Military Engineer Services-MES has published Tender For Certain Repair To Internal Roads, Including Approach Road And Road Furniture At Kiari, Chumathang And Nyoma In The Area Of Age Br-Ii Under Ge 860 Ews At Karu. Submission Date for this Tender is 15-01-2024. Road Work Tenders in Leh Ladakh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 30-Dec-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-01-2024 |
| 2 | 06-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-01-2024 |
| 3 | 11-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-01-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of stone/PCC block/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for Providing and laying at or near ground level factory made Kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement morter 1:3 (1 cement: 3 coarse sand) including making joints with or withoutgrooves (thickness of joint except at sharp curve shall not to more than 5 mm) including making drainage opening wherever require , complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L forPainting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow adequate no of coats, complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre line, stop lines, dashes, arrows etc and the like n. exc 10 cm wide on road pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS3262-1989 with special applicator machine all as per manufacturars instruction, complete all as specified and directed by Engr-in-Charge. |
| 5 | S&F in repair convex mirror 80 cm dia in size outdoor purpose incl stand padestal embedded on PCC block 1:2:4 type B1 size 45 x45x60 cm and necessary earth work complete all as specified and directed by Engr-in-Charge. |
| 6 | S&F in repair cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of Model No DA 972.0 fixed with incl MS stud if suitable size as per manufacturars instruction complete as specified and directed by Engr-in-Charge. |
| 7 | S&Fin repair modified thermoplastic (polymer rubberised) speed breaker (retarders) with chequered design of size 250x365x50mm to resist compressive strength 30m tons in yellow and black colour fixed with anchor fastner bolt+material two component Epoxy adhesive A,complete all as specified and directed by Engr in charge. |
| 8 | Supply and fix solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiancy mono rystafie solar panel 2.4V / 0.3 watt one NI-ed rechargable battery (1.2 V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc, complete all as specified and directed by Engr-in-Charge. |
| 9 | Manufacturing, supplying and fixing both sides retro reflective Cautionary /warning Road sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , complete all as specified and directed by Engr-in-Charge. |
| 10 | manufacturing, supplying and fixing retro reflective regulatory road sign boards both sides of size 900 mm diameter made out 2mm thick aluminium sheet, fece to be fully covered with high intensity encapsulatd lens type retro reflective sheeting as approved by Engr-in-Charge. Letters, symbols and boarders etc as per IRC-67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to MS frame of angle iron of size 40x40x4 mm. The boards will be fixed to 2 No 50x50mm square post made of MS angle 50x50x4mm, 4 m long welded to the frame with adequate anti-theft arrangement. Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete all respects as per direction by Engr - in -Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
