Zilla Parishad-ZP has published Re-Orientation Of Office Space In Connection With The Programme Of Geo-Referencing And Land Gis System In The Office Of Dlr&S, Wb, Survey Building,Alipore, Kolkata-27 Under Kolkata. Submission Date for this Tender is 09-01-2024. Survey Works Tenders in kolkata West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | RE-ORIENTATION OF OFFICE SPACE,Electrical Works |
| 2 | Supplying and fixing 100 A,415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating(Havell"s make)(P-D3,It-4a) |
| 3 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded "FR" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish.(avg run- 7m) |
| 4 | Supplying and fixing double door Horizontal 4 + 6 way TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment |
| 5 | 63 A FP Isolator |
| 6 | 6-32 A SP MCB |
| 7 | Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required |
| 8 | Distribution wiring with the following size cables in 19mm bore 3mm thick polythene pipe including cutting channel of 40mm X 40mm size in masonry wall and mending good damages with Supplying and Drawing 1.1 KV single core stranded "FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes and making necy. connection as required.(P-E-9) |
| 9 | i) 2 X 1.5 sqmm & 1 X 1.5 sqmm |
| 10 | ii) 2 X 2.5 sqmm & 1 X 1.5 sqmm |
| 11 | iii) 2 X 4 sqmm & 1 X 2.5 sqmm |
| 12 | iv) 2 X 6 sqmm & 1 X 4 sqmm |
| 13 | Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc |
| 14 | Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections. |
| 15 | Supply & Fixing 240 V, 25A Modular starter (Brand approved by EIC) on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 16 | Supply & Fixingof Bracket fan |
| 17 | Supply & Installation of 2 TON Split AC With all necessary work & also 5 meter cu pipe like Mistuvishi make. |
| 18 | Supply of 1.1KV grade 4core 50 sqmm cable XLPE Ar. Aluminium cable |
| 19 | Laying of cable from 3/3½ core 50 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting |
| 20 | Civil works |
| 21 | Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) In 2nd floor including roof. |
| 22 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed |
| 23 | Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. |
| 24 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] 2nd Floor (Extra for lifting) (ii) With 1:4 cement mortar (c) 10 mm thick plaster |
| 25 | (a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer"s specification [Cement to be supplied by the Department] |
| 26 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) 2nd floor (Extra for lifting) |
| 27 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer"s specification and as per direction of the EIC (a) One Coat i) Water based interior grade Acrylic Primer |
| 28 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specifi instruction of Superintending Engineer) : (Two coats) ii) Luxury Quality |
| 29 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 30 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 31 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) |
| 32 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) |
| 33 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) (ii) 4 mm thick |
| 34 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer"s specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (B) Light Colour |
| 35 | Supply, fitting & fixing of rectangular workstation of size- 1050WX600Dx750H mm, panel height of 1200mm and thickness of 52.4mm on the main spine and 25mm on the return side. The spine comprises of blocks comprising of 38mm thick paper honeycomb with 3mm MDF on each sides and 0.6mm decorative laminate and fabric on both sides. the panel structure made of aluminium extrusion having material AL96063-T6 and have average wall thickness of 1.2mm & powder coated with epoxy-polyester powder. Top tile is split into Fabric tackable tile and split white board. The Fabric tackable tile shall be upholstered metal tiles in 0.6mm thick G.I. grade D as per IS: 277, with P.E. foam in the tile for tackability. White board tiles shall be made of 8.0mm particle board conforming to IS: 12823 laminated with 0.6mm thick white glossy high pressure laminate on outer side & 0.6mm backing laminate on inner surface and will be having all its edges with minimum 0.5mm thick PVC edging. The intermediate blocks made from 18mm thick PLB battens which hold 3mm MDF in between. 6mm thick PE foam shall be pasted on 3mm thick MDF and this assembly shall be upholstered with approved shade of fabric on both sides using adhesive. Bottom tile is metal powder coatedmetal tiles in 0.8 mm thick M.S. CRCA Grade D as per IS: 513. Workstation panel of 52 mm Thk (The spine panel) shall have provision of cutout for a 4 module on the block above worksurface and a 6 module electrical +2 module data switch on the bottom block (below work surface). The switch cutouts will be located below the fabric tackable split tile in the spine (52 mm thick) panel. Work top shall be made of 25 mm thick prelaminated particle board interior grade (As per IS:12823). Bottom shall have a backing laminate of minimum 0.6mm thickness. All the edges of work surface shall be provided with machine pressed 2mm thick PVC edge band glued with hotmelt EVA glue. Pedestal-Welded assembled 0.8 thk CRCA for Body shell, drawer front & tray, front side stiffner, Rear side stiffner. 1.2 thk CRCATop stiffner & bottom stiffner 10 lever cam lock & central RH locking with actualor & lock channel mechanism for " Free standing Full height BoxBoxfile" Pedestal. KBPT Dimensions(tray)-473X200 mm, Weight-3.2 Kg, material- CRCA steel finish: Powder coated, thickness-0.6mm, Trolley-Dimensions- Adjustable width (150- 225 mm), Weight- 1.5 Kg. Material- CRCA steel finish : powder coating, Thickness- 0.8 mm Approved make : Godrej or similar make. |
| 36 | Supplying, fitting & fixing of visitor chair as per following specification. Seat assembly: The seat assembly should be made up of 1.2 ± 0.1 cm thick hot pressed upholstered with fabric upholstery covers and moulded polyurathene foam. Seat size: 47.0 cm (w) x 48.0 cm (h) back assembly. The back assembly should be made of powder coated ( blt 40-80 microns) tubular frame of 2.54 ± 0.03 cm x 0.2±0.016 cm thick m.s.e.r.w tube designed with contoured lumbar support for extra comfort, the back should be uphoisted using double layer spacer mesh fabric with high tenacity yam, back size 46.5 cm (w) x 60.5 cm (h) high resilience (hr) polyuthrane foam: The hr polyiuthrane foam should be moulded with density =45 ± 2 kg/m3 and hardness load 16± 2 kgf for 25% compression. Armrest: the onepiece armrests should be injection moulded from black co-polymer poilypropylene. Tubular frame: The powder coated (dft 40-60 microns) tubular frame should be cantilever type & made of 2.54 ± 0.03 cmx 0.2±0.016 cm thick m.s.e.r.w tube. Overall dimension of chair: Seat height- 46.5 cm, height- 93.5 cm, width & depth of chair as measured from pedestal- width 61.0cm and depth 64.5 cm. Approved make: Godrej or similar make |
| 37 | Supplying wooden moulding slanting beat of size 37mm X 18mm (finished) of approved design to finish the joint between wooden frame of door/window with masonary in true line and level fitted & fixed with adhesive and head less pins complete as per direction of Engineer -in-charge. a) Teak wood beat |
| 38 | Supplying, fitting and fixing Godrej Multi Lock or equivallent . |
| 39 | Taking out existing partition/ceiling of particle board, masonite board, ply board, soft board etc. of any thickness and refixing same in new position with necessary clamps making holes in walls, floor, roof and mending damages if any.[concrete plaster will be paid separately] |
| 40 | ii) Godrej Hydraulic door closer fitted and fixed complete. (a) Heavy type |
| 41 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Second floor (iv) 12mm |
| 42 | Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof. In 2nd floor Glossy/Matt/Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1.5mm |
| 43 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal/ Round rod) (ii) 100 mm grip x 10 mm dia rod. |
| 44 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: (iii) 75 x 45 x 2.5mm. |
| 45 | Mazdoor(male) for removing and repositioning of Almirah & others |
| 46 | Add 18% GST |
| 47 | Add 1% L&W cess |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
