Tender For Yearly Rates Finalization And Contractor Panel For Dth 150/Rotary/Dth 115 Borewell/Tubewell For Year 2023-24, gadchiroli-Maharashtra

Tender For Yearly Rates Finalization And Contractor Panel For Dth 150 / Rotary / Dth 115 Borewell / Tubewell For Year 2023-24-1 A ) 150 Mm. Vyasache D.T.H. Vindhaankaam And Related Works. 1.01 Vindhaan Kama ( Wahatukisah ) ( Includes 200 / 215 Mm Diameter Reaming Drilling Work In Soil / Mud Strata And 150 Mm Diameter Drilling Work In Hard Rock ) ( Wet Drilling ) ( 10% Additional Rate Is Included. ) 424+42= 466 / - ) , 1.02 Efficiency Test By Flashing ( Air Lift Method ) After Completion Of Blasting Process 90 Degrees Which ( Half Hour ) 1.03 150 Mm Vyascha Atyacha Lokhandi Casing Pipe, M. S. E.R.W. Medium Claus ( Is:1239 ) 4.80 Mm. Jadi, ( With Socket ) 1.04 150 Mm Vyascha Atyacha Lokhandi Casing Pipe, 4.80 Mm. Rates Of Jadi, Lowering And Grouting ( 10% Additional Rates Are Included ) 147+15= 162 / - 1.05 150 Mm Vyascha Atyacha Cap For Lokhandi Casing Pipe, ( Is :1239 ) 1.06 150 Mm Vyasache D.T.H. 180 Mm For Cutting Purpose. Vyascha P.V.C. Casing Pipe 6 Kg / Cm2 ) ( Is:4985-9988 ) 1.07 150 Mm Vyasache D.T.H. 180 Mm For Cutting Purpose. Diameter ( 6 Kg / Cm 2 ) And ( 8 Kg / Cm 2 ) Pvc. Casing Pipe Casing Lowering, Handling And Grouting ( Up To 12 Meters ) ( 10% Additional Rate Is Included ) 109+11= 120 / - 1.08 For Casing More Than 12 Meters ( 10% Additional Rate Is Included ) 218+22= 240 / - 1.09 180 Mm Vyascha P.V.C. Casing Pipe 8 Kg / Cm 2 ) ( Is: 4985-9988 ) In Exceptional Circumstances / In Places With Rocky Ground And If Casing Pipe Is Necessary Beyond 40 Feet, Then Sadar Casing May Be Used With The Technical Approval Of Deputy Engineer And Geologist. 1.10 180 Mm Vyascha P.V.C. Cap For Casing Pipe Pipe 1.11 150 Mm. Vyasache D.T.H. 200 Mm For Cutting Purpose. Vyascha ( Outer ) P.V.C. Casing Pipe 8 Kg / Cm2 ) ( Is:4985-9988 ) 1.12 150 Mm. Vyasache D.T.H. 180 Mm For Cutting Purpose. Vyascha ( Outer ) P.V.C. Casing Pipe 6 Kg / Cm2 ) ( Is:4985-9988 ) 1.13 150 Mm. Vyasache D.T.H. 180 Mm For Cutting Purpose. Dia 7 ( Outer ) Lokhandi Casing Pipe, M.S.Erw Medium Class ( Is :1239 ) 2A ) 150 Mm. Rotary Drilling Work And Related Works. 2.01 Winding Work ( 10% Additional Rate Is Included ) 1197+120=1317 / - 2.02 Transport ( 3 Vehicle Transport ) 2.03 Gravel Packing ( 10% Additional Rate Included ) 505+51= 556 / - 2.04 Development ( 10% Additional Rate Included ) 1305 +131= 1436 / - 2.05 Bell Plug 2.06 Wooden Plank ( 1 M Long X 0.150 M Long X 0.200 M Deep ) 2.07 Lokhandi Clamps ( 1 M Long X 0.10 M Long X 0.01 M Wide ) 2.08 150 Mm Vyascha Bean Atyacha Lokhandi Casing Pipe, ( M.S. ) E.R.W. Medium Clause ( Is1239 ) , 4.8. Mm. Jadi 2.09 150 Mm Vyasacha ( M.S. ) E.R.W. Medium Class Lokhandi Casing Pipe ( Jalicha ) ( Is1239 ) , 4.8. Mm. Jadi 2.10 150 Mm. Rate Including Lowering And Welding Work Of Diameter Uninterrupted And Forged Lokhandi Casing Pipe ( 10% Additional Rate Is Included ) 166 +17= 183 / - 3 E ) 115 Mm. Diameter Of Drilling Machine ( Surface Bore / Probe Bore / Inwell Bore / Recharge Shaft, Jacket Welll, Bbt, Fsc, Sbt, Etc. ) 3.01 Dismantling Work ( Including Transportation ) ( Includes Reaming, Drilling Work Of 150 Mm Diameter Soil Strata And Wet Drilling Of 115 Mm Diameter. ( 10% Additional Rate Is Included. ) 368+37 = 405 / - , 3.02 ( After Completing The Drilling Hole, Capacity Test By Flashing ( Air Lift Method ) By Notching 90 Degree Whi ( Half Time ) 3.03 Labor For Lowering The Bench In Vihiri And Removing The Layer And Removing The Cutting Material From Vihiri With A Welcher. ( 10% Additional Rate Is Included. ) 1650 +165 = 1815 / - 220 + 22 = 242 / - 3.05 The Drilling Holes Taken For Bore Blasting Should Be Completely Extinguished After Blasting For Safety Reasons ( The Same Rate Will Be Applicable Only For Extinguishing The Drilling Holes Dug Under Jacket Well, Bbt, Sbt ) 3.06 125 Mm Vyasachya Atyachya Lokhandi Casing Pipe ( M.S. ) E.R.W. Medium Claus ( Is:1239 ) 4.8 Mm Socket ( With Socket ) 3.07 125 Mm Vyascha Atyacha Lokhandi Casing Pipe Lowering And Grouting Rate Basis Cost 4.8 Mm. Jadi ( 10% Additional Rate Is Included ) 123 +12= 135 / - 3.08 125 Mm Vyasachya Atyachya Cap For Lokhandi Casing Pipe ( Is:1239 ) 3.09 115 Mm Diameter For Vent / Hole 140 Mm. Diameter 4 Kg / Cm2 Pvc Casing Pipe Is 4985-1988 3.10 115 Mm Diameter Hole / Hole 140 Mm. Diameter 6 Kg / Cm2 Pvc Casing Pipe As Per Is 4985-1988 3.11 140 Mm Diameter 4 Kg / Cm2 P. Wh. C. Rates For Casing Pipe Lowering And Grouting ( 10% Additional Rates Are Included ) 43+4= 47 / - 3.12 140 Mm Diameter 6 Kg / Cm2 P. Wh. C. Rates For Casing Pipe Lowering And Grouting ( 10% Additional Rates Are Included ) 64+6= 70 / - 3.13 140 Mm Diameter Pvc Cap For Casing Pipe 3.14 Pvc Used For Recharge Shaft. Making Mesh At Suitable Place For Casing Pipe 4 O ) Hand Pump Bulge And Hand Pump Ota Bandhani Rate 4.01 Hand Pump Urbhavani India Mark 2 / India Mark 3 / Extra Deepwell / Vlom / 50 Pump, ( Sudder With Rising Pipe And Connecting Rod ) ( 10% Extra Rate Included ) 1628+163 = 1791 / - 4.02 Excavation ( 10% Additional Rate Is Included ) 177+18= 195 / - 4.03 Dry Rubble Stone Filling By Direct Measurement 4.04 1:2:4 ( M-150 ) Cement Concrete As Per Direct Measurement. 4.05 Hand Pump Lifting And Kit Tying Work Per Vehicle ( 40 Km Long Range ) ( Vehicle Tempo / Mini Truck ) 4.06 Nameplate Lavane Size 60 X 80 Cm. 14 Gauge Ms Sheet, M.S. Angle Size 65 5 A ) Dual Pump Stirring 5.01 Special Water Chamber Chamber ( Galvanized ) Specially Developed For Dual Pump Stirring Purpose. 5.02 Stainless Stilche Bottom Nipple Required For Dual Pump Agitator Work + 6 A ) To Test The Efficiency Of Vindhan Vihirichi Electric Pump. 6.01 Carrying Out Efficiency Test Of Electric Pump For Drilling Rigs, Along With Electric Generators For Drilling Rigs, 6.02 Vindhan Vihirs Water Breaking Works, Flashing, Capacity Testing, Removal And Installation Of Hand Pumps, Vindhan Vihirs Special Repairs. 7 A: ) 150 / 115 Mm. Rejuvenation / Redrilling / Flashing Of Diameter Drilling Holes Along With Transportation Rate 7.01 150 / 115 Mm Rate For Rejuvenating / Redrilling Flushing Of Diameter Drilling Well Along With Transportation ( Per Drilling Well )

INR 6655 /-

INR 133100.0 /-

Refer document