West Bengal State Electricity Distribution Company Limited-WBSEDCL has published Work For Civil Work (I.E Aluminium Partition, Cash Table, Consumer Sitting Etc.) At Newly Hired Premises For Accommodation Of Raina C.C.C Under Burdwan(S) Division.. Submission Date for this Tender is 27-12-2023. Civil Work Tenders in burdwan West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 125mmThickbrickworkwith1stclassbricksincementmortar(1:4)in Gr.floor |
| 2 | Plaster( towall,floor,ceilingetc.)withsansandcementmortarincludingroundingofforchamferingcornersasdirectedandrackingoutjointsincludingthroating,nosinganddripcourse,scaffolding/ stagingwherenecessary.i) With1:6cementmortar : a) 15mm.thick( Gr.Floor) |
| 3 | Neatcementpunningabout1.5 mm.inwalldado windowsillsdrainetc. |
| 4 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:a) 100mm long x 10mm dia. Bolt |
| 5 | b) 225 mm.long&10 mm.diaboltof |
| 6 | Supplying,fittingandfixinganodizedaluminum‘D’typehandleofapprovedqualitymanufacturedfromextrudedsectionconfirmingtoI.S.specification(I.S. 230/72)completewithcontibuousplatebase.100 mm.gripx10 mm. diarod. |
| 7 | Supplying,fittingandfixingDoor stopper.(Brass) |
| 8 | Supplying 6 levers "Godrej" Crystal Satine Mortice Lock with keys including fitting & fixing complete |
| 9 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.600 mm X 450 mm |
| 10 | Glassshelveswithaluminiumguardrailssize600 x 125 mm.with5.5 mm.thickglass. |
| 11 | (a)Supplying, fitting and fixing liquid soap container Cromium plated. |
| 12 | (b)Supplying, fitting and fixing soap holder (i) PTMT (Prayag or equivalent) |
| 13 | Supplying,fittingandfixing C.P.overbrassapprovedbrandtowelrail25 mm.dia450 mm.longwithtwobracketscomplete allrespectasperdirectionofengineer-in-charge. |
| 14 | a) Fixed partitions. (Unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 sq.m.)i) Top , bottom & side member. |
| 15 | ii) Intermediate member. |
| 16 | b) Fixed partitions. ((Unsupported length of vertical member more than 1.5 mtr.or both ends of vertical member restrained but panels more than 0.9 Sq.m)i) Top , bottom & side member. |
| 17 | ii) Intermediate member. |
| 18 | a) "U" shaped EPDM gasket for frames. |
| 19 | b) EPDM / weather gasket for outer frame and mullion. |
| 20 | c) weather gasket / wool pile for door vertical. |
| 21 | Supplying heavy duty hydraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge |
| 22 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. (i)5mm thick clear glass. |
| 23 | (ii)6mm thick clear glass. |
| 24 | Supplying, profilesofrequiredsectionmadeofaluminumalloyextrusiveconfirmingtoI.S.733-1983andI.S.1285-1975anodisedfilmthicknessandspecificationcolour/natural)mattfinishedconfirmingI.S.1868-1983forfabricationofcompositedoor, sliding & casement windows, partitions, formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-in -charge (payment will be made on finished length of the work) A) In10-12micronthicknessAnodizingfilma) Movabledoorshutter : i) Doorframe(top&sides) |
| 25 | ii) Shuttertoprail |
| 26 | iii) Shutterbottomrail |
| 27 | iv) Shutterlockrail |
| 28 | v) Doorvertical |
| 29 | vi) Glazingclip |
| 30 | Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units: (A)Partly glazed and partly panelled partition or fixed glazing made of extruded and anodised alloy aluminium sections, fabrications after cutting to proper shape and size, drilling and aligning fitted with inbuilt locking arrangement cutting the glass / board (prelaminated / particle / block) to requisite shape and size moulding the edges fitted and fixed glazing clips and dry set neoprine /EPDM gasket, along with all other necessary arrangements for fixing the partition to walls, floors, beams, columns polysulphide sealant for water proofing if necessary complete in all respect as per drawing and specifications and direction of the Engineer in charge.For partitions using section of size:63.50 mm x 38.10 mm 1st Floor |
| 31 | (B) Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge. Gr. Floor |
| 32 | (C)Partly glazed and partly panelled partition or fixed glazing made of extruded and anodised alloy aluminium sections, fabrications after cutting to proper shape and size, drilling and aligning fitted with inbuilt locking arrangement cutting the glass / board (prelaminated / particle / block) to requisite shape and size moulding the edges fitted and fixed glazing clips and dry set neoprine /EPDM gasket, along with all other necessary arrangements for fixing the partition to walls, floors, beams, columns polysulphide sealant for water proofing if necessary complete in all respect as per drawing and specifications and direction of the Engineer in charge.For partitions using section of size:63.50 mm x 38.10 mm Gr. Floor |
| 33 | Dismantling all types of masonry excepting cement concrete plain or reinforced. Stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.(a) In ground floor including roof. |
| 34 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In groung floor including roof. (a) upto 150 mm. thick . |
| 35 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any heightand in any floor including removing rubbish within a lead of 75 m as directed. |
| 36 | Godrej Hydraulic door closer fitted and fixed complete. Heavy type |
| 37 | (B) Prelaminated particle board conforming to IS: 3087 - 1985 and IS 12823 - 1990. Both side decorative laminate Exterior grade 12mm thick |
| 38 | Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 asper approved make, brand, finish and thickness with fitting, fixing the same onParticle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental chargesthereof. Gr. floor (a) Thickness of laminate 1 mm |
| 39 | Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-inCharge.[excluding the cost of supporting frame work and teak wood batten/Lipping] Gr. Floor6 mm |
| 40 | 12 mm |
| 41 | 19 mm |
| 42 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) |
| 43 | Supplying,fittingandfixing UPVCpipesA-typeandfittingsconformingtoIS : 13592-1992withallnecessaryclamps,nails,includingmakingholesinwall,flooretc.cuttingtrenchesinanysoil,thorough masonryconcretestructureetc. UPVC pipes.i) 110 mm. Dia |
| 44 | ii) Shoe-110 mm. Dia |
| 45 | Ordinarycementconcrete (mix 1:1:5:3)withgradedstonechips (20 mm.nominalsize)excludingshutteringandreinforcement,ifany,ingroundfloorasperrelevantIScodes, Pakurvariety. |
| 46 | Supplying, fitting & fixing Industrial Troughed Aluminium sheet (excluding the supporting frame work) of approved make & brand in alloy 3105 conforming to IS: 1254-1991 fitted and fixed with 75 mm & 25 mm Self tapping screw , EPDM Washer 16 mm dia & 3 mm th washer etc complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (Aluminium sheet tobe supplied by contractor). (i) In Roof - (a)With 0.91mm thick sheet |
| 47 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
