|
| 1 | Construction/installation of CPP unit consists of&Raw Water Iron concentration upto 8ppm) Providing and installation of 100mmx50mm dia. tubewell with water jet system with supply and installation of all PVC pipe, sand & strainers of approved make (medium duty) conforming to ASTMD-1785 with all necessary accessories, specials with adapter conforming to IS:12818 of adequate length, with supply of all pipes,strainers and other materials (steel cutter piece, plug,reducer,housing clamp of M.S.Plate etc.) for Solar operated submersibile pump, including all labour & fixing cost.( Total depth of tubewell upto desired water level depending on the location,strainer 6m)with carriage including loading – unloading & all necessary works required. (Total depth of borewell is consideredupto max 110 mtrs. only) |
| 2 | Supplying, installation and lowering in position Solar Panel based AC (3 phase) Submersible pumping machinery(preferably with stainless steel fabricated componets) with solar cable & cable connector Kit, PV Panel, Controller, Overhead protection, Dry run protection, Auto Restart facility, Float Switch with Water Level sensors, Solenoid Valve, software for start-up of motors, making necessary connections with treatment units with supplying G.I.Controller box and external electrical (on GRID) connections with necessary wiring, switch board and supplying 32mm dia. PVC column pipe 40 - 60m length, with carriage including loading – unloading & all necessary works required. |
| 3 | Solar Panel configuration: 4 panels of 335 Wp each (Solar Panel to be installed on top of M.S.Supporting structure); with carriage including loading – unloading & all necessary works required, as per drawing. |
| 4 | Solar Submersible pump capacity 1.0HP, Shrijee Pump with flow control facility or equalent brand with same specification.The submersible pump to be used must be configured to run through both energy sources (Solar and AC power ). |
| 5 | Flow Meter for in/out flow control with carriage including loading – unloading & all necessary works required |
| 6 | Supplying and erecting in position full Auto Back wash system ( Flooty, Panel board etc) with carriage including loading – unloading & all necessary works required. |
| 7 | Supplying and erecting in position M.S.structure with primer & approved coulor top Coat Supporting for 1000 Ltr. Food Grade Stainless Steel (SS) product Tank with conical shape for less bacteria generation in the product water, andSolar panels fixing aggengment with wind protection & lower side valve cleaning purpose with carriage including loading – unloading & all necessary works required. |
| 8 | 3mm M.S.chequerred plate at top platform (2.5mX2m), M.S. Ladder (suitably placed)supporting SS Product water Tank with carriage including loading – unloading & all necessary works required. |
| 9 | Construction of 2500 X2000 X1075 platform around Iron & heavy metals treatment Units and MS supporting structure including MS Fencing and Gate covering all side with Printed acrylic sheet as per approved matter with locking arrangement,including carriag, loading – unloading & all necessary works required. |
| 10 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. (SAIL/TATA/RINL) with carriage including loading – unloading & all necessary works required. |
| 11 | Supply & installation of Tata Make FRP vessels (NSF-61 Certified) size - 14x65 - 2 No\"swith additional UV Coating for further weathring with filtration velocity of 17.86 m/hr with carriage including loading – unloading & all necessary works required. |
| 12 | Auto Multy port Valve - 03 Nos (including 1 No. emergency spare reserve) with carriage including loading – unloading & all necessary works required |
| 13 | Supply installation, commissioning of Water Treatment unit for filtration of Iron & other hard particals i.e. Mg, H2S, Ra,Less Turbidity &Heavy Metals etc., below permissible limit as per IS:10500-2016using imported media:a) Natural zeolite(KataloxLight) based Media for Iron filtration - 28x3 ltr (CSIR &NSF Cerified) up to 8 ppm, with carriage including loading – unloading & all necessary works required |
| 14 | b) Green Sand forpre filtaration & requirds Gravels for all Vessel with Oxidation systemwith carriage including loading – unloading & all necessary works required. |
| 15 | Supply and installation of Solar UV Lamp for 1000 LPH capacity WFS with GSM Based IoT Monitoring System for plant running facility with Output/Input real time alert dashboard, Integrated softwarewith login ID password facility & Solar system based configuration, carriage including loading – unloading & all necessary works required. Compact device with universal connect facility which can be configured with any IRPs very easily. |
| 16 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be madefor accesories, specials.For Exposed Work(i) 25mm dia CPVC Pipes Class-1, SDR-11 |
| 17 | Supplying, fitting and fixing Scheme Signboard with Acrylic Sheet Printing as per approved matter. |
| 18 | Annual Maintenance charges for 2nd year (Cleaning & checking of Auto MPV, Panel board, Pressure guage, NRV & Pipe fittings on SOS basis) Price Including Taxes |
