Rural Development And Panchayats Department has published Tender For Repair And Maintenance Of Panchayat Bhawan Near Bus Stand Mandi. ( Sh Civil Workand Water Supply & Sanitary Installations And Electrical Installations). Submission Date for this Tender is 20-12-2023. Electrical Maintenance Tenders in mandi Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Making the openingfor door/window /cleastory window. in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface including disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in change including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect. |
| 2 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm(fifty into twenty five milimetre), or base ties of 1.60 mm (One point sixty millimetre), pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm (two point five millimeter )thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Fixing with adjustable lugs with split end tail to each jamb. including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect. |
| 3 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :Thickness above 10 mm(ten millimetre) up to 25 mm twenty five millimetre). |
| 4 | Half brick masonry Cement mortar 1:4 (1 cement :4 coarse sand) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor alllevel.including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect. |
| 5 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.nominal concrete 1:3:6 or rich mix including equivelant design mix including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect. |
| 6 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 7 | Repairs to plaster with cement mortar 1:4 ( One cement :Four fine sand) of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete,including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Chargeincluding carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 8 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 9 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 10 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 11 | Providing and fixing Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. 25 mm (twenty five milimetre) thick shutters for cup board etc.Panelled or panelled & glazed shutters :including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 12 | Providing and laying vitrified floorTile 600x600 mm (six hundred into six hundred millimetre ) in (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 13 | Providing and fixing Kiln seasoned and chemically treated hollock woodwire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 14 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect. |
| 15 | Providing and fixing 35 mm thick (thirty-five mili metres) well seasoned hollock wood glazed shutters for doors, windows and clerestory windows using 4 mm (four mili metre) thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screwsincluding carriage as requiredcomplete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 16 | Removing dry or oil bound distemper,water proof cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 17 | Applying Primimg coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)including carriage of material with in all leads and lifts and other incidentals complete in all respect |
| 18 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 19 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 20 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 21 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 22 | Finishing walls with textured exterior paint of required shade : Old work (One or more coats) applied @ 1.82 ltr/10 sqm. including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 23 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Old work (one or more coats) including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 24 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 25 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 26 | 125x75x4 mm ( one hundred twenty five into seventy five into four) millimetre |
| 27 | 100x63x4 mm ( one hundredinto sixty threeinto four) millimetre |
| 28 | Providing and fixingTwin rubber aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 29 | Providing and fixing 250x16 mm( two hundred fiftyinto Sixteen millimetre ) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 30 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 31 | 150x10 mm (one hundred fifty into ten millimetre) |
| 32 | 200x10 mm (two hundredinto ten millimetre ) |
| 33 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 34 | 125 mm (one hundred twenty fivemillimetre) |
| 35 | 100 mm( one hundred millimetre) |
| 36 | Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete.including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 37 | Wheel 50 mm dia and below |
| 38 | Providing and fixing Polyester powder coated aluminium(minimum thickness of polyester powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) for fixed portion :including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 39 | Providing and fixing glazing With float glass panes of 8 mm thickness (weight not less than 20 kg/ sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 40 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more.including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 41 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 42 | Dismantling water closet, cistern, Wash basin, towel rail,upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead as directed by the Engineer-in- charge with in all leads , lifts and other incidentals complete in all respect . including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 43 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 44 | W.C. pan with ISI marked white solid plastic seat and lid |
| 45 | Providing and fixing White Vitreous China Wash basin cera, hindware or equivalent makesize 550x400 mm (five hundred fifty X four hundred mili meters)with a pair of 15 mm C.P. brass pillar taps wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 46 | Providing and fixing white vitreous china pedestal for wash basin cera, hindware or equivalent make completely recessed at the back for the reception of pipes and fittings. |
| 47 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 48 | Providing and fixing semi rigid pipe32mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 49 | Providing and fixing 100 mm sand cast Iron grating for gully trap. including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 50 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 51 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 52 | Providing and fixing C.P. Brass toilet paper holder : including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 53 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 :including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 54 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 55 | Providing and fixing 15 mm nominal boreC.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. includingcarriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 56 | Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 57 | Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 58 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 59 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 60 | Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 61 | Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : with common burnt clay FPS brick 7.5 |
| 62 | Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets :with common burnt clay FPS brick 7.5 |
| 63 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.internal work exposed on wall including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 64 | 15 mm nominal outer dia Pipes |
| 65 | 20mm nominal outer dia Pipes |
| 66 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge conealed work , including cutting chases and making good the wall etc.including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 67 | 15 mm nominal outer dia Pipes |
| 68 | 20 mm nominal outer dia Pipes |
| 69 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External Work. including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 70 | 15 mm nominal outer dia Pipes |
| 71 | 20 mm nominal outer dia Pipes |
| 72 | Providing and fixing PPR Unions 20mm including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 73 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External Work. including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 74 | Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe) |
| 75 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting and making good the walls and floors completeincluding carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 76 | 110mmx90mm (one hundred ten into ninty millimetre ) |
| 77 | 110mmx75mm (one hundred ten into seventy five millimetre ) |
| 78 | Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive. including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 79 | 110mm dia( One hundred ten millimetre ) |
| 80 | 75mm dia (Seventy five millimetre) |
| 81 | Providing and fixing PVC single equal branch with oval access door ISI marked insertion rubber washer 3mm thick boalts and nuts complete including fixing with approved adhesive complete. including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 82 | 110mm dia( One hundred ten millimetre ) |
| 83 | 75mm dia (Seventy five millimetre) |
| 84 | Proving and fixing PVC door bend with oval access door insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 85 | 110mm dia( One hundred ten millimetre ) |
| 86 | 75mm dia (Seventy five millimetre) |
| 87 | Providing and fixing PVC collars ISI marked including fixingwith approved adhesive etc. complete |
| 88 | 110mm dia( One hundred ten millimetre ) |
| 89 | 75mm dia (Seventy five millimetre) |
| 90 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete |
| 91 | 110mm dia( One hundred ten millimetre ) |
| 92 | 75 mm dia ( seventy Five millimetre ) |
| 93 | Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixd to wooden cleats with C.P. Brass screwsincluding carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 94 | Providing and fixing C.P. Brass towel rail of size 600mmx20mm complete with C.P. Brass brackets fixed to wooden plugs with CP brass screws complete including carriage of material with all leads and lifts. |
| 95 | Providing and fixing PVC "Y" junction with oval access door,insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 96 | 110 mm dia ( one hundred ten millimetre ) |
| 97 | 75 mm dia ( seventy Five millimetre ) |
| 98 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 99 | 15 mm dia nominal bore |
| 100 | 25 mm dia nominal bore |
| 101 | Making connection of 25-40 mm ( twenty five to forty)millimetre G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 102 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work):including carriage of material as requiredin all leads & lift in all levels and other incidentals complete in all respect |
| 103 | 20 mm nominal bore |
| 104 | 25 mm nominal bore |
| 105 | Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable complete as required.Group C. |
| 106 | Supplying and fixing metal box of (100mmx100mmx60mm)deep [ nominal size)on surface /recess with suitable size phenolic laminated sheets cover in the front includingproviding and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch connections, painting etd complete etc. as required. |
| 107 | Supplying and fixing metal box of (180mmx100mmx60mm)deep [ nominal size)on surface /recess with suitable size phenolic laminated sheets cover in the front includingproviding 6pin 15/16 amps socket outlet and fixing and 15/16 amps, modular switch, connections Vcomplete etc. as required. |
| 108 | Providing,installation,testing and commissioning of ceiling fan with regulator including wiring the down rod of standard length(upto 30 cm with 16/0.20 mm twin twisted flexible cotton braded copper cable including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. complete as required make Bajaaj , Sabse Tej Ceiling Fan 1200mm sweep, Category-A |
| 109 | Supplying and fixing Modular type Fan Regulator of good quality including soldering etc. as required complete in all respect. |
| 110 | Wiring for circuit/sub-main (2x10 Sq. mm.)with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthingcomplete as required. |
| 111 | Supplying and fixing brass batten / angle holder including connection etc. complete as required:- |
| 112 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan , making good the damages, connections testing and commissioning etc.complete as required:- |
| 113 | Exhaust Fan, Light duty, (Domestic) 300 mm sweep ( bajaj , hawell and equalent etc.) |
| 114 | Providing and installation of stationary storage type of 25 ltr capacity water heater ( Cat - B )(Geyser ) by means of Expansion - bolts with nuts and washers, including embedding ofExpansion - bolts in the wall, providing and fixing of Non - return valve, Dead weight safely valve, 2 No C.P. connection rods 1 8 " long , making good the damages, electrical connections, safety valve connections, testing an commissioning etc.complete as required. |
| 115 | Supplying and fixing LED Lamps 10 watts Havells make in the existing battan holders, pendent holder, wall bracket etc,complete as required. |
| 116 | Providing and fixing shock proof slim decorative extruded fixture with domestic electronic ballast, suitable for 36 watt ( FTL ) (T8), complete with all accessories ( excluding the T-8 Tube), connections, testing and commissioning etc.complete as required. 1*36 watt -FTL( T8) ( category-A) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
