Aligarh Development Authrority-ADA has published Tender For Construction Of Gate On 45 Meter Wide Main Atal Marg Under Transport Nagar Yojana. Submission Date for this Tender is 27-12-2023. Gates Supply Tenders in aligarh Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | EARTH WORK |
| 2 | Cleaning junglesincluding uprooting of trunk vegetation grass, bushes, wood trees and sapling of girth upto 30cm measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50m outside the periphery of area cleared. UPPWD SOR-2022 SI No 259 |
| 3 | EXCAVATION infoundation inordinary Soil ( Loam, clay or sand ) including lift upto 1.5m and lead upto 30mand including filling wateringand rammingof excavated earth into the trenches or into the space between the building and thesides offoundation trenches or into the plinth and removal& disposal of surplus earthas directed by the Engineer-In-Charge upto a distanceof 30 m.from foundation trenches by hydraulic excavator/manual means. For building/drain work only |
| 4 | Filling available excavated earth in trenches, plinth, sides of foundation etc. in layer not exceeding 20cm in depth, consolidation each diposited layer by ramming and watering, lead upto 50m and for all lift DSR 2023 SI No 2.25 |
| 5 | Close timbering in trench including strutting,shoring and packing cavities (wherever required) complete (measurement to be taken of the face area of timbered).Depth not exceeding 1.5m DSR 2023 2.16.1 |
| 6 | Close timbering in trench including strutting,shoring and packing cavities (wherever required) complete (measurement to be taken of the face area of timbered).Depth from 1.5m to 3 m DSR 2023 2.16.2 |
| 7 | Extra for every additional lift of 1.50m or part thereof in excavtion/ banking excavated or stacked material.DSR 2023 SI NO. 2.26.1 |
| 8 | Sand filling in plinth including supply of necessary quality of sand from any distance at site of work and including watering and dressing etc required for proper completion of work. SOR-2022.SI NO.255 |
| 9 | Anti termite treatment |
| 10 | Supplying chemical emulsion in sealed containers including delevary as specifiedchlorpyriphos/Lindane emulsifiable concentrate of 20 % DSR 2023 SI NO.2.34.1 |
| 11 | Diluting and injecting chemiclal emulsion for POST CONSTRUCTIONAL antitermite treatment (excluding cost of chemical emulsion)along the external wall where the apron is not provided using chemiccal emulsion @7.5ltr/sqm of the vertical surface of the sustructure to a depth of 30cm including excavation channel along the wall & rodding etc.complete. (with chlorpyriphos/Lindane E.C 20% with 1% concentration) DSR 2023 SI. NO.2.35.1.1 |
| 12 | Along the external wall below conctrete or masonary apron using chemical emulsion @2.5ltr per lenear mtr including drilling and plugging holes etc.(with chlorpyriphos/Lindane E.C 20% with 1% concentration) DSR 2023 SI.NO.2.35.2.1 |
| 13 | Treatment of soil under existing floors using chemical emulsion @1ltr per hole,300mm apart including drilling 12mm dia holes and plugging with cement morta 1:2 to match the existing floor.(with chlorpyriphos/Lindane E.C 20% with 1% concentration) DSR 2023 2.35.3.1 |
| 14 | Treatment at point of contact of wood work by chemical emulsion by chlorpyriphos/lindane (in oil or kerosene based solution) @.5ltr/hole by drilling 6mm dia holes at downward angle of 45 degree at 150mm c/c and sealing the same. DSR 2023 2.35.5 |
| 15 | Extra for leveling &neatly dressing of disposal soil completely as directed by Engineer-in-charge DSR 2023 SI NO.2.36 |
| 16 | FORM WORK |
| 17 | Centring & shuttering for foundation, footing, bases of column etc for mass concrete. DSR 2023 SI NO.5.9.1 |
| 18 | Centring and shuttering for suspended floors such as roof, balcony ,landing and access platform DSR2023 SI NO.5.9.3 |
| 19 | Centring & shuttering for lintals,beams,plinth beams,girders,bressumers and cantilevers DSR 2023 SI NO.5.9.5. |
| 20 | Centring and shuttering for column,pillars,piers,abutments,posts&struts.DSR 2023 SI NO.5.9.6 |
| 21 | Centring and shuttering for archs,domes, vaults upto 6m span .DSR2023 SI NO.5.9.9 |
| 22 | Vertical and horizontal fins induvidually or forming box, louvers band, facia,eaves boards. DSR 2023 SI NO.5.9.13 |
| 23 | Centring and shuttering for moldings and cornices. DSR 2023 SI NO.5.9.17 |
| 24 | Extra foradditional height in centering and shuttering where ever required, with adequate bracing, propping etc.including cost of deshuttering and decentering at all levels over a height of 3.50m for every additional height of 1m or part of thereofSuspended floors, roofs, landings, beams and balconies (plan area to be measured) DSR 2023 SI NO.5.11.1 |
| 25 | RCC WORKS |
| 26 | M25 design mix concrete for up to plinth level DSR 2023 SI NO.5.33.1.1 |
| 27 | M25 design mix concrete for above the plinth level plinth level DSR 2023 SI NO.5.33.2.1 |
| 28 | 10% extra cement as per design mix are payable, when charecterstics strength are not meet at minimum cement content at 330kg/cum DSR 2023 SI NO.5.33 |
| 29 | STEEL REINFORCEMENT |
| 30 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level (Analysis of Rate) |
| 31 | INTERLOCKING TILES WORKS |
| 32 | Construction ofGranular Sub Base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to acheive the desired density, complete As per MORTH Specification 401/SI No 4.1 |
| 33 | Extra for earth work in embankment mechanically compacted to 95% proctor density in ordinary soil, excavation to be done in tne form of regular pits not exceeding 0.5m in depth and embankment to be in 20cm layers including ramming and dressing pulverization of the surface including supply of labour T&P etc Roller and water sprinkler.UPPWD SOR-2022 Si No 253(a) |
| 34 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M30 made by block making machine with strong vibratory compaction, of approved size, design and shape ,laid in requred colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc.all complete as per direction of Engineer in charge. DSR 2023 SI NO.16.68 |
| 35 | BRICK WORK |
| 36 | Brick work with common burn clay F.P.S (non modular ) brick of class desingnation 7.5 in foundation and plinth in 1:4 (1 cement:4 coarse sand) SOR 2022 SI NO.6.1.1 |
| 37 | Brick work with common burn clay F.P.S (non modular ) brick of class desingnation 7.5 in superstructure above plinth level up to floor v level in all shape and sizes in 1:4 (1 cement:4 coarse sand) SOR- 2022 SI NO.6.4.1 |
| 38 | 115 mm thick brick work in superstructure in 1:3 (1cement:3 coarse sand) SOR- 2022 SI NO.6.12.1 |
| 39 | PLASTER WORK |
| 40 | 12mm thick cement plaster of mix 1:4 (1 cement:4 coarse sand) SOR 2022 SI No 584 |
| 41 | 15mm thick cement plaster of mix 1:4 (1 cement:4 coarse sand) SOR 2022 SI No 2New |
| 42 | Smooth finishing of exposed surface of rcc work 6mm thick cement mortar(1:3) SOR 2022 SI No 13.16.1 |
| 43 | PAINTING WORK |
| 44 | Cup lock scaffolding for for exteriar services of structure such as challies DSR.2023.SI NO.24.2 |
| 45 | Painting with Distempring 1st quality acrylic distemper (ready mixed) SOR 2022 SI No (649+2x650) |
| 46 | Providing and applying white cement based putty ofaverage thickness 1mm of approved brand and manufacturer,over the plastered wall surface to prepared the surface even the smooth complete.SOR 2022 SI No13.80 |
| 47 | Forming groove of uniform size in the top layer of washed stone grit plaster in 15mm wide and 15mm deep size.DSR 2023.SI NO.13.73.1 |
| 48 | providing and layingDPC 40MM thick with cement concrete 1:2:4 SOR 2022 SI No 361(b) |
| 49 | 1:4:8 derived from natural sources 8 graded stone aggregate 40mm nominal size . SOR 2022 SI No 275(a) |
| 50 | 1:2:4 Cement concrete derived from natural sources 4 graded stone aggregate 20mm nominal size SOR 2022 SI No 279 |
| 51 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. D.S.R. 2023 Item No. 11.41.1 |
| 52 | Providing and laying rectified glazed ceramic tile tile of size 300x300mm or more1st quality to confirming to IS :15622 of approoved make in all colour, shades except white laid on 20mm thick cement mortar 1:4 jointing with gray cement slurry @3.30kg/sqm including pointing and jointing with withe cement and matching pigments etc. SOR-2023 SI NO.11.37 |
| 53 | ELECTRICAL WORK |
| 54 | Supply and fixingof 25mm dia pvc conduite pipe. Electricaldsr 2023 si no.1.21.2 |
| 55 | Providing and fixing hexagonal fan box DSR 2023 SI NO.10.18 |
| 56 | supply and fixing of metal box of following size of 150mm*75mm 60mm deepELECTRICAL DSR 2022 SI NO.1.22.3 |
| 57 | supply and fixing 3 pin junction boxelctrical DSR 2022 SI NO.1.33 |
| 58 | STEEL WORK |
| 59 | Providing and fixing 1mm thick m.s sheet door with frame of 40*40*6mm angle iron.DSR 2023 SI NO.10.5.1 |
| 60 | providing and fixing factory made ISI marked steel glazed doors, windows and ventilators including all completes. Dsr 2023 si no.10.11.1 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
