Uttar Pradesh Jal Nigam-UPJN has published Surveying, Soil Investigation, Design And Supply Of All Materials, Labour, T&P Etc. Complete Required For Completion Of Following Works Of “Nagar Palika Parishad Soron Water Supply Scheme”:I) Construction Of Over Head Tank,Pump House, Boundary Wall, Staff. Submission Date for this Tender is 27-12-2023. Tube Well Tenders in kasganj Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 22-Dec-2023 | REVISED DATE AND TIME OF SUBMISSION OF BID | Date | 27-12-2023 |
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | PUMP HOUSE |
| 3 | Provide all materials, labour, T&P etc. complete and construct Pump house size (3.6x3.0x3.0)m Chlorinating room size (1.8x1.2x3.0)m as per departmental type design and drawing (drawingno-D-2)andasperthe specificationsforcivilwork given in the bid document, including supply of all material, labour and T&P etc complete as per instructions of Engineer -in - charge. |
| 4 | Rising Main |
| 5 | Supply of ISI mark DI K-7/K-9 S&S pipes & specials (push on joints) of following class and diameters inclusive of jointing material (Rubber gasket of EPDM Quality) including supply & fiing of specials with all statutory duties and taxes, third party inspection charges, transit insurance, freight, transportation to store / site of work, unloading. stacking etc. complete as directed by Engineer-in-charge. |
| 6 | 100mm dia D.I Class- k9 |
| 7 | 200mm dia D.I Class- k9 |
| 8 | Excavation Work |
| 9 | Excavation of earth in ordinary soil (loam, clay or sand) for pipe line and rising main trenches including lift upto 1.50 m and lead upto 50 m and refilling watering, ramming of the excavated earth into the trench and also disposal of surplus earth upto 50m from the center of the trenches including supply of all material labour, T&P etc complete as per instructions of Engineer -in -charge. |
| 10 | Ordinary soil |
| 11 | Valve Chamber |
| 12 | Provide all materials, labour, T&P etc. complete and constructed Bye-pass chamber for pump house ( 1000 (L) x 1000 (W) x 1150 (H) mm ) drawing (drawing no.D-3) and as per the specifications for civil work given in the bid document, including supply of all material, labour and T&P etc complete as per instructions of Engineer -in -charge. |
| 13 | Supply of following size of D.I.. D/F sluice valves as per I.S. 780-1960 tested to 10 Kg/Sq.m fixing in pipe line trenches, jointing and testing complete. |
| 14 | 200 mm dia |
| 15 | 100 mm dia |
| 16 | Supply of all materials, labour T&P and construct masonary type sluice valve chamber. |
| 17 | Carting, laying and jointing of the following sizes of pipes into the trenches including cost of all jointing materials, labour and T&P testing etc. complete. |
| 18 | 100 MM dia D.I CLASS- K9 |
| 19 | 200 MM dia D.I CLASS- K9 |
| 20 | Thrust Block |
| 21 | Design and construct Thrust Block made in R.C.C. with cement, coarse sand & 20 mm gauge stone ballast in proportion of 1:1.5:3,forpipeline,includingsupplyofMS reinforcement wrought to required shape as necessary ,its bending, fixing & binding the same with 0.50 mm thick binding wire in position & necessary centering & shuttering including curing and supply of all materials, labour, T & P etc. required for proper completion of the work and as per specifications for RCC work as per instructions of Engineer -in -charge. |
| 22 | Design and construct Thrust Block made in Reinforced Cement concrete (1:1.5:3), with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, as per technical requirements. |
| 23 | Providing reinforcement of Thrust block for reinforced concrete work including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with wire at every inter-section, complete as per drawing and direction. |
| 24 | Dismantling and reinstatement of following type of road surfaces for laying of pipe line including sorting out of serviceable material and disposal of unserviceable materials. |
| 25 | Dismantling of Interlocking Road |
| 26 | Reinstatment of Interlocking Road (with 40% new tiles and 60% used old tiles) |
| 27 | Dismantling of C.C. Road |
| 28 | Reinstatment of C.C. Road |
| 29 | Dismantling Bituminous surface |
| 30 | Reinstatement Bituminous surface |
| 31 | R.C.C Overhead Tank |
| 32 | Supply of all materials labour T&P etc. for complete construction of R.C.C. Over Head Tank of followingcapacityand staging min 0.6m above ground level with main components, soil testing and assuming bearingcapacity of soil as 8 MT, including cost of supply of design and drawings. All the water retaining components of OHT shall be casted in M-30 grade cement concrete and minimum grade of concrete of foundation and staging should be M-25 with approved cement, coarse sand and stone grit as per I.S. 11682 and I.S.456 Seismic effects and wind load should be taken into consideration as per I.S. 1893 for earthquake resistance and I.S. 875 part-III for wind load on structure and including 1M wide RCC doglegged staircase with separate coloumns, 1 m wide R.C.C. M30 balcony, M.S. ladder made of 50x50x6 mm angle section and 20mm plain M.S. bars with hand rails of 20mm medium class G.I. pipes, One aluminum ladder inside the tank from top dome to bottom dome, R.C.C. railing with 20mm dia medium class G.I.pipe (in 3 rows) on both sides of stair case, supported on 50x50x6mm M.S. angle section, spaced at intervals not more than 1.5m, Proper ventilator at top dome in circular shape of 1.2 m dia,Ultra Sonic Water level indicator fabricated with sensor connecting to automation, Lightening conductor as per I.S.S.2309 or its latest amendments of latest electricity rules, consisting of proper elevation rod with 5 or more fork points as prescribed in ISS 2309-1969 and ISS 3013-1966, C.I. manhole of min 60x60cm size with locking arrangement, Supply, fixing, jointing of D.I.D/F Pipes of appropriate size with D.I.D/F specials conforming to IS 8329/2000 as vertical pipes for inlet(300mm), outlet(300mm), overflow and washout as per latest / relevant I.S. specifications withall jointing materials for proper completion of work, Construction of bed blocks in 1:2:4 PCC with cement, coarse sand and approved stone grit , Constructionof washout / overflow chamber and chambers for sluice / butter fly valves as per departmental type design and drawing, Supply of 200 mm dia PVC pipe as per I.S.- 4985/2000 for disposal of water from overflow and washout chamber to suitable point outside the water works compound, Painting of all concrete surface and steel pipe works with three coats. |
| 33 | 1350 Kl /18M Staging |
| 34 | 800 Kl /16M Staging |
| 35 | 200 Kl /16M Staging |
| 36 | Provision for separate vertical coloumn pipe including supply and fixing of withD.I. D/F bend required size of pipe (250mm) with 1.00 m length beyond the apron, sluice, valve, duck foot bend, M.S. clamps etc. all complete. |
| 37 | Testing Bearing Capicity of soil. |
| 38 | Distribution System |
| 39 | Supply of High Density Polyethylene Pipes & electro-fusion specials (HDPE (PN-6)/PE-100), confirming to IS 4984 / 14151 / 12786 / 13488 (and other related I.S. codes) in coils / standard lengths with necessary jointing material like electro-fusioncoupler for Joints/Junctions , flanged joint, including all statutory duties and taxes, third party inspection charges, transit insurance, freight, transportation to store / site of work, unloading & stacking the same in covered shade duly protecting from sunrays & rains etc. complete as directed by Engineer-in-charge. |
| 40 | HDPE PIPE PE-100, PN-6 |
| 41 | 90 mm dia |
| 42 | 110 mm dia |
| 43 | 125 mm dia |
| 44 | 140 mm dia |
| 45 | 160 mm dia |
| 46 | D.I. K-7 Pipe |
| 47 | 200 mm dia |
| 48 | 250 mm dia |
| 49 | 300 mm dia |
| 50 | 350 mm dia |
| 51 | 400 mm dia |
| 52 | Carting laying and jointing of the following sizes of pipes into the trenches including cost of all jointing materials, labour and T&P testing etc. complete. |
| 53 | HDPE PIPE PE-100, PN-6 |
| 54 | 90 mm dia |
| 55 | 110 mm dia |
| 56 | 125 mm dia |
| 57 | 140 mm dia |
| 58 | 160 mm dia |
| 59 | D.I. K-7 Pipe |
| 60 | 200 mm dia |
| 61 | 250 mm dia |
| 62 | 300 mm dia |
| 63 | 350 mm dia |
| 64 | 400 mm dia |
| 65 | Supply of under ground sluice value type fire hydrant consisting of 80 mm dia sluice valve, 80mm dia tail pieces, 80mm dia duck foot bend and 80 mm dia standard makes iron coupling with cap and etc. complete conforming to latest/relevent I.S.specifications including all taxes and insurance up to site of work and lowering them into the trenches, fixing in position and jointing them with pipelines and testing etc. complete (including supply of jointing materials and Valve fittings etc. complete as per instructions of Engineer -in - charge. Location: Just outside campus. |
| 66 | Distribution System - Pipeline Excavation |
| 67 | Provision for following types of Culvert crossing along the alignment of pipe line complete as per instructions of Engineer -in -charge. (casing of pipe is done by concreting) |
| 68 | Provision of Nala/Culvert Crossing (internal width -2 m to 3.0m) upto Dia 300 mm |
| 69 | Provision of crossing of small drains for laying of pipe line for (internal width upto 1.0m) . |
| 70 | Road Crossing By Trenchless Method- Excavation in foundation of trench of proper sizein soil mixed with moorum, Shingle, Kankar, soft rock, hard rock, including refilling, dressing and ramming earth or sand or bajri, ballast, including providing, supply, carting, lowering, laying and jointing of casing pipe of M.S. with appropriate size, with rubber ring joint,sand filling in gap inside M.S. pipe, insertion of distribution pipe into the encasing pipe including supply of T&P, including concrete of 150 mm thick in with 40mm gauge brick ballastlocal sand and cement in proportion of 8:4:1, provision for barricading, labour for traffic diversion etc.Complete for proper completion of work as per instruction of Engineer. |
| 71 | Up to 200 mm dia. Pipe |
| 72 | Up to 350 mm dia. Pipe |
| 73 | Distribution System - Connections |
| 74 | Provision for Single Tap making ferrule house connection in 90 to 250 mm dia distribution main with fixing of saddle pieces, connection fittings, GM ferrule of 15mm dia including brass tape with welded, 20mm dia (OD) HDPE pipe (12.5 kg/cm2) and 20 mm dia (OD) G.I. pipe class B upto house holder also including dismentling and rainstatement of all type roads, excavation of trenches, supply of all fittings maerials, labour, T&P etc. all work complete as per direction of engineer incharge. House service connections |
| 75 | Public Stand Post |
| 76 | Sluice valve chamber (masonry Type) - dia upto 200 mm - 1000 (L) x 1200 (W) x 1300 (H) mm |
| 77 | Sluice valve chamber (surface box Type) |
| 78 | Sluice valve chamber (surface box Type) - Fire Hydrantchamber (750 (L) X 450 (W) X 1000 (H) mm) |
| 79 | Air Valve Chamber 350 (L) x 350 (W) x 500 (H) mm |
| 80 | Scour Valve Chamber dia upto 200 mm - 1000 (L) x 1200 (W) x 1300 (H) mm |
| 81 | D.I.. D/F Sluice/Scour valves as per I.S. 780 suitable for a working pressure of 10 Kg/Sqm. |
| 82 | Sluice Valve - 400 mm dia |
| 83 | Sluice Valve - 350 mm dia |
| 84 | Sluice Valve - 300 mm dia |
| 85 | Sluice Valve - 250 mm dia |
| 86 | Sluice Valve - 200 mm dia |
| 87 | Sluice Valve - 150 mm dia |
| 88 | Sluice Valve - 125 mm dia |
| 89 | Sluice Valve - 100 mm dia |
| 90 | Sluice Valve - 80 mm dia |
| 91 | Scour Valve |
| 92 | Scour valve - 80 mm dia |
| 93 | Air valve 20 mm dia |
| 94 | Carting from store to site of work, lowering, fixing and jointing of following fittings in trenches. |
| 95 | D.I. Sluice valve |
| 96 | Sluice Valve - 400 mm dia |
| 97 | Sluice Valve - 350 mm dia |
| 98 | Sluice Valve - 300 mm dia |
| 99 | Sluice Valve - 250 mm dia |
| 100 | Sluice Valve - 200 mm dia |
| 101 | Sluice Valve - 150 mm dia |
| 102 | Sluice Valve - 125 mm dia |
| 103 | Sluice Valve - 100 mm dia |
| 104 | Sluice Valve - 80 mm dia |
| 105 | Scour Valve |
| 106 | Scour valve - 80 mm dia |
| 107 | Fire hydrant 80 mm dia Sluice valve type |
| 108 | Air valve 20 mm dia |
| 109 | Construction of 1.5 m high and 230 mm thick boundary wall with 300 mmx300 mm thick pillar made in Brick masonry in 1 cement and 4coarse sand mortar, the spacing between two pillar should not be more than 3.5m c/c and the depth of foundation should not be less than 0.60m, at the site of water works as per departmental type design and drawing, and, as per specifications given in the bid document including supply of all materials, labour T&P etc.for proper completion of work as per instructions of Engineer -in - charge. (Drawing No.D-1) |
| 110 | Boundary Wall (for Campus Area) |
| 111 | Boundary wall for 1 T.W. Campus |
| 112 | Supply and fixing of 3.6 m x 1.20 m MS gate including fabrication and supply of steel and construction of bounary wall pillars of size 1.35mx0.23mx0.23m with ornamental brick work 115mm th. around RCC, as per departmental type design and drawing (Drawing No. D-1) and as per specifications laid down in the bid document, including supply of all material,labour,T&P etc.required for proper completion of work as per instructions of Engineer-in-charge. |
| 113 | MS Gate |
| 114 | MS Wicket Gate |
| 115 | ConstructionofInterlockingpavementforapproachtowater works, as per departmental type design and drawing and as per specifications laid down in the bid document, including supply of all materials , labour, T&P etc.required for proper completion of work as per instructions of Engineer -in -charge. |
| 116 | Inter Locking Pavement for Approach Road |
| 117 | GSB |
| 118 | Drain for campus |
| 119 | Water recharge Mechanism within the water works campus |
| 120 | Provide all materials labour, T&P etc. and construct single room staff quarter / office room at water works site identified by the Engineer-in-charge as per department type design and drawing and specifications of civil works laid down in the bid document, includingallmaterial labour,T&Petccompleteforproper completion of work as per instructions of Engineer -in -charge. (Drawing No.D-7) Extra depth for Site conditions to be added |
| 121 | STAFF QUARTER |
| 122 | E&M WORK |
| 123 | ZONE-1 |
| 124 | TUBE WELL |
| 125 | Transportation, installation, dismantling of Rig Machine |
| 126 | Drillingof bore |
| 127 | GL to 100 MBGL 600 mm. Dia bore |
| 128 | 100 to 120 MBGL 600 mm. Dia bore |
| 129 | Loging of bore hole by deparmental / Approved electric logger |
| 130 | Zone Testing in water quality problem areaa including all required material. Labour, T&P etc complete in all respect |
| 131 | Tube Well Assembly |
| 132 | MS tubewell assembly with all required parts like plain pipe,rings, well cap, clamp, support structure etc. as required & as per typed design complete in all respect.- 300 mm dia. |
| 133 | MS tubewell assembly with all required parts like plain pipe, slotted pipe (as required up to 50% of plain pipe), rings, bail plug, reducer, central guide, etc. as required & as per typed design complete in all respect.- 200 mm dia. |
| 134 | Lowering of Tube well assembly duly welded including welding electrode and shrouding of pea gravel complete in all respect. |
| 135 | GL to 54 MBGL 300 mm dia. |
| 136 | 54 to 100 MBGL 200 mm dia. |
| 137 | 100 to 110 MBGL 200 mm dia. |
| 138 | Development of Tube Well |
| 139 | Transportation, Installation, Dismentalling of 250 PSICompressor. |
| 140 | Charges for Development |
| 141 | Transportation, erection, Dismentalling of 1 cusec OP Unit and yield test. |
| 142 | Charges for Development |
| 143 | Supply of Lal Kuan Pea-Gravel size 1.6 mm to 4.8 mm. Which is to be used during lowering or tubewell assembly and development of tubewell |
| 144 | SITC of Pumping Plant including, panel, cable, complete in all respect with all required material T&P labour etc. (1200 LPM , 51 m Head , 2900RPM, 25 H.P) |
| 145 | Soft Starter 22 kw |
| 146 | SITC of Main pipingwith 24 mtr. Column pipe, reflux valve,Painting, Tools with wiring of pump house (internal & external) complete in all respect with required material, T&P labour, chain pully and gauges. - 100 mm dia |
| 147 | Additional column pipe in 3 m length |
| 148 | 100 mm dia Motor operated Actuator with sluice valve |
| 149 | 100 mm dia flow meter |
| 150 | Servo voltage stabilizer oil cooled having capacity 40 KVA fully copper winding three phase A.C supply 50 Hz. Input voltage 240-450 output voltage 415 volt +/- 1% withearthling wire and power cable |
| 151 | 03 Months Trial & Run |
| 152 | Automation of Tubewell |
| 153 | CE & UL approved manufacturer’s RTU/ PLC in IP 54 encloser suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specified, onefor each tubewell & OHT to store and transmit data on GSM backbone. RTU/PLC designed with logic to transfer data at multiple stations including Control panel with IP 54 protection industrial grade for all equipments (Separate for control (24 V) and power equipments) with CE/UL approved manufacturer"s SURGE PROTECTOR FOR Control Panel and CE / UL approved manufacturer’s 7" HMItouchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters as specified in tender technical specification sheet . |
| 154 | G.S.M./G.P.R.S. based wireless communication (Sim) with 4G Modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations, all accessories included with signal enhancer anteena made for pumping plant internet charges as specified in tender technical specification sheet. (in case of OHT where no Tube well or CWR modem can not be used, A stand alone type GSM / GPRS based wireless communication (Sim) with 4G modem will be provided) |
| 155 | CE/UL approved manufacturer"s Intelligent smart energy meter with memory real time clock and 1 serial port integrated with R.T.U. as per specification mentioned in technical bid documents. |
| 156 | CE/UL approved manufacturer"s Electro Magnetic Flow Meter / Ultrasonic Flowmeter suitable to measure the water discharge to be fitted at the outlet of OHT 350 mm dia |
| 157 | Auto Phase reversal unit-Auto phase reversal unit/automatic transfer switch with inbuilt time delay & enclosure of suitable Ampere rating (Confirming to I.E.C. - 60947-1 and I.E.C.- 60947-6-1)as specified in tender technical specification sheet |
| 158 | CE/UL approved manufacturer"swater level transmitter/ Hydro static type level transmitter for submersible depth measurement as specified in tender technical specification sheet. |
| 159 | CE/UL approved manufacturer"s Pressure Transmitter as per specifications specified in tender technical specification sheet. |
| 160 | CE/UL surge protector for control panel |
| 161 | CE/UL Certified 7" HMI Touchscreen suitable to commuticate with PLC / RTU for loac display and control of process parameter. |
| 162 | Complete cabling for Tubewell including all control cable of all equipments & instuments at Pump house and OHT |
| 163 | Control Panel with IP54 protection Indsutrial grade for all equipmets seprate for control (24 Volt) and power equipment. |
| 164 | Instaallation, Testing & Commissioning |
| 165 | Trial Run for 3 Month |
| 166 | Automation of OHT |
| 167 | CE / UL approved manufacturer’s Radartype Level Transmitter for Overhead tank as specified in tender technical specification sheet |
| 168 | 350 mm dia Motor operated Actuator with sluice valveat supply line of OHT |
| 169 | 350 mm dia Dismentaling Joint |
| 170 | Existing Tube Well |
| 171 | SITC of Pumping Plant including, panel, cable, complete in all respect with all required material T&P labour etc. (1200 LPM , 51 m Head , 2900RPM, 25 H.P) |
| 172 | soft starter 22 kw |
| 173 | SITC of Main pipingwith 24 mtr. Column pipe, reflux valve,Painting, Tools with wiring of pump house (internal & external) complete in all respect with required material, T&P labour, chain pully and gauges. - 100 mm dia |
| 174 | Additional column pipe in 3 m length |
| 175 | 100 mm dia Motor operated Actuator with sluice valve |
| 176 | 100 mm dia flow meter |
| 177 | Servo voltage stabilizer oil cooled having capacity 40 KVA fully copper winding three phase A.C supply 50 Hz. Input voltage 240-450 output voltage 415 volt +/- 1% withearthling wire and power cable |
| 178 | 03 Months Trial & Run |
| 179 | Automation of Tubewell |
| 180 | CE & UL approved manufacturer’s RTU/ PLC in IP 54 encloser suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specified, onefor each tubewell & OHT to store and transmit data on GSM backbone. RTU/PLC designed with logic to transfer data at multiple stations including Control panel with IP 54 protection industrial grade for all equipments (Separate for control (24 V) and power equipments) with CE/UL approved manufacturer"s SURGE PROTECTOR FOR Control Panel and CE / UL approved manufacturer’s 7" HMItouchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters as specified in tender technical specification sheet . |
| 181 | G.S.M./G.P.R.S. based wireless communication (Sim) with 4G Modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations, all accessories included with signal enhancer anteena made for pumping plant internet charges as specified in tender technical specification sheet. (in case of OHT where no Tube well or CWR modem can not be used, A stand alone type GSM / GPRS based wireless communication (Sim) with 4G modem will be provided) |
| 182 | CE/UL approved manufacturer"s Intelligent smart energy meter with memory real time clock and 1 serial port integrated with R.T.U. as per specification mentioned in technical bid documents. |
| 183 | CE/UL approved manufacturer"s Electro Magnetic Flow Meter / Ultrasonic Flowmeter suitable to measure the water discharge to be fitted at the outlet of OHT 350 mm dia |
| 184 | Auto Phase reversal unit-Auto phase reversal unit/automatic transfer switch with inbuilt time delay & enclosure of suitable Ampere rating (Confirming to I.E.C. - 60947-1 and I.E.C.- 60947-6-1)as specified in tender technical specification sheet |
| 185 | CE/UL approved manufacturer"swater level transmitter/ Hydro static type level transmitter for submersible depth measurement as specified in tender technical specification sheet. |
| 186 | CE/UL approved manufacturer"s Pressure Transmitter as per specifications specified in tender technical specification sheet. |
| 187 | CE/UL surge protector for control panel |
| 188 | CE/UL Certified 7" HMI Touchscreen suitable to commuticate with PLC / RTU for loac display and control of process parameter. |
| 189 | Complete cabling for Tubewell including all control cable of all equipments & instuments at Pump house and OHT |
| 190 | Control Panel with IP54 protection Indsutrial grade for all equipmets seprate for control (24 Volt) and power equipment. |
| 191 | Instaallation, Testing & Commissioning |
| 192 | Trial Run for 3 Month |
| 193 | ZONE-2 |
| 194 | TUBE WELL |
| 195 | Transportation, installation, dismantling of Rig Machine. |
| 196 | Drillingof bore |
| 197 | GL to 100 MBGL 600 mm. Dia bore |
| 198 | 100 to 120 MBGL 600 mm. Dia bore |
| 199 | Loging of bore hole by deparmental / Approved electric logger |
| 200 | Zone Testing in water quality problem areaa including all required material. Labour, T&P etc complete in all respect |
| 201 | Tube Well Assembly |
| 202 | MS tubewell assembly with all required parts like plain pipe,rings, well cap, clamp, support structure etc. as required & as per typed design complete in all respect.- 300 mm dia. |
| 203 | MS tubewell assembly with all required parts like plain pipe, slotted pipe (as required up to 50% of plain pipe), rings, bail plug, reducer, central guide, etc. as required & as per typed design complete in all respect.- 200 mm dia. |
| 204 | Lowering of Tube well assembly duly welded including welding electrode and shrouding of pea gravel complete in all respect. |
| 205 | GL to 54 MBGL 300 mm dia. |
| 206 | 54 to 100 MBGL 200 mm dia. |
| 207 | 100 to 110 MBGL 200 mm dia. |
| 208 | Development of Tube Well |
| 209 | Transportation, Installation, Dismentalling of 250 PSICompressor. |
| 210 | Charges for Development |
| 211 | Transportation, erection, Dismentalling of 1 cusec OP Unit and yield test. |
| 212 | Charges for Development |
| 213 | Supply of Lal Kuan Pea-Gravel size 1.6 mm to 4.8 mm. Which is to be used during lowering or tubewell assembly and development of tubewell |
| 214 | SITC of Pumping Plant including, panel, cable, complete in all respect with all required material T&P labour etc. (1200 LPM , 53 m Head , 2900RPM, 25 H.P) |
| 215 | soft starter 22 kw |
| 216 | SITC of Main pipingwith 24 mtr. Column pipe, reflux valve,Painting, Tools with wiring of pump house (internal & external) complete in all respect with required material, T&P labour, chain pully and gauges. - 100 mm dia |
| 217 | Additional column pipe in 3 m length |
| 218 | 100 mm dia Motor operated Actuator with sluice valve |
| 219 | 100 mm dia flow meter |
| 220 | Servo voltage stabilizer oil cooled having capacity 40 KVA fully copper winding three phase A.C supply 50 Hz. Input voltage 240-450 output voltage 415 volt +/- 1% withearthling wire and power cable |
| 221 | 03 Months Trial & Run |
| 222 | Automation of Tubewell |
| 223 | CE & UL approved manufacturer’s RTU/ PLC in IP 54 encloser suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specified, onefor each tubewell & OHT to store and transmit data on GSM backbone. RTU/PLC designed with logic to transfer data at multiple stations including Control panel with IP 54 protection industrial grade for all equipments (Separate for control (24 V) and power equipments) with CE/UL approved manufacturer"s SURGE PROTECTOR FOR Control Panel and CE / UL approved manufacturer’s 7" HMItouchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters as specified in tender technical specification sheet . |
| 224 | G.S.M./G.P.R.S. based wireless communication (Sim) with 4G Modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations, all accessories included with signal enhancer anteena made for pumping plant internet charges as specified in tender technical specification sheet. (in case of OHT where no Tube well or CWR modem can not be used, A stand alone type GSM / GPRS based wireless communication (Sim) with 4G modem will be provided) |
| 225 | CE/UL approved manufacturer"s Intelligent smart energy meter with memory real time clock and 1 serial port integrated with R.T.U. as per specification mentioned in technical bid documents. |
| 226 | CE/UL approved manufacturer"s ELECTRO MAGNETIC FLOW METER / ULTRASONIC FLOWMETER suitable to measure the water discharge to be fitted at the outlet of OHT 400 mm dia |
| 227 | Auto Phase reversal unit-Auto phase reversal unit/automatic transfer switch with inbuilt time delay & enclosure of suitable Ampere rating (Confirming to I.E.C. - 60947-1 and I.E.C.- 60947-6-1)as specified in tender technical specification sheet |
| 228 | CE/UL approved manufacturer"swater level transmitter/ Hydro static type level transmitter for submersible depth measurement as specified in tender technical specification sheet. |
| 229 | CE/UL approved manufacturer"s Pressure Transmitter as per specifications specified in tender technical specification sheet. |
| 230 | CE/UL surge protector for control panel |
| 231 | CE/UL Certified 7" HMI Touchscreen suitable to commuticate with PLC / RTU for loac display and control of process parameter. |
| 232 | Complete cabling for Tubewell including all control cable of all equipments & instuments at Pump house and OHT |
| 233 | Control Panel with IP54 protection Indsutrial grade for all equipmets seprate for control (24 Volt) and power equipment. |
| 234 | Instaallation, Testing & Commissioning |
| 235 | Trial Run for 3 Month |
| 236 | Automation of OHT |
| 237 | CE / UL approved manufacturer’s Radartype Level Transmitter for Overhead tank as specified in tender technical specification sheet |
| 238 | 400 mm dia Motor operated Actuator with sluice valveat supply line of OHT |
| 239 | 400 mm dia Dismentaling Joint |
| 240 | Existing Tube Well |
| 241 | SITC of Pumping Plant including, panel, cable, complete in all respect with all required material T&P labour etc. (1200 LPM , 53 m Head , 2900RPM, 25 H.P) |
| 242 | soft starter 22 kw |
| 243 | SITC of Main pipingwith 24 mtr. Column pipe, reflux valve,Painting, Tools with wiring of pump house (internal & external) complete in all respect with required material, T&P labour, chain pully and gauges. - 100 mm dia |
| 244 | Additional column pipe in 3 m length |
| 245 | 100 mm dia Motor operated Actuator with sluice valve |
| 246 | 100 mm dia flow meter |
| 247 | Servo voltage stabilizer oil cooled having capacity 40 KVA fully copper winding three phase A.C supply 50 Hz. Input voltage 240-450 output voltage 415 volt +/- 1% withearthling wire and power cable |
| 248 | 03 Months Trial & Run |
| 249 | Automation of Tubewell |
| 250 | CE & UL approved manufacturer’s RTU/ PLC in IP 54 encloser suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specified, onefor each tubewell & OHT to store and transmit data on GSM backbone. RTU/PLC designed with logic to transfer data at multiple stations including Control panel with IP 54 protection industrial grade for all equipments (Separate for control (24 V) and power equipments) with CE/UL approved manufacturer"s SURGE PROTECTOR FOR Control Panel and CE / UL approved manufacturer’s 7" HMItouchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters as specified in tender technical specification sheet . |
| 251 | G.S.M./G.P.R.S. based wireless communication (Sim) with 4G Modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations, all accessories included with signal enhancer anteena made for pumping plant internet charges as specified in tender technical specification sheet. (in case of OHT where no Tube well or CWR modem can not be used, A stand alone type GSM / GPRS based wireless communication (Sim) with 4G modem will be provided) |
| 252 | CE/UL approved manufacturer"s Intelligent smart energy meter with memory real time clock and 1 serial port integrated with R.T.U. as per specification mentioned in technical bid documents. |
| 253 | CE/UL approved manufacturer"s ELECTRO MAGNETIC FLOW METER / ULTRASONIC FLOWMETER suitable to measure the water discharge to be fitted at the outlet of OHT 400 mm dia |
| 254 | Auto Phase reversal unit-Auto phase reversal unit/automatic transfer switch with inbuilt time delay & enclosure of suitable Ampere rating (Confirming to I.E.C. - 60947-1 and I.E.C.- 60947-6-1)as specified in tender technical specification sheet |
| 255 | CE/UL approved manufacturer"swater level transmitter/ Hydro static type level transmitter for submersible depth measurement as specified in tender technical specification sheet. |
| 256 | CE/UL approved manufacturer"s Pressure Transmitter as per specifications specified in tender technical specification sheet. |
| 257 | CE/UL surge protector for control panel |
| 258 | CE/UL Certified 7" HMI Touchscreen suitable to commuticate with PLC / RTU for loac display and control of process parameter. |
| 259 | Complete cabling for Tubewell including all control cable of all equipments & instuments at Pump house and OHT |
| 260 | Control Panel with IP54 protection Indsutrial grade for all equipmets seprate for control (24 Volt) and power equipment. |
| 261 | Instaallation, Testing & Commissioning |
| 262 | Trial Run for 3 Month |
| 263 | ZONE-3 |
| 264 | TUBE WELL |
| 265 | Transportation, installation, dismantling of Rig Machine. |
| 266 | Drillingof bore |
| 267 | GL to 100 MBGL 600 mm. Dia bore |
| 268 | 100 to 120 MBGL 600 mm. Dia bore |
| 269 | Loging of bore hole by deparmental / Approved electric logger |
| 270 | Zone Testing in water quality problem areaa including all required material. Labour, T&P etc complete in all respect |
| 271 | Tube Well Assembly |
| 272 | MS tubewell assembly with all required parts like plain pipe,rings, well cap, clamp, support structure etc. as required & as per typed design complete in all respect.- 300 mm dia. |
| 273 | MS tubewell assembly with all required parts like plain pipe, slotted pipe (as required up to 50% of plain pipe), rings, bail plug, reducer, central guide, etc. as required & as per typed design complete in all respect.- 200 mm dia. |
| 274 | Lowering of Tube well assembly duly welded including welding electrode and shrouding of pea gravel complete in all respect. |
| 275 | GL to 54 MBGL 300 mm dia. |
| 276 | 54 to 100 MBGL 200 mm dia. |
| 277 | 100 to 110 MBGL 200 mm dia. |
| 278 | Development of Tube Well |
| 279 | Transportation, Installation, Dismentalling of 250 PSICompressor. |
| 280 | Charges for Development |
| 281 | Transportation, erection, Dismentalling of 1 cusec OP Unit and yield test. |
| 282 | Charges for Development |
| 283 | Supply of Lal Kuan Pea-Gravel size 1.6 mm to 4.8 mm. Which is to be used during lowering or tubewell assembly and development of tubewell |
| 284 | SITC of Pumping Plant including, panel, cable, complete in all respect with all required material T&P labour etc. (1200 LPM , 51 m Head , 2900RPM, 25 H.P) |
| 285 | soft starter 22 kw |
| 286 | SITC of Main pipingwith 24 mtr. Column pipe, reflux valve,Painting, Tools with wiring of pump house (internal & external) complete in all respect with required material, T&P labour, chain pully and gauges. - 100 mm dia |
| 287 | Additional column pipe in 3 m length |
| 288 | 100 mm dia Motor operated Actuator with sluice valve |
| 289 | 100 mm dia flow meter |
| 290 | Servo voltage stabilizer oil cooled having capacity 40 KVA fully copper winding three phase A.C supply 50 Hz. Input voltage 240-450 output voltage 415 volt +/- 1% withearthling wire and power cable |
| 291 | 03 Months Trial & Run |
| 292 | Automation of Tubewell |
| 293 | CE & UL approved manufacturer’s RTU/ PLC in IP 54 encloser suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specified, onefor each tubewell & OHT to store and transmit data on GSM backbone. RTU/PLC designed with logic to transfer data at multiple stations including Control panel with IP 54 protection industrial grade for all equipments (Separate for control (24 V) and power equipments) with CE/UL approved manufacturer"s SURGE PROTECTOR FOR Control Panel and CE / UL approved manufacturer’s 7" HMItouchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters as specified in tender technical specification sheet . |
| 294 | G.S.M./G.P.R.S. based wireless communication (Sim) with 4G Modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations, all accessories included with signal enhancer anteena made for pumping plant internet charges as specified in tender technical specification sheet. (in case of OHT where no Tube well or CWR modem can not be used, A stand alone type GSM / GPRS based wireless communication (Sim) with 4G modem will be provided) |
| 295 | CE/UL approved manufacturer"s Intelligent smart energy meter with memory real time clock and 1 serial port integrated with R.T.U. as per specification mentioned in technical bid documents. |
| 296 | CE/UL approved manufacturer"s ELECTRO MAGNETIC FLOW METER / ULTRASONIC FLOWMETER suitable to measure the water discharge to be fitted at the outlet of OHT 200 mm dia |
| 297 | Auto Phase reversal unit-Auto phase reversal unit/automatic transfer switch with inbuilt time delay & enclosure of suitable Ampere rating (Confirming to I.E.C. - 60947-1 and I.E.C.- 60947-6-1)as specified in tender technical specification sheet |
| 298 | CE/UL approved manufacturer"swater level transmitter/ Hydro static type level transmitter for submersible depth measurement as specified in tender technical specification sheet. |
| 299 | CE/UL approved manufacturer"s Pressure Transmitter as per specifications specified in tender technical specification sheet. |
| 300 | CE/UL surge protector for control panel |
| 301 | CE/UL Certified 7" HMI Touchscreen suitable to commuticate with PLC / RTU for loac display and control of process parameter. |
| 302 | Complete cabling for Tubewell including all control cable of all equipments & instuments at Pump house and OHT |
| 303 | Control Panel with IP54 protection Indsutrial grade for all equipmets seprate for control (24 Volt) and power equipment. |
| 304 | Instaallation, Testing & Commissioning |
| 305 | Trial Run for 3 Month |
| 306 | Automation of OHT |
| 307 | CE / UL approved manufacturer’s Radartype Level Transmitter for Overhead tank as specified in tender technical specification sheet |
| 308 | 200 mm dia Motor operated Actuator with sluice valveat supply line of OHT |
| 309 | 200 mm dia Dismentaling Joint |
| 310 | Local Control Station (LCS) |
| 311 | CE/UL & BIS Certified industrial grade LED Motitor with latest configuration as per specification. |
| 312 | Desktop / PC with i5/i7 peocessor for as per specification mentioned in technical bid documents. |
| 313 | CE / UL Certified 3 KVA UPS with batteries as per specification mentioned in technical bid documents. |
| 314 | Full development version of required TAGS SCADA software with customization of softwarefor LCSas per requirement as per specification mentioned in technical bid documents |
| 315 | CE & UL Certifiedlocal control room PLC with RedundantCPU &power supply at LCS in IP 54 enclosure as spec mentioned in technical bid documents |
| 316 | GSM based wireless communication/Broadband /Equivalentcommunication system for PLC capable tranfer & receive data and gather data from remote sites to control stations. All accessories included signal enhancer antenna along with running expences till DLP. |
| 317 | CE/UL Certified Firewall for network protection. |
| 318 | Surge Protector for Ethernet communication protection |
| 319 | CE/UL Certified industrial grade Ethernet Switch. |
| 320 | CANON/H.P. or equivalent Laser Printer |
| 321 | Security Survelliance IP Camera with recoder for LCS |
| 322 | Installation & Commissioning and testing including required furniture, A/c etc. |
| 323 | Test and Trial Run for 3 Months |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
