Maharshi Dayanand University-MDU has published Tender For Supply Installation Testing Commissioning Of Modular Kitchen Equipments Including Electrical Work And Construction Of Faculty House Kitchen In Mdu, Rohtak. Submission Date for this Tender is 03-01-2024. Electrical Maintenance Tenders in rohtak Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | [10.30.3]Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 3. Dark shade pigment using ordinary cement |
| 2 | [10.37.1]Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 1. 25 mm thick |
| 3 | [10.62]Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 4 | [11.12.1]15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1. 1:3 (1 cement: 3 fine sand) |
| 5 | [11.17]Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge |
| 6 | [11.5.2]12 mm cement plaster of mix : 2. 1:3 (1 cement: 3 fine sand) |
| 7 | [11.58]Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete |
| 8 | [11.64.1]Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 9 | [11.67.1]Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 1. Water thinnable cement primer |
| 10 | [12.102.1]Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 1. 125 mm |
| 11 | [12.102.2]Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 2. 100 mm |
| 12 | [12.103.2]Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 2. Twin rubber stopper |
| 13 | [12.151]Providing and fixing fire resistant door frame of section50 x 60 mm on horizontal side and 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fasteners 14 Nos. ( 5 each on vertical style and 4 on horizontal style of size M10 x 80 )suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded). |
| 14 | [12.21.1]Providing and fixing factory made shutters of Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium `U` type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws, including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of `U` beading and hinges will be paidseparately). 1. 25 mm thick |
| 15 | [12.88]Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 35 kg and door width up to 700 mm), with necessary accessories and screws etc. complete. |
| 16 | [12.98.2]Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 2. 250x16 mm |
| 17 | [12.99.5]Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 5. 100x10 mm |
| 18 | [13.10.1]Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 1. 4.0 mm thick glass panes |
| 19 | [13.21.1]Supply and fixing Windows frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (Base steel as per IS 513) with zinc of 120 gm/sqm and Powder coated with pure Polyester powder up to 50 microns (as per approved colour), 3 Nos. 100mm butt - hinges 2mm thick, 6 Nos. 1.2mm thick CRCA electroplated stiffner, 6 Nos. M.S hold fast with split and tail welded to stiffner plate 200mm long, receiver for aldrop, weld less corner assembly with brackets and screws, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.6mm of approved shade, fixed in position including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per drawing, design, specification and entire satisfaction of Engineer-in-charge. 1. Door Frame of size 80mm x 50mm with 37mm wide single rebate for 35mm door shutter |
| 20 | [20.71.1]Supply, erection, testing of Ceiling fansIS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge 1. 48" (1200mm) |
| 21 | [22.10.1.1]Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 1.1. Kitchen sink with drain board 510x1040 mm bowl depth 250 mm |
| 22 | [22.101.1.1]Providing and fixing Unplasticised PVC connection pipe with brass unions : 1.1. 30 cm length 15 mm nominal bore |
| 23 | [22.104.1]Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 1. 15 mm nominal bore |
| 24 | [22.108.1]Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 1. 15mm nominal bore |
| 25 | [22.109]Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 26 | [22.110.1]Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. 1. 15 mm nominal bore |
| 27 | [22.166.3.1]Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 3.1. 180x150 mm size P type With common burnt clay non-modular bricks of class designation 7.5 |
| 28 | [22.179.3.1]Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: 3.1. Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : With common burnt clay non-modular bricks of class designation 7.5 |
| 29 | [22.181]Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 30 | [22.222.2.2]Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.2. Single Socket Type B 110mm o/d SWR UPVC pipe lines laid complete |
| 31 | [22.86.3]Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 3. 25 mm nominal outer dia Pipes |
| 32 | [22.94.6]Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): 6. 50 mm nominal bore |
| 33 | [23.21]Fixing of LED Down lighter 7 to 28 Watt on ceiling or in false ceiling , including cutting/making hole in ceiling including making connections etc as required |
| 34 | [23.22.4.7]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.7. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DBHorizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing) |
| 35 | [23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole |
| 36 | [23.22.5.8]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.8. Supply and erection of miniature circuit Breaker240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs FOUR POLE |
| 37 | [23.22.6.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 6.5. Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. FP RCCB 30ma sensitivity , 40 A |
| 38 | [23.22.7]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 7. Supply and erection of blanking sheet in existing distribution board. |
| 39 | [23.4.1.3]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 1.3. Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etcin 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group C |
| 40 | [23.4.3.3]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 3.3. Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switch Group C |
| 41 | [23.4.5.3]COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 5.3. Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group C |
| 42 | [23.5.6.2]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.2. Wiring main and sub mains in twosingle core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 2.50 Sqmm(1.1.80mm) |
| 43 | [23.5.6.3]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.3. Wiring main and sub mains in twosingle core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm) |
| 44 | [23.5.6.5]COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.5. Wiring main and sub mains in twosingle core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 10 Sqmm(1/3.50 mm) |
| 45 | [23.7.6.2]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. |
| 46 | [23.7.6.4]PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.4. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 40 mm dia. |
| 47 | [23.8.10.1]FITTING AND ACCESSORIES 10.1. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 1 & 2 Modules including combined plate for Telephone and data |
| 48 | [23.8.10.4]FITTING AND ACCESSORIES 10.4. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 6 Modules |
| 49 | [23.8.11.10]FITTING AND ACCESSORIES 11.10. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Blanking plate |
| 50 | [23.8.11.11]FITTING AND ACCESSORIES 11.11. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. RJ 45 Computer DATA socketoutlet for CAT 6 or CAT6e cable Modular type |
| 51 | [23.8.11.7]FITTING AND ACCESSORIES 11.7. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. step type Fan Regulator 2 modules 300 watt |
| 52 | [23.8.11.8]FITTING AND ACCESSORIES 11.8. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Telephone Socket outlet modular type |
| 53 | [23.8.4]FITTING AND ACCESSORIES 4. Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cm long M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job. |
| 54 | [24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. |
| 55 | [24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. |
| 56 | [24.1.6]EARTHING AND LIGHTENING ARRESTOR 6. Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required. |
| 57 | [24.2.4.1]LT CABLE 4.1. Laying of underground cable in pipe /existing open/closed trench etc as required:- 2.5 Sq mm to 10 Sq mm 2 to 4 Core |
| 58 | [24.2.4.2]LT CABLE 4.2. Laying of underground cable in pipe /existing open/closed trench etc as required:- 16 Sq mm to 35 sqmm 2 to 4 Core |
| 59 | [25.3.7]Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulationforwater circulation as per specifications. 7. 80mm dia. |
| 60 | [28.16]Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken up to 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately). For the purpose of measurement the entire treated surface will be measured. |
| 61 | [30.82.2]Making holes by cutting cores of appropriate dia in RCC floors and roofs of thickness up to 6` (six inches) for passing drain pipe and repairing the hole after insertion of drain pipe etc. including finishing-complete so as to make it leak proof. 2. Drain pipe of 100mm internal dia |
| 62 | [4.32]Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 63 | [4.8.1]Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead up to 50 m and lift up to 1.5 m : 1. All kinds of soil |
| 64 | [6.1.6]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) |
| 65 | [6.16]Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size). |
| 66 | [6.30.1]Centering and shuttering including strutting, propping etc. and removal of form for 1. Foundations, footings, bases of columns, etc. for mass concrete |
| 67 | [6.30.3]Centering and shuttering including strutting, propping etc. and removal of form for 3. Suspended floors, roofs, landings, balconies and access platform |
| 68 | [6.30.5]Centering and shuttering including strutting, propping etc. and removal of form for 5. Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 69 | [6.33.6]Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level 6. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 70 | [6.9.2]Providing and laying damp-proof course with cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size) 2. 40 mm thick |
| 71 | [7.20.1]Brick work with common burnt clay modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 72 | [7.23.1]Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor four level in cement mortar 1:6 (1 cement : 6 coarse sand) : 1. With non-modular bricks |
| 73 | [7.26]Brick work 7 cm thick with common burnt clay non-modular brick of class designation 10.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and up to floor four level. |
| 74 | [7.57]Dressed or moulded two brick cornice laid in cement sand mortar 1:4 including 12 mm thick cement plaster 1:4 or pointing, as required. |
| 75 | [8.26.2.2]Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 2.2. Granite of any colour and shade Area of slab over 0.50 sqm |
| 76 | [8.29]Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 77 | [9.10.1]Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 1. With residual type petroleum bitumen of grade VG -10 |
| 78 | [9.11.1]10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: 1. With common burnt clay non-modular brick tile of class designation 10 |
| 79 | [9.17.1]Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 1. In 75x75 mm deep chase |
| 80 | [9.18]Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 81 | [9.46.3]Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer`s specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 3. 12.5 mm thick tapered edge gypsum moisture resistant board |
| 82 | [9.57.2]Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 2. 110 mm diameter |
| 83 | [9.58.5.2]Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 5.2. Bend 87.5° 110 mm bend |
| 84 | [9.62.1]Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 1. 100 mm diameter |
| 85 | P/F multy trap of self cleaning design 100*75mm Supreme/finolex/prince make |
| 86 | P/F cast brass cleanout plug 100 mm dia ISI heavy duty |
| 87 | Providing and Fixing Waste coupling CP Brass 32mm dia (Jaquar/Essco/cera make) complete in all resect to the entire satisfaction of Engineer-in-charge. |
| 88 | Providing and Fixing Bottle Trap CP Brass 32mm dia (Jaquar/Essco/cera make) complete in all resect to the entire satisfaction of Engineer-in-charge. |
| 89 | Providing and Fixing Grating 100mm size (Chilly/highlife/camry make) complete in all resect to the entire satisfaction of Engineer-in-charge. |
| 90 | Providing and Fixing Ball Valve CP Brass 50mm dia with plastic float and brass rod of required length (HB/DRP/ZOLOTO make) complete in all resect to the entire satisfaction of Engineer-in-charge. |
| 91 | Providing and Fixing G.M. Float Valve with copper ball float and brass rod of required length 40mm dia (HB/DRP/ZOLOTO make) complete in all resect to the entire satisfaction of Engineer-in-charge. |
| 92 | Supply and erection of Recessed mounting 24 W circular energy efficient LED Light fitting with pressure die-cast aluminium heat sink and PC diffuse in white powder coated finish with integrated driver. Working hours minimum 50000 hours operation on single phase AC Supply complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work including making necessary connections etc. Make: Havells, Bajaj, Philips. |
| 93 | Supply and erection of 400 mm Dia Wall Fan complete in all repects complete as per directions of Engineer-in-Charge. Make: Havells, Bajaj, Orient/ Crompton. |
| 94 | Supply of 16 sq mm 4core copper wire Make: Havells, Anchor, RR Kabel/ Polycab |
| 95 | Supply of 6 sq mm 2 core copper wire Make: Havels, Anchor, RR Kabel /Polycab |
| 96 | Supply and Erection of LOW HEIGHT COOKING RANGE.Frame (Frame work of m.s.anlge duly painted, mounted on s.steel tubular legs with adjustable feet. Top and sides and under shelf of s.s.sheet. Hy-pressure gas burners with individual control valves. Cast iron pan support.) W=30, D=30, H=30 complete in all respect as per site requirement and as per entire satisfaction of Engineer-in-Charge of the work |
| 97 | Supply and Erection of THREE BURNER INDIAN RANGE.Frame work of m.s.anlge duly painted, mounted on s.steel tubular legs with adjustable feet. Top and sides and under shelf of s.s.sheet. The range will be complete. Hy-pressure gas burners with individual control valveswith three burners.. Cast iron pan support.W=72, D=30, H=34 plus 6, complete in all respect as per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 98 | Supply and Erection of IDLI STEAMERMaterial Stainless Steel, with hinged door.Capacity 108 idlis Power (Wattage) 3 Kw Provided with 12 nos. trays with 9 pockets in each tray (108 IDLI),complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 99 | Supply and Erection of BULK COOKER TILTING TYPE. Frying pan Of rectangular shaped, SS body with insulation, 10”depth and a pouring lip and the unit will be fitted with v type high pressure gas burner with control valve and pilot lamp. Tilting Mechanism and counter weight lid. (120Litre) complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 100 | Supply and Erection of BULK FRYER.Triple jacketed body of stainless steel sheet, Inner most jacketed of 16g thick with 12g thick dish ended bottom, second wall for air gap of 18g stainless steel sheet and outer insulation jacket also of 18g stainless steel sheet. The unit will have counter weight lid and tilting mechanism(50Ltr)complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 101 | Supply and Erection of WORKING TABLE WITH 2 UNDER SHELF. Frame work made of s.s.anlge top will have P.P./Nylon Board for chopping. size of chopping board W=48, D=30, H=34 plus 6, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 102 | Supply and Erection of WORKING TABLE WITH TWO SINK UNIT Top of 16G s.s.sheet, will have mounted on M.S. Angle and SS tubular legs with adjustable feet and two Top Sink bowl of SS Sheet. Sink Bowl size 18x18x12` on M.S. Angle and SS Tubular legs frame work. W=72, D=30, H=34 plus 6,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 103 | Supply and Erection of VEG CUTTING MACHINEAluminium casted body with ½ HP electric motor safety switch and double feed pusher for round flat and vertical shaped food items etc., the unit will be Table top model with easy to clean provision. Provided with 4 no cutting discs for slicing grating Dicing,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 104 | Supply and Erection of PULVERIZER MACHINEStainless steel sheet body,20g thick. the unit will have A top feeding tray and a housing of stainless steel casting With grinding plates and 3 type of meshes for variable type Of grinding requirements. The unit will be fitted with 1.5HP single Phase electric. 1.5HP, 3PH,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 105 | Supply and Erection of POTATO PEELERMotor Power 1.0 HP.Capacity 10 Kg / 5 Minutes.Input Voltage 240.Single Phase. SS body with inside peeling chamber having abrasive lining on M.S. Angle frame work. Capacity 10kgs,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 106 | Supply and Erection of WET GRINDERMaterial SS Stainless steel 304, Phase- Single phase MotorCapacity 1 HP,Voltage 230 Volts, Number Of Phase Single, Frequency 50 Hz, Rotation Speed 1440 RPM ,Material Grade SS 304, Weight 150, Features Granite quality Stones, Cap.10 ltr,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 107 | Supply and Erection of LOW HEIGHT TABLE Top of 16G s.s.sheet, will have mounted on M.S. Angle and SS tubular legs with adjustable feet. W=45, D=24, H=24, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 108 | Supply and Erection of CHAPPTI ROLLING TABLE Top of 16G s.s.sheet, will have mounted on M.S. Angle and SS tubular legs with adjustable feet with one bottom shelf. W=48, D=30, H=34 plus 6,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 109 | Supply and Erection of CHAPPTI PLATE WITH PUFFERFrame work of m.s.anlge, mounted on s.s.tubular legs frame work. All sides pannels and undershelf of s.s.sheet, top plate 10mm thick mild steel with cast iron puffing grills for puffing of chappaties. Complete with `V` shape LPG burners with individual cont. W=48, D=30, H=34 plus 6,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 110 | Supply and Erection of CHAPPTI COLLECTION TABLETop 4` height tray and undershelf of s.s.sheet on s.s.tubular legs, with adjustable feet. W=18, D=30, H=34,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 111 | Supply and Erection of WORKING TABLE WITH 2 UNDER SHELFTop of 16G s.s.sheet, will have mounted on M.S. Angle and SS tubular legs with adjustable feet and Under Shelves.W=24, D=30, H=34 plus 6, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 112 | Supply and Erection of GRIDDLE PLATEFrame work of M.S. Angle Top plate of 12mm thick mild steel all sides upto control pannel of ss sheet with one bottom shelf of ss sheet. Complete with gas burner pilot lamp and control valve. W=24, D=30, H=34 plus 6,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 113 | Supply and Erection of S.S EXHAUST HOOD (without ducting ,hanging and fans) Made of s.steel sheet, 22G thick duly welded and pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel and greese collection cup/s. W=60, D=36, H=18, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 114 | Supply and Erection of DOUGH KNEADERSS sheet mixing bowl and kneading arm on mild steel / cast iron Painted body with 2HP/3Ph Electric Motor 25 Ltr,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 115 | Supply and Erection of WORKING TABLE WITH 2 UNDER SHELFTop of 16G s.s.sheet, will have mounted on M.S. Angle and SS tubular legs with adjustable feet and Under Shelves.W=72, D=24, H=34 plus 6,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 116 | Supply and Erection of 4-DOOR CHILLERDouble walled `PUF` insulated s.s.sheet outer and inner body of s.s.sheet 0.8mm thick having hinged doors with rubber gascuts with Four Doors. Inside s.s.wire shelves on adjustable channel frame complete. Having condensor.W=48, D=30, H=72, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. Make:-EMMERSON/ TECUMSEH/ CARRIER, or Eqvl. compressor. |
| 117 | Supply and Erection of WORKING TABLE WITH 2 UNDER SHELFTop of 16G s.s.sheet, will have mounted on M.S. Angle and SS tubular legs with adjustable feet and Under Shelves. W=45, D=24, H=34 plus 6, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 118 | Supply and Erection of WATER COOLER SS Body or eqvl. 150 Ltr,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. Make:- Bluestar/Nirvana/Volts/Cellfrost |
| 119 | Supply and Erection of SINGLE SINK UNITTop Sink bowl of SS Sheet. Sink Bowl size 18x18x12` on M.S. Angle and SS Tublur legs frame work. W=24, D=24, H=34 plus 6,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 120 | Supply and Erection of 3-DOOR UNDER COUNTER CHILLERDouble walled `PUF` insulated s.s.sheet outer and inner body of s.s.sheet 0.8mm thick having hinged doors with rubber gascuts with Three Doors. Inside s.s.wire shelves on adjustable channel frame complete withHaving condensorW=72, D=30, H=34, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. Make:-EMMERSON/ TECUMSEH/ CARRIER, or Eqvl. compressor. |
| 121 | Supply and Erection of SANDWICH GIRLLERStainless Steel body with cast Iron grooved plates with Heating Elements on each plates. Total 3KW Load. Top Plate counter balanced. Complete with automatic Temp. Controller. Cap. JUMBO,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 122 | Supply and Erection of MICROWAVE OVEN Cap. 20 ltr,complete in all respect as per entire satisfaction of Engineer-in-Charge of the work. Make:- IFB or Any Equl. Model. |
| 123 | Supply and Erection of WORKING TABLE WITH 2 UNDER SHELF Top of 16G s.s.sheet, will have mounted on M.S. Angle and SS tubular legs with adjustable feet and Under Shelves W=54, D=24, H=34 plus 6,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 124 | Supply and Erection of BLENDER Multi function,Wet and dry application Model No. TM-800A 1.5 litre BPA free polycarbonate blending jar Variable speed with one touch auto timer Premium quality, transparent, virtually unbreakable container– Industrial high speed motor, real 3HP super power–Two in one stainless steel cutting blade Crushing ice in seconds,Precision technology JTC, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 125 | Supply and Erection of FRYERTable Top Model, SS Body with 6 Ltr capacity, frying pan removable type with lid. Complete with SS Frying basket 2.5 KW heating element with automatic Temp. Controller. Cap. 6 Ltrs,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 126 | Supply and Erection of VISI COOLERCapacity 400 Ltr , Temperature Range 1 - 10 deg C.Type. Upright Chiller with Lock.complete in all respect as per entire satisfaction of Engineer-in-Charge of the work.Make:- Cellfrost/Elanpro/Western/ Voltas/ Nirvana. |
| 127 | Supply and Erection of HOT BAIN MARIETop of 16G s.s.sheet, Bain Marie water tank of 18G s.s.sheet, fitted with 3.0 kw heating element with automatic temperature controller. Water outlet provision with drain valve, 3 sides covered with 20G s.s.sheet, Top to accommodate s.s.sheet Four Food Pans with GN pan 1x1x6` depth with lids. W=60, D=27, H=34 plus 12, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 128 | Supply and Erection of COLD BAIN MAIRESame as above but without Heating element, Ambient Temp. working. W=60, D=27, H=34 plus 12,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 129 | Supply and Erection of PICKUP COUNTER WITH 2 OHS Top of SS Sheet with Three side covered one bottom and one middle shelf and two nos. over head shelf 12` wide fitted with SS pipe verticals W=60, D=24, H=34 plus 12, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 130 | Supply and Erection of S.S RACK 5-TIER Five Nos. SS Sheet Shelves, welded with SS Tubler vertical with adjustable feet.W=24, D=27, H=72,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 131 | Supply and Erection of S.S RACK 5-TIERFive Nos. SS Sheet Shelves, welded with SS Tubler vertical with adjustable feet.W=36, D=18, H=72, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 132 | Supply and Erection of DISH LANDING TABLE WITH GARBAGE CHUTESS Sheet Top with marine edge all around and a Garbage chute on M.S. Angle and SS Tublur legs frame work. W=60, D=24, H=34 plus 6, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 133 | Supply and Erection of TWO SINK UNITSame as above but with Two Sink Bowl. W=48, D=24, H=34 plus 6,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 134 | Supply and Erection of WORKING TABLE WITH 2 UNDER SHELF Top of 16G s.s.sheet, will have mounted on M.S. Angle and SStubular legs with adjustable feet and Under Shelves. W=30, D=24, H=34 plus 6, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 135 | Supply and Erection of PICK UP COUNTER WITH 2 OHS Top of SS Sheet with Three side covered one bottom and one middle shelf and two nos. over head shelf 12` wide fitted with SS pipe verticals W=60, D=30, H=34 plus 12, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 136 | Supply and Erection of S.S EXHAUST HOOD (without ducting , hanging and fans)Made of s.steel sheet, 22G thick duly welded and pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel and greese collection cup/s.W=72, D=36, H=18,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 137 | Supply and Erection of S.S EXHAUST HOOD(without ducting , hanging and fans) Made of s.steel sheet, 22G thick duly welded and pop rivetted as required. The hood will be complete with s.s.sheet removable type baffle filters. Complete with greese collection channel and greese collection cup/s. W=48, D=36, H=18,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 138 | Supply and Erection of DEEP FREEZER 400 LTRScomplete in all respect as per entire satisfaction of Engineer-in-Charge of the work. Makes:- Blue Star/voltas/Godrej) |
| 139 | Supply and Erection of S.S RACK 5-TIER Five Nos. SS Sheet Shelves, welded with SS Tubler vertical with adjustable feet. W=48, D=18, H=72, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 140 | Supply and Erection of BINS Made of SS Sheet with lid mounted on wheels. W=24, D=24, H=24, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 141 | Supply and Erection of COLD ROOM External Room Dimensions : 3600X3000mmCHILLER Room Temperature - ( plus2°C to 8 °C) , Product Entering Temp -plus30°C , Pull Down Time - 15hrs., Product Loading - App.550kg./24hrs., Wall and Ceiling Panels Insulation - 80mm thick Prefabricated RPUF Panels Floor Panel Insulation - 80mm thick RPUF Panels with layer of Tarfelt sheet on both sides. , Panel Finish - Internal :PCGI , External: PCGI, Refrigerant -R-22, No. of Units - 1Connected Load - 2.5 KW Size: 10`X10``X10`X5`,complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work.Make:- EMMERSON/ TECUMSEH/ CARRIER, or Eqvl. |
| 142 | Supply and Erection of COLD ROOM RACK Vertical of 32 mm dia stainless steel pipe with adjustable feet 4 no of 18 S.S wire shelves at equaly distance.W=48, D=18, H=72, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 143 | Supply and Erection of Hood Fixing Ducting Exhaust fans and Fresh Air Supply and LPG Line as per required layout of drawing work 1. Exhaust Hoods Fixing and Ducting for Hoods: - Made of GI Sheets as per site Conditions duly fabricated. 2. Axial Fans for Extraction of Smoke etc. 500 mm Dia. 1.5 HP 3 Ph. Electrical Motor housed In a MS Sheet Enclosure. Qty 3 Nos. 3. Air Washer Unit for Fresh Cool Air. Double Skin GI Powder Coated Body Complete with Honeycomb Cellulose Cooling Pads. S S Water Tank. 5.0 HP 3Ph Motor and 0.5 HP water pump. 4. Ducting for Fresh Air Fabricated out of GI Sheet with Leak-proof Joints. 5. Diffuser Grills made of by Gauge Aluminum Extruded Section duly Powder Coated. Qty 12 pcs, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
| 144 | Supply and Erection of WORKING TABLE WITH 2 UNDER SHELFTop of 16G s.s.sheet, will have mounted on M.S. Angle and SS tubular legs with adjustable feet and Under Shelves. W=60, D=30, H=34 plus 6, complete in all respectas per site requirement and as per entire satisfaction of Engineer-in-Charge of the work. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
