Tender For Installation Of Shml -Provision Of New Semi High Mast Poles With Led Fitting At Various Dark Spots At Ward No.148 In Ac43 From Mlalad Fund Under South Zone, Delhi-Delhi

Tender For Installation Of Shml -Provision Of New Semi High Mast Poles With Led Fitting At Various Dark Spots At Ward No.148 In Ac43 From Mlalad Fund Under South Zone ; 2 122.1.2:Supply Of Xlpe Insulated Pvc Sheathed Al. Conductor Armoured Cable 1.1Kv Grade Conforming To Is-7098 Of Following Size:-2C*6 Sqmm 3 122.2.19:Fabrication, Supplying, Installation, Testing, Commissioning Of 12 Mtr High Mast System With Its Accessories , Mast Shaft Shall Be In One Section , Hot Dip Galvanized 4Mm Thick ( Single Dip ) Inside & Out Sides &Suitable For Wind Velocity As Per Is 875 Part3 .There Shall Be In Longitudinal Seam Weld Per Section And No Circumferential Weld. It Should Also Included Accessories For High Mast Head Frame , 2 Point Suspension System, 5*2.5 Sqmm Cu Conductor With Steel Wire Rope 5Mm Dia. ( 7 / 19Construction ) Single Drum Winch , Galvanized Lantern Carriage Arrangement Suitable For 4 / 6 Nos. Flood Light Luminariessymmetrically And Its Control Gears Boxes And Lighting Finial , The Mast Shall Have Integral Type Manual Tool Mounted At The Base Compartment Of Its Raising And Lowering Operation With Foundation Bolts And Anchor Plate And Control Panelhousing Suitable Rcc ( 1:2:4 ) Shallowfoundation Of Size 1M ( L ) X 1M Wide And 2M Deep I / C Excavation Of Earth, Providing Cutting, Bending And Placing In Position, Reinforcement Of Cold Twisted Bars Of 12 Mm Dia -2100Mm Long ( Approx. ) - 16 Nos.And Reinforcement Of Cold Twisted Bar Of 8 Mm Dia - 3700 Mm ( Approx. ) - 13 Nos. ( With 150 Mm Spacing ) As Required With Positioning Of Foundation Bolts And Providing Dwc Hdpe Pipe For Cable Entry & Exit As Required For The High Mast Considering The Safe Soil Bearing Capacity At Site As 10T / Sqm At 2Mts. Depth With All Material I / C 4Nos S.P Mcb, 63Amp.Dpisolator Etc As Reqd. Logo / Name Of Manufacturer Shall Be Embossed On The Pole. Galvanization As Per Relevant Is. 4 Od19029 / 2023-2024:Supply And Fabrication Of Pole Protection System Made Up 8 Swg Steel Wire Mesh Of Size 25 Mm X 75 Mm Rectanglar With 50 Mm X50 Mmx6mm Ms Angle Iron For Supporting The Mesh I / C Mv Danger Plate And Grounding The Protection System In Suitable Quality Of Cc Etc. 5 Civil Dsr Rate And Ar 6 110.10:Providing And Fiving Name Board Made Of Ms Sheet 90X60cm, 1Mm Thick With Frame Of Ms Angle 50X50x6mm, Two Diagonal Braces At The Back Of The Sheet Of Ms Flat 40X6mm, Total Height Of The Board Above Ground Level 2.40M, Length Of Legs Below Ground 0.30M Embedded In Cc Block 1:2:4 ( 1 Cement: 2 Coarse Sand: 4 Graded Stone Aggregate 20Mm Nominal Size ) 30X30x45cm Including Excavation And Removal Of Surplus Earth With In 50M Lead, Applying Priming Coat Of Approved Steel Primer, Painting With Synthetic Enamel Paint Of Approved Quality And Lettering With Enamel Paint Of Approved Colour ( One Side ) As Per Drawing / Direction Of Engineer-In-Charge 7 Dsr 2022 8 Od19031 / 2023-2024:Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required. 9 Od19032 / 2023-2024:Excavation Of The Cable Trenches In Hard Rock Not Exceeding 1.5 Metres In Width, And Lift Upto 1.5 Metres, Including Getting Out The Excavated Soil And Disposal Of Excavated Soil As Directed Within A Lead Of 50 Metres. 10 Od19033 / 2023-2024:Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc. In The Existing Trench, Complete As Required.63 Mm· Dia ( Od-63 Mm & Id-51 Mm Nominal ) 11 Od19034 / 2023-2024:Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface / Recessed Conduit / Submain Wiring / Cable As Required. 12 Od19035 / 2023-2024:Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc / Hume / Metal Pipe As Required.Upto 35 Sq. Mm 13 Od19037 / 2023-2024:Providing And Laying In Position Cement Concrete 1 :3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) In Foundation Of Pump, Dg Set Etc. Including Form Work Etc. As Required. 14 Od19039 / 2023-2024:Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Masonry Open Duct As Required.Upto 35 Sq. Mm 15 Od19040 / 2023-2024:Earthing With G.I. Earth Pipe 4.5 Metre Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal / Coke And Salt As Required 16 Od19060 / 2023-2024:Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc..Direct In Ground ( 75 Cm Below Ground Level ) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc., Complete As Required. 63 Mm Dia ( Od-63 Mm & Id-51 Mm Nominal ) 17 Od19067 / 2023-2024:Supplying And Fixing Of Light Class G.I. Pipe Of 50 Mm Dia. ( Nominal ) 3 Metres Length Along The Pole For Protection Of Under Ground Cable As Required.

INR 590 /-

INR 39149.0 /-

INR 19.51 Lakhs /-

Work Name:Installation of SHML -Provision of new Semi High Mast poles with LED fitting at various dark spots at ward no.148 in AC43 from MLALAD fund under South Zone

Sl. No.	Item Description
1	AR
2	122.1.2:Supply of XLPE insulated PVC sheathed Al. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*6 sqmm
3	122.2.19:Fabrication,Supplying,Installation,testing,Commissioning of 12 mtr high mast System with its accessories ,Mast shaft shall be in one section , hot dip galvanized 4mm thick(Single dip ) inside & out sides &suitable for wind velocity as per IS 875 part3 .There shall be in longitudinal seam weld per section and No circumferential weld. It should also included accessories For High Mast head frame ,2 point suspension system, 5*2.5 sqmm Cu conductor with steel wire rope 5mm dia. (7/19construction) single drum winch ,galvanized lantern carriage arrangement suitable for 4/6 Nos. Flood Light luminariessymmetrically And its control gears boxes and lighting finial ,the mast shall have integral type manual tool mounted at the base compartment of its raising and lowering operation with foundation bolts and Anchor plate and control panelhousing suitable RCC (1:2:4) shallowfoundation of size 1m(L) x 1m wide and 2m deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia -2100mm long (approx.) - 16 nos.and reinforcement of cold twisted bar of 8 mm dia - 3700 mm (approx.) - 13 nos. (with 150 mm spacing) as required with positioning of foundation bolts and providing DWC HDPE pipe for cable entry & exit as required for the high mast considering The safe soil bearing capacity at site as 10T/sqm at 2mts. Depth with all material i/c 4Nos S.P MCB,63Amp.DPIsolator etc as reqd. Logo/Name of manufacturer shall be embossed on the pole. Galvanization as per relevant IS.
4	OD19029/2023-2024:Supply and fabrication of pole protection system made up 8 SWG steel wire mesh of size 25 mm x 75 mm rectanglar with 50 mm X50 mmX6mm MS angle iron for supporting the mesh i/c MV Danger Plate and grounding the protection system in suitable quality of CC etc.
5	civil dsr rate And AR
6	110.10:Providing and fiving name board made of MS Sheet 90x60cm, 1mm thick with frame of MS angle 50x50x6mm, two diagonal braces at the back of the sheet of MS flat 40x6mm, total height of the board above ground level 2.40m, length of legs below ground 0.30m embedded in CC block 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) 30x30x45cm including excavation and removal of surplus earth with in 50m lead, applying priming coat of approved steel primer, painting with synthetic enamel paint of approved quality and lettering with enamel paint of approved colour (one side) as per drawing/direction of Engineer-in-Charge
7	DSR 2022
8	OD19031/2023-2024:Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
9	OD19032/2023-2024:Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.
10	OD19033/2023-2024:Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.63 mm· dia (OD-63 mm & ID-51 mm nominal)
11	OD19034/2023-2024:Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
12	OD19035/2023-2024:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm
13	OD19037/2023-2024:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.
14	OD19039/2023-2024:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Upto 35 sq. mm
15	OD19040/2023-2024:Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required
16	OD19060/2023-2024:Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
17	OD19067/2023-2024:Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.