Rural Development And Panchayats Department has published Tender For Construction Of 30000 Litre Capacity Over Head Tank1 Nosworks Under J.J.Mfund 2023-24- Nilakkottaiblock - Tn-05-01Nlk.. Submission Date for this Tender is 21-12-2023. Over Head Tank Tenders in Dindigul Tamil Nadu. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | 1.Construction of 30000 litre Capacity Over Head Tank in Appavupillaipatty H/OKodanginaiyakkanpatty Est RS 16.75Lakhs |
2 | Earthworkexcavation and depositing on bank with an initial lead of 10m and lift of 2m in the following classification of soils as directed by TWAD Board officers. Hard stiff clay, block cotton, hard red earth shales, murram, ordinary gravel, stoney eart I st Depth |
3 | Earthworkexcavation and depositing on bank with an initial lead of 10m and lift of 2m in the following classification of soils as directed by TWAD Board officers. Hard stiff clay, block cotton, hard red earth shales, murram, ordinary gravel, stoney eartII nd Depth |
4 | Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
5 | Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification |
6 | R. Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers |
7 | For items 1.5m to 4.5m below GL |
8 | For items 0 to 1.50m below GL |
9 | For items 0m to 4.5m above GL |
10 | For items 4.51m to 7.32m above GL |
11 | For items 7.32m to 10.98m above GL |
12 | For items 10.98m to 14.64m above GL |
13 | For items above 14.64m & up to 18.30m from GL |
14 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) |
15 | PLANE SURFACES |
16 | Below G.L. |
17 | ABOVE G.L. to 3.30m |
18 | 5.30m . to 6.30m |
19 | 8.30m . to 9.30m |
20 | 11.31m to 12.30m |
21 | Curved Surface |
22 | 0 to 3.30mfrom floor level |
23 | Square column |
24 | Below G.L. |
25 | Ground level to 3.30 m |
26 | Square column |
27 | 3.31 to 4.30m |
28 | 4.31 to 5.30m |
29 | 5.31 to 6.30m |
30 | 6.31 to 7.30m |
31 | 7.31 to 8.30m |
32 | 8.31 to 9.30m |
33 | 9.31 to 10.30m |
34 | 10.31 to 11.30m |
35 | 11.31 to 12.30m |
36 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
37 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.(Contractor has to make his own arrangements for the supply of steel and binding wire) |
38 | FabricatFabrication, supply, delivery and fixing of outside MS ladder of 45cm wide made out Fabrication, supply, delivery and fixing of outside MS ladder of 45cm wide made out of 50x50x6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30cm c |
39 | Providing and fixing of RCC inner access ladder in RCC 1:1.5:3 (one cement, one and half sane! and three aggregates) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centering shuttering charges, mixing concrete cu |
40 | Providing PVC ventilating arrangements mosquito proof nylon net with 110 mm PVC pipes and cowl and as directed by TWAD Board officers |
41 | Providing cut stone slab in CM 1:3 and as directed by TWAD Board officers |
42 | Refilling the foundation with excavated earth including consolidation as directed by the TWAD Board officers.As per item l(a) + l(b) Less item 2,3 & 4A & 4B Total |
43 | Provision for pipe connection arrangements for inlet, outlet scour and overflow etc. including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc., complete and as directed by TWAD Board officers |
44 | 65 mm dia GI pipe inlet connection |
45 | 65 mm dia GI pipe for overflow &rain water harvesting pipe |
46 | 50 mm dia GI pipe for scour pipe |
47 | 65 mm dia GI pipe for Delivery pipe |
48 | 65 mm dia GI TEE |
49 | 65 mm dia GI 90" bend |
50 | 65 mm dia GIcoupler |
51 | 65 mm dia GI Union |
52 | 65 mm dia GIElbow |
53 | 65x 50 mm dia GIReducer (HEAVY) |
54 | 65 mm diaGM Gate valve |
55 | 50 mm diaGM Gate valve |
56 | Manhole cover 60 x 60 cm (heavy duty) with frame |
57 | Supplying, Delivary , Laying jointing and testing of 63mm dia PVC Pipes and specials for conveying main and branch Pumping main including earthwork, refilling etc.,complete as per Standard specification etc.,complete - For Inlet and Delivary line |
58 | Supply of 63mm dia PVC Pipe 4 Kg/sq.cm |
59 | Supply of 63mm dia PVC Coupler |
60 | Supply of 63mm dia PVC Elbow |
61 | Supply of 63mm dia PVC Tee |
62 | Supply of 63mm dia PVC MTA |
63 | 50 mm dia GI pipe for Delivary line |
64 | 50mm GI Elbow |
65 | 50mm dia GI Coupler |
66 | Provision for Housefhold connection with accessories |
67 | 63mm x 20mm Saddle piece |
68 | PVC Female Threaded Adapter for 20mm |
69 | G.M Ferrule |
70 | PVC Female Threaded Adapter for 20mm |
71 | Flow control valve (Local Rate) |
72 | 20mm GI union |
73 | Brass chromium plated screw down tap 15/12 mm dia (Heavy type) |
74 | 20mm dia PVC items Finolex (Or) Equivalent (with ISI Monogram) |
75 | Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches having bed width 1.25m & below for laying of pipes for water supply and sewerage works in the following type of soils as directed by Departmental officers ( 0.60 m width X 1.05 mDepth ) (Measurement as per Surveying Data with reference to Drawings) |
76 | Provsion for Name Board. |
77 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package} |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail