Military Engineer Services-MES has published Tender For Repair / Replacement Of Path, Fencing, Boundry Wall And Culvert Etc Under Age B/R -I And Repair And Maintenanace Of Dad Installation Under Age B/R Ii At New Cantt Prayagraj. Submission Date for this Tender is 08-01-2024. Wall construction Tenders in prayagraj Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-Jan-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-01-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of brick wok built in cement mortar including all quoins,arches,pillars,etc but excluding ashlar facing,dressed stone work,precast concrete article complete all as specified |
| 2 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground as directed and specified. |
| 3 | Demolition of cement concreteincluding floor tiles or stone in any description and inany position not otherwise specifically provided forand removal from site complete all as specified and directed. |
| 4 | Dismantling of floor hearth or wall tling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 5 | M&L for providingPCC 1:4:8 type B-2 (using 40mmgraded stone aggregate ) as foundations, filling, and mass concrete etccomplete all as specified and directed. |
| 6 | M&L 40 mm thick PCC flooring type B1(1:2:4) (using 20 mm graded aggregate) with even and smooth surface by using extra cement and with glass dividing strips complete all as specified and directed. |
| 7 | S&F 38 x 3 mm size glass dividing strips fixed in floor complete all as specified. |
| 8 | M&L for vitrified pavement outdoor tiles of 300mm X 300mm X 9-10 mm thick coloured for floor /pavement etc and jointed in solvent and pointed in coloured cement to match the tiles including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed. |
| 9 | M&L forjoint free non skid, ceramic“coloured” tiles7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 10 | M&L for joint free non skid, ceramic “coloured” tiles7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 11 | M&L for joint free non skid, Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.36sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 12 | M&L for Glazed ceramic colouredtiles 7 to 8mm thick tile, area exceeding 0.13 and n.exc 0.18 Sqm in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick renderingor backinglayer in cement mortar 1:4 complete all as specified and directed. |
| 13 | M&L for first or premium quality heavy duty digital pavement tiles 300mmX300mmX10mm/ 400mmX400mmX12mm thick coloured for floor/pavement etc & jointed in neat cement slurry and pointed with white cement fixed with colour pigment to match colour of tilesincluding 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 14 | M&L for exterior finish designer wall tiles, coiloured, superior quality, 7 to 8 mm thick area of tile exceeding 0.09 and n.exc 0.18 Sqm each in wall and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 15 mm thick renderingor backinglayer in cement mortar 1:6 complete all as specified and directed. |
| 15 | M&L for 60 mm thick M-35 grade factory made rubber moulded vibratory compacted cement concrete interlocking paver block in approved design and colour confirming to IS 15658-2006 with grey cement and pigment as approved and laid over and including 25 mm thick stone cushion and joints filling with sand complete all asspecified and directed. |
| 16 | All as per Srl item No. 15 but except interlocking paver block in approved design and colour confirming to IS 15658-2006 with grey cement and pigment as approved and laid over and including 25 mm thick stone cushion and joints filling with sand complete all asspecified and directed. |
| 17 | M&L for 80 mm thick M-40 grade factory made rubber moulded vibratory compacted cement concrete interlocking paver block in approved design and colour confirming to IS 15658-2006 with grey cement and pigment as approved and laid over and including 25 mm thick stone cushion and joints filling with sand complete all asspecified and directed. |
| 18 | All as per Srl item No. 17 but except interlocking paver block in approved design and colour confirming to IS 15658-2006 with grey cement and pigment as approved and laid over and including 25 mm thick stone cushion and joints filling with sand complete all asspecified and directed. |
| 19 | S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and directed. |
| 20 | S & F Mild steel screw bolt (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends, dia of shank 5 to 10 mm and lengthexceeding 5 cm and not exc 10 cm long and the dia of neck not less than 10 mm to be fitted with washers and one hexagonalnut etc complete all as directed and specified. |
| 21 | Dismantling of chain link fencing wire mesh any type complete all as specified and directed. |
| 22 | Supply only galvanised iron chain link fencing including line wires, any mesh, size and type to any standards, rails, straining bolts etc including provision of binding wire complete all as specified & directed. |
| 23 | Fixing only chain link fencing100 mm x 100 mm, 4 mm dia including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wires complete all as specified & directed. |
| 24 | S & FGalvanised2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as directed and specified.(each line wire to be measured) |
| 25 | All as per item No 23 as above but except barbed wire. |
| 26 | S&F concertina coil 600 mm dia (stretched position) hot dip galvanised including “U” and “C” clips, having 50 Nos of spirals in 6 mtr stretch length and composed of reinforced punched razor ribbon tape wire having continuous horizontal reinforced barbed wire, stud tide with staple & clips to retain horizontal including bolt on both sides fixing to the "Y" of trapezoidal shaped angle iron brackets placed at 2 to 3 metre apart complete all as specified Notes : [a] Horizontal barbed wire will be measured and paid separately under relevant items of BOQ |
| 27 | S&F including fabrication of framed work such as in grills, grating ,hold fast of door and window chowkat etc., with ends of bars shouldered and or riveted or forget into spikes, frames guard bars, barred iron doors, and similar work conforming toFe 290 Gde-E-165 complete all as specified and directed |
| 28 | S&F MS framed work as in doors frame,doors or gates of angle iron,door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc. to prepared for hanging or sliding with includingeither hooks and hinges, also fastening and fixing and similar work confirming to Fe 290 Gde-E-165 complete all as specified. |
| 29 | M&L for preparation of new or previously untreated surfaces of steel or Iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red Oxideprimer complete all as specified and directed. |
| 30 | M&L for 18 to 20 mm thick Granite work (table rubbed and polished) in cooking platforms and similar works in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite including 15 mm thick screed bed in CM 1:6 in repairs complete all as specified. |
| 31 | M&L for 75 mm thick cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate in plinth protection finished even and fairincluding necessary form work and cutting of joints etc complete all as specified. |
| 32 | M & L Brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed |
| 33 | All as per srl item No 32 above but except old size sub class "B" bricks complete all as specified and directed. (Note:- Old bricks retrieved from demolition shall be re-used) |
| 34 | M&L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.. |
| 35 | Taking down cement plaster on brick wall or stone wall etc including raking out joints hacking for key, scrubbing down with water etc completeall as specified and directed |
| 36 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 37 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement with water proofing compound complete all as specified and directed. |
| 38 | M&L for rendering 5 mm thickin CM 1:3 on ceiling of RCC or brick finished fair and even without using extra cement. complete all as specified and directed. |
| 39 | Supply only liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 40 | M&L for preparation of newly plastered surface of ceiling and applying two coats of white washcomplete all as specified and directed. |
| 41 | M&L for preparation of newly plastered surface of wall and applying two coats of white washcomplete all as specified and directed. |
| 42 | M&L for Preparation of newly plastered surfaces of wall and applying two coats of cement based paint over & including a coat of primer complete all as specified and directed. |
| 43 | M&L for plain cement concrete 1:2:4 type B2 using 40 mm graded stone aggregate as in surface channel or surface drain including forming and finishing with extra cementincluding demolition of existing concrete surface complete all as specified and directed. |
| 44 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete as directed and specified. |
| 45 | Add or deduct for each 25 mm girth or part thereof over or under 30cm complete as directed and specified. |
| 46 | Supply and laying of reinforced cement concrete pipes, class NP2 of 300mm dia bore of pipe laid and jointed complete with collars complete all as specified and directed. |
| 47 | M&L for reinforced cement concrete type B1 using 20mm graded aggregate as in slabs supported on walls, beams, and columns in floors, roofs landings, balconies ,canopies , deck slabs and in shelves and the like complete all as specified and directed. |
| 48 | M&L form work to suspended slab as in kitchen shelves etc complete all as specified and directed. |
| 49 | M&L TMTbar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking end and binding with and including mild steel wire and annealednot less than .9 mm dia or securing with clips complete all as specified and directed. |
| 50 | S & F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to wall or laid in trench or in floor complete all as specified and directed. |
| 51 | S & F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to wall or laid in trench or in floor complete all as specified and directed. |
| 52 | S & F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 53 | S & F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 54 | S & F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed. |
| 55 | Dismantling of mild steel work of any description in any position complete all as specified and directed. |
| 56 | Dismantling of plainor corrugated steel sheeting, any gauge, thickness, including Nainital orsimilarpattern roof coverings including ridges completeall as specified and directed. |
| 57 | M&L Prepainted galvalume aluminium zinc coating GI based corrugated coloursteel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed. |
| 58 | M&L Prepainted galvalume aluminium zinc coating GI based plain coloursteel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified& directed. |
| 59 | S&F for Rolled mild steel hollow sections conforming to Gde Fe-290(Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, posts etc fixed with angle cleats or other connecting plates complete all as specified. |
| 60 | S&F in repairStainless steel letters 450 mm height and 32 mm depth made of 1 mm thick stainless sheet with seamless welding rubbed polished and edges made smooth with necessary fixing devices complete all as specified and directed . |
| 61 | S&F 12 mm thick toughened glass door with suitable locking arrangement with lock (Godrej/link) 6 lever and self closing devices with rebates including jointing cleats of suitable section for fixing builders hard ware fittings door spring with two Nos decorative type aluminium handle of200 mm dia,complete all as specified and directed. |
| 62 | M&L for Preparation of old surfaces of wall and applying one coat of cement based paint complete all as specified and directed. |
| 63 | M&L for preparation of old decorated surface of ceiling and applying one coat of white wash on ceiling complete all specified and directed. |
| 64 | M&L for providing cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in lintle upto 1.5 mtr clear span, cills, step seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all specified and directed. |
| 65 | M&L for glazed ceramic coloured wall tiles in vertical surface 300X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed. |
| 66 | M&L for preparation of old painted surface of wooden work and applying one coat of synthetic enamel paint on surfaces of any description exc 10 cm width or girth with paint sprayerscomplete all as specified and directed. |
| 67 | M&L for preparation of old painted steel surfaces and apply one coat of synthetic enamel paint on grills, guard bars ,shutters etc complete all as specified and directed. |
| 68 | M&L for preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer with paint sprayers, complete all as specified and directed. |
| 69 | M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer with paint sprayers complete all as specified and directed. |
| 70 | M&L for preparation of old decorated / plastered surfaces of wall and applying one coat of cement based paint complete all as specified and directed. |
| 71 | M&L applying two coat of Dr Fixit sure seal damproof chemical on plaster/unplastered surfaces complete as per manufacturer"s instructions all as specified & directed. |
| 72 | Taking up or down 15 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed |
| 73 | Refixing old 15 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed. |
| 74 | S&F 15 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified. |
| 75 | Taking up or down 20 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed |
| 76 | Refixing old 20 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed |
| 77 | S&F 20 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified. |
| 78 | S&F in repair of vitreous china wash basin, white flat back type of size 550x400 mm including brackets, cutting for and pinning in ends of brackets in CM 1:3 including 32 mm dia chromium plated waste coupling 32 mm dia 450 mm long waste pipe complete all as specified and directed |
| 79 | S & F of pillar tap, cast copper alloy with capstan heads, fancy type, chromium plated screwed down high pressure, with or with out lettered "Hot" or "Cold" with long screwed shank and fly nuts ,screwed for iron pipe 15 mm bore, fixed in repairs complete all as specified and directed |
| 80 | S & F in repair of pillar tap, cast copper alloy with capstan heads, fancy type, chromium plated screwed down high pressure, with or with out lettered "Hot" or "Cold" with long screwed shank and fly nuts ,screwed for iron pipe 15 mm bore, fixed in repairs complete all as specified and directed |
| 81 | S&F in repair stop valve15mm dia cast copper alloy, CP fancy type with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handles screwedboth endsfor iron pipe or for unions, and fixed in pipe complete all as specified and directed |
| 82 | S&F in repair 600x450x5mm thick bevelled edge looking mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood or PVC sheet & fixed to plug with chromium plated brass screws and cup washers complete all as specified and directed. |
| 83 | S&F in repair PVC waste pipe60 cm long for WHB / sinkwith cup, complete all as specified. |
| 84 | S&F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed. |
| 85 | M&L for PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in bed blocks for hold fast, coping erection of posts etc complete all as specified & directed. |
| 86 | S&F in repair rotational moulded, multilayer HDPE water storage tank (white colour three layer) of 500 ltrs capacity(Cylindrical vertical with closed top)ISI marked fixed in position on existing places complete and refixing of inlet, outlet & overflow pipe etc, complete all as specified and directed. |
| 87 | S&F in repairs Ball Valves 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified & directed. |
| 88 | S&F in repair PVC connection 15mm dia and 450mm long with 2 Nos PTMT nuts,complete all as specified. |
| 89 | S&F in repair for grating doom 100 mm dia of PTMT.(Minimum weight 25gms) complete all as specified and as directed. |
| 90 | S&F in repairbib taps with capstan head with wall flange 15mm bore, fancy type, quarter/half turn, brass chromium plated, long body with capstan head( weight of each bib tap should not less than 0.575kg) and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed. |
| 91 | S&F in repairs vitreous China squatting pan, `Orissa" pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding and connection to trap, out going flushing pipe,anti syphonage pipe etc. Complete all as specified and as directed. |
| 92 | M&L for preparation of newly plastered surfaces of wall scrapping machine tools /electric hand grinder with sand paper, wire brush and applying two coat of oil bound distemper white or tinted with paint sprayers over a coat of primer over & including2 to 3 mm thick wall care putty complete all as specified and directed. |
| 93 | Taking down chowkat with shutter (without taking off shutters from the frame) area not exc 1.5 Sqm each and removing from site complete all as specified and directed. |
| 94 | Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each and removing from site complete all as specified and directed. |
| 95 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other Frames/ Chowkhat of size 65X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 96 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. (Note: stainless steel butt hinges and necessary stainless steel screws shall be paid separately) |
| 97 | S&F solid prelam moulded PVC double door frame of size 50mm x 95mm made single side prelam PVC sheet used instead of plain colour PVC sheet as per specification & drg.. |
| 98 | S&F Factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed. |
| 99 | S&F in repair for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack for galvanized wire staple all as specified & directed. |
| 100 | S&F galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack for galvanized wire staple all as specified & directed. |
| 101 | M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed. |
| 102 | M&L for 4mm thick sheet glass Figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed. |
| 103 | S&F 300mm long MS sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple complete all as specified and directed. |
| 104 | S&F MS butt hinges cold rolled medium weight of size 100 mm etc complete all as specified & directed. |
| 105 | S&F MS 150 mm pressed handles oval type stove enamelled black complete all as specified & directed. |
| 106 | S&F for MS barrel tower bolts of extruded section 200 mm long complete all as specified & directed. |
| 107 | S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed |
| 108 | S&F 100mmlong Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodizedcomplete all as specified and directed |
| 109 | S&F 100mm long aluminium alloy handle cast type anodized. complete all as specified and directed |
| 110 | M&L for complete removal of existing finishes / treatment of existing surface of over head RCC water tank (height not less than 23 Mtr) including soffit of dome, column, bracing etc by steel wire brush or by any other means, washing the surface thoroughly, filling the surface cracks upto or less than 10 mm with sealing compound " cracks x shrink free of Dr fixit, applying exterior grade wall care putty 2 Kg/ 10 Sqm to make the surface even & smooth, completely undulation free, applying a coat of Biocide / anti algai or fungal primer and two coat of dulux weather coat of specified make complete all as specified & directed. Note:- The external painting work will be got done through the manufacturer or their authorised agents. Certificate of work done by manufacturer be produced by the contractor during payment. 2. The rate of provision of scaffolding and its removal is deemed to be included in the quoted rate. |
| 111 | Schedule of Credit (MINUS) Rs. 93357.00 B/F from Serial Page No.[Note : Detailsof items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
