| 63 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). - PVC Elbow - 110 mm dia |
| 64 | 160 mm dia |
| 65 | PVC Tee - 110 mm dia |
| 66 | 160 mm dia |
| 67 | PVC Bend - 110 mm dia |
| 68 | 160 mm dia |
| 69 | PVC Y- 110 mm dia |
| 70 | 160 mm dia |
| 71 | Supplying and fixing in position PVC cowls of 110mm dia of best approved quality conforming to BIS, etc., complete complying with standard specifications.(The PVC cowl should be got approved by the Executive Engineer before use on works). |
| 72 | Conducting Geo -Soil investigation up to -30m (2 bore hole) in approved location and provide soil strata report, SBC, N-Value etc., complete including cost of Labour, transportation of machineries, Site visit, etc., complete |
| 73 | Providing pressed tiles for 23cm x 23 cm pointing with CM 1:3 etc., complete |
| 74 | Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in with module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour for PVC light point / fan point (for electronic regulator) SD-289 |
| 75 | Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in with module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour for PVC light point / fan point (for electronic regulator) SD-320 |
| 76 | Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 volts grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with suitable module front plastic surface mounting switch box on wall with 1 no. 6A one way module switch and 1 no.6A 3/2 pin module socket with module front plate with painting of suitable colour with continuous earth wire connection by 2.5 sq.mm PVC insulated SC unsheathed copper wire for Open PVC conduit plug point (8 points / coil) SD - 372 |
| 77 | Supply and run of 2 of 2.5 sq.mm (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 2.5 sq.mm PVC insulated SC unsheathed copper wire with painting of suitable colour SD-427 |
| 78 | Supply and fixing of 3 nos .6A two module 5 pin socket, 3 nos. 6A one module switch on suitable module surface mounting box plastic with module cover plate on wall with connection SD-472 |
| 79 | Supply and run of 1 no of 8 SWG GI wire for earth connection SD 457 |
| 80 | Supply and fixing of 8-way single pole and neutral MCB sheet steel enclosure distribution board with double door metal with 1 no 32A DP MCB switch as incoming and 6 nos.6A to 32 A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only |
| 81 | Supply and fixing gof TNEB meter board suitable for 32 A three phase service connection with 3 nos, 32 A fuse unit, 500V, 32A neutral link and earth link (1" x 1/8" copper flat) on TW plant of size 600mm x 450 mm x 19mm with supporting TW reepers of 1" thick on either side with painting with suitable bolt and nuts for fixing the plant on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit |
| 82 | Supply and fixing of 300mm (12") sweep AC exhaust fan complete with necessary wall opening and making good of the all |
| 83 | Supply and fixing of 1200mm (48”) sweep AC ceiling fan complete with stepped electronic 300W regulator with a 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") |
| 84 | Supply and fixing of single box type 4` 36W fluorescent fitting complete with electronic ballast with TW round block on wall or ceiling with flu tube with PVC unsheather copper leades from termination to the fitting |
| 85 | Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL |
| 86 | Supply and fixing of 18W LED square type recessed fitting with LED on false/RCC ceiling with suitable hanging support from ceiling with PVC unsheathed copped leads from terminal to the fitting |
| 87 | Supply and fixing 25W LED street light fitting with LED with 19mm dia GI pipe class B with 1no 19mm GI bend complete on the existing post /on wall with PVC unsheathe copper leads with MS clamps and with painting |
| 88 | Supply, fixing, commissioning and testing of 5 KVA, 1phase generator with operating of diesel etc as complete |
| 89 | Supply and fixing of single-phase UPS - 1 KVA (single phase IN / single phaseout) with battery capacity back up of minimum 1 hour - interconnection, earth link etc as complete |
| 90 | Supply and fixing of 1 no two module DATA I/O switch, with module cover plate on suitable module concealed box (G(I) in flush with wall with connection and termination necessary interconnection jack and other standard accessories in etc. approval to be obtained from Data &Voice Vendor. DATA I/O and voice I/O |
| 91 | Supply and laying of CAT-6 PVC insulated SC unsheathed Conductor in suitable with the existing aluminium raceway concealed in wall/ floor for all data and voice connection and termination including all accessories etc as complete |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
